CS Paper Radar

RIS-Assisted Reliability Maximization for URLLC in Upper Mid-Band 6G Networks

Muddasir Rahim, Irfan Azam, Soumaya Cherkaoui

eess.SP ·submitted 2026-10-06 17:41 UTC · v1

Abstract

In sixth-generation (6G) networks, supporting ultra-reliable low-latency communication (URLLC) services imposes stringent requirements on reliability, latency, and efficient resource utilization. The upper mid-band (FR3) spectrum has emerged as a promising candidate due to its favorable trade-off between coverage and bandwidth availability. However, achieving high reliability in dense deployments remains challenging due to interference and propagation impairments. To address these challenges, this paper investigates a reconfigurable intelligent surface (RIS)-assisted network operating in the FR3 band. We formulate a joint transmit power allocation and user equipment (UE)-RIS association problem to maximize network reliability under finite blocklength constraints. The resulting problem is nonconvex and combinatorial due to interference coupling and binary association variables. To solve this problem efficiently, we propose a multiphase resource allocation framework that integrates a successive convex approximation (SCA)-based power optimization scheme with a matching theory-based UE-RIS association algorithm. Simulation results show that the proposed scheme outperforms greedy and random baselines and achieves near-optimal performance close to the exhaustive search scheme.

Closest papers

Nearest neighbours by meaning across the whole index.

Hierarchical RIS Association for FR3 Space-Air-Ground Integrated Networks

eess.SP ·2026-10-06 ·Muddasir Rahim, Irfan Azam, Soumaya Cherkaoui
similarity 0.74
Abstract

The growing demand for diverse sixth-generation (6G) applications requires efficient connectivity, seamless service continuity, and extended network coverage. Although terrestrial infrastructures can effectively serve most wireless user equipment (UE), communication reliability may be significantly degraded in remote or blocked environments. To address this challenge, this paper proposes a reconfigurable intelligent surface (RIS)-assisted space-air-ground integrated network (SAGIN) operating in the upper mid-band (FR3) spectrum. The considered network consists of a terrestrial base station (BS), a low Earth orbit (LEO) satellite, multiple terrestrial RISs (TRISs), and unmanned aerial vehicle-mounted RISs (ARISs), where the BS serves as the primary access node, while the LEO satellite provides complementary connectivity when terrestrial links are unavailable or cannot satisfy the required quality-of-service (QoS) requirements. Within this framework, we formulate a hierarchical RIS association problem to maximize the achievable network sum rate under RIS capacity constraints. The resulting optimization problem is a mixed-integer nonconvex problem due to the binary association variables and the coupling among UEs competing for limited RIS resources. To efficiently solve the problem, we develop a hierarchical many-to-one matching-based RIS association framework. Specifically, UEs with satisfactory terrestrial connectivity are first associated with TRISs, whereas UEs that cannot be reliably served by the terrestrial network are subsequently associated with ARISs through the non-terrestrial network. Simulation results demonstrate that the proposed hierarchical association framework significantly outperforms greedy and random association schemes in terms of the achievable network sum rate.

0.24

System-Level Gains of Dual-Band RIS: From Wireless Communication to SWIPT

eess.SP ·2026-10-01 ·Aritra Basu, Zina Mohamed, Sonia Aïssa
top venue similarity 0.60
Abstract · This work has been accepted for publication in IEEE Transactions on Communications. 2026 IEEE. Personal use of this material is permitted. P…

This paper introduces the integration of dual-band reconfigurable intelligent surfaces (DBRIS) in wireless system design, and investigates the ensuing performance gains in different application scenarios. This type of metasurfaces offers a compelling technology due to their reduced material usage, compact design, and multi-functional operation across multiple frequency bands compared to single-band RISs. Two representative use cases are considered to assess the achievable performance gains with the said integration, namely, DBRIS-assisted wireless communication, and DBRIS-assisted simultaneous wireless information and power transfer (SWIPT). For the first design, where the DBRIS is deployed as a relay, we focus on the energy efficiency (EE) maximization of the communication system. An alternating manifold method is proposed for the joint optimization of the source transmit power and the DBRIS phase shifting. For the second design, we investigate a DBRIS-assisted SWIPT system using a novel power splitting approach. An EE metric is defined, and an alternating optimization algorithm is developed to maximize it. Numerical results validate the advantages of the proposed design architectures as well as the proposed optimization framework. In particular, we highlight the energy efficiency gains enabled by the DBRIS as compared to operations with conventional single-frequency surfaces, in both application scenarios.

0.40

Reconfigurable Intelligent Surfaces for Cognitive Radio Networks: Design, Optimization, and Emerging Trends

eess.SP ·2026-08-21 ·Diluka Galappaththige, Chintha Tellambura, Ranga Kulathunga, Gayan Amarasuriya Aruma Baduge
survey similarity 0.59
Abstract · 30 pages, 17 figures, 9 tables, tutorial

Reconfigurable intelligent surfaces (RISs) enable programmable wireless propagation environments, offering new opportunities for cognitive radio networks (CRNs) to improve spectrum utilization, enhance spectral and energy efficiency, and operate reliably under low signal-to-noise ratio conditions. By combining the complementary strengths of RISs and CRNs, RIS-assisted CRNs (RCNs) have emerged as a promising architecture for future 6G wireless systems. Despite their growing importance, a comprehensive survey of this rapidly evolving field has been lacking. This paper fills this gap by providing a systematic and comprehensive review of RCNs. The paper first introduces the fundamentals of CRNs and RISs, including dynamic spectrum access models, spectrum sensing techniques, RIS operating principles, and RIS architectures. It then examines the design of RCNs, covering their system architectures, deployment strategies, channel estimation, spectrum access mechanisms, communication protocols, and the joint optimization of RIS and CRN parameters. Next, the existing literature is organized into six major research directions: performance analysis, resource allocation and optimization, secure RCNs, active RISs, simultaneously transmitting and reflecting RISs, and machine learning-enabled RCNs. Finally, the paper discusses key research challenges and future directions, including scalability, practical deployment, integration with emerging 6G technologies, coexistence with evolving network architectures, standardization, and security and privacy. This survey provides a unified reference for researchers and practitioners and establishes a roadmap for the future development of RCNs.

0.25

SINR-Aware Adaptive Offloading and Resource Allocation in Shared-Spectrum Integrated Terrestrial and Non-Terrestrial Networks

eess.SP ·2026-10-31 ·Aman Khalid, Muhammad Sohaib Aslam, Ahmed Naeem, Seyit Karatepe, Muhammet Kirik +1 more
theory similarity 0.58
Abstract

Sharing the sub-6~GHz spectrum between terrestrial networks and low Earth orbit satellites introduces cross-tier interference in both directions, as terrestrial transmissions can degrade satellite-link reception, while satellite transmissions can impair the performance of terrestrial links. Conventional reference signal received power (RSRP)-based offloading, designed for separate frequency bands, does not account for this cross-tier interference. We study offloading and resource allocation in an integrated terrestrial and non-terrestrial network through a two-timescale framework in which signal-to-interference-plus-noise ratio (SINR)-aware adaptive traffic offloading (SAATO) updates user associations from filtered SINR and load-aware expected throughput, switching a user only across a hysteresis band, while joint cross-tier fractional programming (Joint-FP) optimizes resource allocation for the resulting associations. Under an equal-share resource allocation model, the resulting decision metric approximates the change in proportional-fair utility with an error that decays with load. We prove that joint allocation under the sum-rate utility is nondeterministic polynomial-time (NP)-hard and that the utility sequence accepted by Joint-FP is non-decreasing and convergent. At full spectral overlap, RSRP-based offloading leaves 44\% of user samples below 0.5~Mbps (outage), whereas SAATO with Joint-FP, given instantaneous channel knowledge, leaves none and increases geometric-mean throughput by 8\% and 2\% under half and full spectral overlap, respectively, relative to power control without offloading. It also limits tier switching to at most 0.05 switches per user per minute.

0.20

Energy Efficiency Optimization for 5G NR PDSCH: A Cross-Layer Link Abstraction Framework

eess.SP ·2026-10-04 ·Jaebum Park, Chan-Byoung Chae, Robert W. Heath
similarity 0.58
Abstract · 6 pages, 4 figures

Energy efficiency (EE) optimization for cellular links often assumes Shannon-capacity transmission. The 3GPP New Radio (NR) physical downlink shared channel (PDSCH), however, delivers a transport block whose size is fixed by the modulation and coding scheme (MCS), the rank, and the resource allocation chosen by the scheduler. The transport block must also meet a target block error rate (BLER). In this paper, we optimize EE for the NR PDSCH with the standard transport block size as the throughput and the target BLER as the constraint. Exponential effective signal-to-noise ratio (SNR) mapping (EESM) turns the BLER constraint into a convex per-subcarrier power constraint. We derive a closed-form waterfilling-like power allocation and an EE-maximizing MCS selection rule. With a single calibration parameter per MCS, fitted offline over 3GPP tapped delay line C (TDL-C) channels, EESM predicts the BLER without per-realization link-level simulation. Numerical results show that a Shannon-capacity baseline overestimates the EE of equal-power transmission by 1.5 to 1.7 times at high SNR within the transmit power budget.

0.26

Unlocking Downlink NOMA with FARIS: Joint Clustering and Surface Configuration Design

eess.SP ·2026-08-15 ·Hong-Bae Jeon, Tuo Wu
similarity 0.58
Abstract

This paper investigates a fluid active reconfigurable intelligent surface (FARIS)-aided downlink non-orthogonal multiple access (NOMA) system. We formulate a network sum-rate maximization problem that jointly optimizes user clustering, NOMA power allocation, FARIS amplification gains, discrete phase shifts, and fluid element selection under quality-of-service, reflected-power, and hardware constraints. To address the resulting nonconvex mixed-integer problem, we develop a two-stage framework comprising distance-based interleaved clustering for constructing successive-interference-cancellation (SIC)-friendly user groups and per-cluster alternating optimization. The resulting subproblems are handled using geometric programming (GP), fractional programming (FP), majorization-minimization (MM) with mixed-integer phase optimization, and the cross-entropy method (CEM). Numerical results demonstrate rapid convergence, near-optimal performance relative to brute-force search (BFS)-based optimum, and consistently outperforms the benchmarks. These results verify the effectiveness of jointly integrating FARIS and NOMA for high-rate downlink transmission.

0.04

Minimizing Energy Consumption based on Waste Factor in Multi-user Multi-relay Systems

eess.SP ·2026-10-03 ·Nurullah Sevim, Mostafa Ibrahim, Sabit Ekin, Theodore S. Rappaport
similarity 0.57
Abstract · Submitted to IEEE Transactions on Green Communications and Networking for review

The escalating energy demands of modern wireless networks make energy-efficient system design a central challenge for future 6G deployments. Relay-assisted communication has long been recognized as a powerful tool for improving coverage and throughput, tracing its roots to early repeater communication systems and the foundational relay channel models in information theory. Meanwhile, modern relay selection and routing strategies are primarily driven by rate-based or transmit-power-centric metrics, which often neglect hardware-level losses that is independent of the transmitted signal. As networks grow denser and more heterogeneous, signal-independent hardware inefficiencies and circuit power consumption increasingly dominate the total energy consumption and fundamentally alter the optimality of relay assignment decisions. To address the challenge of modeling signal-independent power consumption in relay-assisted systems, the Waste Factor (WF) framework is adopted: a hardware-aware, unifying metric that explicitly captures signal-independent power losses across cascaded transceivers and wireless channels. Using WF, the energy consumption of multi-user, multi-relay wireless systems is quantified and minimized under practical hardware and network constraints. The formulation jointly accounts for component inefficiencies, propagation losses, and relay-selection constraints. The proposed framework demonstrates that the WF formulation provides a fundamentally new way to model relay-assisted communication, enabling hardware-aware energy-per-bit minimization and a structured representation that enables computationally efficient analysis. Simulation results confirm that WF-based relay assignment reduces total energy per bit while improving the ability of users to satisfy minimum received-power requirements, outperforming conventional formulations across both metrics.

0.26

RIS-Enabled Integrated Access and Relay: Empowering Collaboration Among BSs

cs.NI ·2026-09-22 ·Hao Lin, Mustafa A. Kishk, Mohamed-Slim Alouini
published similarity 0.57
Abstract · 7 pages, 5 figures, 1 table, IEEE Internet of Things Magazine

The increasing number of Internet of Things (IoT) devices and applications leads to severe access congestion in conventional base station (BS) networks. Meanwhile, the low transmit power of IoT devices requires larger diversity gains from the system design. Therefore, low-cost traffic management and signal enhancement mechanisms become essential. Reconfigurable intelligent surfaces (RISs) are increasingly significant due to their flexibility and efficiency. Using reflection, refraction, and amplification, RISs can act as innovative relay nodes to overcome spatial limitations caused by blockages, and improve the coverage range of existing infrastructure. However, more extensive applications of RISs remain to be explored. In this paper, we propose to deploy co-sited RISs on BSs and use the integrated access and relay (IAR) architecture to enable wave-domain task-offloading between BSs, without requiring extra infrastructure or incurring extra decoding latency. Considering the fixed and dynamic sub-carrier schemes, we show the performance improvement in cell-free networks and cellular networks. In addition, we investigate the effect of RIS elements allocated to each IoT device in both cell-free and cellular networks. Finally, we discuss the opportunities and challenges of IAR BSs for future communications design.

0.44