CS Paper Radar

Robust Beamforming and Power Allocation for Coherent Cell-Free Massive MIMO with Residual Calibration Errors

Mingjun Sun, Xidong Mu, Shaochuan Wu, Chongjun Ouyang, Hyundong Shin

eess.SP ·submitted 2026-08-11 08:24 UTC · v1

Abstract

This paper investigates robust downlink transmission to tolerate calibration aging in time-division duplex cell-free massive multiple-input multiple-output (CF-mMIMO) systems with residual calibration errors (RCEs). Unlike existing studies that typically treat RCEs as static impairments, we develop a time-evolving RCE model that characterizes the joint effects of residual phase mismatches, residual carrier frequency offsets, and oscillator phase noise. Based on this model, two practical processing architectures are considered: instantaneous calibrated-channel-based robust beamforming (BF) and statistical beamformed-channel-based robust power allocation (PA). For both architectures, tractable achievable rate lower bounds are derived, which explicitly reveal the impact of calibration aging on coherent combining, BF-gain uncertainty, and inter-user interference. Using these lower bounds as design metrics, we formulate an effective weighted sum-rate (EWSR) maximization problem over the data transmission interval, so that the resulting BF and PA designs can account for the temporal evolution of RCEs rather than a single calibrated instant. To efficiently solve the resulting problems, a Gauss--Legendre quadrature-based weighted minimum mean square error (WMMSE) optimization framework is developed, where both robust BF and PA are updated in an access point (AP)-block manner with closed-form solutions under per-AP power constraints. Simulation results demonstrate that: i) the proposed algorithms exhibit stable convergence; ii) the proposed robust BF and PA schemes achieve higher EWSR by explicitly accounting for calibration aging than their non-robust counterparts; and iii) robust BF achieves higher spectral efficiency (SE), whereas robust PA provides a more favorable tradeoff between SE and implementation cost in terms of computational complexity and fronthaul overhead.

Closest papers

Nearest neighbours by meaning across the whole index.

Robust Beamforming Design for Integrated Sensing and Communications with Mutual Coupling Effect

eess.SP ·2026-08-16 ·Jieon Maeng, Kawon Han
published similarity 0.66
Abstract · 5 pages, 5 figures, submitted to IEEE Wireless Communication Letters, 2026

Integrated sensing and communications (ISAC) is a key technology for next-generation wireless networks, enabling communication and radar sensing over shared spectral and hardware resources. In practical multi-user multiple-input multiple-output (MU-MIMO) ISAC transmitters, however, mutual coupling (MC) between antenna elements distorts the array steering vector and each communication user (CU) channel, so that the sensing beampattern deviates from the desired one and the communication link to each user degrades. To address this limitation, we propose a robust MC-compensated beamforming design that guarantees both the sensing and communication performance of MU-MIMO ISAC transmitters against the residual MC error. We introduce a residual error on the MC matrix, so that a norm-bounded residual error induces both the sensing beampattern uncertainty and the communication channel uncertainty. The transmit covariance is then optimized against the worst-case of each uncertainty, minimizing the worst-case beampattern matching mean-squared error (MSE) for sensing while guaranteeing the signal-to-interference-plus-noise ratio (SINR) for each CU. Each worst-case constraint is converted into a linear matrix inequality, and the problem becomes a convex semidefinite program (SDP). Numerical results show that the proposed robust design attains both a lower sensing beampattern matching MSE and a higher communication SINR than those of the conventional designs, with an advantage that widens as the residual error grows.

0.58

When Every Bit Counts in Quantized Beamforming: From CSI Feedback to Low-Resolution Hardware

eess.SP ·2026-10-20 ·Yasaman Khorsandmanesh, Parisa Ramezani, Emil Bjornson
similarity 0.65
Abstract

Multiple-input multiple-output (MIMO) is a key technology in modern wireless networks, but its performance is often analyzed under ideal hardware assumptions. In practical implementations, however, quantization appears throughout the signal-processing chain, including channel state information (CSI) feedback, fronthaul signaling, beamforming coefficients, data converters, and finite-resolution phase shifters. These impairments do not act independently: they alter the channel information available for beamforming, constrain the feasible transmit signals, and can ultimately limit beamforming gain and interference suppression. This article provides a perspective on quantized beamforming by connecting its main sources, performance implications, and mitigation strategies. We discuss codebook-based CSI feedback, quantization-aware beamforming, low-resolution converter modeling, and finite-resolution hybrid beamforming, and use representative numerical examples to illustrate when quantization becomes a dominant performance bottleneck. We further highlight emerging directions in joint beamforming and quantization design, adaptive-resolution architectures, and new antenna technologies with discrete hardware constraints. The key message is that finite-resolution effects should be modeled explicitly and incorporated into the beamforming design rather than treated as an afterthought.

0.20

GPU-Accelerated Robust Beamforming for OTFS Massive MIMO with CSI Uncertainty

cs.IT ·2026-09-28 ·Haonan Zhang, Weihua Wu
similarity 0.63
Abstract

This paper focuses on robust beamforming for orthogonal time frequency space (OTFS)-enabled massive multiple-input multiple-output (MIMO) systems under channel state information (CSI) uncertainty. In high-mobility satellite communications, uncertain CSI severely degrades beamforming accuracy and poses a major challenge to meeting users' quality of service (QoS) requirements. To address this challenge, we first formulate a chance-constrained optimization problem aiming to minimize the total transmit power while guaranteeing a predefined outage probability. Building on a 3D delay-Doppler-angle (DDA) channel representation, we propose a data-driven approach using support vector clustering (SVC) to model the uncertain CSI as an asymmetric uncertainty set. We then derive a robust counterpart that reformulates the intractable chance constraints into a deterministic semidefinite program. Finally, we design a graphics processing unit (GPU)-accelerated parallelizable alternating direction method of multipliers (ADMM) algorithm to address the computational complexity of large-scale antenna arrays. Simulation results show that the proposed SVC-based design reduces transmit power compared with conventional beamforming schemes, and that the GPU-accelerated ADMM achieves a speedup. These results confirm that the proposed framework achieves improved robustness, energy efficiency, and efficient computation in dynamic massive MIMO networks.

0.27

Reduced-Complexity WMMSE Approach for Cell-Free Massive MIMO Systems With Finite-Capacity Fronthaul Links

cs.IT eess.SP ·2026-11-11 ·Wonsik Yoo, Hoon Lee, Seok-Hwan Park
published similarity 0.62
Abstract

We propose a reduced-complexity weighted minimum mean squared error (R-WMMSE) framework for cell-free massive MIMO (CF-mMIMO) systems with finite-capacity fronthaul links. To maximize the system capacity, we need to jointly design beamforming vectors at distributed access points (APs) and fronthaul quantization noise covariances. Such a task would be addressed using conventional WMMSE algorithms and their variants. However, existing WMMSE-based methods either assume ideal infinite-capacity fronthaul links or incur high computational complexity when jointly optimizing the network-wide beamforming and fronthaul compression variables. To this end, the proposed method jointly optimizes beamforming and fronthaul compression by leveraging a sequential per-AP optimization strategy. Since each subproblem is efficiently solved via Lagrangian duality with closed-form updates, the overall computational complexity can be significantly reduced compared to the conventional WMMSE method. To further reduce hardware cost, we extend the R-WMMSE framework to hybrid analog-digital beamforming systems, tackling the joint design of digital beamforming, fronthaul compression, and analog beamforming. Numerical results show that the proposed scheme achieves performance nearly identical to that of the conventional WMMSE while reducing the runtime by over 99%.

0.36

Beyond RSRP: An Exploration of Alternative Metrics for Beam Management in an Urban Micro 5G NR Scenario

eess.SP ·2026-11-17 ·Saakshi Gupta, Tarun S. Cousik, Pratheek Upadhyaya, Nishith Tripathi, Jeffery Reed +1 more
similarity 0.61
Abstract

Reference Signal Received Power (RSRP) is widely used for beam selection in 5G NR as it is an easy indicator of path loss, but is not interference-aware, limiting its effectiveness in dense deployments. In this paper, we explore RSRP, Reference Signal Received Quality (RSRQ), and Signal to Interference-plus-Noise Ratio (SINR) as beam selection metrics alongside three UE-gNB association strategies in a 3GPP-compliant Urban Micro multi-cell simulation, benchmarked against Regularized Zero-Forcing (RZF) full-Channel State Information (CSI) upper bounds. Using a 3GPP-compliant Urban Micro multi-cell simulation benchmarked against RZF full-CSI upper bounds, we demonstrate two findings: directional RSRQ, despite its inter-cell interference awareness, is the worst-performing strategy in symmetric interference, and sequential association outperforms power-optimal Hungarian assignment. We also establish that the residual performance gap to full-CSI precoding stems from codebook quantization rather than metric imperfection, identifying adaptive codebook design as a mechanism to enhance performance.

0.26

Feedback-Free FDD Cell-Free Massive MIMO With Sparse AP Activation and Dual-Mode Precoding

cs.IT eess.SP ·2026-11-19 ·Wei Jiang, Hans Dieter Schotten
similarity 0.61
Abstract · 5 pages, 3 figures. Submitted to IEEE Transactions on Vehicular Technology

This correspondence enables practical frequency-division duplex (FDD) operation in cell-free massive MIMO via two mechanisms. Sparse access-point (AP) activation reduces downlink pilot overhead to enable coherent detection, while angle-reciprocity precoding steers beams using only uplink-estimated angles, eliminating channel feedback entirely. A load-adaptive dual-mode optimizer further enhances performance: closed-form signal-to-leakage-and-noise-ratio precoding for high-load rate boosting, or semidefinite relaxation for low-load power minimization. Simulations verify its superiority over existing feedback-free FDD solutions in spectral and energy efficiency, and its robustness to angle errors, reciprocity mismatch, and multipath.

0.39

Codebook-Based Effective CSI Feedback for Precoding Design in MIMO Systems

eess.SP ·2026-09-23 ·Bikshapathi Gouda, Antti Arvola, Juha Karjalainen, Sami Hakola, Antti Tölli
similarity 0.59
Abstract · Submitted to IEEE TWC

Downlink multi-user multiple-input multiple-output (MIMO) precoding with limited channel state information (CSI) feedback in multi-cell systems is studied. Conventional codebook-based CSI feedback compresses the UE-specific physical channels, which leaves an inherent mismatch between the base-station (BS) precoders and the interference-aware UE combiners. To address this limitation, an effective CSI (ECSI) feedback framework is proposed in which UEs compute their linear combiners from precoded downlink pilots, construct corresponding post-combining effective channels, and report compact quantized representations using the same payload structure as in conventional schemes. The BS reconstructs the effective CSI and iteratively refines its precoders through over-the-air signaling without incurring additional downlink overhead. Analytical expressions are derived to characterize the effective-channel estimation error under both conventional CSI and ECSI feedback, explicitly capturing the impact of beam selection and rank truncation. Simulations demonstrate fast convergence within a few iterations and up to 30\% average sum-rate improvement over conventional CSI-based precoding, with gains reaching 100\% at the 10th percentile of per-stream rates in interference-limited conditions.

0.29

MiLAC-Aided Beamforming for MIMO Over-the-Air Computation

cs.IT ·2026-08-13 ·Yaru Wang, Deyou Zhang, Qingchao Li, Jun Liu, Chuang Shi
similarity 0.59
Abstract

Over-the-air computation (AirComp) enables low-latency wireless data aggregation, but its accuracy is limited by imperfect signal alignment over fading channels and receiver noise. Fully digital beamforming improves aggregation accuracy in multiple-input multiple-output (MIMO) AirComp systems but requires one radio-frequency (RF) chain per antenna. To reduce this hardware burden, we investigate microwave linear analog computer (MiLAC)-aided beamforming for MIMO AirComp. Under a lossless and reciprocal MiLAC model, we jointly optimize the transmit digital precoding matrices and the receive-side MiLAC aggregation matrix to minimize the mean squared error (MSE). An alternating optimization algorithm is developed, in which the precoding matrices are optimally updated using the Karush--Kuhn--Tucker conditions and bisection, while the resulting convex aggregation matrix subproblem is solved globally using projected gradient descent. Numerical results verify the algorithm's convergence and demonstrate that MiLAC-aided beamforming approaches the MSE performance of fully digital beamforming with substantially fewer RF chains and outperforms phase-shifter-based hybrid beamforming under the same RF-chain budget.

0.04