CS Paper Radar

Reconfigurable Intelligent Surfaces for Cognitive Radio Networks: Design, Optimization, and Emerging Trends

Diluka Galappaththige, Chintha Tellambura, Ranga Kulathunga, Gayan Amarasuriya Aruma Baduge

eess.SP ·submitted 2026-08-21 22:20 UTC · v1
survey

Abstract

Reconfigurable intelligent surfaces (RISs) enable programmable wireless propagation environments, offering new opportunities for cognitive radio networks (CRNs) to improve spectrum utilization, enhance spectral and energy efficiency, and operate reliably under low signal-to-noise ratio conditions. By combining the complementary strengths of RISs and CRNs, RIS-assisted CRNs (RCNs) have emerged as a promising architecture for future 6G wireless systems. Despite their growing importance, a comprehensive survey of this rapidly evolving field has been lacking. This paper fills this gap by providing a systematic and comprehensive review of RCNs. The paper first introduces the fundamentals of CRNs and RISs, including dynamic spectrum access models, spectrum sensing techniques, RIS operating principles, and RIS architectures. It then examines the design of RCNs, covering their system architectures, deployment strategies, channel estimation, spectrum access mechanisms, communication protocols, and the joint optimization of RIS and CRN parameters. Next, the existing literature is organized into six major research directions: performance analysis, resource allocation and optimization, secure RCNs, active RISs, simultaneously transmitting and reflecting RISs, and machine learning-enabled RCNs. Finally, the paper discusses key research challenges and future directions, including scalability, practical deployment, integration with emerging 6G technologies, coexistence with evolving network architectures, standardization, and security and privacy. This survey provides a unified reference for researchers and practitioners and establishes a roadmap for the future development of RCNs.

Comment
30 pages, 17 figures, 9 tables, tutorial

Closest papers

Nearest neighbours by meaning across the whole index.

Revolutionizing 6G Wireless Networks with RISs: Enhancements in Sensing and Communications

eess.SP ·2026-10-20 ·Jiguang He, Yuwen Cao, Charles Vanwynsberghe, Aymen Fakhreddine, Yi Fang +3 more
published similarity 0.67
Abstract · 7 pages, 6 figures, accepted by IEEE Communications Magazine

Reconfigurable intelligent surfaces (RISs) have emerged as one of the most promising technologies for the next-generation wireless networks, offering advantages such as cost efficiency, low power consumption, flexible deployment, and large effective aperture. Extensive studies have demonstrated the capabilities of RISs to enhance communication performance, including coverage extension, sum-rate improvement, interference suppression, security enhancement, etc. As 6G networks continue to evolve, wireless sensing is expected to play a pivotal role alongside communication. Undoubtedly, RISs possess great potential to enable seamless integration of sensing and communication by supporting both passive and active sensing paradigms. This paper explores how RISs can revolutionize wireless networks by enhancing both communication and sensing capabilities. Specifically, we highlight the fundamental principles, potential applications, and future trends of RIS-assisted integrated sensing and communication (ISAC), anticipating that RIS-enabled ISAC will become a key enabler in the upcoming 6G era.

0.23

Reconfigurable Intelligent Surfaces: Architectures, Models, and Applications

eess.SY ·2026-10-05 ·Mojtaba Fallahzadeh, Mohammad Hossein Koohi Ghamsari, Alireza Mallahzadeh, Amirhossein Ghasemi, Gabriele Gradoni +1 more
similarity 0.67
Abstract

Reconfigurable Intelligent Surfaces (RIS), also known as programmable metasurfaces, have emerged as a promising technology for next-generation wireless communication systems by enabling programmable control over the propagation environment. Through dynamic manipulation of the phase, amplitude, and polarization of electromagnetic waves, RIS introduces new degrees of freedom for enhancing coverage, spectral efficiency, energy efficiency, and interference management. This article reviews recent advances in RIS-enabled wireless communications, focusing on RIS architectures, emerging design and analysis techniques, and their impact on system-level performance. Key challenges related to scalability, hardware non-idealities, channel modeling, and control overhead are discussed, along with promising solutions and future research directions toward practical RIS deployment in beyond-5G and 6G networks.

0.15

A New Paradigm of 6G Networks: Proactive Channel Cognition and Reconfiguration

eess.SP ·2026-08-30 ·Wenyan Ma, Zixiang Ren, Weitong Zhai, Ge Yan, Lipeng Zhu +2 more
survey similarity 0.62
Abstract

The sixth-generation (6G) wireless networks are expected to enable the deep integration of communication, sensing, computing, control, and intelligence in highly dynamic environments. This evolution drives a fundamental transition from conventional passive channel adaptation to proactive channel cognition and reconfiguration, wherein wireless channels are no longer regarded as uncontrollable propagation media but as network resources that can be learned, predicted, and actively reconfigured. This paper presents a comprehensive overview of this emerging paradigm. We first review channel cognition through the channel knowledge map (CKM) as a systematic framework for learning and exploiting channel characteristics across space, time, and frequency domain. The definitions, construction methods, and applications in wireless networks of CKMs are comprehensively reviewed. Building upon channel cognition, we then review channel reconfiguration technologies from two complementary perspectives: transceiver-side reconfiguration enabled by movable antennas (MAs) and environment-side reconfiguration enabled by intelligent reflecting surfaces (IRSs). For both MA- and IRS-enabled wireless systems, we review their architectures, performance advantages, and key design challenges. Finally, we discuss several promising research directions to inspire further innovations in this burgeoning field.

0.15

From Open RAN to Open Spectrum: A Programmable, Intelligent Architecture for Multi-Service Spectrum Coexistence

cs.NI eess.SP ·2026-09-10 ·Michele Polese, Minh Dat Nguyen, Paolo Testolina, Tommaso Melodia
similarity 0.62
Abstract · Submitted for publication

Considering sharing or coexistence from the perspective of spectrum alone fails to recognize that any spectrum-enabled service also requires (i) radio and processing infrastructure and (ii) a protocol stack, including waveforms and signal processing pipelines. The efficiency of spectrum coexistence frameworks such as Citizen Broadband Radio Service (CBRS) is thus limited to optimizing resource allocation across a single dimension. How to address this limitation, however, remains an open challenge, especially considering the diversity of requirements and operational modes across spectrum services (e.g., sensing, communications, navigation, or positioning). This article introduces Open Spectrum, an architecture that brings softwarization, programmability, and open interfaces to heterogeneous spectrum services, extending the open Radio Access Network (RAN) principles beyond wireless networking. We propose to combine spectrum, services, and infrastructure in a common pool. Its resources are shared and orchestrated by a Spectrum Intelligent Controller (SIC), with plug-and-play spectrum applications, i.e., Spectrum Applications (sApps), and data-driven Radio-Frequency Interference (RFI) modeling using Digital Twins (DTs). We describe the Open Spectrum architecture, shared infrastructure pool, and operational workflows for tenant onboarding and incentives, conflict resolution, and service sharing across sensing, radionavigation, radiolocation, and cellular systems. System-level simulations using the BostonTwin urban DT and Sionna ray tracing show that there exist performance-driven incentives in sharing infrastructure and sharing across multiple services, enabling increased access to spectrum and improvement in median Signal to Interference plus Noise Ratio (SINR) of up to 12 dB.

0.17

RIS-Assisted Reliability Maximization for URLLC in Upper Mid-Band 6G Networks

eess.SP ·2026-10-06 ·Muddasir Rahim, Irfan Azam, Soumaya Cherkaoui
similarity 0.59
Abstract

In sixth-generation (6G) networks, supporting ultra-reliable low-latency communication (URLLC) services imposes stringent requirements on reliability, latency, and efficient resource utilization. The upper mid-band (FR3) spectrum has emerged as a promising candidate due to its favorable trade-off between coverage and bandwidth availability. However, achieving high reliability in dense deployments remains challenging due to interference and propagation impairments. To address these challenges, this paper investigates a reconfigurable intelligent surface (RIS)-assisted network operating in the FR3 band. We formulate a joint transmit power allocation and user equipment (UE)-RIS association problem to maximize network reliability under finite blocklength constraints. The resulting problem is nonconvex and combinatorial due to interference coupling and binary association variables. To solve this problem efficiently, we propose a multiphase resource allocation framework that integrates a successive convex approximation (SCA)-based power optimization scheme with a matching theory-based UE-RIS association algorithm. Simulation results show that the proposed scheme outperforms greedy and random baselines and achieves near-optimal performance close to the exhaustive search scheme.

0.20

VHF Reconfigurable Intelligent Surfaces for Meteor Burst Communication

eess.SY ·2026-09-29 ·Rajiv Thummala, Luke Flores, Gregory Falco
published similarity 0.58
Abstract

Meteor Burst Communication (MBC) utilizes the transient ionized trails left by meteors to reflect Very High Frequency (VHF) signals, enabling long-range, beyond-line-of-sight communication without reliance on terrestrial or satellite infrastructure. Despite its resilience in austere and contested environments, MBC is limited by brief communication windows, low signal-to-noise ratio (SNR), and inconsistent channel availability. Recent advancements in Reconfigurable Intelligent Surfaces (RIS) offer a transformative solution by enabling dynamic control over signal propagation through programmable reflective elements. This paper proposes a novel system architecture that integrates RIS into MBC networks, incorporating real-time adaptive control, optimized deployment strategies, and Monte Carlo simulations to refine RIS placement and operational parameters.

0.38

RIS-Enabled Integrated Access and Relay: Empowering Collaboration Among BSs

cs.NI ·2026-09-22 ·Hao Lin, Mustafa A. Kishk, Mohamed-Slim Alouini
published similarity 0.57
Abstract · 7 pages, 5 figures, 1 table, IEEE Internet of Things Magazine

The increasing number of Internet of Things (IoT) devices and applications leads to severe access congestion in conventional base station (BS) networks. Meanwhile, the low transmit power of IoT devices requires larger diversity gains from the system design. Therefore, low-cost traffic management and signal enhancement mechanisms become essential. Reconfigurable intelligent surfaces (RISs) are increasingly significant due to their flexibility and efficiency. Using reflection, refraction, and amplification, RISs can act as innovative relay nodes to overcome spatial limitations caused by blockages, and improve the coverage range of existing infrastructure. However, more extensive applications of RISs remain to be explored. In this paper, we propose to deploy co-sited RISs on BSs and use the integrated access and relay (IAR) architecture to enable wave-domain task-offloading between BSs, without requiring extra infrastructure or incurring extra decoding latency. Considering the fixed and dynamic sub-carrier schemes, we show the performance improvement in cell-free networks and cellular networks. In addition, we investigate the effect of RIS elements allocated to each IoT device in both cell-free and cellular networks. Finally, we discuss the opportunities and challenges of IAR BSs for future communications design.

0.44

Data-Driven Spectrum Access Technologies for 6G

eess.SP cs.IT ·2026-11-02 ·Foad Sohrabi, Harish Viswanathan, Sivarama Venkatesan, Jinfeng Du, Aliye Özge Kaya +2 more
published similarity 0.57
Abstract · Accepted for publication in the IEEE Communications Magazine

The surge in global mobile traffic, driven by 5G adoption and emerging applications, necessitates new spectrum allocations for 6G systems. With most major swaths of spectrum below 15 GHz already allocated to other services, co-existence between cellular and incumbent services such as satellite or radar systems is critical to make such spectrum accessible for 6G. At the same time, the advent of artificial intelligence offers a new opportunity for designing more efficient spectrum sharing techniques. This paper presents four novel data-driven spectrum access techniques to enable efficient use of spectrum for the 6G era: 1) co-existence technique for efficient protection of fixed incumbent receivers within an established protection area; 2) data-driven approach for protecting satellite receivers via control of radiated power above the horizon; 3) spectrum sensing-based fast-time-scale physical resource block blanking; and 4) base station-based spectrum occupancy detection to enable fast-time-scale spectrum sharing with satellite and non-terrestrial network incumbents. These techniques leverage artificial intelligence and extreme multiple-input multiple-output capabilities to enable efficient spectrum co-existence/sharing while maintaining cellular network performance.

0.34