CS Paper Radar

Sharp Minimum-Rate Guarantees for Power-Based Discrete RIS Design

Hernan X. Cordova

eess.SP ·submitted 2026-11-05 06:56 UTC · v1

Abstract

We characterise when desired-power optimisation guarantees the minimum user rate (MUR) in discrete reconfigurable intelligent surface systems with fixed precoding. For the weighted sum of desired powers, a bounded channel exists whose exact maximiser starves a user: no positive guarantee exists. For the minimum desired power, the retained fraction of the optimal MUR is at least a sharp constant set by the phase's power quality and residual interference. A semidefinite dual certifies it without enumerating phases. Minimum-power phases keep 88% of the optimum under weak reflection and about half under strong reflection; omitted interference causes most of the loss.

Comment
in the submission process to WCL

Closest papers

Nearest neighbours by meaning across the whole index.

Discrete Phase-Shift Optimization of Reconfigurable Intelligent Surfaces using Uniform Reference Directions

cs.PF cs.ITeess.SY ·2026-10-17 ·Pavithra P., Manoj Kumar Panda, Chandramani Singh
similarity 0.67
Abstract

Reconfigurable Intelligent Surfaces (RISs) enable programmable control of the wireless propagation environment through adjustable reflecting elements. A fundamental challenge in RIS-assisted communications is the optimization of discrete phase shifts to maximize the received signal power. While recently developed algorithms can obtain optimal solutions with linear complexity, their computational cost may still be excessive in applications requiring large-scale simulations, real-time adaptation, or repeated optimization over numerous channel realizations. This paper proposes a low-complexity discrete phase-shift optimization algorithm based on multiple reference directions within the feasible optimality sector. By evaluating candidate phase configurations generated from uniformly distributed reference directions, the proposed method systematically improves upon existing approximation approaches that rely on a fixed set of reference directions. The number of reference directions serves as a design parameter that enables a controllable trade-off between computational complexity and optimality. Extensive simulations demonstrate that the proposed algorithm achieves substantial computational speedups while maintaining a small optimality gap relative to the optimal solution. The results further show that increasing the number of reference directions progressively reduces the optimality gap, providing flexible operating points that can be tailored to application-specific complexity and performance requirements.

0.22

S-R3: Secure and Robust RIS-Assisted RSMA under Finite-Resolution Phase Shifts

cs.NI ·2026-11-02 ·Ibrahima Sory Diallo, Elhadj Moustapha Diallo, Wang Mi, Mamadou Aliou Diallo, Amayika Kakati
code/data similarity 0.60
Abstract · 12 pages, 12 figures

This paper investigates a reconfigurable intelligent surface (RIS)-assisted rate-splitting multiple access (RSMA) downlink with imperfect eavesdropper channel state information and finite-resolution RIS phases. The common stream carries public information, while user-specific private streams carry confidential information. For a conservative security assessment, each eavesdropper is allowed to remove the public stream and is given the other private streams as side information. We formulate a robust design of t he transmit precoders, isotropicartificial noise, common-rate allocations, and RIS phases that balances confidential and public throughput under rate and power constraints. Bounded errors in the direct and cascaded eavesdropper channels yield an effective-channel uncertainty bound valid across RIS phase updates. To address the resulting nonconvex problem, we construct conservative leakage bounds and convex inner transmit updates, initialize through a feasibility procedure, and search finite artificial-noise and RIS-phase candidates with explicit feasibility checks. For a fixed artificialnoise power and RIS configuration, the feasible inner iterates have a nondecreasing objective that converges in value, and their successive changes vanish. Accepted outer updates remain feasible and are finite in number. Our code is available at https://github.com/ABM-ADAM/RIS RSMA-secure.

0.32

Robust Joint Beamforming and Configuration Design in FARIS-Aided Systems

eess.SP ·2026-08-28 ·Hong-Bae Jeon, Yonghwi Kim, Hyung-Joo Moon, Kai-Kit Wong
similarity 0.59
Abstract

In this paper, we propose a robust transmission design for multi-user systems assisted by a fluid active reconfigurable intelligent surface (FARIS), which enables both active reflection and dynamic port selection and thereby offers enhanced flexibility, under imperfect channel state information (CSI). We formulate a robust minimum sum-rate maximization problem by jointly optimizing the base station beamformer, the utilized FARIS coefficients, and the active element selection, while explicitly accounting for CSI errors and practical power constraints. The resulting problem is inherently nonconvex due to the coupled optimization variables and discrete port-selection structure. To tackle this challenge, we first reformulate the original problem via a weighted minimum mean square error (WMMSE) approach and then devise an alternating optimization (AO) framework, where each resulting subproblem admits efficient solutions and the overall algorithm converges to a stationary point. Simulation results demonstrate that the proposed robust FARIS scheme consistently outperforms conventional designs, highlighting the effectiveness of jointly leveraging degree-of-freedom (DoF) enhancement and active signal amplification under CSI uncertainty.

0.09

System-Level Gains of Dual-Band RIS: From Wireless Communication to SWIPT

eess.SP ·2026-10-01 ·Aritra Basu, Zina Mohamed, Sonia Aïssa
top venue similarity 0.59
Abstract · This work has been accepted for publication in IEEE Transactions on Communications. 2026 IEEE. Personal use of this material is permitted. P…

This paper introduces the integration of dual-band reconfigurable intelligent surfaces (DBRIS) in wireless system design, and investigates the ensuing performance gains in different application scenarios. This type of metasurfaces offers a compelling technology due to their reduced material usage, compact design, and multi-functional operation across multiple frequency bands compared to single-band RISs. Two representative use cases are considered to assess the achievable performance gains with the said integration, namely, DBRIS-assisted wireless communication, and DBRIS-assisted simultaneous wireless information and power transfer (SWIPT). For the first design, where the DBRIS is deployed as a relay, we focus on the energy efficiency (EE) maximization of the communication system. An alternating manifold method is proposed for the joint optimization of the source transmit power and the DBRIS phase shifting. For the second design, we investigate a DBRIS-assisted SWIPT system using a novel power splitting approach. An EE metric is defined, and an alternating optimization algorithm is developed to maximize it. Numerical results validate the advantages of the proposed design architectures as well as the proposed optimization framework. In particular, we highlight the energy efficiency gains enabled by the DBRIS as compared to operations with conventional single-frequency surfaces, in both application scenarios.

0.40

Rate-Splitting Multiple Access for RIS-Enabled Full-Duplex Communications with User Relaying

cs.IT ·2026-10-13 ·Yuwen Cao, Hui Wang, Tomoaki Ohtsuki, Shahid Mumtaz
similarity 0.59
Abstract

Rate splitting multiple access (RSMA) has emerged as a promising non-orthogonal transmission mechanism to improve spectral- and energy efficiency, and user fairness in multi-antenna broadband channels. To further enhance its performance, in this paper we investigate a novel cooperative RSMA (C-RSMA) transmission framework assisted by reconfigurable intelligent surface (RIS) and user relaying. More specifically, we first formulate the common- and private-rate maximization problem satisfying the transmit power constraint, by jointly optimizing the transmit beamformers at the BS and the reflective beamformer at the RIS. The above formulated problem is an intractable and NP-hard problem as the optimization variables are coupled and the strong residual self-interference (SI) is involved. To conquer the challenge mentioned above, we propose a low-complexity alternative optimization approach to jointly optimize the transmit and reflective beamforming. Simulation results show that our approach is capable of enabling superior sum-rate performance than the RIS-assisted space division multiple access (SDMA), half-duplex RSMA, and SDMA without using RIS schemes.

0.10

Unlocking Downlink NOMA with FARIS: Joint Clustering and Surface Configuration Design

eess.SP ·2026-08-15 ·Hong-Bae Jeon, Tuo Wu
similarity 0.58
Abstract

This paper investigates a fluid active reconfigurable intelligent surface (FARIS)-aided downlink non-orthogonal multiple access (NOMA) system. We formulate a network sum-rate maximization problem that jointly optimizes user clustering, NOMA power allocation, FARIS amplification gains, discrete phase shifts, and fluid element selection under quality-of-service, reflected-power, and hardware constraints. To address the resulting nonconvex mixed-integer problem, we develop a two-stage framework comprising distance-based interleaved clustering for constructing successive-interference-cancellation (SIC)-friendly user groups and per-cluster alternating optimization. The resulting subproblems are handled using geometric programming (GP), fractional programming (FP), majorization-minimization (MM) with mixed-integer phase optimization, and the cross-entropy method (CEM). Numerical results demonstrate rapid convergence, near-optimal performance relative to brute-force search (BFS)-based optimum, and consistently outperforms the benchmarks. These results verify the effectiveness of jointly integrating FARIS and NOMA for high-rate downlink transmission.

0.04

Exploiting Movable-Element STARS for Rate Splitting Multiple Access

eess.SP ·2026-08-17 ·Muhammad Asif, Asim Ihsan, Irfan Muhammad, Mohd Hamza Naim Shaikh, Muhammad Ayzed Mirza +2 more
benchmark similarity 0.58
Abstract · 13 pages, 10 figures

This paper investigates a movable-element simultaneously transmitting and reflecting reconfigurable intelligent surface (ME-STARS) assisted rate-splitting multiple access (RSMA) system under imperfect channel state information (CSI). Unlike conventional STARS with fixed element positions, the elements of ME-STARS can be repositioned within a predefined region, providing additional spatial degrees of freedom for improving the cascaded transmitter--STARS--user channels. To exploit this flexibility while accounting for CSI uncertainty, we formulate a robust sum-rate maximization problem that jointly optimizes the transmit beamforming, common-rate allocation, reflection and transmission coefficients, and ME-STARS element positions, subject to transmit-power, user-rate, minimum inter-element spacing, and movement-region constraints. The resulting problem is highly non-convex due to the strong coupling among the design variables and the position-dependent channels. To address this challenge, an iterative optimization framework is developed in which the transmit beamforming, STARS coefficients, and element positions are successively optimized through tractable convex reformulations. In particular, the element positions are updated sequentially using a majorization--minimization (MM) framework, where quadratic surrogate functions are constructed from the first- and second-order derivatives of the position-dependent channels while preserving the minimum inter-element spacing constraint. Simulation results demonstrate that the proposed ME-STARS design consistently outperforms the considered benchmark schemes. Moreover, the performance gains remain significant under increasing CSI uncertainty, highlighting the effectiveness of element repositioning for robust RSMA transmission.

0.49

Hybrid STAR-RIS Architecture for Joint Localization, Communication, and Power Transfer

eess.SP ·2026-08-12 ·Haoran Ni, Mohammadali Mohammadi, Xidong Mu, Hien Quoc Ngo, Michail Matthaiou
top venue similarity 0.58
Abstract · Accepted for publication in IEEE Transactions on Wireless Communications, Aug. 2026

We propose a hybrid simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) architecture with dynamically switched active and passive elements to support joint localization, communication, and wireless power transfer (WPT). We first pursue a parallel factor analysis with the alternating least squares (PARAFAC-ALS)-based tensor decomposition approach that decouples the base station (BS)-reconfigurable intelligent surface (RIS) and RIS-user channels, thereby enabling low-overhead channel acquisition. Based on this, we formulate a system energy efficiency (EE) maximization problem, subject to the spectral efficiency (SE) requirements of communication users, sensing signal-to-interference-plus-noise ratio constraints, and the nonlinear energy harvesting requirements of energy-harvesting users. The optimization problem is nonconvex since the transmit power allocation, STAR-RIS coefficients, and active/passive mode assignments are tightly coupled in both the objective and constraints. We address this issue by alternating between two subproblems, and solving them via fractional programming, successive convex approximation and a multi-seed greedy strategy employed as an initialization step. Numerical results demonstrate that selectively activating a small, well-chosen subset of STAR-RIS elements achieves 1.5 to 3 times EE improvements compared with fully passive/active architectures, while satisfying communication, sensing, and power-transfer requirements.

0.63