CS Paper Radar

Fluid Antenna Array-Enabled Near-Field ISAC: Joint Port Position Optimization and Transmit Beamforming Design

Wangqi Shi, Zhentian Zhang, Hao Jiang, Zaichen Zhang, Kin-Fai Tong

cs.IT ·submitted 2026-11-02 12:04 UTC · v1

Abstract

Fluid antenna systems (FASs) have shown that activating a single port from a densely packed antenna array can yield spatial diversity comparable to that of tens of independent antennas, a property that has substantially improved communication reliability and efficiency. The fluid antenna array (FAA) extends this concept to multi-port configurations while avoiding complex multi-dimensional spatial correlation, and offers significant geometrical flexibility under a finite aperture and a limited port budget. These attributes motivate environment-adaptive array geometry for sensing in integrated sensing and communication (ISAC) systems. Although this flexibility enables adaptive array geometries that exploit near-field distance-angle information, improving multi-parameter target estimation under communication and deployment constraints remains challenging. In this paper, we propose a planar FAA-assisted near-field ISAC framework for multiuser communication and target sensing. Specifically, we derive the Fisher information matrix (FIM) and the corresponding Cramér-Rao bound (CRB) for the joint estimation of target range, zenith angle, azimuth angle, and radial velocity. Based on the derived CRB, we jointly optimize the FAA port positions and transmit beamforming to improve sensing accuracy while satisfying communication signal-to-interference-plus-noise ratio (SINR), transmit power, and physical deployment constraints. To solve the resulting non-convex problem, we develop a two-stage alternating optimization algorithm, in which transmit beamforming is optimized through semidefinite relaxation (SDR), while FAA port positions are successively optimized through discrete search and continuous refinement. Simulation results indicate that the proposed algorithm achieves favorable sensing performance while maintaining a reasonable computational cost.

Closest papers

Nearest neighbours by meaning across the whole index.

Array Rotation in Near-Field ISAC: Communication, Detection, and Estimation Under Low-Complexity Transmit Architectures

eess.SP cs.IT ·2026-10-22 ·Marziyeh Soltani, Mark F. Flanagan
similarity 0.76
Abstract

This paper studies near-field integrated sensing and communication (ISAC) with a rotatable base-station array under an exact spherical-wave propagation model. For a general transmit covariance, we derive a Cramér--Rao bound (CRB) decomposition that separates target-side geometry from transmit-covariance-dependent terms. We then specialize the framework to two representative low-complexity architectures: a single-stream superposition architecture, and a dual-waveform split architecture design. We characterize the communication-, detection-, and estimation-optimal rotations for each architecture using the exact finite-array model. In addition, we show how a second-order approximation yields compact approximate expressions for the optimal rotation angles. We also study uncertainty in the target state used for beamforming design through a correlated Gaussian perturbation model, and derive approximations of the optimal robust rotation angles for target sensing and detection. The analysis shows that the two architectures behave differently under rotation: the single-stream design can align communication and detection tasks, whereas the dual-waveform design exhibits a direct communication--detection tradeoff and can incur a larger communication loss when sensing is prioritized. Numerical results show clear gains over a fixed array orientation, especially for range estimation, and close agreement between the approximate and exact rotation choices. Detection is less affected by target-state errors than estimation in the considered cases.

0.11

Cramér-Rao Bound Analysis for Cell-Free ISAC Systems with Fluid Intelligent Metasurfaces

cs.IT ·2026-08-17 ·Changhao He, Jiguang He, Asmaa Abdallah, Ahmed M. Eltawil
similarity 0.76
Abstract · Correct the error in version1

Fluid intelligent metasurfaces (FIMs) reshape antenna geometry to improve angular sensitivity. This paper studies their role in cell-free integrated sensing and communication, where distributed access points provide distinct observation directions. Under calibrated path gains, we derive the conditional angular Fisher information matrix, retain cross-AP coupling, and map it to a position-domain Cramér--Rao bound (CRB). A diagonal-information specialization exposes the dependence on angular diversity, while a multi-target extension quantifies the loss from jointly estimating other target positions. We use CRB-driven coordinate search to design transmit and receive shapes and evaluate sensing performance, equal-resource AP scaling, and MRT-based communication--sensing allocation. In the considered four-Tx/four-Rx configuration, shape design reduces the position root CRB from 0.300 to 0.227 m at 10 dB reference SNR. Two-target results further illustrate how cross-target coupling increases the joint localization bound at small separations.

0.10

Joint Antenna Geometry and Transmit Covariance Design for Near-Field Multicast ISAC with Pinching Antenna Arrays

cs.IT ·2026-09-20 ·Hui Yang, Hao Feng, Ebrahim Bedeer, Ming Zeng, Mengyao Wang +2 more
similarity 0.72
Abstract · submitted IEEE journals

PASS provide a flexible waveguide-based architecture for reconfiguring wireless propagation environments and creating geometry-dependent radiating apertures. This paper investigates a near-field multicast ISAC system enabled by a lossy multi-waveguide PASS, where a base station transmits a common message to multiple communication users while simultaneously sensing one or multiple targets. The PA positions along the waveguides and the feed-domain transmit covariance matrix are jointly designed to improve sensing accuracy under multicast communication constraints. We first develop a near-field multicast ISAC signal model that accounts for waveguide attenuation, equal-radiated-power operation, geometry-dependent free-space propagation, and monostatic sensing. Then, we derive the FIM for target parameter estimation and obtain a compact projected-Jacobian representation by exploiting the block-diagonal PA transfer structure. This representation reveals how the PA geometry and transmit covariance jointly affect the CRB. Based on this structure, we further characterize the per-waveguide and cross-waveguide FIM contributions, the loss-aperture tradeoff, the identifiability condition, and the communication-sensing phase conflict. To minimize the CRB, we formulate a joint PA-position and transmit-covariance optimization problem subject to a multicast rate constraint, a feed-power budget, and PA deployment constraints. An alternating optimization algorithm is developed, where the covariance subproblem is solved as a semidefinite program and the PA-position subproblem is handled by waveguide-wise block coordinate descent.

0.22

Robust Beamforming and Antenna Position Optimization for MA-Assisted ISAC with Imperfectly Positioned MAs

eess.SP ·2026-09-20 ·Zeyuan Zhang, Ning Wei, Ahmad Bazzi, Boyang Jia, Huimin Tang +2 more
similarity 0.71
Abstract

This paper investigates robust beamforming and antenna position design for movable antenna (MA)-enabled integrated sensing and communication (ISAC) systems under antenna position errors. In particular, deviations between the actual and nominal antenna positions in practical MA arrays are inevitable due to limited mechanical accuracy. Therefore, the conventional ISAC design based on nominal positions may suffer from substantial performance degradation. To address this issue, we consider a monostatic downlink MA-ISAC system in which each transmission frame consists of a low-power pilot and an ISAC payload. The target angle, reflection coefficient, and antenna position-error vector are jointly estimated based on these two observations, thereby enabling sensing with imperfectly known antenna positions. We derive the resulting angle Cramer-Rao bound (CRB) and formulate a problem that minimizes its worst-case value subject to each user's signal-to-interference-plus-noise ratio (SINR) requirement under all possible position errors. By exploiting a common phase-response decomposition, we obtain tractable reformulations and develop an alternating optimization (AO) algorithm for the beamforming vectors and nominal antenna positions. Numerical results demonstrate that, compared with conventional nominal-position designs, the proposed robust scheme achieves improved communication reliability while maintaining competitive sensing accuracy under practical antenna position uncertainty.

0.13

Electromagnetically Consistent Monostatic ISAC Beamforming: Mutual Coupling, Active Mismatch and Tx-Rx Leakage in Compact Dipole Arrays

eess.SP ·2026-11-05 ·Stylianos D. Asimonis, Christos Tselios, Dimitrios Tyrovolas, Ilias Politis, George K. Karagiannidis
similarity 0.70
Abstract · 6 pages, 9 figures, 2 tables. Submitted to IEEE ICC 2027

Beamforming for integrated sensing and communication (ISAC) is usually designed on ideal array manifolds with a norm constraint on the transmit signal. In a compact monostatic transceiver this hides three antenna effects: distorted embedded patterns, beam-dependent active mismatch at the power amplifiers, and transmit-to-receive leakage that raises the radar noise floor. We build a multiport scattering model of a shared-aperture dipole array directly from method-of-moments simulations and use it to formulate a Cramer-Rao bound minimizing ISAC beamformer with multiuser SINR constraints, per-port active reflection constraints and a leakage budget, solved as a semidefinite program with a one-dimensional budget search. Full-wave evaluation shows that coupling-unaware designs miss their SINR targets by up to 6.2 dB and drive amplifiers to an equivalent VSWR above 3.3 at small spacings. For spacings from 0.3 to 0.5 wavelengths, the proposed design meets all targets with an equivalent VSWR below 2 and lowers the root Cramer-Rao bound by 32 to 53 percent for 80 dB of self-interference cancellation and by a factor of 3.4 to 5.6 for 70 dB. An independent finite-difference time-domain model of the final layout in openEMS confirms that the leakage null and the ranking of the designs are preserved.

0.24

Off-Grid Position Optimization under Mutual Coupling in Fluid Antenna Arrays

cs.IT ·2026-08-16 ·Jingyuan Xu, Jian Dang, Zaichen Zhang
similarity 0.70
Abstract

Fluid antenna arrays exploit continuous antenna repositioning within a finite aperture to provide geometry diversity beyond grid-constrained port selection. Every displacement, however, changes both the radiation response and the multiport mutual-impedance network, coupling geometry optimization with the source-voltage constraint. This paper develops an electromagnetic-aware (EM-aware) beamforming framework for planar fluid antenna arrays. Phase retrieval converts an amplitude-only shaped-beam specification into an aperture-compatible complex target, and an EM-aware orthogonal matching pursuit (OMP) method selects grid-constrained initial antenna positions. Continuous refinement then alternates exact voltage-constrained current optimization with movement-constrained projected adaptive moment estimation (Adam) updates of all physical antenna positions. Across independently perturbed symmetric dual-beam targets, the proposed method consistently improves the average mainlobe signal-to-noise ratio (SNR) and reduces the peak sidelobe level (PSLL) over a uniform array and discrete port selection.

0.32

Cooperative Target Localization in RIS-Enabled ISAC Systems

eess.SP ·2026-09-30 ·Rouhollah Amiri, Abdollah Ajorloo, Mohammad Mahdi Mojahedian, Ahmad Reza Hassanshahi, Fabiola Colone
similarity 0.70
Abstract

This paper develops a cooperative integrated sensing and communication (ISAC) framework in which a multi-antenna base station (BS) simultaneously localizes a target and serves multiple communication users, a subset of which is equipped with reconfigurable intelligent surfaces (RISs). The Fisher information matrix (FIM) for target positioning is derived, explicitly characterizing its dependence on the BS beamforming coefficients, RIS phase profiles, and bistatic sensing geometry. Under the stated scaling assumptions, coherent RIS phase alignment yields a Fisher-information gain that scales quadratically with the number of RIS elements, whereas independent random phases provide a linear gain in expectation. We formulate a sensing-centric joint active and passive beamforming problem that minimizes the position error bound (PEB) subject to per-user signal-to-interference-plus-noise ratio (SINR) and transmit-power constraints. The resulting non-convex problem is addressed through an iterative successive convex approximation (SCA) procedure that solves a sequence of convex subproblems. We further develop a target localization estimator that fuses one direct time-of-arrival (ToA) measurement, one angle-of-arrival (AoA) measurement, and multiple RIS-assisted indirect ToA measurements. Under small measurement errors and asymptotically efficient first-stage ToA/AoA estimation, the estimator covariance approaches the Cramér--Rao bound (CRB) to first order. Numerical results validate the analytical scaling laws and demonstrate the localization gains enabled by cooperative RIS-equipped users.

0.13

Intelligent Reflecting Surface for ISAC: From Beamforming to Joint Design With Surface Orientation

eess.SP ·2026-11-07 ·Qiaoyan Peng, Qingqing Wu, Guangji Chen, Yong Zeng, Sai Huang +3 more
similarity 0.69
Abstract

Rotatable semi-passive intelligent reflecting surfaces (SIRSs) provide an additional spatial degree of freedom (DoF) by proactively adjusting the orientation, while dedicated sensors directly receive target echoes. To exploit this DoF for integrated sensing and communication (ISAC), we investigate the joint optimization of SIRS rotation, base station (BS) transmit beamforming, and SIRS phase-shifts to minimize the Cramér-Rao bound (CRB) for target's spatial-frequency estimation subject to per-user communication signal-to-interference-plus-noise ratio (SINR) constraints. We first establish an orientation-dependent system model that characterizes the effective aperture gains, based on which the CRB is derived. To gain useful insights, closed-form expressions of the beamforming and rotation designs are derived in the sensing-only and communication-only cases. For the co-located user and target case, we further characterize the condition under which the sensing-oriented rotation design also satisfies the communication requirement. In the single-user single-target case with ideal unit aperture gains, we analyze the channel correlation and its impact on ISAC performance. For the general multi-user case, an effective method based on the genetic algorithm is developed. Numerical results demonstrate the superiorities of the rotatable SIRS over the fixed-orientation SIRS and show that jointly optimizing the SIRS orientation and beamforming can improve the effective aperture gains and the correlation between communication and sensing channels.

0.24