CS Paper Radar

ISAC Beamforming Design Based on a Matrix Nearness Formulation With Improved Efficiency

Berkan Kilic, Kenan Turbic, Slawomir Stanczak

eess.SP ·submitted 2026-08-23 21:53 UTC · v1
published

Abstract

We propose an integrated sensing and communication (ISAC) beamforming method that performs joint multiple-input multiple-output (MIMO) radar sensing and multi-user MIMO communication. Our approach builds on a matrix nearness formulation of the MIMO radar problem and utilizes our recently proposed efficient solver, where the computational complexity is dominated by an eigenvalue decomposition (EVD) evaluation at each iteration. We extend this formulation to an ISAC scenario by incorporating minimum signal-to-noise ratio constraints as communication design criteria, only requiring statistical channel state information knowledge at base station. Furthermore, we propose a method to avoid the burdensome EVD evaluations in certain iterations, reducing the computation time by up to six times in a massive MIMO setting.

Journal ref
IEEE Wireless Communications Letters, vol. 15, pp. 1205-1209, 2026
DOI
10.1109/LWC.2026.3651195

Closest papers

Nearest neighbours by meaning across the whole index.

Waveform Design for Simultaneous MIMO Radar Sensing and Multi-User Communication

eess.SP ·2026-08-23 ·Berkan Kilic, Kenan Turbic, Slawomir Stanczak
publishedhighly cited similarity 0.77
Abstract

This paper proposes a novel two-stage joint waveform design framework for multi-antenna Integrated Sensing and Communication (ISAC) systems that simultaneously enable Multiple-Input Multiple-Output (MIMO) radar sensing and Multi-User MIMO communication. First, a transmit waveform covariance matrix is designed by solving a convex matrix nearness problem for beampattern synthesis that simultaneously maximizes transmit power in desired directions and minimizes cross-directional correlations, while accommodating independent antenna power constraints and supporting interference suppression through radiation null steering. Second, a waveform conforming to the designed covariance is synthesized while additionally enforcing inter-user interference suppression via the zero-forcing approach and imposing practical implementation constraints, notably limiting the peak-to-average-power-ratio on the individual antenna elements. Simulation results demonstrate that the approach significantly enhances ISAC waveform design flexibility, performance, and computational efficiency compared to the alternative methods in the literature.

0.58

A Smaller Subspace is All You Need: Efficient ISAC Beamforming via Dimensionality Reduction

eess.SP cs.IT ·2026-10-16 ·Ruiqi Liu, Yuanshuo Gang, Tianqi Mao, Qingqing Wu
similarity 0.70
Abstract · Submitted to an IEEE conference

Integrated sensing and communication (ISAC) has been recognized as a critical technology for the sixth generation (6G) wireless networks. Under monostatic sensing mode, achieving a balance between communication and sensing performance via optimal beamforming is a critical research problem. In multiple input multiple output (MIMO) systems, such beamforming problems are of substantial computational complexity due to the large number of antennas. Existing methods exploit exact subspaces of lower dimensions to speed up the beamforming process where the complexity is proportional to the number of communication users and sensing targets instead of antennas. In this paper, it is demonstrated that the beamforming problem can be solved in an even lower-dimensional subspace with only a small sensing performance loss. Numerical results compare the sensing performance and computational complexity of ISAC beamforming problem in the exact subspace and smaller subspaces.

0.14

Robust Beamforming Design for Integrated Sensing and Communications with Mutual Coupling Effect

eess.SP ·2026-08-16 ·Jieon Maeng, Kawon Han
published similarity 0.70
Abstract · 5 pages, 5 figures, submitted to IEEE Wireless Communication Letters, 2026

Integrated sensing and communications (ISAC) is a key technology for next-generation wireless networks, enabling communication and radar sensing over shared spectral and hardware resources. In practical multi-user multiple-input multiple-output (MU-MIMO) ISAC transmitters, however, mutual coupling (MC) between antenna elements distorts the array steering vector and each communication user (CU) channel, so that the sensing beampattern deviates from the desired one and the communication link to each user degrades. To address this limitation, we propose a robust MC-compensated beamforming design that guarantees both the sensing and communication performance of MU-MIMO ISAC transmitters against the residual MC error. We introduce a residual error on the MC matrix, so that a norm-bounded residual error induces both the sensing beampattern uncertainty and the communication channel uncertainty. The transmit covariance is then optimized against the worst-case of each uncertainty, minimizing the worst-case beampattern matching mean-squared error (MSE) for sensing while guaranteeing the signal-to-interference-plus-noise ratio (SINR) for each CU. Each worst-case constraint is converted into a linear matrix inequality, and the problem becomes a convex semidefinite program (SDP). Numerical results show that the proposed robust design attains both a lower sensing beampattern matching MSE and a higher communication SINR than those of the conventional designs, with an advantage that widens as the residual error grows.

0.58

Precision Coexistence: Angular-Spectral Region Constrained Waveform Design for MIMO-ISAC

cs.IT ·2026-10-21 ·Syed Ali Haider Shirazi, Taejoon Kim, David J. Love, Sergiy A. Vorobyov
published similarity 0.68
Abstract · Paper accepted for presentation at IEEE Conference on Integrated Sensing and Communications 2026

In this paper, we develop a dual-function waveform design framework for multiple-input multiple-output integrated sensing and communication (MIMO-ISAC) systems operating in congested electromagnetic environments. In such environments, the dual-function waveform must coexist with legacy systems, such as localized positioning sensors, maritime radar networks, and satellite communication links, that occupy specific frequency bands and angular sectors. To enable precision coexistence, we incorporate localized angular-spectral region constraints that suppress beamformed energy only within the angle-frequency regions occupied by each legacy system, while preserving the spatial degrees of freedom (DoFs) available outside those regions. The resulting waveform design problem is formulated as a nonconvex optimization problem and solved using a low-complexity majorization--minimization alternating direction method of multipliers (MM--ADMM) algorithm. Simulation results demonstrate that the proposed framework provides precise legacy-system protection while maintaining robust radar sensing and multi-user communication performance.

0.16

Toward Reliable and Accurate Predictive ISAC in Mobile mmWave Networks

eess.SP ·2026-09-24 ·Atefeh Rezaei, Vahid Jamali, Falko Dressler
similarity 0.67
Abstract

Integrated sensing and communications (ISAC) systems offer a promising framework for beam tracking, which enhances channel awareness and improves communication reliability in mobile millimeter wave (mmWave) networks. Motivated by this, we propose a low-complexity, model-driven channel state information (CSI) framework with integrated channel prediction capability in ISAC-enabled systems. To reduce the overhead of CSI acquisition and uplink feedback, the proposed framework leverages predicted target sensing parameters to construct partial CSI from both line-of-sight (LoS) and detected non-line-of-sight (NLoS) components. Exploiting this partial CSI, we formulate a beamforming optimization problem that minimizes the worst targets' Cramér-Rao bound (CRB) under per-user communication constraints. This problem is non-convex and highly non-linear; therefore, we develop an efficient suboptimal solution using successive convex approximation (SCA) and Schur-complement-based decomposition techniques, and we evaluate its complexity in comparison with other approaches. Moreover, since obtaining the absolute phase of the channel paths may require additional pilot resources, we formulate a robust beamforming design that does not assume this knowledge, and propose a solution based on sample averaging. Numerical results demonstrate that the ISAC-based robust channel prediction and localization framework significantly improves prediction accuracy and link reliability compared with conventional schemes, such as communication-based localization and tracking and separated sensing and communication. These results highlight the potential of ISAC for reliable, adaptive, and high-frequency, blockage-prone wireless networks. Furthermore, the performance of the proposed framework is evaluated under severe blockage scenarios, which further demonstrates enhanced network reliability.

0.16

MiLAC-Aided Beamforming for MIMO Over-the-Air Computation

cs.IT ·2026-08-13 ·Yaru Wang, Deyou Zhang, Qingchao Li, Jun Liu, Chuang Shi
similarity 0.67
Abstract

Over-the-air computation (AirComp) enables low-latency wireless data aggregation, but its accuracy is limited by imperfect signal alignment over fading channels and receiver noise. Fully digital beamforming improves aggregation accuracy in multiple-input multiple-output (MIMO) AirComp systems but requires one radio-frequency (RF) chain per antenna. To reduce this hardware burden, we investigate microwave linear analog computer (MiLAC)-aided beamforming for MIMO AirComp. Under a lossless and reciprocal MiLAC model, we jointly optimize the transmit digital precoding matrices and the receive-side MiLAC aggregation matrix to minimize the mean squared error (MSE). An alternating optimization algorithm is developed, in which the precoding matrices are optimally updated using the Karush--Kuhn--Tucker conditions and bisection, while the resulting convex aggregation matrix subproblem is solved globally using projected gradient descent. Numerical results verify the algorithm's convergence and demonstrate that MiLAC-aided beamforming approaches the MSE performance of fully digital beamforming with substantially fewer RF chains and outperforms phase-shifter-based hybrid beamforming under the same RF-chain budget.

0.04

Joint Association and Beamforming Design for Cooperative ISAC Systems

eess.SP ·2026-11-04 ·Abhishek Rajasekaran, Mehdi Karbalayghareh, Xiaoyan Ma, David J. Love, Christopher G. Brinton
theory similarity 0.66
Abstract · 6 pages, 5 figures

Cooperation among multiple base stations (BSs) improves both communication and sensing in integrated sensing and communication (ISAC) networks. However, it requires deciding which BSs serve each communication user (CU) and each target, and how each BS beamforms. In this work, we consider joint BS-CU and BS-target association, and beamforming for a general cooperative ISAC system, overcoming prior simplifications such as single-user or target setups, fixed BS roles, coherent radar or separate waveforms. We maximize a joint communication rate and position Cramer-Rao lower bound (CRLB) based tradeoff utility while guaranteeing a minimum service per-CU using a data queue model. We develop a successive convex approximation (SCA)-based beamforming with closed-form updates. The discrete association problem is solved as an overarching layer using a low-complexity algorithm. Numerical results validate the effectiveness of the algorithm and unveil benefits of cooperative communication and sensing.

0.26

Array Rotation in Near-Field ISAC: Communication, Detection, and Estimation Under Low-Complexity Transmit Architectures

eess.SP cs.IT ·2026-10-22 ·Marziyeh Soltani, Mark F. Flanagan
similarity 0.65
Abstract

This paper studies near-field integrated sensing and communication (ISAC) with a rotatable base-station array under an exact spherical-wave propagation model. For a general transmit covariance, we derive a Cramér--Rao bound (CRB) decomposition that separates target-side geometry from transmit-covariance-dependent terms. We then specialize the framework to two representative low-complexity architectures: a single-stream superposition architecture, and a dual-waveform split architecture design. We characterize the communication-, detection-, and estimation-optimal rotations for each architecture using the exact finite-array model. In addition, we show how a second-order approximation yields compact approximate expressions for the optimal rotation angles. We also study uncertainty in the target state used for beamforming design through a correlated Gaussian perturbation model, and derive approximations of the optimal robust rotation angles for target sensing and detection. The analysis shows that the two architectures behave differently under rotation: the single-stream design can align communication and detection tasks, whereas the dual-waveform design exhibits a direct communication--detection tradeoff and can incur a larger communication loss when sensing is prioritized. Numerical results show clear gains over a fixed array orientation, especially for range estimation, and close agreement between the approximate and exact rotation choices. Detection is less affected by target-state errors than estimation in the considered cases.

0.11