CS Paper Radar

VHF Reconfigurable Intelligent Surfaces for Meteor Burst Communication

Rajiv Thummala, Luke Flores, Gregory Falco

eess.SY ·submitted 2026-09-29 22:04 UTC · v1
published

Abstract

Meteor Burst Communication (MBC) utilizes the transient ionized trails left by meteors to reflect Very High Frequency (VHF) signals, enabling long-range, beyond-line-of-sight communication without reliance on terrestrial or satellite infrastructure. Despite its resilience in austere and contested environments, MBC is limited by brief communication windows, low signal-to-noise ratio (SNR), and inconsistent channel availability. Recent advancements in Reconfigurable Intelligent Surfaces (RIS) offer a transformative solution by enabling dynamic control over signal propagation through programmable reflective elements. This paper proposes a novel system architecture that integrates RIS into MBC networks, incorporating real-time adaptive control, optimized deployment strategies, and Monte Carlo simulations to refine RIS placement and operational parameters.

DOI
10.2514/6.2025-2719

Closest papers

Nearest neighbours by meaning across the whole index.

Reconfigurable Intelligent Surfaces: Architectures, Models, and Applications

eess.SY ·2026-10-05 ·Mojtaba Fallahzadeh, Mohammad Hossein Koohi Ghamsari, Alireza Mallahzadeh, Amirhossein Ghasemi, Gabriele Gradoni +1 more
similarity 0.62
Abstract

Reconfigurable Intelligent Surfaces (RIS), also known as programmable metasurfaces, have emerged as a promising technology for next-generation wireless communication systems by enabling programmable control over the propagation environment. Through dynamic manipulation of the phase, amplitude, and polarization of electromagnetic waves, RIS introduces new degrees of freedom for enhancing coverage, spectral efficiency, energy efficiency, and interference management. This article reviews recent advances in RIS-enabled wireless communications, focusing on RIS architectures, emerging design and analysis techniques, and their impact on system-level performance. Key challenges related to scalability, hardware non-idealities, channel modeling, and control overhead are discussed, along with promising solutions and future research directions toward practical RIS deployment in beyond-5G and 6G networks.

0.15

Reconfigurable Intelligent Surfaces for Cognitive Radio Networks: Design, Optimization, and Emerging Trends

eess.SP ·2026-08-21 ·Diluka Galappaththige, Chintha Tellambura, Ranga Kulathunga, Gayan Amarasuriya Aruma Baduge
survey similarity 0.58
Abstract · 30 pages, 17 figures, 9 tables, tutorial

Reconfigurable intelligent surfaces (RISs) enable programmable wireless propagation environments, offering new opportunities for cognitive radio networks (CRNs) to improve spectrum utilization, enhance spectral and energy efficiency, and operate reliably under low signal-to-noise ratio conditions. By combining the complementary strengths of RISs and CRNs, RIS-assisted CRNs (RCNs) have emerged as a promising architecture for future 6G wireless systems. Despite their growing importance, a comprehensive survey of this rapidly evolving field has been lacking. This paper fills this gap by providing a systematic and comprehensive review of RCNs. The paper first introduces the fundamentals of CRNs and RISs, including dynamic spectrum access models, spectrum sensing techniques, RIS operating principles, and RIS architectures. It then examines the design of RCNs, covering their system architectures, deployment strategies, channel estimation, spectrum access mechanisms, communication protocols, and the joint optimization of RIS and CRN parameters. Next, the existing literature is organized into six major research directions: performance analysis, resource allocation and optimization, secure RCNs, active RISs, simultaneously transmitting and reflecting RISs, and machine learning-enabled RCNs. Finally, the paper discusses key research challenges and future directions, including scalability, practical deployment, integration with emerging 6G technologies, coexistence with evolving network architectures, standardization, and security and privacy. This survey provides a unified reference for researchers and practitioners and establishes a roadmap for the future development of RCNs.

0.25

RIS-Enabled Integrated Access and Relay: Empowering Collaboration Among BSs

cs.NI ·2026-09-22 ·Hao Lin, Mustafa A. Kishk, Mohamed-Slim Alouini
published similarity 0.58
Abstract · 7 pages, 5 figures, 1 table, IEEE Internet of Things Magazine

The increasing number of Internet of Things (IoT) devices and applications leads to severe access congestion in conventional base station (BS) networks. Meanwhile, the low transmit power of IoT devices requires larger diversity gains from the system design. Therefore, low-cost traffic management and signal enhancement mechanisms become essential. Reconfigurable intelligent surfaces (RISs) are increasingly significant due to their flexibility and efficiency. Using reflection, refraction, and amplification, RISs can act as innovative relay nodes to overcome spatial limitations caused by blockages, and improve the coverage range of existing infrastructure. However, more extensive applications of RISs remain to be explored. In this paper, we propose to deploy co-sited RISs on BSs and use the integrated access and relay (IAR) architecture to enable wave-domain task-offloading between BSs, without requiring extra infrastructure or incurring extra decoding latency. Considering the fixed and dynamic sub-carrier schemes, we show the performance improvement in cell-free networks and cellular networks. In addition, we investigate the effect of RIS elements allocated to each IoT device in both cell-free and cellular networks. Finally, we discuss the opportunities and challenges of IAR BSs for future communications design.

0.44

Revolutionizing 6G Wireless Networks with RISs: Enhancements in Sensing and Communications

eess.SP ·2026-10-20 ·Jiguang He, Yuwen Cao, Charles Vanwynsberghe, Aymen Fakhreddine, Yi Fang +3 more
published similarity 0.57
Abstract · 7 pages, 6 figures, accepted by IEEE Communications Magazine

Reconfigurable intelligent surfaces (RISs) have emerged as one of the most promising technologies for the next-generation wireless networks, offering advantages such as cost efficiency, low power consumption, flexible deployment, and large effective aperture. Extensive studies have demonstrated the capabilities of RISs to enhance communication performance, including coverage extension, sum-rate improvement, interference suppression, security enhancement, etc. As 6G networks continue to evolve, wireless sensing is expected to play a pivotal role alongside communication. Undoubtedly, RISs possess great potential to enable seamless integration of sensing and communication by supporting both passive and active sensing paradigms. This paper explores how RISs can revolutionize wireless networks by enhancing both communication and sensing capabilities. Specifically, we highlight the fundamental principles, potential applications, and future trends of RIS-assisted integrated sensing and communication (ISAC), anticipating that RIS-enabled ISAC will become a key enabler in the upcoming 6G era.

0.23

LIVE-RIS: A Comprehensive In-Flight Dataset for UAV-Mounted RIS Channel Measurements

eess.SP eess.SY ·2026-09-28 ·David Müller, Kevin Weinberger, Aydin Sezgin, Martin Mönnigmann
similarity 0.57
Abstract · 6 pages, 5 figures, Submitted to ICC2027

The dynamic control of the wireless propagation environment enabled by reconfigurable intelligent surfaces (RISs) makes them a promising technology for sixth-generation (6G) wireless networks. Beyond conventional fixed-position deployments, integrating a RIS with an unmanned aerial vehicle (UAV) provides additional spatial flexibility, facilitating favorable Line-of-Sight (LoS) conditions and broadening the range of potential applications. Although UAV-mounted RIS systems have attracted significant research interest, existing studies rely predominantly on numerical simulations and often overlook the impact of practical constraints and real-world disturbances. To address this gap, the authors recently presented the first UAV-mounted RIS prototype and experimentally validated its feasibility through real-world experiments. By using the UAV's extended Kalman Filter (EKF) for real-time RIS reconfiguration, the proposed system effectively mitigates disturbance effects and preserves the performance gains of the RIS-enabled link. To further advance UAV-mounted RIS research and facilitate broader access to real-world experimental insights, this work provides a comprehensive dataset collected from multiple flight experiments. The dataset includes EKF state estimates, ground-truth measurements, corresponding RIS configurations, and S21 channel data.

0.15

Movable-Element STAR-RIS for 6G Non-Terrestrial Networks: Architectures, Enabling Technologies, and Open Challenges

eess.SP ·2026-09-10 ·Wali Ullah Khan, Muhammad Adil
similarity 0.56
Abstract · 9, 4

Non-terrestrial networks (NTNs) are emerging as a key component of 6G systems by extending ubiquitous and resilient connectivity across satellite, aerial, and terrestrial layers. However, severe propagation loss, rapidly varying geometry, Doppler, blockage, and stringent payload and energy constraints make efficient beam and propagation control particularly challenging. Movable-element STAR-RIS (ME-STAR-RIS) offers a new approach by combining full-space transmission/reflection control with reconfigurable surface geometry, thereby introducing an additional spatial degree of freedom for geometry-aware NTN operation. In this article, we first describe the operating principle, movement constraints, and potential hardware realizations of ME-STAR-RIS, and then present representative satellite-borne, aerial-relay, and cross-tier NTN architectures. We discuss the key enabling mechanisms, including joint geometry--electromagnetic optimization, mobility-aware channel acquisition, multi-timescale control, and predictive configuration. A LEO-centered numerical case study compares ME-STAR-RIS with an otherwise identical fixed STAR-RIS and demonstrates the benefit of element mobility across different transmit powers, movement ranges, and surface sizes, while revealing diminishing returns from increasingly large displacements. Finally, we discuss the main hardware, CSI, scalability, near-field, sensing, security, reliability, and standardization challenges, and highlight promising directions toward practical ME-STAR-RIS-enabled NTNs

0.18

Movable-Element STAR-RIS for 6G: From Programmable Propagation to Programmable Geometry

cs.ET ·2026-09-08 ·Wali Ullah Khan, Muhammad Adil
similarity 0.55
Abstract · 8, 4

Reconfigurable intelligent surfaces (RISs) make the wireless propagation environment programmable, while simultaneously transmitting and reflecting RISs (STAR-RISs) extend this capability to users located on both sides of a surface. However, conventional STAR-RIS architectures retain a fixed physical geometry after deployment. Movable-element STAR-RIS (ME-STAR-RIS) introduces an additional spatial degree of freedom by allowing the surface elements to reposition within prescribed regions while maintaining electronic control of their transmission and reflection responses. This combination of electromagnetic and geometric reconfiguration can alter propagation distances, multipath combinations, spatial correlation, interference, near-field focusing, and sensing geometry. This article presents a system-level perspective on ME-STAR-RIS through the concept of programmable geometry. We discuss its operating principles, movement architectures, and promising applications in communications, security, near-field systems, sensing, and high-mobility networks. A representative case study comparing optimized fixed and movable STAR-RIS architectures illustrates measurable spectral-efficiency gains from limited local displacement and the resulting saturation behavior. Finally, key hardware, channel-acquisition, electromagnetic, energy, reliability, and control challenges are discussed toward practical ME-STAR-RIS deployment.

0.24

Orientation-Aware Control and Trajectory Design for Aerial RIS-Assisted Wireless Communications

cs.NI cs.RO ·2026-09-19 ·Abdoul Karim A. H. Saliah, Hajar El Hammouti, Daniel Bonilla Licea, Giuseppe Silano
published similarity 0.55
Abstract · Accepted for publication in IEEE Transactions on Vehicular Technology. Copyright (c) 20xx IEEE. Personal use of this material is permitted. …

Aerial Reconfigurable Intelligent Surfaces (ARISs) can enhance wireless connectivity in obstructed environments by combining reconfigurable metasurfaces with aerial mobility. However, in practical deployments, the Reconfigurable Intelligent Surface (RIS) is rigidly mounted on a multi-rotor Unmanned Aerial Vehicle (UAV), which creates coupled position-orientation dynamics that directly affect communication quality. Since RIS performance is highly sensitive to orientation, point-mass or orientation-invariant models may lead to optimistic performance estimates. This paper proposes an orientation-aware ARIS framework that explicitly accounts for UAV dynamics, actuation limits, and orientation-dependent channels. The proposed approach combines a communications-guided reference trajectory planner with a Nonlinear Model Predictive Control for dynamically feasible trajectory tracking and favorable RIS orientation, while employing lightweight beamforming and RIS phase-shift updates. Simulations show that accounting for orientation improves user throughput by 13.77%, while the proposed joint communication updates improve network throughput by 28% over phase-shift-only optimization and by at least a factor of 2.5 over beamforming-only optimization. These results highlight the importance of orientation-aware modeling and joint communication-control design in ARIS-assisted wireless systems.

0.25