CS Paper Radar

On the Performance of RIS-Empowered Transmitters with Receive Combining Techniques

Muhammed Faruk Karabay, Oğuz Kucur, Ertugrul Basar

eess.SP ·submitted 2026-10-19 13:11 UTC · v2

Abstract

Reconfigurable intelligent surface (RIS)-empowered transmitters offer a promising basis for hardware-efficient multi-antenna architectures in next-generation wireless networks. In particular, combining these transmitters with low-complexity reception techniques such as receive antenna selection (RAS) can further simplify the receiver architecture. In this paper, we investigate the impact of practical phase-shift constraint on RIS-empowered multi-antenna systems employing maximal ratio combining (MRC) and RAS. Since each RIS element can apply only a single phase-shift at a given time, the system performance degrades substantially when multiple receive antennas are active simultaneously. To quantify this effect, closed-form outage probability expressions are derived and asymptotic analyses are carried out over Rician fading channels. We show that the practical phase-shift constraint of RIS-based transmitters can degrade the diversity order of MRC and in addition, RAS outperforms MRC in the examined system models, contrary to the conventional performance ordering of these techniques.

Closest papers

Nearest neighbours by meaning across the whole index.

Polarization-Aware Rotatable Antennas for RIS-Empowered Symbiotic Radios

eess.SP ·2026-09-03 ·Chao Zhang, Ruizhe Long, Boon-Hee Soong, Ying-Chang Liang
benchmark similarity 0.65
Abstract

This paper investigates a dual-polarized reconfigurable intelligent surface (DP-RIS)-empowered symbiotic radio (SR) system with rotatable antennas (RAs). By reconfiguring antenna orientations, RAs can steer their radiation patterns toward desired directions, thereby effectively mitigating the double-fading effect in RIS-assisted cascaded links. However, antenna rotation not only changes the radiation direction but also alters the local polarization bases, which may result in polarization mismatch and degrade the achievable gain. This motivates a joint spatial-polarization design that simultaneously exploits directional radiation gain and polarization matching. Specifically, we formulate a transmit power minimization problem that jointly optimizes digital beamforming, RA rotations, transceiver polarization states, and DP-RIS phase shifts, subject to the primary and secondary rate requirements as well as interference temperature constraints for non-SR users. To solve this non-convex problem, we develop an alternating optimization algorithm that integrates semidefinite programming, difference-of-convex programming, and Riemannian conjugate gradient methods. Moreover, to reduce hardware and computational complexity for practical deployment, we propose two low-complexity RA designs, namely a subarray-wise shared rotation design and a discrete rotation codebook design. Simulation results show that the proposed polarization-aware RA design significantly reduces the required transmit power compared with fixed-orientation and polarization-unaware benchmark schemes. Moreover, both the proposed low-complexity RA designs achieve comparable performance with reduced rotation complexity.

0.45

QoS-Aware Joint 1-Bit RIS Element Activation and Fluid-Antenna Port Selection

eess.SP ·2026-10-19 ·Khalid Yahya, Mahmoud Aldababsa
similarity 0.62
Abstract · 5 pages and 5 figures

This letter jointly optimizes fluid-antenna port selection, fixed-cardinality reconfigurable intelligent surface (RIS) element activation, and 1-bit reflection phases through an exact angular event sweep that extends full-activation divide-and-sort geometry to subset selection. We establish deterministic gain bounds and activation monotonicity, derive exact single-element outage expressions and high signal-to-noise ratio (SNR) asymptotics for independent RIS branches with correlated receiving ports, and prove diversity order equal to the RIS element count for fixed positive-definite RIS covariance. With perfect instantaneous channel state information, a quality-of-service aware policy activates the minimum number of elements required to meet a target SNR while preserving full-activation outage probability. An explicit overhead condition identifies when reduced activation improves net energy efficiency. Correlated-channel benchmarks illustrate subset-selection gains, aperture effects, and overhead-dependent energy-efficiency tradeoffs.

0.31

Fundamental Outage and Diversity Limits of Fluid Antenna Multiple Access Under Correlated Nakagami-$m$ Fading

cs.IT ·2026-11-09 ·Anastasios Papazafeiropoulos
top venue similarity 0.60
Abstract · 16 pages, 9 figures, accepted in IEEE TWC

Existing analytical studies of fluid antenna multiple access (FAMA) are largely confined to Rayleigh fading, independent-port assumptions, or asymptotic selection metrics, leaving the fundamental outage behavior under realistic fading and spatial correlation conditions uncharacterized. This paper fills this gap by presenting the first exact and asymptotically tight outage analysis of interference-limited FAMA systems under spatially correlated Nakagami-$m$ fading. By explicitly modeling the joint statistics of the desired and interference powers across fluid-antenna ports, \textcolor{black}{we first formulate the outage probability in terms of the joint desired-signal and interference distributions and then derive an explicit integral expression under a tractable single-reference-port spatial correlation model.} Building on this result, we establish a rigorous diversity-order characterization revealing that the achievable diversity is jointly dictated by the fading severity and the spatial correlation rank imposed by the finite antenna aperture, rather than by the nominal number of ports. To enable accurate and tractable performance evaluation beyond the asymptotic regime, we further introduce a Gamma-matched outage approximation that preserves both the exact diversity order and the array-gain constant. The resulting closed-form expression provides an accurate characterization over a wide range of signal-to-interference ratio (SIR) thresholds and offers clear physical insight into the role of spatial correlation in FAMA systems. Extensive Monte Carlo (MC) simulations confirm the tightness of the exact analysis, the sharpness of the asymptotic results, and the accuracy of the proposed approximation.

0.36

Tri-Hybrid Beamforming for T-RIS-Enabled Base Station

cs.IT ·2026-08-20 ·Hongtao Zhang, Chenlong Ding
similarity 0.60
Abstract

Transmissive reconfigurable intelligent surfaces (T-RISs) integrated into the transmitter provide a viable realization of tri-hybrid multiple-input multiple-output (MIMO), where spatial processing is distributed across the digital, analog radio-frequency (RF), and electromagnetic (EM) domains. However, unlike conventional RIS-assisted links, a transmitter-native T-RIS directly participates in radiation formation, making T-RIS front-end modeling and weighted sum-rate (WSR)-oriented joint precoding challenging under practical hardware constraints. This paper develops a unified modeling and precoding framework for transmitter-native T-RIS tri-hybrid multi-user (MU) downlink transmission. Specifically, starting from a continuous-field description, the received field is characterized by the interaction among the feed array, the programmable T-RIS aperture, and the user-side propagation, leading to a cascaded baseband input-output model for MU precoding. Furthermore, the same representation is instantiated in the Fresnel, Fraunhofer, and mixed-field regimes, so that near-field focusing and far-field angular steering can be handled within one front-end model. Additionally, a WSR maximization problem is formulated over the digital precoder, analog network, and T-RIS coefficients under power and quantization constraints. A two-level solver is then developed by coupling outer weighted minimum mean-square error (WMMSE) updates with WMMSE-induced aperture-field shaping and hardware projection. Simulations validate the modeling accuracy and convergence, and show that the proposed full tri-hybrid design improves WSR over baselines while suppressing mixed-field cross-regime leakage.

0.17

Cramér-Rao Bound Optimization for Joint Beamforming and Mode Selection in RDARS-Assisted ISAC Systems

eess.SP ·2026-10-01 ·Ahmad Reza Hassanshahi, Rouhollah Amiri, Fereidoon Behnia
benchmark similarity 0.59
Abstract

Integrated Sensing and Communication (ISAC) is a foundation of 6G networks, demanding architectures that simultaneously enhance sensing accuracy and communication reliability. This paper presents a Reconfigurable Distributed Antenna and Reflecting Surface (RDARS) aided ISAC framework, where an RDARS overcomes the limitations of conventional passive Reconfigurable Intelligent Surfaces (RIS) and Distributed Antenna Systems (DAS). By enabling each element to dynamically operate in either \textit{reflection} or \textit{connection} mode, RDARS synergistically harnesses reflection gain, distribution gain, and an additional mode-selection gain. We investigate the joint optimization of transmit beamforming at the base station and dynamic mode selection at the RDARS to minimize the sensing performance metric, namely the Cramér-Rao Bound (CRB) for target localization, while guaranteeing a minimum required Signal-to-Interference-plus-Noise Ratio (SINR) for multiple communication users. To solve the resulting non-convex and mixed-integer problem, we develop an efficient iterative algorithm based on the Alternating Optimization (AO) framework, effectively leveraging Majorization-Minimization (MM) and Penalty methods. Comprehensive simulations validate the proposed design, demonstrating that the dynamic RDARS configuration achieves a superior trade-off between the Position Error Bound (PEB) and communication SINR, significantly outperforming benchmark passive RIS and DAS systems.

0.10

Optimization of Joint Beamforming in RIS-aided Multi-carrier and Multi-user MIMO Systems

cs.NI ·2026-11-04 ·Nuwan Balasuriya, Atefeh Termehchi, Ekram Hossain
similarity 0.59
Abstract

Reconfigurable intelligent surface (RIS)-aided multiple-input multiple-output (MIMO) communication is a promising enabler for beyond-fifth-generation wireless networks. However, RIS phase shifters typically rely on a tuning element (for example a variable-length stub), which can be optimally configured for only one carrier frequency at a time. This constraint complicates RIS deployment in multi-carrier systems and often necessitates additional measures, such as using multiple RIS panels or partitioning RIS elements across carriers. In this work, we propose a novel scheme in which all RIS elements simultaneously serve multiple carriers, delivering improved performance over existing approaches. Our method leverages the multiple reflections captured by physically consistent RIS models to realize the desired phase shifts for all carriers using a single stub length setting. We further develop a joint active and passive beamforming optimization framework tailored to multi-carrier, physically consistent RIS-aided systems. Simulation results confirm the effectiveness of the proposed

0.23

Joint Beamforming for Continuous Transmissive RIS-Enabled Multiuser Communications

cs.IT ·2026-10-06 ·Beining Han, Shumeng Zhang, Deyou Zhang, Qingchao Li, Jun Liu +1 more
similarity 0.58
Abstract

This paper studies continuous transmissive reconfigurable intelligent surface (CT-RIS)-enabled multiuser downlink communications, where passive beamforming is characterized by a phase function defined over the continuous aperture. We employ a distance-dependent spherical-wave model for the base station (BS)-to-CT-RIS link and introduce a finite-path model based on field-response vectors for the CT-RIS-to-user links. The resulting weighted sum rate maximization problem jointly optimizes the finite-dimensional BS precoders and the infinite-dimensional CT-RIS phase function, giving rise to a mixed finite- and infinite-dimensional non-convex optimization problem. To address this problem, we develop an alternating optimization algorithm that combines a closed-form BS precoder update with a functional phase update derived using the calculus of variations and minorization-maximization. Numerical results demonstrate that the proposed CT-RIS consistently outperforms the considered benchmarks, with the performance gains attributed to spatially continuous phase control and a larger effective receiving area.

0.24

Performance Analysis of HAPS-Assisted Downlink RSMA under Orthogonal and Full Frequency Reuse

eess.SP ·2026-09-15 ·Farjam Karim, Prathapasinghe Dharmawansa, Nurul Huda Mahmood, Matti Latva-aho
similarity 0.58
Abstract

This paper analyzes the outage performance of a high-altitude platform station (HAPS)-assisted downlink employing rate-splitting multiple access (RSMA). A realistic link budget accounting for free-space path loss, rain attenuation, and atmospheric absorption is combined with elevation-angle-dependent shadowed Rician fading. Closed-form outage probability and throughput expressions are derived for orthogonal frequency allocation and full frequency reuse, where the aggregate inter-beam interference is approximated by a moment-matched Gamma random variable, yielding a tractable finite-sum expression via its Laplace transform. The analytical expressions are validated through Monte Carlo simulations, showing close agreement. Numerical results show that the optimal common stream power allocation depends on the transmit power, while inter-beam interference under frequency reuse introduces an outage floor absent under orthogonal allocation, providing practical design insights for HAPS-RSMA systems

0.22