CS Paper Radar

QoS-Aware Joint 1-Bit RIS Element Activation and Fluid-Antenna Port Selection

Khalid Yahya, Mahmoud Aldababsa

eess.SP ·submitted 2026-10-19 21:07 UTC · v1

Abstract

This letter jointly optimizes fluid-antenna port selection, fixed-cardinality reconfigurable intelligent surface (RIS) element activation, and 1-bit reflection phases through an exact angular event sweep that extends full-activation divide-and-sort geometry to subset selection. We establish deterministic gain bounds and activation monotonicity, derive exact single-element outage expressions and high signal-to-noise ratio (SNR) asymptotics for independent RIS branches with correlated receiving ports, and prove diversity order equal to the RIS element count for fixed positive-definite RIS covariance. With perfect instantaneous channel state information, a quality-of-service aware policy activates the minimum number of elements required to meet a target SNR while preserving full-activation outage probability. An explicit overhead condition identifies when reduced activation improves net energy efficiency. Correlated-channel benchmarks illustrate subset-selection gains, aperture effects, and overhead-dependent energy-efficiency tradeoffs.

Comment
5 pages and 5 figures

Closest papers

Nearest neighbours by meaning across the whole index.

On the Performance of RIS-Empowered Transmitters with Receive Combining Techniques

eess.SP ·2026-10-19 ·Muhammed Faruk Karabay, Oğuz Kucur, Ertugrul Basar
similarity 0.62
Abstract

Reconfigurable intelligent surface (RIS)-empowered transmitters offer a promising basis for hardware-efficient multi-antenna architectures in next-generation wireless networks. In particular, combining these transmitters with low-complexity reception techniques such as receive antenna selection (RAS) can further simplify the receiver architecture. In this paper, we investigate the impact of practical phase-shift constraint on RIS-empowered multi-antenna systems employing maximal ratio combining (MRC) and RAS. Since each RIS element can apply only a single phase-shift at a given time, the system performance degrades substantially when multiple receive antennas are active simultaneously. To quantify this effect, closed-form outage probability expressions are derived and asymptotic analyses are carried out over Rician fading channels. We show that the practical phase-shift constraint of RIS-based transmitters can degrade the diversity order of MRC and in addition, RAS outperforms MRC in the examined system models, contrary to the conventional performance ordering of these techniques.

0.15

Impedance-Aware Zonal Port Activation for Fluid Antenna Arrays

cs.IT ·2026-08-13 ·Yuanhui Wu, Hao Jiang, Zaichen Zhang
similarity 0.59
Abstract

Fluid antenna array (FAA) activation jointly determines the effective multi-user channel for precoding and the sparse physical aperture. Channel-oriented selection can concentrate high-gain ports and erode aperture quality, whereas geometry-oriented selection does not adapt to instantaneous channel state information (CSI). This paper formulates finite-port FAA activation as a rate--aperture--feasibility problem under an exact RF-chain budget. We propose impedance-aware zonal port activation (IA-ZPA), which couples compact CSI-conditioned port scoring with a checkerboard feasibility projection and inference-time mutual-impedance-aware selection. The learned scorer ranks ports, while the deterministic rule fixes the active aperture; a separate current-domain RZF backend then evaluates source-drive feasibility. Under a common induced-EMF protocol, IA-ZPA attains the largest constrained rate among the methods satisfying the prescribed mean-PSLL target with a substantially lower decision time than greedy selection.

0.32

Joint Antenna Positioning and Pilot Power Allocation for Uplink Fluid Antenna-Aided Cell-Free Massive MIMO Systems

eess.SY ·2026-10-27 ·Manobendu Sarker, Soumaya Cherkaoui
similarity 0.57
Abstract

This paper investigates joint fluid antenna (FA) position optimization and pilot power allocation for uplink cell-free massive MIMO networks supporting ultra-reliable low-latency communication (URLLC) traffic under pilot contamination. By continuously adjusting FA elements within a prescribed aperture, we adapt the spatial correlation structure to the varying propagation environment. We formulate a joint problem to minimize the average normalized mean-squared error (NMSE) subject to QoS constraints governed by finite blocklength and Markov-modulated Poisson process queueing analyses. To ensure tractability, we establish an analytical quadratic relationship between the NMSE and the effective signal-to-interference-plus-noise ratio through eigenstructure alignment factors. This mapping translates complex latency requirements into explicit NMSE thresholds, maintaining a median absolute approximation error below 0.03 dB and less than 10% relative error for over 90% of practical-regime samples. Given the nonconvex nature of the formulation, we propose an alternating optimization framework. Antenna positions are iteratively updated via successive convex approximation using analytical gradients and closed-form Euclidean projections. Pilot powers are allocated through a block coordinate descent scheme that employs safeguarded Newton steps to guarantee monotonic convergence. Furthermore, we introduce an auto-calibrated regularization variant to navigate the Pareto frontier between estimation accuracy and energy consumption. Numerical results show the proposed positioning yields up to 22% NMSE improvement over fixed uniform arrays while operating 7-8x faster than particle swarm optimization. The power allocation achieves within 0.5% of the global optimum at over two orders of magnitude lower computational cost, providing up to 39% pilot energy reduction with negligible estimation penalty.

0.26

GPU-Accelerated Robust MA--RIS Pre-Optimization for Communication and Target Illumination

cs.IT cs.LG ·2026-10-15 ·Tran Le Dung, Ho Viet Duc Luong
published similarity 0.57
Abstract

Movable antennas (MAs) and reconfigurable intelligent surfaces (RISs) offer strong spatial control for integrated sensing and communication (ISAC), but repeatedly adapting MA positions and RIS phases to each channel realization can be impractical. This letter develops a GPU-accelerated robust pre-optimization framework that jointly selects slow-timescale MA geometry and RIS phases and returns a reusable Pareto set balancing expected worst-user rate and transmit-side worst-target illumination. The illumination objective measures directional transmitted power rather than complete echo-detection or parameter-estimation performance. The proposed Regime-Aware Multiobjective Pre-optimization (RAMP) preserves regime-specific Pareto populations, regulates cross-regime mating using Pareto-survival feedback, and constructs a worst-regime robust archive. Numerical results demonstrate competitive robust Pareto quality against the considered evolutionary baselines while avoiding online physical re-optimization.

0.58

Certified Outage Dimensioning of Fluid Antenna Receivers: Required SNR, Aperture, and Port Count

eess.SP cs.IT ·2026-10-09 ·Yuanjun Shen
similarity 0.56
Abstract

We study the SNR, aperture, and port count needed to meet a target outage in a single-user downlink with a fixed transmit antenna and a single-RF fluid antenna receiver. For known spatially correlated Rayleigh channels and ideal port selection, a sampling-free residual certificate controls reduced-rank outage error over a continuous SNR interval. Positive Bessel features support large arrays, and bounded importance sampling converts the certificate into simultaneous design intervals. At 1 bit/s/Hz and outage $10^{-5}$, a four-wavelength, ten-port receiver requires 4.40--4.55 dB. Reducing its port count from 256 to ten costs 0.70--1.25 dB under a joint 95\% probability statement. At 3.5 wavelengths, ten ports require 4.90--5.05 dB. Integer-port screening across 3--8 dB shows how aperture and port requirements change with available SNR; an effective-SNR transformation extends these decisions to other rates. The reported intervals include model and sampling uncertainty under checked Gaussian covariance inputs. A constructive slow-growth rank bound and a 16--1024-port study support compact evaluation as port count grows.

0.45

Active Inference for Joint Port Selection and Pilot Allocation in Fluid Antenna Systems Under Partial CSI

eess.SP ·2026-09-02 ·Kian Fotovat, Kamran Fotovat, Zijun Wang
similarity 0.56
Abstract · 6 pages, 3 figures, 1 table

Fluid antenna systems (FAS) obtain spatial degrees of freedom by activating a few radiating ports from a dense grid of candidates, but deciding which ports to activate presupposes channel knowledge at ports that are never measured. Prior port-selection work assumes full or near-full channel state information (CSI) and treats the pilot overhead as a fixed cost. We instead formulate port selection and pilot allocation jointly as active inference. A spatio-temporal generative model -- sub-wavelength spatial correlation together with an order-p autoregressive temporal prior -- maintains a Gaussian belief over all N port channels, and the transmitter chooses both the ports it serves and the subset of them it pilots by minimizing an expected free energy that trades achievable rate against information gain and port-switching cost. Selection is greedy and submodular, at O(NM) per slot. On a 441-port grid with a hybrid front end at n_RF = 2K, the agent attains 91% of a full-CSI genie's sum rate while measuring only 2.3% of the candidate ports; pilots can then be withdrawn from ports that are still served, one fifth of them for 2% of the sum rate and two fifths for 8%. No training is required.

0.27

Robust Joint Beamforming and Configuration Design in FARIS-Aided Systems

eess.SP ·2026-08-28 ·Hong-Bae Jeon, Yonghwi Kim, Hyung-Joo Moon, Kai-Kit Wong
similarity 0.56
Abstract

In this paper, we propose a robust transmission design for multi-user systems assisted by a fluid active reconfigurable intelligent surface (FARIS), which enables both active reflection and dynamic port selection and thereby offers enhanced flexibility, under imperfect channel state information (CSI). We formulate a robust minimum sum-rate maximization problem by jointly optimizing the base station beamformer, the utilized FARIS coefficients, and the active element selection, while explicitly accounting for CSI errors and practical power constraints. The resulting problem is inherently nonconvex due to the coupled optimization variables and discrete port-selection structure. To tackle this challenge, we first reformulate the original problem via a weighted minimum mean square error (WMMSE) approach and then devise an alternating optimization (AO) framework, where each resulting subproblem admits efficient solutions and the overall algorithm converges to a stationary point. Simulation results demonstrate that the proposed robust FARIS scheme consistently outperforms conventional designs, highlighting the effectiveness of jointly leveraging degree-of-freedom (DoF) enhancement and active signal amplification under CSI uncertainty.

0.09

Exploiting Mutual Coupling Structure for Channel Estimation of Active RIS-Assisted Links

cs.IT eess.SP ·2026-09-17 ·Simon Tarboush, Pinjun Zheng, Hadi Sarieddeen, Tareq Y. Al-Naffouri, Giuseppe Caire
similarity 0.56
Abstract

Accurate channel modeling and estimation of active reconfigurable intelligent surface (RIS)-assisted links with densely integrated elements are essential to fully unleashing this technology's potential. This work adopts a physically consistent model incorporating mutual coupling (MC) effects, modeled via scattering parameters, in RIS-aided communication. We formulate the MC-aware channel estimation as a compressed sensing (CS) problem. The MC effect leads to an increase in the sensing matrix dimensions. This increased dimensionality substantially elevates the complexity of the formulated CS problem. To overcome this, we propose a low-complexity estimator that leverages the structure of the scattering matrix and MC mechanisms to obtain a reduced-size design sensing matrix. Numerical results demonstrate that our approach outperforms MC-unaware estimators by several dBs, achieving accuracy comparable to fully MC-aware solutions but with significantly lower complexity.

0.34