CS Paper Radar

Robust Joint Beamforming and Configuration Design in FARIS-Aided Systems

Hong-Bae Jeon, Yonghwi Kim, Hyung-Joo Moon, Kai-Kit Wong

eess.SP ·submitted 2026-08-28 02:06 UTC · v1

Abstract

In this paper, we propose a robust transmission design for multi-user systems assisted by a fluid active reconfigurable intelligent surface (FARIS), which enables both active reflection and dynamic port selection and thereby offers enhanced flexibility, under imperfect channel state information (CSI). We formulate a robust minimum sum-rate maximization problem by jointly optimizing the base station beamformer, the utilized FARIS coefficients, and the active element selection, while explicitly accounting for CSI errors and practical power constraints. The resulting problem is inherently nonconvex due to the coupled optimization variables and discrete port-selection structure. To tackle this challenge, we first reformulate the original problem via a weighted minimum mean square error (WMMSE) approach and then devise an alternating optimization (AO) framework, where each resulting subproblem admits efficient solutions and the overall algorithm converges to a stationary point. Simulation results demonstrate that the proposed robust FARIS scheme consistently outperforms conventional designs, highlighting the effectiveness of jointly leveraging degree-of-freedom (DoF) enhancement and active signal amplification under CSI uncertainty.

Closest papers

Nearest neighbours by meaning across the whole index.

Enabling Secure Wireless Communications for FARIS-Aided Systems

eess.SP ·2026-08-28 ·Hong-Bae Jeon, Yonghwi Kim, Hyung-Joo Moon, Kai-Kit Wong
similarity 0.70
Abstract

This paper investigates secure downlink transmission assisted by a fluid active reconfigurable intelligent surface (FARIS), which enables both active reflection and dynamic port selection, offering enhanced flexibility for physical-layer security. We formulate a secrecy rate maximization problem that jointly optimizes the transmit beamformer, active reflection coefficients, and fluid port configuration under practical power constraints. To efficiently handle the resulting highly nonconvex problem, we develop a tailored alternating optimization (AO) framework that decomposes the original joint design into tractable subproblems, where each admits an efficient solution while preserving the system constraints, enabling an effective joint optimization of beamforming and FARIS reconfiguration. Numerical results demonstrate that the proposed FARIS-assisted design consistently outperforms the benchmarks. The results further highlight the robustness of FARIS against unfavorable eavesdropping geometries, confirming its potential as a powerful enabler for secure communications in challenging environments.

0.21

Joint Beamforming for Continuous Transmissive RIS-Enabled Multiuser Communications

cs.IT ·2026-10-06 ·Beining Han, Shumeng Zhang, Deyou Zhang, Qingchao Li, Jun Liu +1 more
similarity 0.67
Abstract

This paper studies continuous transmissive reconfigurable intelligent surface (CT-RIS)-enabled multiuser downlink communications, where passive beamforming is characterized by a phase function defined over the continuous aperture. We employ a distance-dependent spherical-wave model for the base station (BS)-to-CT-RIS link and introduce a finite-path model based on field-response vectors for the CT-RIS-to-user links. The resulting weighted sum rate maximization problem jointly optimizes the finite-dimensional BS precoders and the infinite-dimensional CT-RIS phase function, giving rise to a mixed finite- and infinite-dimensional non-convex optimization problem. To address this problem, we develop an alternating optimization algorithm that combines a closed-form BS precoder update with a functional phase update derived using the calculus of variations and minorization-maximization. Numerical results demonstrate that the proposed CT-RIS consistently outperforms the considered benchmarks, with the performance gains attributed to spatially continuous phase control and a larger effective receiving area.

0.24

Exploiting Movable-Element STARS for Rate Splitting Multiple Access

eess.SP ·2026-08-17 ·Muhammad Asif, Asim Ihsan, Irfan Muhammad, Mohd Hamza Naim Shaikh, Muhammad Ayzed Mirza +2 more
benchmark similarity 0.67
Abstract · 13 pages, 10 figures

This paper investigates a movable-element simultaneously transmitting and reflecting reconfigurable intelligent surface (ME-STARS) assisted rate-splitting multiple access (RSMA) system under imperfect channel state information (CSI). Unlike conventional STARS with fixed element positions, the elements of ME-STARS can be repositioned within a predefined region, providing additional spatial degrees of freedom for improving the cascaded transmitter--STARS--user channels. To exploit this flexibility while accounting for CSI uncertainty, we formulate a robust sum-rate maximization problem that jointly optimizes the transmit beamforming, common-rate allocation, reflection and transmission coefficients, and ME-STARS element positions, subject to transmit-power, user-rate, minimum inter-element spacing, and movement-region constraints. The resulting problem is highly non-convex due to the strong coupling among the design variables and the position-dependent channels. To address this challenge, an iterative optimization framework is developed in which the transmit beamforming, STARS coefficients, and element positions are successively optimized through tractable convex reformulations. In particular, the element positions are updated sequentially using a majorization--minimization (MM) framework, where quadratic surrogate functions are constructed from the first- and second-order derivatives of the position-dependent channels while preserving the minimum inter-element spacing constraint. Simulation results demonstrate that the proposed ME-STARS design consistently outperforms the considered benchmark schemes. Moreover, the performance gains remain significant under increasing CSI uncertainty, highlighting the effectiveness of element repositioning for robust RSMA transmission.

0.48

Optimization of Joint Beamforming in RIS-aided Multi-carrier and Multi-user MIMO Systems

cs.NI ·2026-11-04 ·Nuwan Balasuriya, Atefeh Termehchi, Ekram Hossain
similarity 0.63
Abstract

Reconfigurable intelligent surface (RIS)-aided multiple-input multiple-output (MIMO) communication is a promising enabler for beyond-fifth-generation wireless networks. However, RIS phase shifters typically rely on a tuning element (for example a variable-length stub), which can be optimally configured for only one carrier frequency at a time. This constraint complicates RIS deployment in multi-carrier systems and often necessitates additional measures, such as using multiple RIS panels or partitioning RIS elements across carriers. In this work, we propose a novel scheme in which all RIS elements simultaneously serve multiple carriers, delivering improved performance over existing approaches. Our method leverages the multiple reflections captured by physically consistent RIS models to realize the desired phase shifts for all carriers using a single stub length setting. We further develop a joint active and passive beamforming optimization framework tailored to multi-carrier, physically consistent RIS-aided systems. Simulation results confirm the effectiveness of the proposed

0.23

Flexible Beamforming via Fluid Antenna Array: From Discrete to Continuous Array

cs.IT ·2026-10-25 ·Jingyuan Xu, Yuanhui Wu, Zhentian Zhang, Zaichen Zhang, Tuo Wu +4 more
similarity 0.63
Abstract · 12 pages, 9 figures. Submitted to IEEE Transactions on Wireless Communications

Fluid antenna arrays (FAAs) reconfigure their effective aperture by activating radiation ports from a dense set of candidate positions within a finite physical region, thereby offering geometry diversity beyond conventional fixed arrays. This paper studies arbitrary-direction far-field beam synthesis with a planar FAA. Since a fixed array adapts its beamforming weights on a predetermined spatial sampling structure, its ability to match desired beam patterns is limited when both the aperture and the number of active elements are constrained. To exploit the geometry diversity of the FAA, we propose a coarse-to-fine scheme that couples discrete port selection with continuous joint refinement. In the coarse stage, a fast Fourier transform (FFT) based phase retrieval step converts the amplitude-only beam specification into an aperture-compatible complex target, after which an FFT-tailored greedy method selects the active ports and least squares initializes their complex weights. In the fine stage, a projected adaptive moment estimation procedure jointly refines the continuous port positions and beamforming weights while enforcing the minimum interelement spacing. For the evaluated two-beam configuration, the proposed scheme increases the mainlobe energy fraction from 35.73% to 48.92% and reduces the peak sidelobe level from -2.30 dB to -3.83 dB relative to a fixed array with the same aperture and active-port count.

0.30

Discrete Phase-Shift Optimization of Reconfigurable Intelligent Surfaces using Uniform Reference Directions

cs.PF cs.ITeess.SY ·2026-10-17 ·Pavithra P., Manoj Kumar Panda, Chandramani Singh
similarity 0.62
Abstract

Reconfigurable Intelligent Surfaces (RISs) enable programmable control of the wireless propagation environment through adjustable reflecting elements. A fundamental challenge in RIS-assisted communications is the optimization of discrete phase shifts to maximize the received signal power. While recently developed algorithms can obtain optimal solutions with linear complexity, their computational cost may still be excessive in applications requiring large-scale simulations, real-time adaptation, or repeated optimization over numerous channel realizations. This paper proposes a low-complexity discrete phase-shift optimization algorithm based on multiple reference directions within the feasible optimality sector. By evaluating candidate phase configurations generated from uniformly distributed reference directions, the proposed method systematically improves upon existing approximation approaches that rely on a fixed set of reference directions. The number of reference directions serves as a design parameter that enables a controllable trade-off between computational complexity and optimality. Extensive simulations demonstrate that the proposed algorithm achieves substantial computational speedups while maintaining a small optimality gap relative to the optimal solution. The results further show that increasing the number of reference directions progressively reduces the optimality gap, providing flexible operating points that can be tailored to application-specific complexity and performance requirements.

0.22

Learning-Assisted Beamforming Optimization for Hybrid XL-RIS-Aided Communication

cs.IT ·2026-11-07 ·Awuni Mohammed Abdul-Razak, Kyungchun Lee
similarity 0.62
Abstract · 13 pages, 8 figures

Hybrid active-passive extremely large-scale reconfigurable intelligent surface (XL-RIS) architectures mitigate the double-hop path loss of passive RIS while enabling near-field spatial energy focusing, but impose a computationally intensive mixed discrete-continuous beamforming design problem under strict radio-frequency (RF) power constraints. This paper investigates a hybrid XL-RIS-assisted downlink multi-user multiple-input single-output (MU-MISO) system in the near-field regime. The joint optimization of the base station (BS) precoder, discrete XL-RIS phase shifts, and active-element amplification gains is addressed via a discrete coordinate ascent (DCA)-based alternating optimization (AO) framework, in which discrete variables are updated through local index-domain searches and the BS precoder is derived in closed form via a noise-aware minimum mean-square error (MMSE) criterion. To reduce the per-sample computational cost for XL-RIS apertures, a deep unfolding (DU) framework is proposed as a low-complexity alternative, unrolling a fixed number of Riemannian gradient ascent steps on the sum-rate objective and recovering the discrete phase configuration via quantized phasor projection, with one learnable step size per layer trained in a self-supervised manner. Numerical results under near-field spherical-wave channel models confirm that the DU framework achieves sum-rate performance close to the AO scheme with substantially lower and nearly constant runtime, and that both schemes consistently outperform manifold optimization under discrete hardware constraints.

0.19

An Efficient SIM Beamforming Scheme Based on Physical-Empowered Projected Gradient

eess.SP ·2026-10-29 ·Yuzhi Yang, Hao Liu, Tianhao Guo, Jiancheng An, Lu Gan +2 more
similarity 0.62
Abstract · under review by ieee trans

Stacked Intelligent Metasurfaces (SIMs) have emerged as a promising technology for next-generation wireless systems. Especially in multi-input multi-output (MIMO) systems, it has the potential to realize complicated wave-domain transformations with low hardware costs and energy consumption. However, SIM-assisted MIMO systems face two major challenges in channel estimation and beamforming. As the SIM elements do not have the signal processing capability, channel estimation can only be conducted in an indirect manner, which makes it challenging. Moreover, the precoding optimization after channel estimation is non-convex and also difficult. Targeting these issues, we exploit the time-division duplex (TDD) channel reciprocity to calculate the gradient backpropagation in an over-the-air manner. Based on this structure, we propose a gradient-based optimization framework that optimizes beamforming without explicitly estimating the SIM--UE channel. The proposed method, namely the physical projected gradient descent (P2GD) method, optimizes the achievable sum rate while incorporating zero-forcing (ZF) constraints. Based on the method of incorporating the ZF restriction, we propose two variations of P2GD, namely user equipment (UE)-P2GD and base station (BS)-P2GD. We also provide a theoretical convergence analysis and projected gradient techniques to ensure physical feasibility. Simulation results show that the proposed approach can achieve suboptimal beamforming in the multi-user system within a small number of over-the-air iterations, using a per-direction signaling budget below the pilot cost of explicit SIM--UE channel estimation. The proposed method provides a low-overhead beamforming scheme for SIM systems without explicit SIM--UE channel estimation.

0.48