CS Paper Radar

LIVE-RIS: A Comprehensive In-Flight Dataset for UAV-Mounted RIS Channel Measurements

David Müller, Kevin Weinberger, Aydin Sezgin, Martin Mönnigmann

eess.SP eess.SY ·submitted 2026-09-28 12:02 UTC · v1

Abstract

The dynamic control of the wireless propagation environment enabled by reconfigurable intelligent surfaces (RISs) makes them a promising technology for sixth-generation (6G) wireless networks. Beyond conventional fixed-position deployments, integrating a RIS with an unmanned aerial vehicle (UAV) provides additional spatial flexibility, facilitating favorable Line-of-Sight (LoS) conditions and broadening the range of potential applications. Although UAV-mounted RIS systems have attracted significant research interest, existing studies rely predominantly on numerical simulations and often overlook the impact of practical constraints and real-world disturbances. To address this gap, the authors recently presented the first UAV-mounted RIS prototype and experimentally validated its feasibility through real-world experiments. By using the UAV's extended Kalman Filter (EKF) for real-time RIS reconfiguration, the proposed system effectively mitigates disturbance effects and preserves the performance gains of the RIS-enabled link. To further advance UAV-mounted RIS research and facilitate broader access to real-world experimental insights, this work provides a comprehensive dataset collected from multiple flight experiments. The dataset includes EKF state estimates, ground-truth measurements, corresponding RIS configurations, and S21 channel data.

Comment
6 pages, 5 figures, Submitted to ICC2027

Closest papers

Nearest neighbours by meaning across the whole index.

Orientation-Aware Control and Trajectory Design for Aerial RIS-Assisted Wireless Communications

cs.NI cs.RO ·2026-09-19 ·Abdoul Karim A. H. Saliah, Hajar El Hammouti, Daniel Bonilla Licea, Giuseppe Silano
published similarity 0.72
Abstract · Accepted for publication in IEEE Transactions on Vehicular Technology. Copyright (c) 20xx IEEE. Personal use of this material is permitted. …

Aerial Reconfigurable Intelligent Surfaces (ARISs) can enhance wireless connectivity in obstructed environments by combining reconfigurable metasurfaces with aerial mobility. However, in practical deployments, the Reconfigurable Intelligent Surface (RIS) is rigidly mounted on a multi-rotor Unmanned Aerial Vehicle (UAV), which creates coupled position-orientation dynamics that directly affect communication quality. Since RIS performance is highly sensitive to orientation, point-mass or orientation-invariant models may lead to optimistic performance estimates. This paper proposes an orientation-aware ARIS framework that explicitly accounts for UAV dynamics, actuation limits, and orientation-dependent channels. The proposed approach combines a communications-guided reference trajectory planner with a Nonlinear Model Predictive Control for dynamically feasible trajectory tracking and favorable RIS orientation, while employing lightweight beamforming and RIS phase-shift updates. Simulations show that accounting for orientation improves user throughput by 13.77%, while the proposed joint communication updates improve network throughput by 28% over phase-shift-only optimization and by at least a factor of 2.5 over beamforming-only optimization. These results highlight the importance of orientation-aware modeling and joint communication-control design in ARIS-assisted wireless systems.

0.25

Unified Analytical Framework for Emergency RIS-UAV Networks Under Practical Impairments

eess.SP ·2026-08-11 ·Yinong Chen, Wenchi Cheng, Jingqing Wang, Jiangzhou Wang
top venuebenchmark similarity 0.61
Abstract

Heterogeneous unmanned aerial vehicle (UAV) networks embedded with reconfigurable intelligent surfaces (RISs) present a promising paradigm for emergency wireless communications (EWC), offering enhanced coverage and resilience in harsh environments. However, extreme conditions in disaster areas necessitate robust performance evaluation under practical impairments, including outdated/imperfect channel state information (CSI) and discrete RIS phase shifts. Existing works lack a unified analytical framework for modeling CSI errors, employing inconsistent approaches that treat errors either as channel gain or as equivalent interference, leading to ambiguous benchmarks. To address this, we propose the $ζ$-Model, a unified receiver-equivalent signal-to-noise (SNR) framework that continuously parameterizes residual-error exploitability via $ζ$. This framework unifies the information-theoretic model (ITM) and the engineering baseline model (EBM) as the optimistic and pessimistic benchmark receiver treatments, while incorporating the simplified engineering model (SEM) as a tractable approximation. By employing the Fisher-Snedecor $\mathcal{F}$ distribution to capture severe fading and shadowing, we derive moment-matching-based closed-form or finite-sum approximate expressions and asymptotic expressions for average capacity (AC), effective capacity (EC), and outage probability (OP) under the proposed unified framework and its boundary cases. Validated by Monte Carlo simulations, our framework quantifies performance limits and provides crucial insights for designing robust and efficient EWC systems under various channel conditions and system impairments.

0.29

Lightweight AI for UAV-Mounted RIS: An Overview

cs.NI ·2026-08-26 ·Sherief Hashima, Kohei Hatano, Eiji Takimoto, Mohamed Rihan, Basem. M. Elhalawany +1 more
survey similarity 0.60
Abstract

Unmanned Aerial Vehicles (UAV)-mounted Reconfigurable Intelligent Surfaces (RIS) have emerged as a promising architecture for enhancing wireless coverage, spectral efficiency, and energy performance in 6G networks. By combining programmable electromagnetic wave manipulation with aerial mobility, UAV-RIS systems enable dynamic blockage mitigation, adaptive beamforming, and flexible deployment across terrestrial, maritime, and satellite-integrated environments. However, joint optimization of UAV trajectory, RIS phase configuration, and resource allocation incurs high computational complexity, which is incompatible with the strict energy and onboard processing constraints of UAV platforms. Lightweight AI techniques offer practical solutions to this challenge. Hence, this paper provides a comprehensive overview of lightweight AI techniques for UAV-mounted RIS systems, including Reinforcement Learning (RL), meta-learning, Federated Learning (FL), Multi-Armed Bandits (MAB), and energy-aware optimization. We present a detailed taxonomy and comparative analysis of existing work, highlight computational-energy trade-offs, and identify open research challenges for scalable, energy-efficient airborne intelligent surfaces. Furthermore, we present a case study demonstrating the effect of MAB schemes on throughput and energy efficiency in UAV-mounted RIS.

0.25

Modeling and Performance Analysis for Fluid Antenna System Enabled UAV Near-Field Communications

cs.IT ·2026-08-10 ·Hao Jiang, Wangqi Shi, Zhentian Zhang, Xusheng Zhu, Kai-Kit Wong +1 more
similarity 0.60
Abstract

Fluid antenna systems (FASs) offer a promising solution for unmanned aerial vehicle (UAV) air-to-ground (A2G) communications by enabling reconfigurable radiation characteristics. Addressing the limitations of traditional models in capturing the dynamic port configuration of FAS and the near-field nature of UAV communications, this paper proposes a dynamic port-reconfigurable near-field channel model for FAS-assisted UAV-to-mobile user (MU) links. Furthermore, we develop a FAS-adaptive subarray partition scheme utilizing a greedy strategy. By decomposing line-of-sight (LoS) and non-line-of-sight (NLoS) components and integrating UAV motion dynamics with FAS port activation states, the proposed model accurately characterizes the non-uniform spatial distribution of near-field channels. The subarray partition scheme dynamically groups active ports to satisfy near-field conditions while significantly reducing computational complexity, supported by a dynamic update algorithm that efficiently handles subarray adjustments during port switching. To avoid low effective gain and deep-fading ports in dense FAS configurations, a channel gain-based selection strategy is employed to prioritize high-gain ports. We derive and analyze the modeling accuracy and channel capacity, investigating the impact of FAS dimensions, port spacing, active port count, and UAV dynamics on system performance. Finally, the computational complexity of the subarray partition scheme is evaluated, verifying its advantages for real-time applications and providing a theoretical foundation for the design and analysis of FAS in dynamic scenarios.

0.32

NLOS-Aware TDOA-Based UAV Localization: Cramér-Rao Bounds, Measurement Modeling, and Experimental Validation

eess.SP ·2026-10-21 ·Cole Dickerson, Saad Masrur, Özgür Özdemir, Ismail Güvenç
similarity 0.59
Abstract · Submitted to IEEE Transactions on Aerospace and Electronic Systems (TAES) on October 21st, 2026

Passive time-difference-of-arrival (TDOA) localization is well suited for tracking non-cooperative unmanned aerial vehicles (UAVs) that do not report their positions. However, its accuracy degrades under the mixed line-of-sight (LOS) and non-line-of-sight (NLOS) propagation that is typical of low-altitude flight. In this paper, we develop NLOS-aware Cramér--Rao lower bounds (CRLBs) and an empirically calibrated measurement model for TDOA-based UAV localization, and we evaluate both with measurements from five UAV flights on the Aerial Experimentation and Research Platform for Advanced Wireless (AERPAW). The analysis yields an identifiability condition that relates the number of sensors to the number of NLOS links, together with a bias-induced error floor that a wider bandwidth cannot remove. The model parameters are estimated by matching simulated and measured error distributions. Experimental results show that the error depends most strongly on the number of sensors in LOS, while a higher altitude and a wider bandwidth lower the median error. Relocating a sensor that is always in NLOS into the open flight area can lower the median horizontal bound by two orders of magnitude if the relocated sensor is in LOS. The fitted model reproduces the median errors of the 2.5 MHz and 5 MHz flights but underestimates the heaviest error tails. Finally, rejecting outlier fixes lowers the error far more than Kalman or particle filtering, because the remaining error is dominated by bias.

0.30

From Ideal Motion to Flight-Executable Communications: LLM-Evolved Multi-UAV Deployment for Cell-Free Massive MIMO

eess.SP ·2026-09-21 ·Yuyao Wang, Gaoze Mu, Yongan Zheng, Yanzhao Hou, Qingqing Wu +3 more
similarity 0.59
Abstract · 13 pages. 12 figures

Cell-free massive multiple-input multiple-output (CF-mMIMO) is a promising paradigm for future wireless networks, providing user-centric services and cooperative coverage. By using unmanned aerial vehicles (UAVs) as aerial access points, CF-mMIMO networks can exploit UAV mobility to enhance three-dimensional (3D) coverage and spectral efficiency (SE). However, most existing studies on UAV deployment for communication optimization typically assume that UAVs follow ideal point-mass motion (IM), neglecting flight-control constraints and finite-horizon position errors in real flight execution. Consequently, IM-trained deployment policies may degrade severely or become difficult to execute in practice. Motivated by this, we model each UAV as a six-degree-of-freedom quadrotor rigid body with a cascaded flight controller to capture the impact of flight-control-constrained motion (FM) on communication optimization. Based on this model, we formulate a joint UAV 3D deployment and power allocation problem under FM to maximize the downlink average SE in CF-mMIMO networks. To address this problem, we propose LERE, a large language model (LLM)-enhanced multi-agent reinforcement learning (MARL) framework. In LERE, the LLM evolves hybrid rewards with both global and local components via multi-level feedback. The evolved hybrid rewards guide MARL policy optimization and promote multi-UAV cooperation. Experimental results demonstrate that LERE achieves higher SE than reward-design baselines while substantially reducing UAV position errors. Notably, when tested under FM execution, the FM-trained LERE policy achieves a 60.49\% SE gain over its IM-trained counterpart, confirming the necessity of incorporating flight-control constraints into UAV-enabled CF-mMIMO optimization.

0.18

UAV-Mounted Hybrid RIS-Assisted ISAC-RSMA: Performance Analysis with Imperfect CSI and SIC

eess.SP cs.ETcs.PFeess.SY ·2026-10-10 ·Chandan Kumar Singh, Arthur Sousa de Sena, Smriti Uniyal, Deepak Kumar, Prabhat K. Upadhyay +1 more
publishedtheory similarity 0.59
Abstract

In integrated sensing and communication (ISAC) systems, strict sensing requirements can substantially constrain the transmit power available for communication. A hybrid reconfigurable intelligent surface (HRIS) with passive reflection and active amplification capabilities mounted on an unmanned aerial vehicle (UAV) can enhance coverage and strengthen communication links in such power-limited regimes. Meanwhile, rate-splitting multiple access (RSMA) provides an effective transmission strategy for managing inter-user interference, particularly in dense multiuser wireless scenarios. Motivated by this, we analyze the performance of a UAV-mounted HRIS-assisted monostatic ISAC system employing RSMA scheme. We consider the imperfections in the channel state information and successive interference cancellation in the RSMA, which are inevitable in practical system implementations. We then derive highly accurate expressions for outage probability, ergodic rate, and throughput to evaluate communication performance over Nakagami-$m$ fading channels. These expressions reveal key insights into the diversity order and coding gain of the system in the high signal-to-noise ratio regime. To characterize the sensing performance, we derive expressions for the probability of detection, the probability of false alarm, and the Cramér-Rao lower bound. Numerical results validate the theoretical findings and highlight the performance gains of the proposed system over conventional multiple-access schemes and RIS-based systems.

0.39

Statistical Channel Model for FSO Systems Assisted by a UAV-Mounted IRS

eess.SP ·2026-08-11 ·Ferdaous Tarhouni, Vasilis K. Papanikolaou, Laura Cottatellucci, Mohammad-Ali Khalighi, Robert Schober
similarity 0.58
Abstract · 13 pages, 3 figures, conference

Integrating optical intelligent reflecting surfaces (IRSs) into aerial platforms, such as unmanned aerial vehicles (UAVs), has been proposed to relax the line-of-sight (LoS) constraint, extend coverage, and enhance deployment flexibility of free space optical (FSO) systems. However, misalignment errors induced by the UAV hovering, in both position and orientation, may degrade connectivity and impair the end-to-end channel quality. In this paper, we develop novel expressions for the electric fields incident on and reflected by an optical IRS, based on the Huygens-Fresnel principle. The resulting expressions are applicable for any combination of incident and reflected propagation directions. Building on this framework, we derive a closed-form statistical channel model that captures the geometric and misalignment losses of an FSO link assisted by a UAV-mounted IRS in the presence of random UAV fluctuations. In particular, we develop a statistical model for the beam misalignment at the receiver lens, assuming Gaussian fluctuations in both the UAV position and orientation. The proposed analytical model is validated through Monte Carlo (MC) simulations and is further used to provide practical design guidelines regarding the optimal placement of the UAV-mounted IRS for the minimization of the outage probability.

0.10