CS Paper Radar

Joint Beamforming and Phase Shifts Design for RIS-Enabled RSMA-ISAC Systems

Xuejun Cheng, Qian Zhang, Yuhui Jiao, Yufei Zhao, Zheng Dong, Ju Liu

cs.IT ·submitted 2026-08-19 02:30 UTC · v1
published

Abstract

This paper investigates the sensing-centric design of reconfigurable intelligent surface (RIS)-enabled rate-splitting multiple access-integrated sensing and communication (RSMA-ISAC) systems. Specifically, we propose a new beam-gain approximation method to enhance the sensing beam gain while satisfying communication quality-of-service (QoS) constraints.Since the joint optimization of the beamforming vectors and RIS phase shifts is highly coupled and non-convex, existing methods typically rely on generic optimization solvers involving substantial computational complexity. To address this issue, we propose an efficient constraints-separation-based alternating optimization algorithm (CS-AO). Our proposed algorithm effectively decouples the optimization variables and yields closed-form solutions for all subproblems, thereby significantly reducing the computational burden. Simulation results show that the proposed algorithm achieves sensing beam-gain performance comparable to successive convex approximation (SCA) and semidefinite relaxation (SDR) benchmarks, while achieving more than 120-fold and 50-fold runtime reductions. In addition, compared with conventional space-division multiple access (SDMA) schemes, the proposed design exhibits substantial sensing beam gain.

Journal ref
IEEE Wireless Communications Letters, 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Beamforming and Filter Design for Bistatic ISAC under Known and Unknown Transmit Symbols

eess.SP ·2026-08-17 ·Mohammad Hatami, Nhan Thanh Nguyen, Markku Juntti
publishedbenchmark similarity 0.67
Abstract · 5 pages, 3 figures. Accepted for presentation at the IEEE SPAWC 2026 conference

This paper investigates the joint design of beamforming and radar receive filters in a multiuser bistatic integrated sensing and communications (ISAC) system, aiming to maximize the minimum radar signal-to-interference-plus-noise ratio (SINR) under communications SINR and transmit power constraints. We consider two scenarios: transmitted signals are either known or unknown at the radar receiver. We develop tractable solutions to the resulting non-convex optimization problems in both cases. For the known-signal case, we derive closed-form radar receive filters and iteratively design beamforming using fractional programming (FP) and successive convex approximation (SCA). For the unknown case, we adopt an alternating optimization (AO) approach to jointly design the beamforming and receive filters. Numerical results demonstrate that, while both approaches achieve comparable performance under per-slot optimization, knowledge of the transmitted symbols provides significant gains in multi-slot processing via coherent integration. Moreover, the proposed ISAC designs perform close to the radar-only benchmark under moderate communication requirements.

0.57

Cooperative Target Localization in RIS-Enabled ISAC Systems

eess.SP ·2026-09-30 ·Rouhollah Amiri, Abdollah Ajorloo, Mohammad Mahdi Mojahedian, Ahmad Reza Hassanshahi, Fabiola Colone
similarity 0.66
Abstract

This paper develops a cooperative integrated sensing and communication (ISAC) framework in which a multi-antenna base station (BS) simultaneously localizes a target and serves multiple communication users, a subset of which is equipped with reconfigurable intelligent surfaces (RISs). The Fisher information matrix (FIM) for target positioning is derived, explicitly characterizing its dependence on the BS beamforming coefficients, RIS phase profiles, and bistatic sensing geometry. Under the stated scaling assumptions, coherent RIS phase alignment yields a Fisher-information gain that scales quadratically with the number of RIS elements, whereas independent random phases provide a linear gain in expectation. We formulate a sensing-centric joint active and passive beamforming problem that minimizes the position error bound (PEB) subject to per-user signal-to-interference-plus-noise ratio (SINR) and transmit-power constraints. The resulting non-convex problem is addressed through an iterative successive convex approximation (SCA) procedure that solves a sequence of convex subproblems. We further develop a target localization estimator that fuses one direct time-of-arrival (ToA) measurement, one angle-of-arrival (AoA) measurement, and multiple RIS-assisted indirect ToA measurements. Under small measurement errors and asymptotically efficient first-stage ToA/AoA estimation, the estimator covariance approaches the Cramér--Rao bound (CRB) to first order. Numerical results validate the analytical scaling laws and demonstrate the localization gains enabled by cooperative RIS-equipped users.

0.13

Tri-Hybrid Beamforming Design for DMA-Aided Secure ISAC Systems

eess.SP ·2026-09-06 ·Siyi Li, Zhuoming Li, Mohammadali Mohammadi, Jiajun He, Hien Quoc Ngo +1 more
published similarity 0.66
Abstract · 6 pages, 4 figures, accepted by IEEE GLOBECOM 2026

This paper proposes a tri-hybrid beamforming scheme for secure integrated sensing and communication (ISAC) with a dynamic metasurface antenna (DMA) architecture, where the base station (BS) is capable of communicating with legitimate users and sensing the target. There is also an eavesdropper in the system intending to eavesdrop on the confidential information. The tri-hybrid beamforming design problem is formulated with the objective of maximizing the sensing signal-to-noise ratio (SNR) under the constraints of secrecy spectral efficiency (SSE), transmit power, and physical structure limitations. We first solve the problem and obtain the optimized fully-digital beamforming solution through successive convex approximation (SCA) and semidefinite relaxation (SDR) approaches. A triple alternating optimization scheme is then developed to iteratively optimize the digital, analog, and DMA beamformers, progressively approximating the fully-digital solution. Numerical results demonstrate that the proposed secure tri-hybrid beamforming design for DMA-aided ISAC improves the sensing SNR by approximately 3 dB compared to a tri-hybrid beamforming scheme with a fixed DMA electromagnetic design.

0.20

Discrete Antenna Positioning and Beamforming Design for RIS-Assisted MA Secure ISAC Systems

eess.SP ·2026-09-14 ·Zhendong Li, Mingze Zhu, Zhou Su, Lin Chen, Kang Wei +3 more
similarity 0.66
Abstract

This paper investigates a reconfigurable intelligent surface (RIS)-assisted movable antenna (MA) secure integrated sensing and communication (ISAC) system. In this architecture, the RIS establishes indirect transmission links to provide communication services for multiple legitimate users, while the high spatial diversity gain of MA is leveraged to enhance system security. Then, we formulate an optimization problem to maximize the system total secrecy rate by jointly optimizing the MA position selection, active beamforming design for base station and passive beamforming design for RIS. The problem also accounts for practical constraints including transmit power budget, sensing beampattern mean square error (MSE), RIS unit-modulus constraint. However, it is challenging to solve this problem due to its non-convexity and strong coupling of the optimization variables. Consequently, we propose an alternating optimization (AO) framework, employing techniques including discrete binary particle swarm optimization (BPSO), successive convex approximation (SCA) and difference-of-convex (DC) programming to transform the optimization problem into convex subproblems. Based on the solution above, the convex sub-problems are solved iteratively until convergence is achieved. Numerical results demonstrate that the proposed algorithm outperforms other baseline algorithms in terms of secure communication performance.

0.14

Learning-Assisted Beamforming Optimization for Hybrid XL-RIS-Aided Communication

cs.IT ·2026-11-07 ·Awuni Mohammed Abdul-Razak, Kyungchun Lee
similarity 0.66
Abstract · 13 pages, 8 figures

Hybrid active-passive extremely large-scale reconfigurable intelligent surface (XL-RIS) architectures mitigate the double-hop path loss of passive RIS while enabling near-field spatial energy focusing, but impose a computationally intensive mixed discrete-continuous beamforming design problem under strict radio-frequency (RF) power constraints. This paper investigates a hybrid XL-RIS-assisted downlink multi-user multiple-input single-output (MU-MISO) system in the near-field regime. The joint optimization of the base station (BS) precoder, discrete XL-RIS phase shifts, and active-element amplification gains is addressed via a discrete coordinate ascent (DCA)-based alternating optimization (AO) framework, in which discrete variables are updated through local index-domain searches and the BS precoder is derived in closed form via a noise-aware minimum mean-square error (MMSE) criterion. To reduce the per-sample computational cost for XL-RIS apertures, a deep unfolding (DU) framework is proposed as a low-complexity alternative, unrolling a fixed number of Riemannian gradient ascent steps on the sum-rate objective and recovering the discrete phase configuration via quantized phasor projection, with one learnable step size per layer trained in a self-supervised manner. Numerical results under near-field spherical-wave channel models confirm that the DU framework achieves sum-rate performance close to the AO scheme with substantially lower and nearly constant runtime, and that both schemes consistently outperform manifold optimization under discrete hardware constraints.

0.19

Joint Discrete Pinching-Antenna Activation and Beamforming Design for Efficient PASS-ISAC

eess.SP ·2026-10-02 ·Joshua Ogundiya, Animesh Yadav, Octavia Dobre
published similarity 0.65
Abstract · 6 pages, 5 figures, accepted for publication in the proceeding of the IEEE CCNC-2027

Pinching-antenna systems (PASS) offer flexible radiation points for integrated sensing and communication (ISAC), but existing designs largely assume continuous antenna placement, which may be impractical with pre-installed hardware. We investigate a discrete-activation multi-waveguide PASS-ISAC system that selects sparse transmit and receive pinching antennas (TPAs/RPAs) from predefined locations. We formulate a communication-rate maximization problem by jointly optimizing beamforming and TPA/RPA activation under transmit-power, activation, and sensing signal-to-noise ratio (SNR) constraints. To solve this nonconvex problem, we develop a low-complexity joint discrete pinching-antenna activation and beamforming optimization (JDPABO) algorithm based on alternating optimization, successive convex approximation, and reweighted $\ell_1$ minimization. Simulations show that JDPABO approaches continuous-placement performance at low sensing SNR requirements and outperforms fixed activation schemes with sparse PA activation.

0.25

Cramér-Rao Bound Optimization for Joint Beamforming and Mode Selection in RDARS-Assisted ISAC Systems

eess.SP ·2026-10-01 ·Ahmad Reza Hassanshahi, Rouhollah Amiri, Fereidoon Behnia
benchmark similarity 0.65
Abstract

Integrated Sensing and Communication (ISAC) is a foundation of 6G networks, demanding architectures that simultaneously enhance sensing accuracy and communication reliability. This paper presents a Reconfigurable Distributed Antenna and Reflecting Surface (RDARS) aided ISAC framework, where an RDARS overcomes the limitations of conventional passive Reconfigurable Intelligent Surfaces (RIS) and Distributed Antenna Systems (DAS). By enabling each element to dynamically operate in either \textit{reflection} or \textit{connection} mode, RDARS synergistically harnesses reflection gain, distribution gain, and an additional mode-selection gain. We investigate the joint optimization of transmit beamforming at the base station and dynamic mode selection at the RDARS to minimize the sensing performance metric, namely the Cramér-Rao Bound (CRB) for target localization, while guaranteeing a minimum required Signal-to-Interference-plus-Noise Ratio (SINR) for multiple communication users. To solve the resulting non-convex and mixed-integer problem, we develop an efficient iterative algorithm based on the Alternating Optimization (AO) framework, effectively leveraging Majorization-Minimization (MM) and Penalty methods. Comprehensive simulations validate the proposed design, demonstrating that the dynamic RDARS configuration achieves a superior trade-off between the Position Error Bound (PEB) and communication SINR, significantly outperforming benchmark passive RIS and DAS systems.

0.10

Sum Rate Maximization for Practical RIS-Enhanced Rate-Splitting Multiple Access Systems

cs.IT ·2026-10-10 ·Qian Zhang, Xuejun Cheng, Jiaming Shi, Yufei Zhao, Rugui Yao +1 more
publishedbenchmark similarity 0.65
Abstract

Reconfigurable intelligent surfaces (RIS) combined with rate-splitting multiple access (RSMA) provide a promising solution for improving the spectral efficiency (SE) of sixth-generation (6G) communication systems. However, most existing studies neglect the practical coupling between the RIS phase shift and amplitude, which may cause phase-shift mismatch and significant performance loss. In this paper, we investigate the multiuser sum-rate maximization problem for practical RIS-enhanced RSMA systems considering amplitude-phase coupling. To address the resulting non-convex problem, an effective variable separation algorithm is proposed. The proposed algorithm is compatible with RIS reflecting optimization under the continuous phase shift or any amplitude-phase coupling relationship and can also be directly extended to practical RIS-enhanced NOMA and OMA systems. Simulation results demonstrate performance gain of over 190\% compared with the ideal-RIS-based benchmark, while the proposed RSMA scheme significantly outperforms the corresponding NOMA and OMA schemes.

0.47