CS Paper Radar

Toward Reliable and Accurate Predictive ISAC in Mobile mmWave Networks

Atefeh Rezaei, Vahid Jamali, Falko Dressler

eess.SP ·submitted 2026-09-24 12:57 UTC · v1

Abstract

Integrated sensing and communications (ISAC) systems offer a promising framework for beam tracking, which enhances channel awareness and improves communication reliability in mobile millimeter wave (mmWave) networks. Motivated by this, we propose a low-complexity, model-driven channel state information (CSI) framework with integrated channel prediction capability in ISAC-enabled systems. To reduce the overhead of CSI acquisition and uplink feedback, the proposed framework leverages predicted target sensing parameters to construct partial CSI from both line-of-sight (LoS) and detected non-line-of-sight (NLoS) components. Exploiting this partial CSI, we formulate a beamforming optimization problem that minimizes the worst targets' Cramér-Rao bound (CRB) under per-user communication constraints. This problem is non-convex and highly non-linear; therefore, we develop an efficient suboptimal solution using successive convex approximation (SCA) and Schur-complement-based decomposition techniques, and we evaluate its complexity in comparison with other approaches. Moreover, since obtaining the absolute phase of the channel paths may require additional pilot resources, we formulate a robust beamforming design that does not assume this knowledge, and propose a solution based on sample averaging. Numerical results demonstrate that the ISAC-based robust channel prediction and localization framework significantly improves prediction accuracy and link reliability compared with conventional schemes, such as communication-based localization and tracking and separated sensing and communication. These results highlight the potential of ISAC for reliable, adaptive, and high-frequency, blockage-prone wireless networks. Furthermore, the performance of the proposed framework is evaluated under severe blockage scenarios, which further demonstrates enhanced network reliability.

Closest papers

Nearest neighbours by meaning across the whole index.

Robust Beamforming and Antenna Position Optimization for MA-Assisted ISAC with Imperfectly Positioned MAs

eess.SP ·2026-09-20 ·Zeyuan Zhang, Ning Wei, Ahmad Bazzi, Boyang Jia, Huimin Tang +2 more
similarity 0.71
Abstract

This paper investigates robust beamforming and antenna position design for movable antenna (MA)-enabled integrated sensing and communication (ISAC) systems under antenna position errors. In particular, deviations between the actual and nominal antenna positions in practical MA arrays are inevitable due to limited mechanical accuracy. Therefore, the conventional ISAC design based on nominal positions may suffer from substantial performance degradation. To address this issue, we consider a monostatic downlink MA-ISAC system in which each transmission frame consists of a low-power pilot and an ISAC payload. The target angle, reflection coefficient, and antenna position-error vector are jointly estimated based on these two observations, thereby enabling sensing with imperfectly known antenna positions. We derive the resulting angle Cramer-Rao bound (CRB) and formulate a problem that minimizes its worst-case value subject to each user's signal-to-interference-plus-noise ratio (SINR) requirement under all possible position errors. By exploiting a common phase-response decomposition, we obtain tractable reformulations and develop an alternating optimization (AO) algorithm for the beamforming vectors and nominal antenna positions. Numerical results demonstrate that, compared with conventional nominal-position designs, the proposed robust scheme achieves improved communication reliability while maintaining competitive sensing accuracy under practical antenna position uncertainty.

0.13

Robust Beamforming Design for Integrated Sensing and Communications with Mutual Coupling Effect

eess.SP ·2026-08-16 ·Jieon Maeng, Kawon Han
published similarity 0.69
Abstract · 5 pages, 5 figures, submitted to IEEE Wireless Communication Letters, 2026

Integrated sensing and communications (ISAC) is a key technology for next-generation wireless networks, enabling communication and radar sensing over shared spectral and hardware resources. In practical multi-user multiple-input multiple-output (MU-MIMO) ISAC transmitters, however, mutual coupling (MC) between antenna elements distorts the array steering vector and each communication user (CU) channel, so that the sensing beampattern deviates from the desired one and the communication link to each user degrades. To address this limitation, we propose a robust MC-compensated beamforming design that guarantees both the sensing and communication performance of MU-MIMO ISAC transmitters against the residual MC error. We introduce a residual error on the MC matrix, so that a norm-bounded residual error induces both the sensing beampattern uncertainty and the communication channel uncertainty. The transmit covariance is then optimized against the worst-case of each uncertainty, minimizing the worst-case beampattern matching mean-squared error (MSE) for sensing while guaranteeing the signal-to-interference-plus-noise ratio (SINR) for each CU. Each worst-case constraint is converted into a linear matrix inequality, and the problem becomes a convex semidefinite program (SDP). Numerical results show that the proposed robust design attains both a lower sensing beampattern matching MSE and a higher communication SINR than those of the conventional designs, with an advantage that widens as the residual error grows.

0.58

Low-Complexity Tensor-Based Channel Parameter Estimation for mmWave MIMO-Assisted Systems

eess.SP ·2026-10-08 ·Francisco I. T. Pires, Jean C. S. Ferreira, Fazal-E Asim
publishedtheory similarity 0.69
Abstract

This paper presents a low-complexity tensor-based channel estimation framework for downlink mmWave massive MIMO systems using passive Butler-matrix beamforming. By modeling received signals as a third-order PARAFAC tensor, we exploit known pilot structures via bilinear alternating least-squares (BALS) optimization to reduce computational overhead. The decoupled spatial factors are then processed via 1D and 2D ESPRIT to extract angles of arrival and departure with automatic pairing. Additionally, we derive the Cramer--Rao lower bound (CRLB) for this architecture. Simulations confirm the proposed estimator outperforms conventional least-squares, achieving accurate channel reconstruction and approaching the CRLB at moderate-to-high signal-to-noise ratios.

0.21

Cooperative Target Localization in RIS-Enabled ISAC Systems

eess.SP ·2026-09-30 ·Rouhollah Amiri, Abdollah Ajorloo, Mohammad Mahdi Mojahedian, Ahmad Reza Hassanshahi, Fabiola Colone
similarity 0.68
Abstract

This paper develops a cooperative integrated sensing and communication (ISAC) framework in which a multi-antenna base station (BS) simultaneously localizes a target and serves multiple communication users, a subset of which is equipped with reconfigurable intelligent surfaces (RISs). The Fisher information matrix (FIM) for target positioning is derived, explicitly characterizing its dependence on the BS beamforming coefficients, RIS phase profiles, and bistatic sensing geometry. Under the stated scaling assumptions, coherent RIS phase alignment yields a Fisher-information gain that scales quadratically with the number of RIS elements, whereas independent random phases provide a linear gain in expectation. We formulate a sensing-centric joint active and passive beamforming problem that minimizes the position error bound (PEB) subject to per-user signal-to-interference-plus-noise ratio (SINR) and transmit-power constraints. The resulting non-convex problem is addressed through an iterative successive convex approximation (SCA) procedure that solves a sequence of convex subproblems. We further develop a target localization estimator that fuses one direct time-of-arrival (ToA) measurement, one angle-of-arrival (AoA) measurement, and multiple RIS-assisted indirect ToA measurements. Under small measurement errors and asymptotically efficient first-stage ToA/AoA estimation, the estimator covariance approaches the Cramér--Rao bound (CRB) to first order. Numerical results validate the analytical scaling laws and demonstrate the localization gains enabled by cooperative RIS-equipped users.

0.13

ISAC Beamforming Design Based on a Matrix Nearness Formulation With Improved Efficiency

eess.SP ·2026-08-23 ·Berkan Kilic, Kenan Turbic, Slawomir Stanczak
published similarity 0.67
Abstract

We propose an integrated sensing and communication (ISAC) beamforming method that performs joint multiple-input multiple-output (MIMO) radar sensing and multi-user MIMO communication. Our approach builds on a matrix nearness formulation of the MIMO radar problem and utilizes our recently proposed efficient solver, where the computational complexity is dominated by an eigenvalue decomposition (EVD) evaluation at each iteration. We extend this formulation to an ISAC scenario by incorporating minimum signal-to-noise ratio constraints as communication design criteria, only requiring statistical channel state information knowledge at base station. Furthermore, we propose a method to avoid the burdensome EVD evaluations in certain iterations, reducing the computation time by up to six times in a massive MIMO setting.

0.52

Joint Association and Beamforming Design for Cooperative ISAC Systems

eess.SP ·2026-11-04 ·Abhishek Rajasekaran, Mehdi Karbalayghareh, Xiaoyan Ma, David J. Love, Christopher G. Brinton
theory similarity 0.65
Abstract · 6 pages, 5 figures

Cooperation among multiple base stations (BSs) improves both communication and sensing in integrated sensing and communication (ISAC) networks. However, it requires deciding which BSs serve each communication user (CU) and each target, and how each BS beamforms. In this work, we consider joint BS-CU and BS-target association, and beamforming for a general cooperative ISAC system, overcoming prior simplifications such as single-user or target setups, fixed BS roles, coherent radar or separate waveforms. We maximize a joint communication rate and position Cramer-Rao lower bound (CRLB) based tradeoff utility while guaranteeing a minimum service per-CU using a data queue model. We develop a successive convex approximation (SCA)-based beamforming with closed-form updates. The discrete association problem is solved as an overarching layer using a low-complexity algorithm. Numerical results validate the effectiveness of the algorithm and unveil benefits of cooperative communication and sensing.

0.26

Massive MIMO ISAC Under Target-Angle Uncertainty: CRLB Outage Analysis and Robust Resource Allocation

eess.SP ·2026-09-16 ·Smriti Uniyal, Tianyu Fang, Van-Dinh Nguyen, Hien Quoc Ngo, Markku Juntti +1 more
similarity 0.65
Abstract

In integrated sensing and communications (ISAC), the same spectral and hardware resources are shared for two functionalities. Most ISAC designs assume perfect target-angle information neglecting angle estimation errors, which introduce steering-vector mismatches, degrade sensing accuracy, and may invalidate deterministic sensing guarantees. This paper investigates monostatic massive multiple-input-multiple-output (MIMO) ISAC systems under imperfect target-angle estimates. We derive closed-form expressions for the Cramér-Rao lower bounds (CRLBs) of target azimuth and elevation estimates in the presence of angle uncertainty. We characterize the cumulative distribution functions and outage probabilities of the CRLBs under Gaussian, generalized uniform, and von Mises angle-error models. Our analysis reveals that, in the small-error regime, the CRLBs increase quadratically with the angle errors due to transmit steering-vector mismatch. To ensure reliable sensing, we propose a robust power allocation framework that jointly optimizes pilot training and communications/sensing transmission powers to maximize the communications sum rate while satisfying CRLB outage constraints. The resulting nonconvex problem is solved using an alternating-optimization algorithm based on successive convex approximation. Numerical results validate the developed analysis and show that the proposed robust design reduces azimuth and elevation CRLB outage probabilities by up to $60\%$ compared with conventional non-robust schemes. It attains up to $45\%$ higher sum rates than the non-robust design under strict CRLB thresholds.

0.20

Robust Resource Allocation for STAR-RIS-Assisted ISAC Networks Using Deep Learning

cs.PF ·2026-10-19 ·Yuwen Cao, Jiajun Wu, Howard H. Yang, Tomoaki Ohtsuki, Tony Q. S. Quek
theory similarity 0.64
Abstract

In this paper, we focus on investigating the resource allocation in an integrated sensing and communication (ISAC) system assisted by a simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS). Due to the coupled non-convex nature of the optimization problem, solving the above joint resource optimization problem while guaranteeing superior sensing performance is challenging, especially in dynamic environment. To conquer such challenge, prior iterative optimization algorithms have been presented. However, practical implementations of these prior algorithms face notable computational challenges, e.g., the reliance on accurate global channel information and the assumption of ideal phase shifts. In this context, we propose a model-driven deep learning framework for jointly optimizing the transmit beamforming and waveform in ISAC networks with low-overhead. In addition, we adopt the Cramer-Rao lower bound (CRLB) as the sensing performance metric, and the multi-user interference (MUI) energy as the communication performance metric for performance evaluation. Besides, our framework jointly optimizes the transmit beamforming, waveform and the STAR-RIS reflection/transmission coefficient matrices by minimizing the weighted sum of MUI energy and CRLB. Our study also considers the impact of imperfect channel information, making the research scenario more aligned with real-world applications. Simulation results validate that the proposed framework not only achieves higher sum-rate performance comparable to traditional iterative algorithms but also significantly reduces computational complexity in terms of algorithm execution time, as well as exhibits inherent robustness.

0.11