CS Paper Radar

Customizing Wireless Channels via Intelligent Reflecting Surfaces: Feasibility, Fundamental Limits, and Constructive Design

Xiyuan Liu, Qingqing Wu, Guangji Chen, Yuxuan Chen, Wen Chen

cs.IT ·submitted 2026-11-02 10:28 UTC · v1
theory

Abstract

By adjusting their reflection coefficients, intelligent reflecting surfaces (IRSs) can reshape the channels between a base station (BS) and user equipment (UE). Existing studies mainly optimize IRS phase-shifts for communication objectives, leaving the physical attainability of prescribed IRS-reflected channels largely unexplored. This paper investigates channel customization with a phase-only IRS under three progressively relaxed criteria. Observing that the customization mean-squared error (MSE) has the same mathematical form as the signal MSE of a point-to-point multiple-input multiple-output system, we construct a counterpart problem to characterize individual singular-coordinate gain limits and the condition for attaining the amplitude-matching upper bound. To address multi-stream phase conflicts, we analyze principal contribution area (PCA) overlap and derive sufficient array-size conditions for disjoint PCAs under a specified focused-vector construction with parallel uniform linear arrays. We also derive necessary conditions from the two propagation links' singular values and an array-size restriction under the parallel-array Fresnel model. Both the restriction and the construction involve the BS--IRS array-size product. Numerical results show that jointly selecting right singular vectors and IRS phase-shifts reduces mean customization MSE, whereas gains exceeding propagation spectral limits cannot be realized exactly. These results provide design guidance and highlight spectral limits of phase-only IRS channel customization.

Comment
13 pages, 8 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Exploiting Movable-Element STARS for Rate Splitting Multiple Access

eess.SP ·2026-08-17 ·Muhammad Asif, Asim Ihsan, Irfan Muhammad, Mohd Hamza Naim Shaikh, Muhammad Ayzed Mirza +2 more
benchmark similarity 0.62
Abstract · 13 pages, 10 figures

This paper investigates a movable-element simultaneously transmitting and reflecting reconfigurable intelligent surface (ME-STARS) assisted rate-splitting multiple access (RSMA) system under imperfect channel state information (CSI). Unlike conventional STARS with fixed element positions, the elements of ME-STARS can be repositioned within a predefined region, providing additional spatial degrees of freedom for improving the cascaded transmitter--STARS--user channels. To exploit this flexibility while accounting for CSI uncertainty, we formulate a robust sum-rate maximization problem that jointly optimizes the transmit beamforming, common-rate allocation, reflection and transmission coefficients, and ME-STARS element positions, subject to transmit-power, user-rate, minimum inter-element spacing, and movement-region constraints. The resulting problem is highly non-convex due to the strong coupling among the design variables and the position-dependent channels. To address this challenge, an iterative optimization framework is developed in which the transmit beamforming, STARS coefficients, and element positions are successively optimized through tractable convex reformulations. In particular, the element positions are updated sequentially using a majorization--minimization (MM) framework, where quadratic surrogate functions are constructed from the first- and second-order derivatives of the position-dependent channels while preserving the minimum inter-element spacing constraint. Simulation results demonstrate that the proposed ME-STARS design consistently outperforms the considered benchmark schemes. Moreover, the performance gains remain significant under increasing CSI uncertainty, highlighting the effectiveness of element repositioning for robust RSMA transmission.

0.49

Discrete Phase-Shift Optimization of Reconfigurable Intelligent Surfaces using Uniform Reference Directions

cs.PF cs.ITeess.SY ·2026-10-17 ·Pavithra P., Manoj Kumar Panda, Chandramani Singh
similarity 0.61
Abstract

Reconfigurable Intelligent Surfaces (RISs) enable programmable control of the wireless propagation environment through adjustable reflecting elements. A fundamental challenge in RIS-assisted communications is the optimization of discrete phase shifts to maximize the received signal power. While recently developed algorithms can obtain optimal solutions with linear complexity, their computational cost may still be excessive in applications requiring large-scale simulations, real-time adaptation, or repeated optimization over numerous channel realizations. This paper proposes a low-complexity discrete phase-shift optimization algorithm based on multiple reference directions within the feasible optimality sector. By evaluating candidate phase configurations generated from uniformly distributed reference directions, the proposed method systematically improves upon existing approximation approaches that rely on a fixed set of reference directions. The number of reference directions serves as a design parameter that enables a controllable trade-off between computational complexity and optimality. Extensive simulations demonstrate that the proposed algorithm achieves substantial computational speedups while maintaining a small optimality gap relative to the optimal solution. The results further show that increasing the number of reference directions progressively reduces the optimality gap, providing flexible operating points that can be tailored to application-specific complexity and performance requirements.

0.22

Bringing Environmental Enhancement Back to Its Physical Essence via Specular Reflecting Surfaces

cs.IT ·2026-08-15 ·Qingxiao Huang, Qianyao Ren, Yiqin Deng, Jun Huang, Yang Kun +1 more
similarity 0.61
Abstract

Intelligent control of wireless propagation environments is crucial for future network capacity and reliability. Unlike circuit-controlled reconfigurable intelligent surfaces (RIS), mechanically actuated specular reflecting surfaces (SRS) offer a simpler and potentially more cost-effective alternative. In this paper, based on the tractable ray-based cascaded channel model with power-projection correction, we investigate the fundamental operational behaviors of an ideal SRS in free space. Specifically, in the angle-aligned near field, edge reflections cause non-constructive combining, resulting in a damped oscillatory convergence of the gain to an aperture-independent constant. We further obtain the far-field behavior, unbounded-aperture asymptotics, an optimal aperture size and reflection angle, and a gain-based near/far-field boundary. For misalignment, we provide accurate approximations for small and large apertures via center-point and stationary-point analyses. We also define the SRS beam pattern, derive analytical 3-dB beamwidths, and quantify the effective region where a main lobe exists. Finally, we derive a closed-form achievable-rate for an SRS-aided communication system. Numerical results validate the proposed expressions, reveal distinct near-/far-field behaviors of specular reflection, and show that SRS can outperform RIS in the far field due to continuous aperture and angular-resolution control and stronger power projection.

0.04

Statistical Design of Multi-BD-RIS-Assisted User-Centric Cell-Free Massive MIMO

eess.SP ·2026-10-24 ·Mohammad Ezaz, Azadeh Vosoughi
theory similarity 0.60
Abstract · 6 pages, 5 figures. Submitted to IEEE ICC 2027 on Oct 16th 2026

We study the uplink of a user-centric (UC) cell-free massive MIMO system assisted by multiple beyond-diagonal reconfigurable intelligent surfaces (BD-RISs), under imperfect channel state information (CSI) and pilot reuse. The BD-RISs are modeled as reciprocal, lossless, group-connected scattering networks. We first derive the minimum mean-square error (MMSE) estimation statistics for each user's aggregate channel to its serving access points (APs). To avoid frequent CSI acquisition and RIS reconfiguration, we optimize the BD-RIS scattering matrices using long-term channel statistics, allowing their configurations to remain fixed over multiple coherence blocks. Specifically, we minimize the sum of normalized mean-square errors (NMSEs) of the MMSE aggregate channel estimators, subject to the symmetry and unitarity constraints of the group-connected architecture. We develop a product-manifold Riemannian optimization algorithm and analyze its convergence and computational complexity. To evaluate uplink spectral efficiency (SE), we separately derive a closed-form expression for the effective SINR under maximum ratio (MR) combining at the central processing unit (CPU) and establish a lower bound on the achievable ergodic SE. The SINR derivation accounts for the statistical dependence among channels associated with different APs due to shared BD-RIS-assisted propagation paths, including cross-AP second-order statistics under pilot reuse. Numerical results show that moderate group connectivity retains most of the NMSE improvements achieved by full connectivity, with larger optimization gains as BD-RIS-assisted paths strengthen relative to direct AP-user links. They also reveal that lower estimation NMSE does not necessarily lead to higher uplink SE.

0.32

Blind Interference Suppression in IRS-Aided Wireless Systems: A Statistical Channel Ratio Estimation Approach

eess.SP ·2026-09-30 ·Tao Wang, Xiaohui Zhang, Hehe Ban, Pengfei Lv, Yiwei Guo +1 more
theory similarity 0.60
Abstract · 13 pages, 6 figures, submitted to IEEE Internet of Things Journal

This paper addresses the problem of suppressing non-cooperative interference in intelligent reflecting surface (IRS)-aided wireless links without any channel state information (CSI) or cooperation from the interferer. We propose a fully blind framework that relies solely on received signal power measurements. A key insight is that nulling the aggregate interference channel requires only the complex ratios between the IRS-reflected paths and the direct interference link, rather than absolute CSI. We develop a novel estimation algorithm that obtains unbiased estimates of these channel ratios using only power samples collected under random IRS configurations. Theoretically, we prove that unbiased estimation is feasible when the number of discrete phase levels $K\geq 3$, and establish the Cramer-Rao lower bounds (CRLBs) for both the phase offset and amplitude ratio estimates, thus providing design guidance. Based on the estimated ratios, we propose two low-complexity IRS phase optimization algorithms: a one-shot greedy method and an iterative variant that mitigates error propagation from weakly reflecting elements. Simulations demonstrate that the proposed schemes can suppress strong interference to within a few dB of the interference-free upper bound, offering a practical, CSI-free solution for robust wireless communications in contested spectral environments.

0.30

Finite-Resolution Microwave Linear Analog Computer (MiLAC)-Aided Multiuser Beamforming

eess.SP cs.IT ·2026-09-28 ·Zheyu Wu, Bruno Clerckx
theory similarity 0.60
Abstract · 16 pages, 7 figures, submitted to IEEE for possible publication

Large-scale antenna arrays are essential to future wireless networks but impose significant hardware and digital-processing burdens. The microwave linear analog computer (MiLAC) offers a promising architecture for addressing these challenges. In a MiLAC, beamforming is realized entirely in the analog domain through a reconfigurable multiport microwave network comprising tunable admittance elements. However, existing studies assume that these elements are continuously tunable, whereas practical implementations can support only finitely many configurable states. This paper investigates finite-resolution MiLAC-aided multiuser beamforming under lossless and reciprocal constraints with prescribed connectivity patterns. Each tunable susceptance is selected from a symmetric uniform finite-resolution codebook. We formulate an online problem that jointly optimizes the discrete susceptances and power allocation for a prescribed codebook, and an offline problem that designs the codebook based on channel statistics. By exploiting the odd-uniform codebook structure, we express each multilevel susceptance as a weighted sum of two-level variables and develop exact continuous penalty models for both the online beamforming and offline codebook design problems. We prove that, for sufficiently large penalty parameters, these penalty models are globally equivalent to their original discrete counterparts. Building on these formulations, we develop efficient ADMM-based algorithms for solving the two problems. Numerical results demonstrate that the performance of an unquantized fully-connected MiLAC can be approached with substantially reduced connectivity and finite resolution. In particular, a 3-bit stem-connected MiLAC achieves more than 95% of the sum-rate performance of the unquantized fully-connected MiLAC while requiring only 22% of its tunable components.

0.41

Multiuser Channel Estimation in FIM Systems: A Structured Block Term Decomposition Approach

eess.SP ·2026-10-21 ·Xi Han, Junqiao Chen, André L. F. de Almeida, George C. Alexandropoulos
similarity 0.60
Abstract

Flexible intelligent metasurfaces (FIMs) create geometry-dependent array responses that provide spatial diversity but complicate multiuser channel estimation. This paper studies uplink estimation using pilot observations collected under multiple prescribed and calibrated morphing configurations. Each user contributes a matrix--vector block that couples its diagonal reference-array response with its morphing-dependent phases, while its third-mode vector is the known pilot scaled by the complex channel gain. We develop a pilot-constrained structured block term decomposition (BTD) estimator whose alternating least-squares updates exploit both the known pilot directions and the diagonal spatial factors. The undeformed configuration sets the columnwise scaling convention, and a unit first-entry normalization assigns the remaining block scale to the channel gain. Matching the recovered factors to the calibrated spatial--morphing manifold then yields the physical angles and configuration-dependent channels. We characterize the rank conditions for unique conditional least-squares updates, distinguish these conditions from global factor and physical-angle identifiability, and summarize the training, coherence-time, and computational requirements. Simulations show accurate two-dimensional angle and channel recovery in the tested settings, equal total pilot-symbol overhead in rigid-panel comparisons, improved steering-vector estimates as morphing diversity increases, and degradation as user loading or pilot correlation increases.

0.22

Near-Field Beamforming Design for Multi-IRS Wireless Beam Routing

eess.SP ·2026-10-07 ·Tao Wang, Changsheng You, Changchuan Yin
published similarity 0.60
Abstract · 5 pages, 3 figures, accepted by IEEE Communications Letters

This letter investigates efficient near-field beamforming designs for wireless communication systems aided by multiple extremely large-scale intelligent reflecting surfaces (Multi-XL-IRSs). Previous studies have mostly assumed far-field channel conditions, based on which angle-based beamforming is adopted for the base station (BS) and IRSs. However, this approach may lead to degraded performance in practical near-field scenarios. To address this issue, we consider near-field channel modeling and formulate an optimization problem aimed at maximizing the received power at the user equipment (UE) by jointly optimizing the beamforming at the BS and IRSs. Given the intractability under the beam training (BT)-based communication framework, the problem is revisited and reformulated. Subsequently, an efficient algorithm based on alternating optimization (AO) is proposed to solve the reformulated problem. Numerical results demonstrate that, in typical setups, our AO-based beamforming designs provide over 170% and 20% received power gains over conventional angle-based beamforming and beam focusing, respectively. Furthermore, the power scaling law derived under far-field conditions no longer holds in near-field scenarios.

0.56