CS Paper Radar

System-Level Gains of Dual-Band RIS: From Wireless Communication to SWIPT

Aritra Basu, Zina Mohamed, Sonia Aïssa

eess.SP ·submitted 2026-10-01 12:03 UTC · v1
top venue

Abstract

This paper introduces the integration of dual-band reconfigurable intelligent surfaces (DBRIS) in wireless system design, and investigates the ensuing performance gains in different application scenarios. This type of metasurfaces offers a compelling technology due to their reduced material usage, compact design, and multi-functional operation across multiple frequency bands compared to single-band RISs. Two representative use cases are considered to assess the achievable performance gains with the said integration, namely, DBRIS-assisted wireless communication, and DBRIS-assisted simultaneous wireless information and power transfer (SWIPT). For the first design, where the DBRIS is deployed as a relay, we focus on the energy efficiency (EE) maximization of the communication system. An alternating manifold method is proposed for the joint optimization of the source transmit power and the DBRIS phase shifting. For the second design, we investigate a DBRIS-assisted SWIPT system using a novel power splitting approach. An EE metric is defined, and an alternating optimization algorithm is developed to maximize it. Numerical results validate the advantages of the proposed design architectures as well as the proposed optimization framework. In particular, we highlight the energy efficiency gains enabled by the DBRIS as compared to operations with conventional single-frequency surfaces, in both application scenarios.

Comment
This work has been accepted for publication in IEEE Transactions on Communications. 2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses

Closest papers

Nearest neighbours by meaning across the whole index.

Reconfigurable Intelligent Surfaces: Architectures, Models, and Applications

eess.SY ·2026-10-05 ·Mojtaba Fallahzadeh, Mohammad Hossein Koohi Ghamsari, Alireza Mallahzadeh, Amirhossein Ghasemi, Gabriele Gradoni +1 more
similarity 0.69
Abstract

Reconfigurable Intelligent Surfaces (RIS), also known as programmable metasurfaces, have emerged as a promising technology for next-generation wireless communication systems by enabling programmable control over the propagation environment. Through dynamic manipulation of the phase, amplitude, and polarization of electromagnetic waves, RIS introduces new degrees of freedom for enhancing coverage, spectral efficiency, energy efficiency, and interference management. This article reviews recent advances in RIS-enabled wireless communications, focusing on RIS architectures, emerging design and analysis techniques, and their impact on system-level performance. Key challenges related to scalability, hardware non-idealities, channel modeling, and control overhead are discussed, along with promising solutions and future research directions toward practical RIS deployment in beyond-5G and 6G networks.

0.15

Discrete Phase-Shift Optimization of Reconfigurable Intelligent Surfaces using Uniform Reference Directions

cs.PF cs.ITeess.SY ·2026-10-17 ·Pavithra P., Manoj Kumar Panda, Chandramani Singh
similarity 0.64
Abstract

Reconfigurable Intelligent Surfaces (RISs) enable programmable control of the wireless propagation environment through adjustable reflecting elements. A fundamental challenge in RIS-assisted communications is the optimization of discrete phase shifts to maximize the received signal power. While recently developed algorithms can obtain optimal solutions with linear complexity, their computational cost may still be excessive in applications requiring large-scale simulations, real-time adaptation, or repeated optimization over numerous channel realizations. This paper proposes a low-complexity discrete phase-shift optimization algorithm based on multiple reference directions within the feasible optimality sector. By evaluating candidate phase configurations generated from uniformly distributed reference directions, the proposed method systematically improves upon existing approximation approaches that rely on a fixed set of reference directions. The number of reference directions serves as a design parameter that enables a controllable trade-off between computational complexity and optimality. Extensive simulations demonstrate that the proposed algorithm achieves substantial computational speedups while maintaining a small optimality gap relative to the optimal solution. The results further show that increasing the number of reference directions progressively reduces the optimality gap, providing flexible operating points that can be tailored to application-specific complexity and performance requirements.

0.22

RIS-Assisted Reliability Maximization for URLLC in Upper Mid-Band 6G Networks

eess.SP ·2026-10-06 ·Muddasir Rahim, Irfan Azam, Soumaya Cherkaoui
similarity 0.60
Abstract

In sixth-generation (6G) networks, supporting ultra-reliable low-latency communication (URLLC) services imposes stringent requirements on reliability, latency, and efficient resource utilization. The upper mid-band (FR3) spectrum has emerged as a promising candidate due to its favorable trade-off between coverage and bandwidth availability. However, achieving high reliability in dense deployments remains challenging due to interference and propagation impairments. To address these challenges, this paper investigates a reconfigurable intelligent surface (RIS)-assisted network operating in the FR3 band. We formulate a joint transmit power allocation and user equipment (UE)-RIS association problem to maximize network reliability under finite blocklength constraints. The resulting problem is nonconvex and combinatorial due to interference coupling and binary association variables. To solve this problem efficiently, we propose a multiphase resource allocation framework that integrates a successive convex approximation (SCA)-based power optimization scheme with a matching theory-based UE-RIS association algorithm. Simulation results show that the proposed scheme outperforms greedy and random baselines and achieves near-optimal performance close to the exhaustive search scheme.

0.20

Near-Field Beamforming Design for Multi-IRS Wireless Beam Routing

eess.SP ·2026-10-07 ·Tao Wang, Changsheng You, Changchuan Yin
published similarity 0.59
Abstract · 5 pages, 3 figures, accepted by IEEE Communications Letters

This letter investigates efficient near-field beamforming designs for wireless communication systems aided by multiple extremely large-scale intelligent reflecting surfaces (Multi-XL-IRSs). Previous studies have mostly assumed far-field channel conditions, based on which angle-based beamforming is adopted for the base station (BS) and IRSs. However, this approach may lead to degraded performance in practical near-field scenarios. To address this issue, we consider near-field channel modeling and formulate an optimization problem aimed at maximizing the received power at the user equipment (UE) by jointly optimizing the beamforming at the BS and IRSs. Given the intractability under the beam training (BT)-based communication framework, the problem is revisited and reformulated. Subsequently, an efficient algorithm based on alternating optimization (AO) is proposed to solve the reformulated problem. Numerical results demonstrate that, in typical setups, our AO-based beamforming designs provide over 170% and 20% received power gains over conventional angle-based beamforming and beam focusing, respectively. Furthermore, the power scaling law derived under far-field conditions no longer holds in near-field scenarios.

0.56

Sharp Minimum-Rate Guarantees for Power-Based Discrete RIS Design

eess.SP ·2026-11-05 ·Hernan X. Cordova
similarity 0.59
Abstract · in the submission process to WCL

We characterise when desired-power optimisation guarantees the minimum user rate (MUR) in discrete reconfigurable intelligent surface systems with fixed precoding. For the weighted sum of desired powers, a bounded channel exists whose exact maximiser starves a user: no positive guarantee exists. For the minimum desired power, the retained fraction of the optimal MUR is at least a sharp constant set by the phase's power quality and residual interference. A semidefinite dual certifies it without enumerating phases. Minimum-power phases keep 88% of the optimum under weak reflection and about half under strong reflection; omitted interference causes most of the loss.

0.17

Joint Power Allocation and Phase-Shift Design for Beyond-Diagonal Stacked Intelligent Metasurfaces-Aided ISAC Systems

cs.IT ·2026-08-19 ·Yuhui Jiao, Qian Zhang, Xuejun Cheng, Meihui Liu, Jiancheng An +1 more
published similarity 0.59
Abstract

Stacked intelligent metasurfaces (SIM) provide an efficient architecture for integrated sensing and communication (ISAC) with few radio-frequency (RF) chains. However, diagonal SIM provide only element-wise phase control, so balancing multiuser communication and sensing performance may require additional layers. In this letter, we propose a beyond-diagonal SIM (BD-SIM) architecture for ISAC, enabling controllable intra-layer coupling through reconfigurable impedance networks, thereby enhancing wave-domain processing flexibility. We develop a unified alternating optimization framework applicable to fully-connected, group-connected, and diagonal SIM architectures. Within this framework, we derive a closed-form power allocation rule and propose an effective variable separation algorithm for multi-layer phase-shift design. Simulation results show that the proposed BD-SIM achieve a better communication-sensing trade-off and require fewer layers to attain performance comparable to conventional SIM.

0.54

Focusing Efficiency for Large Intelligent Surfaces

eess.SP ·2026-10-26 ·Jiawang Li, Alireza Saberkari, Buon Kiong Lau, Mats Gustafsson
similarity 0.58
Abstract

This paper studies wireless power transmission (WPT) with large intelligent surfaces (LISs) in a single-user scenario, with emphasis on power-transfer efficiency. The optimal current distribution on the LIS is derived under a total-power constraint for an arbitrary receiving antenna, providing a theoretical characterization of the maximum achievable focusing efficiency. The analysis shows that the efficiency is strongly affected by the receiving radiation pattern, antenna orientation, and transmission distance. Clear performance differences are observed among practical antenna types for specific orientations, whereas directional averaging makes their average focusing efficiencies much closer. The theoretical findings are further validated by full-wave FEKO simulations, showing good agreement with the predictions of the proposed formulation. These results provide insight into the impact of receiver characteristics and propagation geometry on LIS-enabled WPT and offer a theoretical basis for efficient single-user power-transfer design.

0.26

Hybrid STAR-RIS Architecture for Joint Localization, Communication, and Power Transfer

eess.SP ·2026-08-12 ·Haoran Ni, Mohammadali Mohammadi, Xidong Mu, Hien Quoc Ngo, Michail Matthaiou
top venue similarity 0.58
Abstract · Accepted for publication in IEEE Transactions on Wireless Communications, Aug. 2026

We propose a hybrid simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) architecture with dynamically switched active and passive elements to support joint localization, communication, and wireless power transfer (WPT). We first pursue a parallel factor analysis with the alternating least squares (PARAFAC-ALS)-based tensor decomposition approach that decouples the base station (BS)-reconfigurable intelligent surface (RIS) and RIS-user channels, thereby enabling low-overhead channel acquisition. Based on this, we formulate a system energy efficiency (EE) maximization problem, subject to the spectral efficiency (SE) requirements of communication users, sensing signal-to-interference-plus-noise ratio constraints, and the nonlinear energy harvesting requirements of energy-harvesting users. The optimization problem is nonconvex since the transmit power allocation, STAR-RIS coefficients, and active/passive mode assignments are tightly coupled in both the objective and constraints. We address this issue by alternating between two subproblems, and solving them via fractional programming, successive convex approximation and a multi-seed greedy strategy employed as an initialization step. Numerical results demonstrate that selectively activating a small, well-chosen subset of STAR-RIS elements achieves 1.5 to 3 times EE improvements compared with fully passive/active architectures, while satisfying communication, sensing, and power-transfer requirements.

0.63