CS Paper Radar

Bringing Environmental Enhancement Back to Its Physical Essence via Specular Reflecting Surfaces

Qingxiao Huang, Qianyao Ren, Yiqin Deng, Jun Huang, Yang Kun, Yuguang Fang

cs.IT ·submitted 2026-08-15 15:14 UTC · v1

Abstract

Intelligent control of wireless propagation environments is crucial for future network capacity and reliability. Unlike circuit-controlled reconfigurable intelligent surfaces (RIS), mechanically actuated specular reflecting surfaces (SRS) offer a simpler and potentially more cost-effective alternative. In this paper, based on the tractable ray-based cascaded channel model with power-projection correction, we investigate the fundamental operational behaviors of an ideal SRS in free space. Specifically, in the angle-aligned near field, edge reflections cause non-constructive combining, resulting in a damped oscillatory convergence of the gain to an aperture-independent constant. We further obtain the far-field behavior, unbounded-aperture asymptotics, an optimal aperture size and reflection angle, and a gain-based near/far-field boundary. For misalignment, we provide accurate approximations for small and large apertures via center-point and stationary-point analyses. We also define the SRS beam pattern, derive analytical 3-dB beamwidths, and quantify the effective region where a main lobe exists. Finally, we derive a closed-form achievable-rate for an SRS-aided communication system. Numerical results validate the proposed expressions, reveal distinct near-/far-field behaviors of specular reflection, and show that SRS can outperform RIS in the far field due to continuous aperture and angular-resolution control and stronger power projection.

Closest papers

Nearest neighbours by meaning across the whole index.

Movable-Element STAR-RIS for Integrated Sensing and Communication: Architectures, Opportunities, and Practical Challenges

cs.ET ·2026-09-10 ·Wali Ullah Khan, Muhammad Adil
similarity 0.64
Abstract · 9, 4

Simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs) extend conventional reflecting-only surfaces by enabling controllable full-space propagation. Yet, once deployed, the physical locations of their elements remain fixed, leaving the surface geometry unable to adapt to users, sensing targets, blockage, or near-field focusing conditions. This article develops a system-level perspective on movable-element STAR-RIS (ME--STAR--RIS) for integrated sensing and communication (ISAC), where the surface jointly reconfigures its electromagnetic response and the physical positions of its elements. We explain how geometric reconfiguration can reshape the effective aperture, spatial correlation, interference nulls, and sensing illumination while preserving STAR-RIS full-space operation. A two-timescale control architecture separates relatively slow element motion from fast beamforming and transmission/reflection control. A 100-realization illustrative case study compares ME--STAR--RIS with an otherwise identical fixed STAR-RIS under a passive coupled transmission/reflection response. The results show a substantially improved sampled communication--sensing tradeoff and, importantly, a rapid saturation of the rate gain with modest element travel. We conclude with representative use cases, implementation constraints, and a research roadmap covering mobility overhead, channel acquisition, mutual coupling, near-field operation, hardware impairments, and learning-assisted predictive control.

0.21

Near-Field Beamforming Design for Multi-IRS Wireless Beam Routing

eess.SP ·2026-10-07 ·Tao Wang, Changsheng You, Changchuan Yin
published similarity 0.64
Abstract · 5 pages, 3 figures, accepted by IEEE Communications Letters

This letter investigates efficient near-field beamforming designs for wireless communication systems aided by multiple extremely large-scale intelligent reflecting surfaces (Multi-XL-IRSs). Previous studies have mostly assumed far-field channel conditions, based on which angle-based beamforming is adopted for the base station (BS) and IRSs. However, this approach may lead to degraded performance in practical near-field scenarios. To address this issue, we consider near-field channel modeling and formulate an optimization problem aimed at maximizing the received power at the user equipment (UE) by jointly optimizing the beamforming at the BS and IRSs. Given the intractability under the beam training (BT)-based communication framework, the problem is revisited and reformulated. Subsequently, an efficient algorithm based on alternating optimization (AO) is proposed to solve the reformulated problem. Numerical results demonstrate that, in typical setups, our AO-based beamforming designs provide over 170% and 20% received power gains over conventional angle-based beamforming and beam focusing, respectively. Furthermore, the power scaling law derived under far-field conditions no longer holds in near-field scenarios.

0.56

Extremely Large Beyond-Diagonal RIS: Low-Rank Modal Optimization for Near-Field Communications

eess.SP ·2026-08-11 ·Giovanni Iacovelli, Chandan Kumar Sheemar, Eva Lagunas, Symeon Chatzinotas
theory similarity 0.63
Abstract

Beyond-diagonal reconfigurable intelligent surfaces (BD-RIS) achieve their best performance when fully connected, at the price of an optimization and hardware burden that grows quadratically, and per iteration cubically, with the number of elements. Extremely large surfaces make this burden prohibitive, while their sheer aperture places both the base station and the users in the radiative near field, where far-field design tools break down. This paper introduces the extremely large BD-RIS (XL-BD-RIS) concept and shows that near-field geometry is precisely what makes fully connected performance affordable at scale. Modeling the cascade with the free-space Green function, we prove that the aperture fields live in a low-dimensional subspace spanned by the spherical-wave responses of the terminal positions, and we design a compact unitary modal matrix on this subspace, built from localization information alone, that provably attains the fully connected optimum with a number of reconfigurable entries set by the geometry and independent of the panel size. A weighted-MMSE Riemannian algorithm optimizes the beamformers and the modal matrix with monotone convergence at panel-size-independent cost. Numerical results show that a $24\times24$-element panel reaches the fully connected optimum with about two hundred entries instead of three hundred thousand. A mismatched DFT beamspace pays a sixty-fold entry penalty rooted in the beam spread of spherical wavefronts, while the classical block-wise architecture delivers strictly lower rates at any matched entry budget.

0.34

Movable-Element STAR-RIS for 6G: From Programmable Propagation to Programmable Geometry

cs.ET ·2026-09-08 ·Wali Ullah Khan, Muhammad Adil
similarity 0.63
Abstract · 8, 4

Reconfigurable intelligent surfaces (RISs) make the wireless propagation environment programmable, while simultaneously transmitting and reflecting RISs (STAR-RISs) extend this capability to users located on both sides of a surface. However, conventional STAR-RIS architectures retain a fixed physical geometry after deployment. Movable-element STAR-RIS (ME-STAR-RIS) introduces an additional spatial degree of freedom by allowing the surface elements to reposition within prescribed regions while maintaining electronic control of their transmission and reflection responses. This combination of electromagnetic and geometric reconfiguration can alter propagation distances, multipath combinations, spatial correlation, interference, near-field focusing, and sensing geometry. This article presents a system-level perspective on ME-STAR-RIS through the concept of programmable geometry. We discuss its operating principles, movement architectures, and promising applications in communications, security, near-field systems, sensing, and high-mobility networks. A representative case study comparing optimized fixed and movable STAR-RIS architectures illustrates measurable spectral-efficiency gains from limited local displacement and the resulting saturation behavior. Finally, key hardware, channel-acquisition, electromagnetic, energy, reliability, and control challenges are discussed toward practical ME-STAR-RIS deployment.

0.24

Characterization of Beam-Squint and Beam-Split Effects in RIS-assisted Multi-Frequency Networks

eess.SP ·2026-09-07 ·Mohammad Amin Saeidi, Hina Tabassum
top venue similarity 0.63
Abstract · This paper has been accepted for publication in IEEE journals

Multi-frequency operation in beyond-5G and 6G systems renders the beam directions of large-aperture arrays frequency-dependent, giving rise to beam misalignment effects critical for reconfigurable intelligent surfaces (RISs). When an RIS phase profile is configured at one frequency but illuminated at another, the reflected field may exhibit main-lobe deviation and additional dominant lobes, degrading beamforming performance. In this paper, we develop a unified analytical framework to characterize these effects for uniform planar array-based RISs under both continuous and finite-resolution phase control. We formalize beam-squint as the deviation of the maximum-gain beam from the desired elevation-azimuth angle pair and beam-split as the emergence of additional maximum-gain beams under frequency mismatch and quantization. For continuous-phase RISs, we derive necessary and sufficient peak conditions, obtain closed-form elevation-azimuth peak families, and establish feasibility conditions as functions of the frequency ratio, incidence and configuration angles, and element spacing. Extending the analysis to b-bit phase quantization, we express the quantized beampattern as a superposition of harmonic array responses via Fourier expansion of the quantization-error phasor, leading to closed-form per-harmonic peak families, dominance ordering, and feasibility conditions. To capture peak displacement induced by harmonic superposition, we further develop a perturbation-based correction leveraging dominant-harmonic curvature and residual-harmonic gradients, improving peak-location accuracy without exhaustive two-dimensional searches. Numerical simulations validate the analysis, quantify peak deviations and beam-split probabilities, and demonstrate sum-rate gains by including analytically predicted squinted/split and harmonic candidates in multi-RIS, multi-user, multi-band networks.

0.44

A Physically Consistent Assessment of Nearfield Beamfocusing into Occluded Regions

eess.SP ·2026-08-13 ·Georg Schwan, Alexander Stutz-Tirri, Christoph Studer
positioncode/data similarity 0.62
Abstract · Submitted to a journal

Recent work has explored elaborate beamfocusing techniques for the radiative nearfield, with some studies suggesting that certain beamshapes, such as Airy beams, can enable efficient electromagnetic (EM) wave transmission behind obstacles. In this letter, we ask whether the added complexity of such techniques is justified. We distinguish between partially and fully occluded regions. In the partially occluded region, where Airy beams are commonly employed, we show that a simple line-of-sight (LoS) strategy, which activates only antennas having an unobstructed view of the receiver, is near-optimal and outperforms Airy beams at substantially lower complexity. In the fully occluded region, we argue that accurate beamfocusing requires a physically consistent EM wave propagation model that captures propagation effects such as diffraction. Once such a model is available, however, the optimal beamfocusing strategy has a closed-form solution and can be computed directly. These results suggest that elaborate techniques, such as Airy beams, offer little benefit over simpler alternatives for beamfocusing into occluded regions.

0.51

Reconfigurable Intelligent Surfaces: Architectures, Models, and Applications

eess.SY ·2026-10-05 ·Mojtaba Fallahzadeh, Mohammad Hossein Koohi Ghamsari, Alireza Mallahzadeh, Amirhossein Ghasemi, Gabriele Gradoni +1 more
similarity 0.61
Abstract

Reconfigurable Intelligent Surfaces (RIS), also known as programmable metasurfaces, have emerged as a promising technology for next-generation wireless communication systems by enabling programmable control over the propagation environment. Through dynamic manipulation of the phase, amplitude, and polarization of electromagnetic waves, RIS introduces new degrees of freedom for enhancing coverage, spectral efficiency, energy efficiency, and interference management. This article reviews recent advances in RIS-enabled wireless communications, focusing on RIS architectures, emerging design and analysis techniques, and their impact on system-level performance. Key challenges related to scalability, hardware non-idealities, channel modeling, and control overhead are discussed, along with promising solutions and future research directions toward practical RIS deployment in beyond-5G and 6G networks.

0.15

Customizing Wireless Channels via Intelligent Reflecting Surfaces: Feasibility, Fundamental Limits, and Constructive Design

cs.IT ·2026-11-02 ·Xiyuan Liu, Qingqing Wu, Guangji Chen, Yuxuan Chen, Wen Chen
theory similarity 0.61
Abstract · 13 pages, 8 figures

By adjusting their reflection coefficients, intelligent reflecting surfaces (IRSs) can reshape the channels between a base station (BS) and user equipment (UE). Existing studies mainly optimize IRS phase-shifts for communication objectives, leaving the physical attainability of prescribed IRS-reflected channels largely unexplored. This paper investigates channel customization with a phase-only IRS under three progressively relaxed criteria. Observing that the customization mean-squared error (MSE) has the same mathematical form as the signal MSE of a point-to-point multiple-input multiple-output system, we construct a counterpart problem to characterize individual singular-coordinate gain limits and the condition for attaining the amplitude-matching upper bound. To address multi-stream phase conflicts, we analyze principal contribution area (PCA) overlap and derive sufficient array-size conditions for disjoint PCAs under a specified focused-vector construction with parallel uniform linear arrays. We also derive necessary conditions from the two propagation links' singular values and an array-size restriction under the parallel-array Fresnel model. Both the restriction and the construction involve the BS--IRS array-size product. Numerical results show that jointly selecting right singular vectors and IRS phase-shifts reduces mean customization MSE, whereas gains exceeding propagation spectral limits cannot be realized exactly. These results provide design guidance and highlight spectral limits of phase-only IRS channel customization.

0.39