CS Paper Radar

Orientation-Aware Control and Trajectory Design for Aerial RIS-Assisted Wireless Communications

Abdoul Karim A. H. Saliah, Hajar El Hammouti, Daniel Bonilla Licea, Giuseppe Silano

cs.NI cs.RO ·submitted 2026-09-19 17:58 UTC · v1
published

Abstract

Aerial Reconfigurable Intelligent Surfaces (ARISs) can enhance wireless connectivity in obstructed environments by combining reconfigurable metasurfaces with aerial mobility. However, in practical deployments, the Reconfigurable Intelligent Surface (RIS) is rigidly mounted on a multi-rotor Unmanned Aerial Vehicle (UAV), which creates coupled position-orientation dynamics that directly affect communication quality. Since RIS performance is highly sensitive to orientation, point-mass or orientation-invariant models may lead to optimistic performance estimates. This paper proposes an orientation-aware ARIS framework that explicitly accounts for UAV dynamics, actuation limits, and orientation-dependent channels. The proposed approach combines a communications-guided reference trajectory planner with a Nonlinear Model Predictive Control for dynamically feasible trajectory tracking and favorable RIS orientation, while employing lightweight beamforming and RIS phase-shift updates. Simulations show that accounting for orientation improves user throughput by 13.77%, while the proposed joint communication updates improve network throughput by 28% over phase-shift-only optimization and by at least a factor of 2.5 over beamforming-only optimization. These results highlight the importance of orientation-aware modeling and joint communication-control design in ARIS-assisted wireless systems.

Comment
Accepted for publication in IEEE Transactions on Vehicular Technology. Copyright (c) 20xx IEEE. Personal use of this material is permitted. However, permission to use this material for any other purposes must be obtained from the IEEE by sending a request to pubs-permissions@ieee.org

Closest papers

Nearest neighbours by meaning across the whole index.

LIVE-RIS: A Comprehensive In-Flight Dataset for UAV-Mounted RIS Channel Measurements

eess.SP eess.SY ·2026-09-28 ·David Müller, Kevin Weinberger, Aydin Sezgin, Martin Mönnigmann
similarity 0.72
Abstract · 6 pages, 5 figures, Submitted to ICC2027

The dynamic control of the wireless propagation environment enabled by reconfigurable intelligent surfaces (RISs) makes them a promising technology for sixth-generation (6G) wireless networks. Beyond conventional fixed-position deployments, integrating a RIS with an unmanned aerial vehicle (UAV) provides additional spatial flexibility, facilitating favorable Line-of-Sight (LoS) conditions and broadening the range of potential applications. Although UAV-mounted RIS systems have attracted significant research interest, existing studies rely predominantly on numerical simulations and often overlook the impact of practical constraints and real-world disturbances. To address this gap, the authors recently presented the first UAV-mounted RIS prototype and experimentally validated its feasibility through real-world experiments. By using the UAV's extended Kalman Filter (EKF) for real-time RIS reconfiguration, the proposed system effectively mitigates disturbance effects and preserves the performance gains of the RIS-enabled link. To further advance UAV-mounted RIS research and facilitate broader access to real-world experimental insights, this work provides a comprehensive dataset collected from multiple flight experiments. The dataset includes EKF state estimates, ground-truth measurements, corresponding RIS configurations, and S21 channel data.

0.15

Decision Transformer for UAV-Mounted RIS-Assisted Dynamic D2D Communications

cs.AI cs.RO ·2026-09-09 ·Yaxuan Liu
similarity 0.67
Abstract

This paper studies unmanned aerial vehicle (UAV)-mouted reconfigurable intelligent surface (RIS)-assisted device-to-device (D2D) communication with stochastic link activation. It models UAV motion and attitude, time-varying Rician angles, and angle-dependent RIS reflection. A joint optimization of UAV trajectory, attitude, and RIS phases is formulated to maximize average sum rate under mobility, energy, and hardware constraints. The problem is addressed using deep reinforcement learning and a Decision Transformer trained on expert trajectories from multiple scenarios. Results demonstrate effective cross-scenario generalization, with zero-shot transfer outperforming direct DRL transfer and online fine-tuning achieving competitive performance with fewer interactions.

0.20

Beamforming and Trajectory Optimization for Aerial RIS-Aided Secure ISAC via Model Predictive Control

eess.SP ·2026-10-04 ·Zhendong Li, Zesheng Zhang, Zhou Su, Ziwei Liu, Ying Wang +1 more
similarity 0.67
Abstract

This paper proposes a novel aerial reconfigurable intelligent surface (RIS)-aided secure integrated sensing and communication (ISAC) architecture. An unmanned aerial vehicle (UAV)-mounted RIS establishes virtual line-of-sight links to bypass blockages, serving legitimate users while sensing potential eavesdroppers. To ensure communication security and sensing reliability, we formulate an infinite-horizon dynamic control problem maximizing the long-term average system secrecy rate and minimizing UAV flight energy. This formulation jointly optimizes the UAV trajectory, active beamforming with artificial noise (AN) at the base station, and RIS phase shifts, subject to strict radar signal-to-noise ratio and UAV kinematic constraints. Due to the highly coupled non-convex variables, solving this problem directly is intractable. Therefore, we propose an online joint optimization framework based on model predictive control (MPC). Within each receding horizon, alternating optimization is employed to decouple the problem into three subproblems, efficiently solved via successive convex approximation and difference of convex programming. Extensive simulations demonstrate that our MPC-based algorithm significantly outperforms static baselines in secrecy rate, exhibiting superior online correction capability and robustness against environmental perturbations.

0.17

Lightweight AI for UAV-Mounted RIS: An Overview

cs.NI ·2026-08-26 ·Sherief Hashima, Kohei Hatano, Eiji Takimoto, Mohamed Rihan, Basem. M. Elhalawany +1 more
survey similarity 0.66
Abstract

Unmanned Aerial Vehicles (UAV)-mounted Reconfigurable Intelligent Surfaces (RIS) have emerged as a promising architecture for enhancing wireless coverage, spectral efficiency, and energy performance in 6G networks. By combining programmable electromagnetic wave manipulation with aerial mobility, UAV-RIS systems enable dynamic blockage mitigation, adaptive beamforming, and flexible deployment across terrestrial, maritime, and satellite-integrated environments. However, joint optimization of UAV trajectory, RIS phase configuration, and resource allocation incurs high computational complexity, which is incompatible with the strict energy and onboard processing constraints of UAV platforms. Lightweight AI techniques offer practical solutions to this challenge. Hence, this paper provides a comprehensive overview of lightweight AI techniques for UAV-mounted RIS systems, including Reinforcement Learning (RL), meta-learning, Federated Learning (FL), Multi-Armed Bandits (MAB), and energy-aware optimization. We present a detailed taxonomy and comparative analysis of existing work, highlight computational-energy trade-offs, and identify open research challenges for scalable, energy-efficient airborne intelligent surfaces. Furthermore, we present a case study demonstrating the effect of MAB schemes on throughput and energy efficiency in UAV-mounted RIS.

0.25

Fluid Antennas Enabled UAV Communication Systems: Fundamentals, Challenges, and Future Directions

eess.SP ·2026-10-26 ·Wenchao Liu, Weijie Yuan, Jun Wu, Jinke Ren, Xuhui Zhang +1 more
similarity 0.65
Abstract

Low-altitude wireless networks (LAWNs) require uncrewed aerial vehicle (UAV) communication systems to adapt to large-scale propagation changes and fast local channel fluctuations. Fluid antennas (FAs) provide an additional degree of freedom (DoF) by reconfiguring antenna positions within a compact aperture. This article investigates FA-enabled UAV communication systems from the perspectives of fundamentals, design challenges, and future research directions. We first introduce a dual-mobility perspective, in which UAV trajectory planning provides macro-mobility for large-scale air-to-ground geometry adaptation, and FA position reconfiguration provides micro-mobility for fine-grained local channel adaptation. We then identify key design challenges arising from the high computational complexity and information uncertainty in the joint optimization of UAV trajectory, FA positions, and beamforming under mobility, energy, hardware, and security constraints. To address these challenges, we present a hybrid offline-online optimization framework, where prior information such as environment maps, user mobility patterns, and statistical channel state information (CSI) supports long-term planning, while real-time information such as instantaneous CSI and UAV state enables fast online correction. A case study on FA-enabled UAV-assisted vehicular communications demonstrates the effectiveness of the proposed framework. Finally, we discuss future directions of FA-enabled UAV communication in integrated sensing and communication (ISAC), secure communication, mobile edge computing (MEC), and aerial relaying.

0.14

UAV Rotatable Antenna under Rotation Delay

cs.IT eess.SP ·2026-10-16 ·Yinmei Xie, Chiya Zhang, Chunlong He, Weizheng Zhang, Wei Wang
similarity 0.65
Abstract · 13 pages, 10 figures, 1 table

Rotatable antennas (RAs) can improve wireless link performance by adjusting their boresight directions. However, existing RA studies generally assume instantaneous antenna reconfiguration, whereas mechanical rotation incurs non-negligible delay in practical deployment. To address this issue, we develop a rotation-delay-aware communication model for finite communication slots, where mechanical rotation directly reduces the time available for data transmission. This model reveals a fundamental tradeoff between the communication gain achieved through RA reorientation and the associated transmission-time loss. Accordingly, we formulate a rotation-delay-aware joint design of RA orientations and transmit beamforming to maximize the minimum effective transmission rate. For the single-user system, under a sufficient condition for strict concavity, the global optimum falls into one of three regimes: no rotation, partial rotation, and full rotation. A closed-form approximation is derived using a second-order expansion. For the multi-user system, we separate rotation-budget selection from fixed-budget max-min signal-to-interference-plus-noise ratio (SINR) optimization. An analytic-gradient zero-forcing (AG-ZF) algorithm is then developed for low-complexity joint RA orientation and rotation-budget optimization. The results show that explicitly accounting for mechanical rotation delay is essential for finite-slot RA-enabled UAV communications, and that the proposed designs effectively balance reconfiguration gain and transmission-time loss while achieving favorable effective-rate performance with low computational complexity.

0.50

From Ideal Motion to Flight-Executable Communications: LLM-Evolved Multi-UAV Deployment for Cell-Free Massive MIMO

eess.SP ·2026-09-21 ·Yuyao Wang, Gaoze Mu, Yongan Zheng, Yanzhao Hou, Qingqing Wu +3 more
similarity 0.64
Abstract · 13 pages. 12 figures

Cell-free massive multiple-input multiple-output (CF-mMIMO) is a promising paradigm for future wireless networks, providing user-centric services and cooperative coverage. By using unmanned aerial vehicles (UAVs) as aerial access points, CF-mMIMO networks can exploit UAV mobility to enhance three-dimensional (3D) coverage and spectral efficiency (SE). However, most existing studies on UAV deployment for communication optimization typically assume that UAVs follow ideal point-mass motion (IM), neglecting flight-control constraints and finite-horizon position errors in real flight execution. Consequently, IM-trained deployment policies may degrade severely or become difficult to execute in practice. Motivated by this, we model each UAV as a six-degree-of-freedom quadrotor rigid body with a cascaded flight controller to capture the impact of flight-control-constrained motion (FM) on communication optimization. Based on this model, we formulate a joint UAV 3D deployment and power allocation problem under FM to maximize the downlink average SE in CF-mMIMO networks. To address this problem, we propose LERE, a large language model (LLM)-enhanced multi-agent reinforcement learning (MARL) framework. In LERE, the LLM evolves hybrid rewards with both global and local components via multi-level feedback. The evolved hybrid rewards guide MARL policy optimization and promote multi-UAV cooperation. Experimental results demonstrate that LERE achieves higher SE than reward-design baselines while substantially reducing UAV position errors. Notably, when tested under FM execution, the FM-trained LERE policy achieves a 60.49\% SE gain over its IM-trained counterpart, confirming the necessity of incorporating flight-control constraints into UAV-enabled CF-mMIMO optimization.

0.18

Equivalent-Agent Guidance for Cooperative UAV Payload Transportation

eess.SY ·2026-09-16 ·Saurabh Kumar, Shashi Ranjan Kumar, Abhinav Sinha
similarity 0.62
Abstract

This paper develops a guidance framework for cooperative transportation of a rigid payload by two uncrewed aerial vehicles (UAVs) to stationary and maneuvering landing platforms. A virtual equivalent-agent representation is first introduced to describe the translational motion of the rigidly coupled UAV-payload system, allowing the transportation problem to be formulated in terms of relative range and line-of-sight dynamics with respect to the landing platform. A geometric analysis establishes the terminal feasibility conditions for payload delivery. In particular, an arbitrary prescribed approach angle can be achieved for a stationary platform, whereas successful delivery to a maneuvering platform with zero relative velocity requires terminal velocity and heading angle synchronization and consequently a zero landing angle. Leveraging this framework, a robust fixed-time sliding mode guidance strategy is developed to regulate both relative range and line-of-sight dynamics. A separate link-orientation controller and control allocation scheme is presented to map virtual equivalent agent commands to the individual UAV's control inputs. The proposed strategy guarantees convergence to the desired landing configuration within a uniformly bounded time, independent of initial engagement geometries, while explicitly accommodating uncertainties arising from target maneuvers. Numerical simulations demonstrate accurate delivery under different terminal approach angles and platform maneuvers, while processor-in-the-loop implementation on a Raspberry Pi demonstrates that the guidance algorithm satisfies the real-time computational requirements. Nonetheless, a comparative analysis shows that the proposed framework achieves better tracking accuracy and faster sliding surface convergence while requiring significantly less control energy from each UAV.

0.22