CS Paper Radar

Modeling and Performance Analysis for Fluid Antenna System Enabled UAV Near-Field Communications

Hao Jiang, Wangqi Shi, Zhentian Zhang, Xusheng Zhu, Kai-Kit Wong, Hyundung Shin

cs.IT ·submitted 2026-08-10 06:45 UTC · v1

Abstract

Fluid antenna systems (FASs) offer a promising solution for unmanned aerial vehicle (UAV) air-to-ground (A2G) communications by enabling reconfigurable radiation characteristics. Addressing the limitations of traditional models in capturing the dynamic port configuration of FAS and the near-field nature of UAV communications, this paper proposes a dynamic port-reconfigurable near-field channel model for FAS-assisted UAV-to-mobile user (MU) links. Furthermore, we develop a FAS-adaptive subarray partition scheme utilizing a greedy strategy. By decomposing line-of-sight (LoS) and non-line-of-sight (NLoS) components and integrating UAV motion dynamics with FAS port activation states, the proposed model accurately characterizes the non-uniform spatial distribution of near-field channels. The subarray partition scheme dynamically groups active ports to satisfy near-field conditions while significantly reducing computational complexity, supported by a dynamic update algorithm that efficiently handles subarray adjustments during port switching. To avoid low effective gain and deep-fading ports in dense FAS configurations, a channel gain-based selection strategy is employed to prioritize high-gain ports. We derive and analyze the modeling accuracy and channel capacity, investigating the impact of FAS dimensions, port spacing, active port count, and UAV dynamics on system performance. Finally, the computational complexity of the subarray partition scheme is evaluated, verifying its advantages for real-time applications and providing a theoretical foundation for the design and analysis of FAS in dynamic scenarios.

Closest papers

Nearest neighbours by meaning across the whole index.

Fluid Antennas Enabled UAV Communication Systems: Fundamentals, Challenges, and Future Directions

eess.SP ·2026-10-26 ·Wenchao Liu, Weijie Yuan, Jun Wu, Jinke Ren, Xuhui Zhang +1 more
similarity 0.71
Abstract

Low-altitude wireless networks (LAWNs) require uncrewed aerial vehicle (UAV) communication systems to adapt to large-scale propagation changes and fast local channel fluctuations. Fluid antennas (FAs) provide an additional degree of freedom (DoF) by reconfiguring antenna positions within a compact aperture. This article investigates FA-enabled UAV communication systems from the perspectives of fundamentals, design challenges, and future research directions. We first introduce a dual-mobility perspective, in which UAV trajectory planning provides macro-mobility for large-scale air-to-ground geometry adaptation, and FA position reconfiguration provides micro-mobility for fine-grained local channel adaptation. We then identify key design challenges arising from the high computational complexity and information uncertainty in the joint optimization of UAV trajectory, FA positions, and beamforming under mobility, energy, hardware, and security constraints. To address these challenges, we present a hybrid offline-online optimization framework, where prior information such as environment maps, user mobility patterns, and statistical channel state information (CSI) supports long-term planning, while real-time information such as instantaneous CSI and UAV state enables fast online correction. A case study on FA-enabled UAV-assisted vehicular communications demonstrates the effectiveness of the proposed framework. Finally, we discuss future directions of FA-enabled UAV communication in integrated sensing and communication (ISAC), secure communication, mobile edge computing (MEC), and aerial relaying.

0.14

Fluid Antenna Array-Inspired Location-Posterior-Driven Subarray Sizing and Power Control for Two-Hop AF UAV Relaying

cs.IT ·2026-08-17 ·Xuanyi Zhu, Jian Dang, Chen Zhao, Huaifeng Shi, Zaichen Zhang
similarity 0.66
Abstract · 6 pages, 5 figures

This paper develops fluid antenna array (FAA)-inspired subarray sizing and transmit-power design for a two-hop amplify-and-forward (AF) unmanned aerial vehicle (UAV) relay using progressively contracting user-location posteriors. A contiguous reconfigurable subarray is shared by first-hop reception and second-hop forwarding, such that its active size jointly determines the receive gain, forwarding gain, and beamwidth. By adaptively controlling the effective aperture, the proposed design exploits geometric reconfigurability to balance array gain against pointing robustness under location uncertainty. Projecting the position covariance onto the array direction yields a closed-form direction-limited size inversely proportional to directional uncertainty. Posterior samples are propagated through the two-hop rate model, and the subarray size and transmit power are then selected to minimize UAV power subject to a worst-user lower-tail rate requirement and hardware power limits. The planned configuration is further audited over instantaneous two-hop Rician channels at the true user positions. At t = 8 s, the proposed design saves 3.17 dB over full-array narrow-beam transmission on paired feasible geometries and achieves 60.0% service success at a 0.15-W budget, compared with 43.2% for a fixed eight-element subarray.

0.14

Fluid Antenna Array-Enabled Near-Field ISAC: Joint Port Position Optimization and Transmit Beamforming Design

cs.IT ·2026-11-02 ·Wangqi Shi, Zhentian Zhang, Hao Jiang, Zaichen Zhang, Kin-Fai Tong
similarity 0.63
Abstract

Fluid antenna systems (FASs) have shown that activating a single port from a densely packed antenna array can yield spatial diversity comparable to that of tens of independent antennas, a property that has substantially improved communication reliability and efficiency. The fluid antenna array (FAA) extends this concept to multi-port configurations while avoiding complex multi-dimensional spatial correlation, and offers significant geometrical flexibility under a finite aperture and a limited port budget. These attributes motivate environment-adaptive array geometry for sensing in integrated sensing and communication (ISAC) systems. Although this flexibility enables adaptive array geometries that exploit near-field distance-angle information, improving multi-parameter target estimation under communication and deployment constraints remains challenging. In this paper, we propose a planar FAA-assisted near-field ISAC framework for multiuser communication and target sensing. Specifically, we derive the Fisher information matrix (FIM) and the corresponding Cramér-Rao bound (CRB) for the joint estimation of target range, zenith angle, azimuth angle, and radial velocity. Based on the derived CRB, we jointly optimize the FAA port positions and transmit beamforming to improve sensing accuracy while satisfying communication signal-to-interference-plus-noise ratio (SINR), transmit power, and physical deployment constraints. To solve the resulting non-convex problem, we develop a two-stage alternating optimization algorithm, in which transmit beamforming is optimized through semidefinite relaxation (SDR), while FAA port positions are successively optimized through discrete search and continuous refinement. Simulation results indicate that the proposed algorithm achieves favorable sensing performance while maintaining a reasonable computational cost.

0.16

Low-Complexity Multi-User Non-Line-of-Sight Channel Estimation

eess.SP ·2026-09-24 ·Mohammad Abu Aqoulah, Doğa Gürgünoğlu, Gábor Fodor, Gonzalo Seco-Granados
published similarity 0.61
Abstract · 6 pages, 5 figures. Accepted to IEEE CSCN 2026

Future radio access networks are expected to rely on large-aperture antenna arrays, for which an increasing portion of the coverage region may fall within the radiative near-field. In this regime, conventional far-field models become inaccurate, and the received spatial signature depends jointly on the propagation range and azimuth, making reliable uplink channel acquisition a key physical-layer challenge. Many existing near-field estimation works rely on simplified line-of-sight-dominant or single-path channel models, which fail to capture practical non-line-of-sight (NLoS) multipath environments. In contrast to prior single-path near-field partial relaxation (PR) formulations, in this paper, we develop a PR-based framework for near-field NLoS uplink channel estimation by modeling each user channel as a superposition of multiple spherical-wave components characterized by their ranges and azimuths. For the known-pilot case, we develop a greedy PR-based maximum likelihood estimator that iteratively extracts dominant propagation paths while mitigating multi-user interference. For the unknown-symbol case, we propose a PR-based rank-adaptive covariance-fitting approach that captures the multipath structure. We further derive the corresponding Cramér-Rao bounds for both cases. Numerical results show that the proposed multipath PR-based methods achieve strong estimation performance, remain close to the corresponding bounds, and outperform near-field two-dimensional multiple signal classification across the considered scenarios, supporting their relevance for future large-aperture uplink systems.

0.31

Orientation-Aware Control and Trajectory Design for Aerial RIS-Assisted Wireless Communications

cs.NI cs.RO ·2026-09-19 ·Abdoul Karim A. H. Saliah, Hajar El Hammouti, Daniel Bonilla Licea, Giuseppe Silano
published similarity 0.60
Abstract · Accepted for publication in IEEE Transactions on Vehicular Technology. Copyright (c) 20xx IEEE. Personal use of this material is permitted. …

Aerial Reconfigurable Intelligent Surfaces (ARISs) can enhance wireless connectivity in obstructed environments by combining reconfigurable metasurfaces with aerial mobility. However, in practical deployments, the Reconfigurable Intelligent Surface (RIS) is rigidly mounted on a multi-rotor Unmanned Aerial Vehicle (UAV), which creates coupled position-orientation dynamics that directly affect communication quality. Since RIS performance is highly sensitive to orientation, point-mass or orientation-invariant models may lead to optimistic performance estimates. This paper proposes an orientation-aware ARIS framework that explicitly accounts for UAV dynamics, actuation limits, and orientation-dependent channels. The proposed approach combines a communications-guided reference trajectory planner with a Nonlinear Model Predictive Control for dynamically feasible trajectory tracking and favorable RIS orientation, while employing lightweight beamforming and RIS phase-shift updates. Simulations show that accounting for orientation improves user throughput by 13.77%, while the proposed joint communication updates improve network throughput by 28% over phase-shift-only optimization and by at least a factor of 2.5 over beamforming-only optimization. These results highlight the importance of orientation-aware modeling and joint communication-control design in ARIS-assisted wireless systems.

0.25

LIVE-RIS: A Comprehensive In-Flight Dataset for UAV-Mounted RIS Channel Measurements

eess.SP eess.SY ·2026-09-28 ·David Müller, Kevin Weinberger, Aydin Sezgin, Martin Mönnigmann
similarity 0.60
Abstract · 6 pages, 5 figures, Submitted to ICC2027

The dynamic control of the wireless propagation environment enabled by reconfigurable intelligent surfaces (RISs) makes them a promising technology for sixth-generation (6G) wireless networks. Beyond conventional fixed-position deployments, integrating a RIS with an unmanned aerial vehicle (UAV) provides additional spatial flexibility, facilitating favorable Line-of-Sight (LoS) conditions and broadening the range of potential applications. Although UAV-mounted RIS systems have attracted significant research interest, existing studies rely predominantly on numerical simulations and often overlook the impact of practical constraints and real-world disturbances. To address this gap, the authors recently presented the first UAV-mounted RIS prototype and experimentally validated its feasibility through real-world experiments. By using the UAV's extended Kalman Filter (EKF) for real-time RIS reconfiguration, the proposed system effectively mitigates disturbance effects and preserves the performance gains of the RIS-enabled link. To further advance UAV-mounted RIS research and facilitate broader access to real-world experimental insights, this work provides a comprehensive dataset collected from multiple flight experiments. The dataset includes EKF state estimates, ground-truth measurements, corresponding RIS configurations, and S21 channel data.

0.15

Lightweight AI for UAV-Mounted RIS: An Overview

cs.NI ·2026-08-26 ·Sherief Hashima, Kohei Hatano, Eiji Takimoto, Mohamed Rihan, Basem. M. Elhalawany +1 more
survey similarity 0.59
Abstract

Unmanned Aerial Vehicles (UAV)-mounted Reconfigurable Intelligent Surfaces (RIS) have emerged as a promising architecture for enhancing wireless coverage, spectral efficiency, and energy performance in 6G networks. By combining programmable electromagnetic wave manipulation with aerial mobility, UAV-RIS systems enable dynamic blockage mitigation, adaptive beamforming, and flexible deployment across terrestrial, maritime, and satellite-integrated environments. However, joint optimization of UAV trajectory, RIS phase configuration, and resource allocation incurs high computational complexity, which is incompatible with the strict energy and onboard processing constraints of UAV platforms. Lightweight AI techniques offer practical solutions to this challenge. Hence, this paper provides a comprehensive overview of lightweight AI techniques for UAV-mounted RIS systems, including Reinforcement Learning (RL), meta-learning, Federated Learning (FL), Multi-Armed Bandits (MAB), and energy-aware optimization. We present a detailed taxonomy and comparative analysis of existing work, highlight computational-energy trade-offs, and identify open research challenges for scalable, energy-efficient airborne intelligent surfaces. Furthermore, we present a case study demonstrating the effect of MAB schemes on throughput and energy efficiency in UAV-mounted RIS.

0.25

Statistical Channel Model for FSO Systems Assisted by a UAV-Mounted IRS

eess.SP ·2026-08-11 ·Ferdaous Tarhouni, Vasilis K. Papanikolaou, Laura Cottatellucci, Mohammad-Ali Khalighi, Robert Schober
similarity 0.58
Abstract · 13 pages, 3 figures, conference

Integrating optical intelligent reflecting surfaces (IRSs) into aerial platforms, such as unmanned aerial vehicles (UAVs), has been proposed to relax the line-of-sight (LoS) constraint, extend coverage, and enhance deployment flexibility of free space optical (FSO) systems. However, misalignment errors induced by the UAV hovering, in both position and orientation, may degrade connectivity and impair the end-to-end channel quality. In this paper, we develop novel expressions for the electric fields incident on and reflected by an optical IRS, based on the Huygens-Fresnel principle. The resulting expressions are applicable for any combination of incident and reflected propagation directions. Building on this framework, we derive a closed-form statistical channel model that captures the geometric and misalignment losses of an FSO link assisted by a UAV-mounted IRS in the presence of random UAV fluctuations. In particular, we develop a statistical model for the beam misalignment at the receiver lens, assuming Gaussian fluctuations in both the UAV position and orientation. The proposed analytical model is validated through Monte Carlo (MC) simulations and is further used to provide practical design guidelines regarding the optimal placement of the UAV-mounted IRS for the minimization of the outage probability.

0.10