CS Paper Radar

Discrete Phase-Shift Optimization of Reconfigurable Intelligent Surfaces using Uniform Reference Directions

Pavithra P., Manoj Kumar Panda, Chandramani Singh

cs.PF cs.ITeess.SY ·submitted 2026-10-17 08:33 UTC · v1

Abstract

Reconfigurable Intelligent Surfaces (RISs) enable programmable control of the wireless propagation environment through adjustable reflecting elements. A fundamental challenge in RIS-assisted communications is the optimization of discrete phase shifts to maximize the received signal power. While recently developed algorithms can obtain optimal solutions with linear complexity, their computational cost may still be excessive in applications requiring large-scale simulations, real-time adaptation, or repeated optimization over numerous channel realizations. This paper proposes a low-complexity discrete phase-shift optimization algorithm based on multiple reference directions within the feasible optimality sector. By evaluating candidate phase configurations generated from uniformly distributed reference directions, the proposed method systematically improves upon existing approximation approaches that rely on a fixed set of reference directions. The number of reference directions serves as a design parameter that enables a controllable trade-off between computational complexity and optimality. Extensive simulations demonstrate that the proposed algorithm achieves substantial computational speedups while maintaining a small optimality gap relative to the optimal solution. The results further show that increasing the number of reference directions progressively reduces the optimality gap, providing flexible operating points that can be tailored to application-specific complexity and performance requirements.

Closest papers

Nearest neighbours by meaning across the whole index.

A Reduced Greedy Minimum Distance Phase Shift Design for Quantized RIS-Assisted Spatial Modulation

eess.SP ·2026-10-12 ·Alexander Kelly, Mark F. Flanagan
benchmark similarity 0.79
Abstract

Reconfigurable intelligent surfaces (RISs) have emerged as a key enabler for next-generation wireless networks, offering control over the propagation environment through nearly passive reflecting elements. When combined with spatial modulation (SM), an RIS shapes a finite set of noise-free signal points at the receiver, and the error rate performance under maximum-likelihood (ML) detection is governed by the smallest pairwise Euclidean distance among these points. In this paper, we propose a low-complexity RIS phase shift design algorithm for RIS-assisted SM under practical discrete phase shift control. The proposed method targets the minimum Euclidean distance directly through a reduced greedy search over the discrete set of RIS phase shifts, in contrast to existing approaches that align RIS phase shifts to maximize the effective channel gain and therefore do not directly address the dominant error events. The search effort is controlled by a small set of integer parameters, providing a tunable trade-off between bit error rate (BER) performance and computational cost. We evaluate the proposed method against continuous and quantized phase-alignment baselines, including a complexity-matched comparison against the most directly comparable benchmark. Numerical results show that the proposed method achieves a significant SNR gain over quantized phase alignment under the same discrete hardware model, and this advantage persists under imperfect channel state information.

0.24

Reconfigurable Intelligent Surfaces: Architectures, Models, and Applications

eess.SY ·2026-10-05 ·Mojtaba Fallahzadeh, Mohammad Hossein Koohi Ghamsari, Alireza Mallahzadeh, Amirhossein Ghasemi, Gabriele Gradoni +1 more
similarity 0.67
Abstract

Reconfigurable Intelligent Surfaces (RIS), also known as programmable metasurfaces, have emerged as a promising technology for next-generation wireless communication systems by enabling programmable control over the propagation environment. Through dynamic manipulation of the phase, amplitude, and polarization of electromagnetic waves, RIS introduces new degrees of freedom for enhancing coverage, spectral efficiency, energy efficiency, and interference management. This article reviews recent advances in RIS-enabled wireless communications, focusing on RIS architectures, emerging design and analysis techniques, and their impact on system-level performance. Key challenges related to scalability, hardware non-idealities, channel modeling, and control overhead are discussed, along with promising solutions and future research directions toward practical RIS deployment in beyond-5G and 6G networks.

0.15

Sharp Minimum-Rate Guarantees for Power-Based Discrete RIS Design

eess.SP ·2026-11-05 ·Hernan X. Cordova
similarity 0.67
Abstract · in the submission process to WCL

We characterise when desired-power optimisation guarantees the minimum user rate (MUR) in discrete reconfigurable intelligent surface systems with fixed precoding. For the weighted sum of desired powers, a bounded channel exists whose exact maximiser starves a user: no positive guarantee exists. For the minimum desired power, the retained fraction of the optimal MUR is at least a sharp constant set by the phase's power quality and residual interference. A semidefinite dual certifies it without enumerating phases. Minimum-power phases keep 88% of the optimum under weak reflection and about half under strong reflection; omitted interference causes most of the loss.

0.17

Optimization of Joint Beamforming in RIS-aided Multi-carrier and Multi-user MIMO Systems

cs.NI ·2026-11-04 ·Nuwan Balasuriya, Atefeh Termehchi, Ekram Hossain
similarity 0.65
Abstract

Reconfigurable intelligent surface (RIS)-aided multiple-input multiple-output (MIMO) communication is a promising enabler for beyond-fifth-generation wireless networks. However, RIS phase shifters typically rely on a tuning element (for example a variable-length stub), which can be optimally configured for only one carrier frequency at a time. This constraint complicates RIS deployment in multi-carrier systems and often necessitates additional measures, such as using multiple RIS panels or partitioning RIS elements across carriers. In this work, we propose a novel scheme in which all RIS elements simultaneously serve multiple carriers, delivering improved performance over existing approaches. Our method leverages the multiple reflections captured by physically consistent RIS models to realize the desired phase shifts for all carriers using a single stub length setting. We further develop a joint active and passive beamforming optimization framework tailored to multi-carrier, physically consistent RIS-aided systems. Simulation results confirm the effectiveness of the proposed

0.23

Joint Beamforming for Continuous Transmissive RIS-Enabled Multiuser Communications

cs.IT ·2026-10-06 ·Beining Han, Shumeng Zhang, Deyou Zhang, Qingchao Li, Jun Liu +1 more
similarity 0.64
Abstract

This paper studies continuous transmissive reconfigurable intelligent surface (CT-RIS)-enabled multiuser downlink communications, where passive beamforming is characterized by a phase function defined over the continuous aperture. We employ a distance-dependent spherical-wave model for the base station (BS)-to-CT-RIS link and introduce a finite-path model based on field-response vectors for the CT-RIS-to-user links. The resulting weighted sum rate maximization problem jointly optimizes the finite-dimensional BS precoders and the infinite-dimensional CT-RIS phase function, giving rise to a mixed finite- and infinite-dimensional non-convex optimization problem. To address this problem, we develop an alternating optimization algorithm that combines a closed-form BS precoder update with a functional phase update derived using the calculus of variations and minorization-maximization. Numerical results demonstrate that the proposed CT-RIS consistently outperforms the considered benchmarks, with the performance gains attributed to spatially continuous phase control and a larger effective receiving area.

0.24

System-Level Gains of Dual-Band RIS: From Wireless Communication to SWIPT

eess.SP ·2026-10-01 ·Aritra Basu, Zina Mohamed, Sonia Aïssa
top venue similarity 0.64
Abstract · This work has been accepted for publication in IEEE Transactions on Communications. 2026 IEEE. Personal use of this material is permitted. P…

This paper introduces the integration of dual-band reconfigurable intelligent surfaces (DBRIS) in wireless system design, and investigates the ensuing performance gains in different application scenarios. This type of metasurfaces offers a compelling technology due to their reduced material usage, compact design, and multi-functional operation across multiple frequency bands compared to single-band RISs. Two representative use cases are considered to assess the achievable performance gains with the said integration, namely, DBRIS-assisted wireless communication, and DBRIS-assisted simultaneous wireless information and power transfer (SWIPT). For the first design, where the DBRIS is deployed as a relay, we focus on the energy efficiency (EE) maximization of the communication system. An alternating manifold method is proposed for the joint optimization of the source transmit power and the DBRIS phase shifting. For the second design, we investigate a DBRIS-assisted SWIPT system using a novel power splitting approach. An EE metric is defined, and an alternating optimization algorithm is developed to maximize it. Numerical results validate the advantages of the proposed design architectures as well as the proposed optimization framework. In particular, we highlight the energy efficiency gains enabled by the DBRIS as compared to operations with conventional single-frequency surfaces, in both application scenarios.

0.40

Robust Joint Beamforming and Configuration Design in FARIS-Aided Systems

eess.SP ·2026-08-28 ·Hong-Bae Jeon, Yonghwi Kim, Hyung-Joo Moon, Kai-Kit Wong
similarity 0.62
Abstract

In this paper, we propose a robust transmission design for multi-user systems assisted by a fluid active reconfigurable intelligent surface (FARIS), which enables both active reflection and dynamic port selection and thereby offers enhanced flexibility, under imperfect channel state information (CSI). We formulate a robust minimum sum-rate maximization problem by jointly optimizing the base station beamformer, the utilized FARIS coefficients, and the active element selection, while explicitly accounting for CSI errors and practical power constraints. The resulting problem is inherently nonconvex due to the coupled optimization variables and discrete port-selection structure. To tackle this challenge, we first reformulate the original problem via a weighted minimum mean square error (WMMSE) approach and then devise an alternating optimization (AO) framework, where each resulting subproblem admits efficient solutions and the overall algorithm converges to a stationary point. Simulation results demonstrate that the proposed robust FARIS scheme consistently outperforms conventional designs, highlighting the effectiveness of jointly leveraging degree-of-freedom (DoF) enhancement and active signal amplification under CSI uncertainty.

0.09

Customizing Wireless Channels via Intelligent Reflecting Surfaces: Feasibility, Fundamental Limits, and Constructive Design

cs.IT ·2026-11-02 ·Xiyuan Liu, Qingqing Wu, Guangji Chen, Yuxuan Chen, Wen Chen
theory similarity 0.61
Abstract · 13 pages, 8 figures

By adjusting their reflection coefficients, intelligent reflecting surfaces (IRSs) can reshape the channels between a base station (BS) and user equipment (UE). Existing studies mainly optimize IRS phase-shifts for communication objectives, leaving the physical attainability of prescribed IRS-reflected channels largely unexplored. This paper investigates channel customization with a phase-only IRS under three progressively relaxed criteria. Observing that the customization mean-squared error (MSE) has the same mathematical form as the signal MSE of a point-to-point multiple-input multiple-output system, we construct a counterpart problem to characterize individual singular-coordinate gain limits and the condition for attaining the amplitude-matching upper bound. To address multi-stream phase conflicts, we analyze principal contribution area (PCA) overlap and derive sufficient array-size conditions for disjoint PCAs under a specified focused-vector construction with parallel uniform linear arrays. We also derive necessary conditions from the two propagation links' singular values and an array-size restriction under the parallel-array Fresnel model. Both the restriction and the construction involve the BS--IRS array-size product. Numerical results show that jointly selecting right singular vectors and IRS phase-shifts reduces mean customization MSE, whereas gains exceeding propagation spectral limits cannot be realized exactly. These results provide design guidance and highlight spectral limits of phase-only IRS channel customization.

0.39