CS Paper Radar

Waveform Design for Simultaneous MIMO Radar Sensing and Multi-User Communication

Berkan Kilic, Kenan Turbic, Slawomir Stanczak

eess.SP ·submitted 2026-08-23 20:45 UTC · v1
publishedhighly cited

Abstract

This paper proposes a novel two-stage joint waveform design framework for multi-antenna Integrated Sensing and Communication (ISAC) systems that simultaneously enable Multiple-Input Multiple-Output (MIMO) radar sensing and Multi-User MIMO communication. First, a transmit waveform covariance matrix is designed by solving a convex matrix nearness problem for beampattern synthesis that simultaneously maximizes transmit power in desired directions and minimizes cross-directional correlations, while accommodating independent antenna power constraints and supporting interference suppression through radiation null steering. Second, a waveform conforming to the designed covariance is synthesized while additionally enforcing inter-user interference suppression via the zero-forcing approach and imposing practical implementation constraints, notably limiting the peak-to-average-power-ratio on the individual antenna elements. Simulation results demonstrate that the approach significantly enhances ISAC waveform design flexibility, performance, and computational efficiency compared to the alternative methods in the literature.

Journal ref
IEEE Journal on Selected Areas in Communications, vol. 44, pp. 263-277, 2026
DOI
10.1109/JSAC.2025.3610450

Closest papers

Nearest neighbours by meaning across the whole index.

ISAC Beamforming Design Based on a Matrix Nearness Formulation With Improved Efficiency

eess.SP ·2026-08-23 ·Berkan Kilic, Kenan Turbic, Slawomir Stanczak
published similarity 0.77
Abstract

We propose an integrated sensing and communication (ISAC) beamforming method that performs joint multiple-input multiple-output (MIMO) radar sensing and multi-user MIMO communication. Our approach builds on a matrix nearness formulation of the MIMO radar problem and utilizes our recently proposed efficient solver, where the computational complexity is dominated by an eigenvalue decomposition (EVD) evaluation at each iteration. We extend this formulation to an ISAC scenario by incorporating minimum signal-to-noise ratio constraints as communication design criteria, only requiring statistical channel state information knowledge at base station. Furthermore, we propose a method to avoid the burdensome EVD evaluations in certain iterations, reducing the computation time by up to six times in a massive MIMO setting.

0.52

Precision Coexistence: Angular-Spectral Region Constrained Waveform Design for MIMO-ISAC

cs.IT ·2026-10-21 ·Syed Ali Haider Shirazi, Taejoon Kim, David J. Love, Sergiy A. Vorobyov
published similarity 0.73
Abstract · Paper accepted for presentation at IEEE Conference on Integrated Sensing and Communications 2026

In this paper, we develop a dual-function waveform design framework for multiple-input multiple-output integrated sensing and communication (MIMO-ISAC) systems operating in congested electromagnetic environments. In such environments, the dual-function waveform must coexist with legacy systems, such as localized positioning sensors, maritime radar networks, and satellite communication links, that occupy specific frequency bands and angular sectors. To enable precision coexistence, we incorporate localized angular-spectral region constraints that suppress beamformed energy only within the angle-frequency regions occupied by each legacy system, while preserving the spatial degrees of freedom (DoFs) available outside those regions. The resulting waveform design problem is formulated as a nonconvex optimization problem and solved using a low-complexity majorization--minimization alternating direction method of multipliers (MM--ADMM) algorithm. Simulation results demonstrate that the proposed framework provides precise legacy-system protection while maintaining robust radar sensing and multi-user communication performance.

0.16

Robust Beamforming Design for Integrated Sensing and Communications with Mutual Coupling Effect

eess.SP ·2026-08-16 ·Jieon Maeng, Kawon Han
published similarity 0.73
Abstract · 5 pages, 5 figures, submitted to IEEE Wireless Communication Letters, 2026

Integrated sensing and communications (ISAC) is a key technology for next-generation wireless networks, enabling communication and radar sensing over shared spectral and hardware resources. In practical multi-user multiple-input multiple-output (MU-MIMO) ISAC transmitters, however, mutual coupling (MC) between antenna elements distorts the array steering vector and each communication user (CU) channel, so that the sensing beampattern deviates from the desired one and the communication link to each user degrades. To address this limitation, we propose a robust MC-compensated beamforming design that guarantees both the sensing and communication performance of MU-MIMO ISAC transmitters against the residual MC error. We introduce a residual error on the MC matrix, so that a norm-bounded residual error induces both the sensing beampattern uncertainty and the communication channel uncertainty. The transmit covariance is then optimized against the worst-case of each uncertainty, minimizing the worst-case beampattern matching mean-squared error (MSE) for sensing while guaranteeing the signal-to-interference-plus-noise ratio (SINR) for each CU. Each worst-case constraint is converted into a linear matrix inequality, and the problem becomes a convex semidefinite program (SDP). Numerical results show that the proposed robust design attains both a lower sensing beampattern matching MSE and a higher communication SINR than those of the conventional designs, with an advantage that widens as the residual error grows.

0.58

Robust Beamforming and Antenna Position Optimization for MA-Assisted ISAC with Imperfectly Positioned MAs

eess.SP ·2026-09-20 ·Zeyuan Zhang, Ning Wei, Ahmad Bazzi, Boyang Jia, Huimin Tang +2 more
similarity 0.68
Abstract

This paper investigates robust beamforming and antenna position design for movable antenna (MA)-enabled integrated sensing and communication (ISAC) systems under antenna position errors. In particular, deviations between the actual and nominal antenna positions in practical MA arrays are inevitable due to limited mechanical accuracy. Therefore, the conventional ISAC design based on nominal positions may suffer from substantial performance degradation. To address this issue, we consider a monostatic downlink MA-ISAC system in which each transmission frame consists of a low-power pilot and an ISAC payload. The target angle, reflection coefficient, and antenna position-error vector are jointly estimated based on these two observations, thereby enabling sensing with imperfectly known antenna positions. We derive the resulting angle Cramer-Rao bound (CRB) and formulate a problem that minimizes its worst-case value subject to each user's signal-to-interference-plus-noise ratio (SINR) requirement under all possible position errors. By exploiting a common phase-response decomposition, we obtain tractable reformulations and develop an alternating optimization (AO) algorithm for the beamforming vectors and nominal antenna positions. Numerical results demonstrate that, compared with conventional nominal-position designs, the proposed robust scheme achieves improved communication reliability while maintaining competitive sensing accuracy under practical antenna position uncertainty.

0.13

Electromagnetically Consistent Monostatic ISAC Beamforming: Mutual Coupling, Active Mismatch and Tx-Rx Leakage in Compact Dipole Arrays

eess.SP ·2026-11-05 ·Stylianos D. Asimonis, Christos Tselios, Dimitrios Tyrovolas, Ilias Politis, George K. Karagiannidis
similarity 0.67
Abstract · 6 pages, 9 figures, 2 tables. Submitted to IEEE ICC 2027

Beamforming for integrated sensing and communication (ISAC) is usually designed on ideal array manifolds with a norm constraint on the transmit signal. In a compact monostatic transceiver this hides three antenna effects: distorted embedded patterns, beam-dependent active mismatch at the power amplifiers, and transmit-to-receive leakage that raises the radar noise floor. We build a multiport scattering model of a shared-aperture dipole array directly from method-of-moments simulations and use it to formulate a Cramer-Rao bound minimizing ISAC beamformer with multiuser SINR constraints, per-port active reflection constraints and a leakage budget, solved as a semidefinite program with a one-dimensional budget search. Full-wave evaluation shows that coupling-unaware designs miss their SINR targets by up to 6.2 dB and drive amplifiers to an equivalent VSWR above 3.3 at small spacings. For spacings from 0.3 to 0.5 wavelengths, the proposed design meets all targets with an equivalent VSWR below 2 and lowers the root Cramer-Rao bound by 32 to 53 percent for 80 dB of self-interference cancellation and by a factor of 3.4 to 5.6 for 70 dB. An independent finite-difference time-domain model of the final layout in openEMS confirms that the leakage null and the ranking of the designs are preserved.

0.24

Joint Antenna Geometry and Transmit Covariance Design for Near-Field Multicast ISAC with Pinching Antenna Arrays

cs.IT ·2026-09-20 ·Hui Yang, Hao Feng, Ebrahim Bedeer, Ming Zeng, Mengyao Wang +2 more
similarity 0.66
Abstract · submitted IEEE journals

PASS provide a flexible waveguide-based architecture for reconfiguring wireless propagation environments and creating geometry-dependent radiating apertures. This paper investigates a near-field multicast ISAC system enabled by a lossy multi-waveguide PASS, where a base station transmits a common message to multiple communication users while simultaneously sensing one or multiple targets. The PA positions along the waveguides and the feed-domain transmit covariance matrix are jointly designed to improve sensing accuracy under multicast communication constraints. We first develop a near-field multicast ISAC signal model that accounts for waveguide attenuation, equal-radiated-power operation, geometry-dependent free-space propagation, and monostatic sensing. Then, we derive the FIM for target parameter estimation and obtain a compact projected-Jacobian representation by exploiting the block-diagonal PA transfer structure. This representation reveals how the PA geometry and transmit covariance jointly affect the CRB. Based on this structure, we further characterize the per-waveguide and cross-waveguide FIM contributions, the loss-aperture tradeoff, the identifiability condition, and the communication-sensing phase conflict. To minimize the CRB, we formulate a joint PA-position and transmit-covariance optimization problem subject to a multicast rate constraint, a feed-power budget, and PA deployment constraints. An alternating optimization algorithm is developed, where the covariance subproblem is solved as a semidefinite program and the PA-position subproblem is handled by waveguide-wise block coordinate descent.

0.22

Beamforming and Filter Design for Bistatic ISAC under Known and Unknown Transmit Symbols

eess.SP ·2026-08-17 ·Mohammad Hatami, Nhan Thanh Nguyen, Markku Juntti
publishedbenchmark similarity 0.66
Abstract · 5 pages, 3 figures. Accepted for presentation at the IEEE SPAWC 2026 conference

This paper investigates the joint design of beamforming and radar receive filters in a multiuser bistatic integrated sensing and communications (ISAC) system, aiming to maximize the minimum radar signal-to-interference-plus-noise ratio (SINR) under communications SINR and transmit power constraints. We consider two scenarios: transmitted signals are either known or unknown at the radar receiver. We develop tractable solutions to the resulting non-convex optimization problems in both cases. For the known-signal case, we derive closed-form radar receive filters and iteratively design beamforming using fractional programming (FP) and successive convex approximation (SCA). For the unknown case, we adopt an alternating optimization (AO) approach to jointly design the beamforming and receive filters. Numerical results demonstrate that, while both approaches achieve comparable performance under per-slot optimization, knowledge of the transmitted symbols provides significant gains in multi-slot processing via coherent integration. Moreover, the proposed ISAC designs perform close to the radar-only benchmark under moderate communication requirements.

0.56

A Smaller Subspace is All You Need: Efficient ISAC Beamforming via Dimensionality Reduction

eess.SP cs.IT ·2026-10-16 ·Ruiqi Liu, Yuanshuo Gang, Tianqi Mao, Qingqing Wu
similarity 0.65
Abstract · Submitted to an IEEE conference

Integrated sensing and communication (ISAC) has been recognized as a critical technology for the sixth generation (6G) wireless networks. Under monostatic sensing mode, achieving a balance between communication and sensing performance via optimal beamforming is a critical research problem. In multiple input multiple output (MIMO) systems, such beamforming problems are of substantial computational complexity due to the large number of antennas. Existing methods exploit exact subspaces of lower dimensions to speed up the beamforming process where the complexity is proportional to the number of communication users and sensing targets instead of antennas. In this paper, it is demonstrated that the beamforming problem can be solved in an even lower-dimensional subspace with only a small sensing performance loss. Numerical results compare the sensing performance and computational complexity of ISAC beamforming problem in the exact subspace and smaller subspaces.

0.14