CS Paper Radar

Blind Interference Suppression in IRS-Aided Wireless Systems: A Statistical Channel Ratio Estimation Approach

Tao Wang, Xiaohui Zhang, Hehe Ban, Pengfei Lv, Yiwei Guo, Ming Yi

eess.SP ·submitted 2026-09-30 03:05 UTC · v1
theory

Abstract

This paper addresses the problem of suppressing non-cooperative interference in intelligent reflecting surface (IRS)-aided wireless links without any channel state information (CSI) or cooperation from the interferer. We propose a fully blind framework that relies solely on received signal power measurements. A key insight is that nulling the aggregate interference channel requires only the complex ratios between the IRS-reflected paths and the direct interference link, rather than absolute CSI. We develop a novel estimation algorithm that obtains unbiased estimates of these channel ratios using only power samples collected under random IRS configurations. Theoretically, we prove that unbiased estimation is feasible when the number of discrete phase levels $K\geq 3$, and establish the Cramer-Rao lower bounds (CRLBs) for both the phase offset and amplitude ratio estimates, thus providing design guidance. Based on the estimated ratios, we propose two low-complexity IRS phase optimization algorithms: a one-shot greedy method and an iterative variant that mitigates error propagation from weakly reflecting elements. Simulations demonstrate that the proposed schemes can suppress strong interference to within a few dB of the interference-free upper bound, offering a practical, CSI-free solution for robust wireless communications in contested spectral environments.

Comment
13 pages, 6 figures, submitted to IEEE Internet of Things Journal

Closest papers

Nearest neighbours by meaning across the whole index.

Blind Interference Suppression for IRS-Aided Robust Wireless Communications

eess.SP ·2026-09-30 ·Tao Wang, Xiaohui Zhang, Hehe Ban, Yiwei Guo, Ming Yi
publishedbenchmark similarity 0.83
Abstract · 13 pages, 13 figures, accepted by IEEE Internet of Things Journal

The application of intelligent reflecting surfaces (IRSs) to suppress interference in wireless communication systems has recently attracted significant research attention. Most existing approaches rely on complete or partial channel state information (CSI) to configure the IRS. However, acquiring accurate CSI in IRS-assisted systems involves considerable pilot overhead and introduces non-negligible delays. This issue is further exacerbated under strong interference conditions, where interfering sources are typically non-cooperative, making CSI acquisition even more challenging. As a result, existing CSI-dependent interference suppression methods become difficult to deploy in practice. To address these limitations, we propose a novel blind interference suppression strategy that combines a proportional phase-inversion (PPI) algorithm with the conditional sample mean (CSM) method. The proposed approach determines the IRS configuration using only the received signal power, without requiring any prior CSI. We conduct a comprehensive performance evaluation by deriving the theoretical performance of the proposed scheme, which is subsequently verified through numerical simulations. Furthermore, simulation results across various parameter settings demonstrate that the proposed blind interference suppression scheme reduces the interference power to the level of noise, thereby achieving a marked signal-to-interference-plus-noise ratio (SINR) improvement and outperforms existing benchmark schemes.

0.73

Blind IRS Beamforming Using Only Received Signal Power Measurements

eess.SP ·2026-09-30 ·Tao Wang, Xiaohui Zhang, Pengfei Lv, Hehe Ban, Yiwei Guo +1 more
published similarity 0.69
Abstract · 6 pages, 4 figures, accepted by 2026 IEEE/CIC International Conference on Communications in China (ICCC)

This paper proposes a novel blind beamforming strategy for signal enhancement aided by an intelligent reflecting surface (IRS), using only samples of the received signal power. Unlike existing conditional sampling mean (CSM) based approaches, which rely solely on comparing the CSM values, the proposed algorithm fully exploits the information in the sampled data by constructing a least squares problem. This enables the estimation of the phase difference between the IRS-reflected channel and the direct channel, ultimately yielding the optimal IRS phase configuration. The simulation results verify that, by fully leveraging the collected data, the proposed scheme outperforms the CSM-based method, especially when the number of IRS phase quantization levels is larger than 2, while incurring the same level of computational complexity.

0.49

Real Interference Alignment for Active IRS-Aided Systems: A Rate-Profile Learning-Based Approach

cs.IT ·2026-08-20 ·Junda Liao, Quanzhong Li, Qi Zhang
similarity 0.64
Abstract

With additional spatial degrees of freedom provided by the active intelligent reflecting surface (IRS), interference alignment (IA) can be achieved at low cost. In this letter, we propose a real IA scheme for an active IRS-aided system. The proposed scheme only requires the IRS to know the instantaneous channel coefficients under the assumption of blocked direct links. To maximize the achievable sum rate subject to individual minimum rate requirements and transmission power constraints, we propose a rate-profile learning-based algorithm. The algorithm uses offline-trained achievable rate profiles to decouple the original problem into multiple feasibility subproblems, which are then solved by generalized eigenvalue decomposition. Simulation results demonstrate that our proposed algorithm outperforms the conventional weighted minimum mean square error algorithm, while requiring significantly less program execution time.

0.25

Customizing Wireless Channels via Intelligent Reflecting Surfaces: Feasibility, Fundamental Limits, and Constructive Design

cs.IT ·2026-11-02 ·Xiyuan Liu, Qingqing Wu, Guangji Chen, Yuxuan Chen, Wen Chen
theory similarity 0.60
Abstract · 13 pages, 8 figures

By adjusting their reflection coefficients, intelligent reflecting surfaces (IRSs) can reshape the channels between a base station (BS) and user equipment (UE). Existing studies mainly optimize IRS phase-shifts for communication objectives, leaving the physical attainability of prescribed IRS-reflected channels largely unexplored. This paper investigates channel customization with a phase-only IRS under three progressively relaxed criteria. Observing that the customization mean-squared error (MSE) has the same mathematical form as the signal MSE of a point-to-point multiple-input multiple-output system, we construct a counterpart problem to characterize individual singular-coordinate gain limits and the condition for attaining the amplitude-matching upper bound. To address multi-stream phase conflicts, we analyze principal contribution area (PCA) overlap and derive sufficient array-size conditions for disjoint PCAs under a specified focused-vector construction with parallel uniform linear arrays. We also derive necessary conditions from the two propagation links' singular values and an array-size restriction under the parallel-array Fresnel model. Both the restriction and the construction involve the BS--IRS array-size product. Numerical results show that jointly selecting right singular vectors and IRS phase-shifts reduces mean customization MSE, whereas gains exceeding propagation spectral limits cannot be realized exactly. These results provide design guidance and highlight spectral limits of phase-only IRS channel customization.

0.39

Joint Transmit Power and Reflection Coefficient Optimization for Underlay Cognitive Radio Ambient Backscatter Communication

eess.SP ·2026-10-31 ·Chabalala S. Chabalala, Peter Odero Akuon, Zhen Gao
theory similarity 0.58
Abstract · Ambient backscatter communication (AmBC), cognitive radio networks (CRNs), interference management, outage performance, power reflection coe…

The integration of cognitive radio (CR) technology with backscatter communication offers a promising solution for developing spectrum-efficient and low-power wireless networks. In this paper, we investigate the performance of an underlay cognitive radio ambient backscatter communication (CR-AmBC) system operating under primary network (PN) interference constraints. The objective is to maximize the performance of the CR-AmBC system while protecting the PN from interference. Differing from prior work, our formulation jointly accounts for: (i) interference from the PN on the CR receivers, (ii) interference from the backscatter device (BD) on the PN receiver, and (iii) imperfect successive interference cancellation (i-SIC) at the secondary destination. We propose a joint transmit power and reflection coefficient optimization framework that incorporates the minimum data rate requirements, the PN interference constraint, and i-SIC for decoding the BD signal. The nonconvex problem is decomposed into two subproblems solved via alternating optimization: (a) a closed-form expression for the feasible transmit power given a fixed reflection coefficient, and (b) an efficient one-dimensional search for the reflection coefficient. We prove that the power update is optimal, reducing the joint problem to a one-dimensional search, with monotone convergence and $\mathcal{O}(KN_β)$ complexity for $K$ iterations and $N_β$ search points. We present a comprehensive simulation-based performance evaluation and the results demonstrate that the proposed joint transmission power and reflection coefficient optimization provides an effective strategy to maximize the performance of the CR-AmBC system without violating the PN protection constraints.

0.07

Rank-Aware Element Grouping for Power-Efficient Multiuser ISAC With an Extremely Large-Scale IRS

eess.SP ·2026-08-17 ·Shengsheng Zhang, Ritao Cheng, Zitong Wang, Meng Hua, Cheng Zhang +1 more
similarity 0.58
Abstract

We investigate power-efficient multiuser integrated sensing and communication (ISAC) assisted by an element-grouping extremely large-scale intelligent reflecting surface (EG-XL-IRS). The grouping pattern is designed using slowly varying statistical channel state information (S-CSI), so that both IRS-related channel acquisition and online passive beamforming operate in the group domain rather than the element domain. We reveal a fundamental gain-rank tradeoff induced by element grouping: phase-consistent grouping can coherently enhance selected deterministic propagation components, while excessive concentration on a common deterministic mode can reduce the effective spatial rank of the multiuser channel and, for extended targets, the diversity of desired-scatterer responses. Motivated by this observation, we develop a task-adaptive rank-aware grouping strategy that balances weak-user enhancement and target-scatterer illumination while preserving task-relevant spatial dimensions. For each candidate grouping pattern, the transmit covariances and group-wise reflection phases are jointly optimized under communication and sensing quality-of-service constraints, followed by physical phase recovery and feasibility verification. Numerical results show that the proposed design substantially reduces the required transmit power compared with representative grouping benchmarks under the same grouping dimension and online optimization budget.

0.25

RIS Configuration with Low-Overhead Measurements via Physics-Guided Neural Networks

eess.SP ·2026-10-20 ·Son Dinh-Van, Matthew D. Higgins
similarity 0.58
Abstract

This paper studies reconfigurable intelligent surface (RIS) configuration for a single-input single-output (SISO) communication link using a two-stage estimate-then-optimize procedure. Within this framework, two common approaches to the estimation stage are pilot-based channel estimation and received signal strength (RSS)-based channel estimation. Our hardware experiments reveal substantial inter-block phase evolution consistent with residual CFO, while simulations show that such phase rotations can severely degrade pilot-based channel estimation when left uncompensated. In contrast, RSS-based approaches are less affected by these phase rotations, although they often require a large number of measurements to achieve a near-optimal received signal-to-noise ratio (SNR). To address this measurement requirement, we propose parametric physics-guided neural blind beamforming (\textsc{P-PGNBB}) for RSS-based channel estimation. Simulations and hardware experiments confirm that the proposed method achieves a received SNR close to that obtained with perfect channel state information (CSI) and comparable to existing methods, while requiring substantially fewer RSS measurements.

0.20

Pilot-Projected Nonlinear Self-Interference Estimation with Simultaneous Uplink Training

cs.IT ·2026-10-16 ·Seyed Mohammad Azimi-Abarghouyi, Thomas Eriksson
similarity 0.57
Abstract

This paper considers nonlinear digital self-interference (SI) cancellation and uplink-channel estimation for single-antenna in-band full-duplex radios when a desired uplink pilot is present during SI training. In this setting, a rich nonlinear SI dictionary can absorb part of the structured pilot response, while its large and correlated set of basis functions can make reliable SI estimation difficult, particularly with limited training. During SI-coefficient estimation, we treat the unknown uplink channel as a nuisance parameter and eliminate it to obtain an equivalent reduced SI estimation problem on the orthogonal complement of the pilot convolution subspace. Since the projected nonlinear dictionary can remain ill conditioned, we develop two complementary full-dictionary estimators: a pilot-projected ridge estimator with Bayesian-information-criterion tuning (PP-RidgeBIC), which uses global ridge shrinkage, and a pilot-projected group-sparse Bayesian estimator (PP-GSBE), which learns branch-dependent Bayesian shrinkage from the data. These estimators offer two complementary operating points: PP-RidgeBIC favors computational efficiency, whereas PP-GSBE provides greater adaptivity to heterogeneous nonlinear SI components. Simulations show substantial gains in SI cancellation and uplink reception over non-projected and hard-selection alternatives; notably, PP-GSBE suppresses the residual SI below the noise floor with moderate training and consistently provides the strongest performance under nonlinear model mismatch.

0.24