CS Paper Radar

Sum Rate Maximization for Practical RIS-Enhanced Rate-Splitting Multiple Access Systems

Qian Zhang, Xuejun Cheng, Jiaming Shi, Yufei Zhao, Rugui Yao, Ye Fan

cs.IT ·submitted 2026-10-10 09:42 UTC · v1
publishedbenchmark

Abstract

Reconfigurable intelligent surfaces (RIS) combined with rate-splitting multiple access (RSMA) provide a promising solution for improving the spectral efficiency (SE) of sixth-generation (6G) communication systems. However, most existing studies neglect the practical coupling between the RIS phase shift and amplitude, which may cause phase-shift mismatch and significant performance loss. In this paper, we investigate the multiuser sum-rate maximization problem for practical RIS-enhanced RSMA systems considering amplitude-phase coupling. To address the resulting non-convex problem, an effective variable separation algorithm is proposed. The proposed algorithm is compatible with RIS reflecting optimization under the continuous phase shift or any amplitude-phase coupling relationship and can also be directly extended to practical RIS-enhanced NOMA and OMA systems. Simulation results demonstrate performance gain of over 190\% compared with the ideal-RIS-based benchmark, while the proposed RSMA scheme significantly outperforms the corresponding NOMA and OMA schemes.

Journal ref
IEEE Internet of Things, 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Joint Beamforming and Phase Shifts Design for RIS-Enabled RSMA-ISAC Systems

cs.IT ·2026-08-19 ·Xuejun Cheng, Qian Zhang, Yuhui Jiao, Yufei Zhao, Zheng Dong +1 more
published similarity 0.65
Abstract

This paper investigates the sensing-centric design of reconfigurable intelligent surface (RIS)-enabled rate-splitting multiple access-integrated sensing and communication (RSMA-ISAC) systems. Specifically, we propose a new beam-gain approximation method to enhance the sensing beam gain while satisfying communication quality-of-service (QoS) constraints.Since the joint optimization of the beamforming vectors and RIS phase shifts is highly coupled and non-convex, existing methods typically rely on generic optimization solvers involving substantial computational complexity. To address this issue, we propose an efficient constraints-separation-based alternating optimization algorithm (CS-AO). Our proposed algorithm effectively decouples the optimization variables and yields closed-form solutions for all subproblems, thereby significantly reducing the computational burden. Simulation results show that the proposed algorithm achieves sensing beam-gain performance comparable to successive convex approximation (SCA) and semidefinite relaxation (SDR) benchmarks, while achieving more than 120-fold and 50-fold runtime reductions. In addition, compared with conventional space-division multiple access (SDMA) schemes, the proposed design exhibits substantial sensing beam gain.

0.56

Beamforming Design for RIS-Assisted Backscatter NOMA in Underlay Cognitive Radio

eess.SP ·2026-10-06 ·Kgomotjo Seipobi, Fambirai Takawira, Chabalala Chabalala
hot direction similarity 0.63
Abstract

This paper investigates a reconfigurable intelligent surface (RIS)-assisted backscatter non-orthogonal multiple access (NOMA) network operating as the secondary system of an underlay cognitive radio network. A multi-antenna base station serves several user clusters through the RIS, each containing a backscatter device (BD). We maximise the weighted sum rate of the secondary network by jointly optimising the transmit beamformers and the RIS reflection matrix, subject to the power budget, the interference-temperature limit and minimum rate requirements. The non-convex problem is solved by alternating optimisation, using semidefinite relaxation and sequential rank-one constraint relaxation. Interference-normalised user ordering makes the successive interference cancellation constraints redundant. A closed-form equal-rate power split is derived; it agrees closely with simulation and costs about 4.5% of the sum rate. Supporting the BDs reduces the NOMA sum rate by 8.7% relative to a no-BD design, while a larger BD reflection coefficient raises the backscatter rate with little NOMA loss.

0.29

Rate-Splitting Multiple Access for RIS-Enabled Full-Duplex Communications with User Relaying

cs.IT ·2026-10-13 ·Yuwen Cao, Hui Wang, Tomoaki Ohtsuki, Shahid Mumtaz
similarity 0.62
Abstract

Rate splitting multiple access (RSMA) has emerged as a promising non-orthogonal transmission mechanism to improve spectral- and energy efficiency, and user fairness in multi-antenna broadband channels. To further enhance its performance, in this paper we investigate a novel cooperative RSMA (C-RSMA) transmission framework assisted by reconfigurable intelligent surface (RIS) and user relaying. More specifically, we first formulate the common- and private-rate maximization problem satisfying the transmit power constraint, by jointly optimizing the transmit beamformers at the BS and the reflective beamformer at the RIS. The above formulated problem is an intractable and NP-hard problem as the optimization variables are coupled and the strong residual self-interference (SI) is involved. To conquer the challenge mentioned above, we propose a low-complexity alternative optimization approach to jointly optimize the transmit and reflective beamforming. Simulation results show that our approach is capable of enabling superior sum-rate performance than the RIS-assisted space division multiple access (SDMA), half-duplex RSMA, and SDMA without using RIS schemes.

0.10

A Bussgang-based Latent Lifting Method: Discrete RIS Channel Estimation and Beamforming

eess.SP ·2026-11-07 ·Mintaek Oh, Namyoon Lee, Jinseok Choi
similarity 0.57
Abstract · 13 pages, 8 figures

This paper addresses the challenge of discrete phase-shift optimization in reconfigurable intelligent surface (RIS)-aided multiuser communication systems. Practical RIS hardware often utilizes low-resolution phase shifters, leading to challenging combinatorial optimization problems. To address this challenge, we propose a Bussgang-based latent lifting (BuLL) method that represents discrete phase shifts as quantized outputs of continuous latent variables. Our BuLL method calibrates the Bussgang gain and distortion covariance under a reference distribution and keeps these moments fixed during deterministic latent optimization. These fixed moments are then used to construct a distortion-aware continuous surrogate that incorporates reference-averaged discretization effects without penalty terms. For uplink channel estimation, we develop a matrix quadratic transform-based algorithm to optimize a mean-square-error surrogate. For downlink beamforming, we develop a generalized power iteration-based RIS phase-shift optimization algorithm for a spectral efficiency (SE) surrogate. Numerical results demonstrate improvements in channel estimation accuracy and sum SE over conventional benchmarks in the evaluated low-resolution RIS settings.

0.34

Unlocking Downlink NOMA with FARIS: Joint Clustering and Surface Configuration Design

eess.SP ·2026-08-15 ·Hong-Bae Jeon, Tuo Wu
similarity 0.57
Abstract

This paper investigates a fluid active reconfigurable intelligent surface (FARIS)-aided downlink non-orthogonal multiple access (NOMA) system. We formulate a network sum-rate maximization problem that jointly optimizes user clustering, NOMA power allocation, FARIS amplification gains, discrete phase shifts, and fluid element selection under quality-of-service, reflected-power, and hardware constraints. To address the resulting nonconvex mixed-integer problem, we develop a two-stage framework comprising distance-based interleaved clustering for constructing successive-interference-cancellation (SIC)-friendly user groups and per-cluster alternating optimization. The resulting subproblems are handled using geometric programming (GP), fractional programming (FP), majorization-minimization (MM) with mixed-integer phase optimization, and the cross-entropy method (CEM). Numerical results demonstrate rapid convergence, near-optimal performance relative to brute-force search (BFS)-based optimum, and consistently outperforms the benchmarks. These results verify the effectiveness of jointly integrating FARIS and NOMA for high-rate downlink transmission.

0.04

On the Performance of RIS-Empowered Transmitters with Receive Combining Techniques

eess.SP ·2026-10-19 ·Muhammed Faruk Karabay, Oğuz Kucur, Ertugrul Basar
similarity 0.57
Abstract

Reconfigurable intelligent surface (RIS)-empowered transmitters offer a promising basis for hardware-efficient multi-antenna architectures in next-generation wireless networks. In particular, combining these transmitters with low-complexity reception techniques such as receive antenna selection (RAS) can further simplify the receiver architecture. In this paper, we investigate the impact of practical phase-shift constraint on RIS-empowered multi-antenna systems employing maximal ratio combining (MRC) and RAS. Since each RIS element can apply only a single phase-shift at a given time, the system performance degrades substantially when multiple receive antennas are active simultaneously. To quantify this effect, closed-form outage probability expressions are derived and asymptotic analyses are carried out over Rician fading channels. We show that the practical phase-shift constraint of RIS-based transmitters can degrade the diversity order of MRC and in addition, RAS outperforms MRC in the examined system models, contrary to the conventional performance ordering of these techniques.

0.15

Joint Beamforming for Continuous Transmissive RIS-Enabled Multiuser Communications

cs.IT ·2026-10-06 ·Beining Han, Shumeng Zhang, Deyou Zhang, Qingchao Li, Jun Liu +1 more
similarity 0.57
Abstract

This paper studies continuous transmissive reconfigurable intelligent surface (CT-RIS)-enabled multiuser downlink communications, where passive beamforming is characterized by a phase function defined over the continuous aperture. We employ a distance-dependent spherical-wave model for the base station (BS)-to-CT-RIS link and introduce a finite-path model based on field-response vectors for the CT-RIS-to-user links. The resulting weighted sum rate maximization problem jointly optimizes the finite-dimensional BS precoders and the infinite-dimensional CT-RIS phase function, giving rise to a mixed finite- and infinite-dimensional non-convex optimization problem. To address this problem, we develop an alternating optimization algorithm that combines a closed-form BS precoder update with a functional phase update derived using the calculus of variations and minorization-maximization. Numerical results demonstrate that the proposed CT-RIS consistently outperforms the considered benchmarks, with the performance gains attributed to spatially continuous phase control and a larger effective receiving area.

0.24

Optimization of Joint Beamforming in RIS-aided Multi-carrier and Multi-user MIMO Systems

cs.NI ·2026-11-04 ·Nuwan Balasuriya, Atefeh Termehchi, Ekram Hossain
similarity 0.56
Abstract

Reconfigurable intelligent surface (RIS)-aided multiple-input multiple-output (MIMO) communication is a promising enabler for beyond-fifth-generation wireless networks. However, RIS phase shifters typically rely on a tuning element (for example a variable-length stub), which can be optimally configured for only one carrier frequency at a time. This constraint complicates RIS deployment in multi-carrier systems and often necessitates additional measures, such as using multiple RIS panels or partitioning RIS elements across carriers. In this work, we propose a novel scheme in which all RIS elements simultaneously serve multiple carriers, delivering improved performance over existing approaches. Our method leverages the multiple reflections captured by physically consistent RIS models to realize the desired phase shifts for all carriers using a single stub length setting. We further develop a joint active and passive beamforming optimization framework tailored to multi-carrier, physically consistent RIS-aided systems. Simulation results confirm the effectiveness of the proposed

0.23