CS Paper Radar

Joint Association and Beamforming Design for Cooperative ISAC Systems

Abhishek Rajasekaran, Mehdi Karbalayghareh, Xiaoyan Ma, David J. Love, Christopher G. Brinton

eess.SP ·submitted 2026-11-04 18:09 UTC · v1
theory

Abstract

Cooperation among multiple base stations (BSs) improves both communication and sensing in integrated sensing and communication (ISAC) networks. However, it requires deciding which BSs serve each communication user (CU) and each target, and how each BS beamforms. In this work, we consider joint BS-CU and BS-target association, and beamforming for a general cooperative ISAC system, overcoming prior simplifications such as single-user or target setups, fixed BS roles, coherent radar or separate waveforms. We maximize a joint communication rate and position Cramer-Rao lower bound (CRLB) based tradeoff utility while guaranteeing a minimum service per-CU using a data queue model. We develop a successive convex approximation (SCA)-based beamforming with closed-form updates. The discrete association problem is solved as an overarching layer using a low-complexity algorithm. Numerical results validate the effectiveness of the algorithm and unveil benefits of cooperative communication and sensing.

Comment
6 pages, 5 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Beamforming and Filter Design for Bistatic ISAC under Known and Unknown Transmit Symbols

eess.SP ·2026-08-17 ·Mohammad Hatami, Nhan Thanh Nguyen, Markku Juntti
publishedbenchmark similarity 0.67
Abstract · 5 pages, 3 figures. Accepted for presentation at the IEEE SPAWC 2026 conference

This paper investigates the joint design of beamforming and radar receive filters in a multiuser bistatic integrated sensing and communications (ISAC) system, aiming to maximize the minimum radar signal-to-interference-plus-noise ratio (SINR) under communications SINR and transmit power constraints. We consider two scenarios: transmitted signals are either known or unknown at the radar receiver. We develop tractable solutions to the resulting non-convex optimization problems in both cases. For the known-signal case, we derive closed-form radar receive filters and iteratively design beamforming using fractional programming (FP) and successive convex approximation (SCA). For the unknown case, we adopt an alternating optimization (AO) approach to jointly design the beamforming and receive filters. Numerical results demonstrate that, while both approaches achieve comparable performance under per-slot optimization, knowledge of the transmitted symbols provides significant gains in multi-slot processing via coherent integration. Moreover, the proposed ISAC designs perform close to the radar-only benchmark under moderate communication requirements.

0.57

Cooperative Target Localization in RIS-Enabled ISAC Systems

eess.SP ·2026-09-30 ·Rouhollah Amiri, Abdollah Ajorloo, Mohammad Mahdi Mojahedian, Ahmad Reza Hassanshahi, Fabiola Colone
similarity 0.66
Abstract

This paper develops a cooperative integrated sensing and communication (ISAC) framework in which a multi-antenna base station (BS) simultaneously localizes a target and serves multiple communication users, a subset of which is equipped with reconfigurable intelligent surfaces (RISs). The Fisher information matrix (FIM) for target positioning is derived, explicitly characterizing its dependence on the BS beamforming coefficients, RIS phase profiles, and bistatic sensing geometry. Under the stated scaling assumptions, coherent RIS phase alignment yields a Fisher-information gain that scales quadratically with the number of RIS elements, whereas independent random phases provide a linear gain in expectation. We formulate a sensing-centric joint active and passive beamforming problem that minimizes the position error bound (PEB) subject to per-user signal-to-interference-plus-noise ratio (SINR) and transmit-power constraints. The resulting non-convex problem is addressed through an iterative successive convex approximation (SCA) procedure that solves a sequence of convex subproblems. We further develop a target localization estimator that fuses one direct time-of-arrival (ToA) measurement, one angle-of-arrival (AoA) measurement, and multiple RIS-assisted indirect ToA measurements. Under small measurement errors and asymptotically efficient first-stage ToA/AoA estimation, the estimator covariance approaches the Cramér--Rao bound (CRB) to first order. Numerical results validate the analytical scaling laws and demonstrate the localization gains enabled by cooperative RIS-equipped users.

0.13

ISAC Beamforming Design Based on a Matrix Nearness Formulation With Improved Efficiency

eess.SP ·2026-08-23 ·Berkan Kilic, Kenan Turbic, Slawomir Stanczak
published similarity 0.66
Abstract

We propose an integrated sensing and communication (ISAC) beamforming method that performs joint multiple-input multiple-output (MIMO) radar sensing and multi-user MIMO communication. Our approach builds on a matrix nearness formulation of the MIMO radar problem and utilizes our recently proposed efficient solver, where the computational complexity is dominated by an eigenvalue decomposition (EVD) evaluation at each iteration. We extend this formulation to an ISAC scenario by incorporating minimum signal-to-noise ratio constraints as communication design criteria, only requiring statistical channel state information knowledge at base station. Furthermore, we propose a method to avoid the burdensome EVD evaluations in certain iterations, reducing the computation time by up to six times in a massive MIMO setting.

0.53

Robust Beamforming Design for Integrated Sensing and Communications with Mutual Coupling Effect

eess.SP ·2026-08-16 ·Jieon Maeng, Kawon Han
published similarity 0.66
Abstract · 5 pages, 5 figures, submitted to IEEE Wireless Communication Letters, 2026

Integrated sensing and communications (ISAC) is a key technology for next-generation wireless networks, enabling communication and radar sensing over shared spectral and hardware resources. In practical multi-user multiple-input multiple-output (MU-MIMO) ISAC transmitters, however, mutual coupling (MC) between antenna elements distorts the array steering vector and each communication user (CU) channel, so that the sensing beampattern deviates from the desired one and the communication link to each user degrades. To address this limitation, we propose a robust MC-compensated beamforming design that guarantees both the sensing and communication performance of MU-MIMO ISAC transmitters against the residual MC error. We introduce a residual error on the MC matrix, so that a norm-bounded residual error induces both the sensing beampattern uncertainty and the communication channel uncertainty. The transmit covariance is then optimized against the worst-case of each uncertainty, minimizing the worst-case beampattern matching mean-squared error (MSE) for sensing while guaranteeing the signal-to-interference-plus-noise ratio (SINR) for each CU. Each worst-case constraint is converted into a linear matrix inequality, and the problem becomes a convex semidefinite program (SDP). Numerical results show that the proposed robust design attains both a lower sensing beampattern matching MSE and a higher communication SINR than those of the conventional designs, with an advantage that widens as the residual error grows.

0.58

Toward Reliable and Accurate Predictive ISAC in Mobile mmWave Networks

eess.SP ·2026-09-24 ·Atefeh Rezaei, Vahid Jamali, Falko Dressler
similarity 0.65
Abstract

Integrated sensing and communications (ISAC) systems offer a promising framework for beam tracking, which enhances channel awareness and improves communication reliability in mobile millimeter wave (mmWave) networks. Motivated by this, we propose a low-complexity, model-driven channel state information (CSI) framework with integrated channel prediction capability in ISAC-enabled systems. To reduce the overhead of CSI acquisition and uplink feedback, the proposed framework leverages predicted target sensing parameters to construct partial CSI from both line-of-sight (LoS) and detected non-line-of-sight (NLoS) components. Exploiting this partial CSI, we formulate a beamforming optimization problem that minimizes the worst targets' Cramér-Rao bound (CRB) under per-user communication constraints. This problem is non-convex and highly non-linear; therefore, we develop an efficient suboptimal solution using successive convex approximation (SCA) and Schur-complement-based decomposition techniques, and we evaluate its complexity in comparison with other approaches. Moreover, since obtaining the absolute phase of the channel paths may require additional pilot resources, we formulate a robust beamforming design that does not assume this knowledge, and propose a solution based on sample averaging. Numerical results demonstrate that the ISAC-based robust channel prediction and localization framework significantly improves prediction accuracy and link reliability compared with conventional schemes, such as communication-based localization and tracking and separated sensing and communication. These results highlight the potential of ISAC for reliable, adaptive, and high-frequency, blockage-prone wireless networks. Furthermore, the performance of the proposed framework is evaluated under severe blockage scenarios, which further demonstrates enhanced network reliability.

0.16

Performance Analysis and Sensing-Aware Resource Allocation for Full-Duplex Massive MIMO ISCC Networks

cs.IT ·2026-10-06 ·Vo Phi Son, Van-Dinh Nguyen, Nhan Thanh Nguyen, Tuan-Vu Truong, Symeon Shatzinotas
similarity 0.64
Abstract · 13 pages

Emerging edge applications must sense their environment and process data within tight latency budgets. Full-duplex (FD) integrated sensing, communication, and computing (ISCC) supports these functions concurrently, but radar probing interferes with uplink reception while user transmissions degrade target estimation. These coupled effects call for joint sensing and offloading decisions. We investigate a FD massive multiple-input multiple-output (mMIMO) ISCC network in which users partially offload tasks to an edge server while an access point probes a target. For zero-forcing uplink reception with imperfect channel estimates, we derive a tractable rate bound and target-angle Cramer-Rao lower bounds (CRLBs) under the stated interference and beam-alignment assumptions. We then jointly optimize offloading fractions, user and radar transmit powers, and edge computing resources to minimize average end-to-end task latency subject to sensing-accuracy, communication-rate, energy, deadline, and resource constraints. A successive convex approximation algorithm is developed to efficiently address the resulting nonconvex problem. The analysis shows that larger arrays improve sensing and uplink performance, but residual radar interference creates a finite rate ceiling when user powers scale down with array size. Simulation results show joint allocation reduces radar transmit power by approximately 86% relative to equal communication-user power at a -40 dB CRLB threshold and lowers latency compared with fixed-allocation and half-duplex schemes.

0.11

ISAC with Co-Prime Arrays: Virtual-Aperture Sensing and uplink downlink communications

cs.IT ·2026-09-02 ·Jing Zhang, Yuxiao Liu, Jiayi Sun, Junliang Ye, Derrick Wing Kwan Ng
benchmark similarity 0.62
Abstract

Integrated sensing and communication (ISAC) enables simultaneous communication and environmental sensing in unmanned aerial vehicle (UAV) networks, but its performance is constrained by the physical antenna aperture and residual self-interference (SI) in full-duplex (FD) sensing. To address these issues, we propose a shared-aperture ISAC architecture in which a sparse co-prime array (CPA) is embedded in a uniform linear array (ULA) grid for FD sensing, while the remaining antenna positions support time-division duplexing (TDD) communication. We characterize the sensing performance through an order-wise Cramer-Rao bound (CRB) analysis, showing that the CPA achieves a stronger asymptotic sensing gain than the partitioned ULA benchmark in both single-target and nondegenerate multi-target scenarios. We further reveal a space-time sampling tradeoff under the same physical aperture. Based on the proposed architecture, we formulate a non-convex joint resource allocation problem that maximizes the weighted downlink-uplink sum rate by jointly designing the sensing transmit covariance, downlink precoder, and uplink receive beamformers under sensing accuracy, BS transmit-power, communication QoS, and residual SI constraints. An alternating-optimization-based algorithm is developed. Simulations demonstrate consistent performance gains over the considered baselines and confirm the complementary benefits of the CPA virtual aperture and sensing covariance optimization.

0.08

Joint Beamforming and Phase Shifts Design for RIS-Enabled RSMA-ISAC Systems

cs.IT ·2026-08-19 ·Xuejun Cheng, Qian Zhang, Yuhui Jiao, Yufei Zhao, Zheng Dong +1 more
published similarity 0.62
Abstract

This paper investigates the sensing-centric design of reconfigurable intelligent surface (RIS)-enabled rate-splitting multiple access-integrated sensing and communication (RSMA-ISAC) systems. Specifically, we propose a new beam-gain approximation method to enhance the sensing beam gain while satisfying communication quality-of-service (QoS) constraints.Since the joint optimization of the beamforming vectors and RIS phase shifts is highly coupled and non-convex, existing methods typically rely on generic optimization solvers involving substantial computational complexity. To address this issue, we propose an efficient constraints-separation-based alternating optimization algorithm (CS-AO). Our proposed algorithm effectively decouples the optimization variables and yields closed-form solutions for all subproblems, thereby significantly reducing the computational burden. Simulation results show that the proposed algorithm achieves sensing beam-gain performance comparable to successive convex approximation (SCA) and semidefinite relaxation (SDR) benchmarks, while achieving more than 120-fold and 50-fold runtime reductions. In addition, compared with conventional space-division multiple access (SDMA) schemes, the proposed design exhibits substantial sensing beam gain.

0.56