CS Paper Radar

UAV-Mounted Hybrid RIS-Assisted ISAC-RSMA: Performance Analysis with Imperfect CSI and SIC

Chandan Kumar Singh, Arthur Sousa de Sena, Smriti Uniyal, Deepak Kumar, Prabhat K. Upadhyay, Matti Latva-aho

eess.SP cs.ETcs.PFeess.SY ·submitted 2026-10-10 17:10 UTC · v1
publishedtheory

Abstract

In integrated sensing and communication (ISAC) systems, strict sensing requirements can substantially constrain the transmit power available for communication. A hybrid reconfigurable intelligent surface (HRIS) with passive reflection and active amplification capabilities mounted on an unmanned aerial vehicle (UAV) can enhance coverage and strengthen communication links in such power-limited regimes. Meanwhile, rate-splitting multiple access (RSMA) provides an effective transmission strategy for managing inter-user interference, particularly in dense multiuser wireless scenarios. Motivated by this, we analyze the performance of a UAV-mounted HRIS-assisted monostatic ISAC system employing RSMA scheme. We consider the imperfections in the channel state information and successive interference cancellation in the RSMA, which are inevitable in practical system implementations. We then derive highly accurate expressions for outage probability, ergodic rate, and throughput to evaluate communication performance over Nakagami-$m$ fading channels. These expressions reveal key insights into the diversity order and coding gain of the system in the high signal-to-noise ratio regime. To characterize the sensing performance, we derive expressions for the probability of detection, the probability of false alarm, and the Cramér-Rao lower bound. Numerical results validate the theoretical findings and highlight the performance gains of the proposed system over conventional multiple-access schemes and RIS-based systems.

Closest papers

Nearest neighbours by meaning across the whole index.

Secrecy Rate Maximization for UAV-Mounted Six-Dimensional Movable IRS-Assisted ISAC Systems

eess.SP ·2026-08-20 ·Chengye Hong, Botang Shi, Rongkun Zhu, Yuhan Wang, Chenyiming Jiang +1 more
published similarity 0.62
Abstract

Integrated sensing and communication (ISAC) is a key enabling technology for 6G wireless networks, but its broadcast nature raises a physical-layer security concern when the sensing target can act as a potential eavesdropper. Although intelligent reflecting surfaces (IRSs) can enhance wireless propagation and improve secrecy, existing secure IRS-assisted ISAC designs are mostly limited to fixed deployments and passive phase control, which offer limited spatial adaptability in line-of-sight-dominated low-altitude scenarios. To address this limitation, we investigate an unmanned aerial vehicle (UAV)-mounted six-dimensional movable IRS-assisted secure ISAC system, where the IRS location, orientation, and reflection coefficients are jointly optimized with the BS beamformer to maximize the secrecy rate under communication quality-of-service (QoS), power, unit-modulus, and visibility constraints. The resulting problem is highly non-convex due to the coupled active/passive beamforming variables and the location-and-orientation-dependent (pose-dependent) channel responses. To solve it efficiently, we develop a three-block alternating optimization (AO) framework, in which the active beamformer, IRS pose, and passive reflection vector are updated via linearized ADMM, warm-started particle swarm optimization, and Riemannian gradient descent, respectively. Simulation results show that the proposed design significantly outperforms fixed-location and orientation-only baselines, highlighting the importance of joint translation, rotation, and phase control for secure ISAC.

0.20

Geometry-Aware Multi-UAV Full-Duplex Communication: System Design and Experiment

cs.IT ·2026-09-27 ·Tao Yu, Kiyomichi Araki, Tomohiro Mogi, Yasushi Hada, Kei Sakaguchi
published similarity 0.61
Abstract · accepted by IEEE Transactions on Vehicular Technology

The deployment of unmanned aerial vehicle (UAV) systems relies on high-performance yet lightweight wireless links between UAVs and ground stations (GSs). This paper presents a geometry-aware multi-UAV in-band full-duplex (MU-IBFD) communication system that uses high-gain directional antennas and separated uplink/downlink channels to convert self-interference into controllable co-channel interference (CCI) between UAVs, thereby avoiding energy-intensive self-interference cancelers on UAVs. We also derive a geometry-aware CCI model and define a reliable operating region (ROR) in the 3D airspace, within which the SINR requirement is satisfied. A prototype consisting of two UAVs and a GS is developed, and field trials are conducted. The measured CCI as a function of UAV positions agrees well with the theoretically predicted non-ROR region, and the downlink capacity significantly exceeds that of a conventional time-division duplex (TDD) with omni-directional scheme and higher transmit power and approaches that of ideal IBFD in most of the airspace. A proof-of-concept 4K/60p video transmission further demonstrates the practical potential of the proposed MU-IBFD system.

0.34

Unified Analytical Framework for Emergency RIS-UAV Networks Under Practical Impairments

eess.SP ·2026-08-11 ·Yinong Chen, Wenchi Cheng, Jingqing Wang, Jiangzhou Wang
top venuebenchmark similarity 0.61
Abstract

Heterogeneous unmanned aerial vehicle (UAV) networks embedded with reconfigurable intelligent surfaces (RISs) present a promising paradigm for emergency wireless communications (EWC), offering enhanced coverage and resilience in harsh environments. However, extreme conditions in disaster areas necessitate robust performance evaluation under practical impairments, including outdated/imperfect channel state information (CSI) and discrete RIS phase shifts. Existing works lack a unified analytical framework for modeling CSI errors, employing inconsistent approaches that treat errors either as channel gain or as equivalent interference, leading to ambiguous benchmarks. To address this, we propose the $ζ$-Model, a unified receiver-equivalent signal-to-noise (SNR) framework that continuously parameterizes residual-error exploitability via $ζ$. This framework unifies the information-theoretic model (ITM) and the engineering baseline model (EBM) as the optimistic and pessimistic benchmark receiver treatments, while incorporating the simplified engineering model (SEM) as a tractable approximation. By employing the Fisher-Snedecor $\mathcal{F}$ distribution to capture severe fading and shadowing, we derive moment-matching-based closed-form or finite-sum approximate expressions and asymptotic expressions for average capacity (AC), effective capacity (EC), and outage probability (OP) under the proposed unified framework and its boundary cases. Validated by Monte Carlo simulations, our framework quantifies performance limits and provides crucial insights for designing robust and efficient EWC systems under various channel conditions and system impairments.

0.29

Uplink Enhancement for Low-Altitude UAVs via Active RISs Under Existing Cellular Infrastructure

eess.SP ·2026-11-05 ·Weicong Chen, Chao-Kai Wen, Wankai Tang, Yiping Zuo, Xiao Li +1 more
publishedtheory similarity 0.61
Abstract · Minor Revision - IEEE Transactions on Communications

The proliferation of low-altitude aerial Internet of Things applications, such as UAV-based sensing/monitoring, demands high-performance uplinks, yet terrestrial-optimized cellular networks with downtilted base station (BS) antennas form coverage holes that severely degrade aerial uplink. To address this challenge without modifying infrastructure, active reconfigurable intelligent surfaces (RISs) are introduced. Unlike existing studies with complicated active RIS optimizations, we conduct a detailed noise analysis to simplify the transmission design. By deploying one active RIS per BS sector to fully exploit multi-sector reception, we develop a joint sector maximal signal combining scheme that improves signal quality through diversity gain. Active RISs introduce amplifier noise, raising questions about their net benefit. We derive an upper bound on the power ratio between RIS-introduced noise and BS-inherent noise, revealing that the impact of RIS noise is negligible under typical operating conditions. Based on this insight, we maximize a derived lower bound of the received signal-to-noise ratio by sequentially designing the amplitude and phase of reflection coefficients with closed-form expressions. Simulation results validate the theoretical analysis on negligible RIS-introduced noise in typical systems and demonstrate that under the same array gain, a larger RIS size rather than a higher reflection gain is preferred for enhancing the low-altitude uplink transmission.

0.35

Resource Allocation for Secure Dual-UAV-Assisted ISAC System

cs.IT ·2026-08-25 ·Hongjiang Lei, Jianshuo Geng, Ki-Hong Park, Jia Ye, Liang Yang +2 more
similarity 0.61
Abstract · 13 pages,6 figures, submitted to Digital Communications and Networks to review

Integrated sensing and communication (ISAC) is a rising technology in the next wireless communication networks, enabling the simultaneous execution of communication and sensing tasks by fully utilizing limited spectrum resources. In this work, we investigate the secrecy performance of a dual-uncrewed aerial vehicle (UAV)-assisted secure ISAC system. Specifically, a base station UAV communicates with users and transmits radar signals to locate potential eavesdroppers, while simultaneously providing information to a jammer UAV to perform jamming tasks. Considering constraints such as maximum UAV velocity, transmit power, propulsion energy, and sensing thresholds, we maximize the average secrecy rate by optimizing user scheduling strategies, time allocation, transmit power, and UAV trajectories. The presence of a non-convex problem, originating from tightly coupled variables, is tackled by an efficient iterative algorithm. In particular, the original optimization problem is decomposed into six subproblems, and non-convex subproblems are transformed into approximately convex forms via successive convex approximation. Then, block coordinate descent techniques are employed to solve all subproblems sequentially. Numerical results demonstrate the convergence and effectiveness of the proposed algorithm.

0.30

Deep Reinforcement Learning for BD-RIS-Assisted Multi-UAV RSMA Communications

cs.IT cs.ET ·2026-11-02 ·Aamer Mohamed Huroon, Ali A. Nasir, Daniel B. da Costa
published similarity 0.59
Abstract · 6 pages, 5 figures, accepted for presentation at the IEEE GLOBECOM 2026 Workshops

Beyond-diagonal reconfigurable intelligent surfaces (BD-RISs) extend conventional diagonal RISs by allowing controllable coupling among reflecting elements. This flexibility is attractive for aerial networks, where unmanned aerial vehicles (UAVs) face rapidly varying channels and strict power limits. In this paper, we study a hybrid BD-RIS-assisted multi-UAV rate-splitting multiple access (RSMA) downlink, in which UAVs within favourable BD-RIS coverage use both direct and BD-RIS-aided links, whereas the remaining UAVs are served through direct links only. We formulate a network sum-rate maximization problem that jointly optimizes UAV trajectories, RSMA common-rate allocation, beamforming, BD-RIS scattering matrices, and UAV-BD-RIS association. The resulting mixed-integer non-convex problem is solved by using deep deterministic policy gradient (DDPG) algorithm, equipped with a constraint-preserving action layer that generates reciprocal and lossless BD-RIS responses in closed form and handles the binary association inside the environment transition. Simulation results, averaged over three training seeds under a physically consistent channel model with blocked direct links near the BD-RISs, show that the proposed design attains a sum rate comparable to SAC and higher than twin delayed deep deterministic policy gradient ( TD3), proximal policy optimization (PPO), and deep Q-network (DQN), exceeds per-slot alternating optimization with fixed trajectories at about 1/65 of its per-slot runtime, and benefits mainly from RSMA, while the additional BD-RIS gain is modest.

0.31

Optimal Receive Design on the Observation Axis for RSMA Satellite-UAV Downlinks

cs.IT ·2026-10-10 ·Xianwei Meng
theory similarity 0.59
Abstract

A receiver can change its observation state while the physical signal remains the same. In rate-splitting multiple access (RSMA) downlinks, this distinction separates receive-beam design and phase-reference transport from the motion of the satellite--UAV line of sight. We formulate receive optimization within the physical--observation dual-axis (PODA) structure and obtain three complementary results. For a known line-of-sight response and positive-definite receiver-noise covariance, a noise-weighted matched combiner simultaneously maximizes every decoding SINR and the minimum user rate. Under directional uncertainty, the principal eigenvector of the conditional response covariance globally maximizes mean array gain; for a Gaussian directional model, an equal-amplitude receiver is optimized by steering towards the conditional mean. Mean rate requires a different objective. We prove that the RSMA common-rate water level is jointly concave in the users' receive gains and derive a semidefinite relaxation with a computable global upper bound. A feasible rank-one beam can therefore be compared directly with the optimum of the finite-scenario problem. We also derive a precision-weighted linear predictor that suppresses uncertain physical-velocity estimates after observation-frame transport. Paired dynamic simulations reduce direction-cosine RMSE by 51.29\% relative to unrestricted nine-point extrapolation. In a separate uncertainty experiment, direct rate optimization increases mean minimum spectral efficiency from 0.32425 to 0.41712 bit/s/Hz, an improvement of 28.64\%; the corresponding design objective is within $2.28\times10^{-4}$ bit/s/Hz of a global upper bound. The phase-transport equation fixes a coherent representative of each optimal beam without changing its gain.

0.34

ISAC with Co-Prime Arrays: Virtual-Aperture Sensing and uplink downlink communications

cs.IT ·2026-09-02 ·Jing Zhang, Yuxiao Liu, Jiayi Sun, Junliang Ye, Derrick Wing Kwan Ng
benchmark similarity 0.59
Abstract

Integrated sensing and communication (ISAC) enables simultaneous communication and environmental sensing in unmanned aerial vehicle (UAV) networks, but its performance is constrained by the physical antenna aperture and residual self-interference (SI) in full-duplex (FD) sensing. To address these issues, we propose a shared-aperture ISAC architecture in which a sparse co-prime array (CPA) is embedded in a uniform linear array (ULA) grid for FD sensing, while the remaining antenna positions support time-division duplexing (TDD) communication. We characterize the sensing performance through an order-wise Cramer-Rao bound (CRB) analysis, showing that the CPA achieves a stronger asymptotic sensing gain than the partitioned ULA benchmark in both single-target and nondegenerate multi-target scenarios. We further reveal a space-time sampling tradeoff under the same physical aperture. Based on the proposed architecture, we formulate a non-convex joint resource allocation problem that maximizes the weighted downlink-uplink sum rate by jointly designing the sensing transmit covariance, downlink precoder, and uplink receive beamformers under sensing accuracy, BS transmit-power, communication QoS, and residual SI constraints. An alternating-optimization-based algorithm is developed. Simulations demonstrate consistent performance gains over the considered baselines and confirm the complementary benefits of the CPA virtual aperture and sensing covariance optimization.

0.08