CS Paper Radar

Fluid Antenna Array-Inspired Location-Posterior-Driven Subarray Sizing and Power Control for Two-Hop AF UAV Relaying

Xuanyi Zhu, Jian Dang, Chen Zhao, Huaifeng Shi, Zaichen Zhang

cs.IT ·submitted 2026-08-17 16:18 UTC · v1

Abstract

This paper develops fluid antenna array (FAA)-inspired subarray sizing and transmit-power design for a two-hop amplify-and-forward (AF) unmanned aerial vehicle (UAV) relay using progressively contracting user-location posteriors. A contiguous reconfigurable subarray is shared by first-hop reception and second-hop forwarding, such that its active size jointly determines the receive gain, forwarding gain, and beamwidth. By adaptively controlling the effective aperture, the proposed design exploits geometric reconfigurability to balance array gain against pointing robustness under location uncertainty. Projecting the position covariance onto the array direction yields a closed-form direction-limited size inversely proportional to directional uncertainty. Posterior samples are propagated through the two-hop rate model, and the subarray size and transmit power are then selected to minimize UAV power subject to a worst-user lower-tail rate requirement and hardware power limits. The planned configuration is further audited over instantaneous two-hop Rician channels at the true user positions. At t = 8 s, the proposed design saves 3.17 dB over full-array narrow-beam transmission on paired feasible geometries and achieves 60.0% service success at a 0.15-W budget, compared with 43.2% for a fixed eight-element subarray.

Comment
6 pages, 5 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Modeling and Performance Analysis for Fluid Antenna System Enabled UAV Near-Field Communications

cs.IT ·2026-08-10 ·Hao Jiang, Wangqi Shi, Zhentian Zhang, Xusheng Zhu, Kai-Kit Wong +1 more
similarity 0.66
Abstract

Fluid antenna systems (FASs) offer a promising solution for unmanned aerial vehicle (UAV) air-to-ground (A2G) communications by enabling reconfigurable radiation characteristics. Addressing the limitations of traditional models in capturing the dynamic port configuration of FAS and the near-field nature of UAV communications, this paper proposes a dynamic port-reconfigurable near-field channel model for FAS-assisted UAV-to-mobile user (MU) links. Furthermore, we develop a FAS-adaptive subarray partition scheme utilizing a greedy strategy. By decomposing line-of-sight (LoS) and non-line-of-sight (NLoS) components and integrating UAV motion dynamics with FAS port activation states, the proposed model accurately characterizes the non-uniform spatial distribution of near-field channels. The subarray partition scheme dynamically groups active ports to satisfy near-field conditions while significantly reducing computational complexity, supported by a dynamic update algorithm that efficiently handles subarray adjustments during port switching. To avoid low effective gain and deep-fading ports in dense FAS configurations, a channel gain-based selection strategy is employed to prioritize high-gain ports. We derive and analyze the modeling accuracy and channel capacity, investigating the impact of FAS dimensions, port spacing, active port count, and UAV dynamics on system performance. Finally, the computational complexity of the subarray partition scheme is evaluated, verifying its advantages for real-time applications and providing a theoretical foundation for the design and analysis of FAS in dynamic scenarios.

0.32

Fluid Antennas Enabled UAV Communication Systems: Fundamentals, Challenges, and Future Directions

eess.SP ·2026-10-26 ·Wenchao Liu, Weijie Yuan, Jun Wu, Jinke Ren, Xuhui Zhang +1 more
similarity 0.64
Abstract

Low-altitude wireless networks (LAWNs) require uncrewed aerial vehicle (UAV) communication systems to adapt to large-scale propagation changes and fast local channel fluctuations. Fluid antennas (FAs) provide an additional degree of freedom (DoF) by reconfiguring antenna positions within a compact aperture. This article investigates FA-enabled UAV communication systems from the perspectives of fundamentals, design challenges, and future research directions. We first introduce a dual-mobility perspective, in which UAV trajectory planning provides macro-mobility for large-scale air-to-ground geometry adaptation, and FA position reconfiguration provides micro-mobility for fine-grained local channel adaptation. We then identify key design challenges arising from the high computational complexity and information uncertainty in the joint optimization of UAV trajectory, FA positions, and beamforming under mobility, energy, hardware, and security constraints. To address these challenges, we present a hybrid offline-online optimization framework, where prior information such as environment maps, user mobility patterns, and statistical channel state information (CSI) supports long-term planning, while real-time information such as instantaneous CSI and UAV state enables fast online correction. A case study on FA-enabled UAV-assisted vehicular communications demonstrates the effectiveness of the proposed framework. Finally, we discuss future directions of FA-enabled UAV communication in integrated sensing and communication (ISAC), secure communication, mobile edge computing (MEC), and aerial relaying.

0.14

Fluid Antenna Array-Enabled Near-Field ISAC: Joint Port Position Optimization and Transmit Beamforming Design

cs.IT ·2026-11-02 ·Wangqi Shi, Zhentian Zhang, Hao Jiang, Zaichen Zhang, Kin-Fai Tong
similarity 0.60
Abstract

Fluid antenna systems (FASs) have shown that activating a single port from a densely packed antenna array can yield spatial diversity comparable to that of tens of independent antennas, a property that has substantially improved communication reliability and efficiency. The fluid antenna array (FAA) extends this concept to multi-port configurations while avoiding complex multi-dimensional spatial correlation, and offers significant geometrical flexibility under a finite aperture and a limited port budget. These attributes motivate environment-adaptive array geometry for sensing in integrated sensing and communication (ISAC) systems. Although this flexibility enables adaptive array geometries that exploit near-field distance-angle information, improving multi-parameter target estimation under communication and deployment constraints remains challenging. In this paper, we propose a planar FAA-assisted near-field ISAC framework for multiuser communication and target sensing. Specifically, we derive the Fisher information matrix (FIM) and the corresponding Cramér-Rao bound (CRB) for the joint estimation of target range, zenith angle, azimuth angle, and radial velocity. Based on the derived CRB, we jointly optimize the FAA port positions and transmit beamforming to improve sensing accuracy while satisfying communication signal-to-interference-plus-noise ratio (SINR), transmit power, and physical deployment constraints. To solve the resulting non-convex problem, we develop a two-stage alternating optimization algorithm, in which transmit beamforming is optimized through semidefinite relaxation (SDR), while FAA port positions are successively optimized through discrete search and continuous refinement. Simulation results indicate that the proposed algorithm achieves favorable sensing performance while maintaining a reasonable computational cost.

0.16

Orientation-Aware Control and Trajectory Design for Aerial RIS-Assisted Wireless Communications

cs.NI cs.RO ·2026-09-19 ·Abdoul Karim A. H. Saliah, Hajar El Hammouti, Daniel Bonilla Licea, Giuseppe Silano
published similarity 0.59
Abstract · Accepted for publication in IEEE Transactions on Vehicular Technology. Copyright (c) 20xx IEEE. Personal use of this material is permitted. …

Aerial Reconfigurable Intelligent Surfaces (ARISs) can enhance wireless connectivity in obstructed environments by combining reconfigurable metasurfaces with aerial mobility. However, in practical deployments, the Reconfigurable Intelligent Surface (RIS) is rigidly mounted on a multi-rotor Unmanned Aerial Vehicle (UAV), which creates coupled position-orientation dynamics that directly affect communication quality. Since RIS performance is highly sensitive to orientation, point-mass or orientation-invariant models may lead to optimistic performance estimates. This paper proposes an orientation-aware ARIS framework that explicitly accounts for UAV dynamics, actuation limits, and orientation-dependent channels. The proposed approach combines a communications-guided reference trajectory planner with a Nonlinear Model Predictive Control for dynamically feasible trajectory tracking and favorable RIS orientation, while employing lightweight beamforming and RIS phase-shift updates. Simulations show that accounting for orientation improves user throughput by 13.77%, while the proposed joint communication updates improve network throughput by 28% over phase-shift-only optimization and by at least a factor of 2.5 over beamforming-only optimization. These results highlight the importance of orientation-aware modeling and joint communication-control design in ARIS-assisted wireless systems.

0.25

From Ideal Motion to Flight-Executable Communications: LLM-Evolved Multi-UAV Deployment for Cell-Free Massive MIMO

eess.SP ·2026-09-21 ·Yuyao Wang, Gaoze Mu, Yongan Zheng, Yanzhao Hou, Qingqing Wu +3 more
similarity 0.59
Abstract · 13 pages. 12 figures

Cell-free massive multiple-input multiple-output (CF-mMIMO) is a promising paradigm for future wireless networks, providing user-centric services and cooperative coverage. By using unmanned aerial vehicles (UAVs) as aerial access points, CF-mMIMO networks can exploit UAV mobility to enhance three-dimensional (3D) coverage and spectral efficiency (SE). However, most existing studies on UAV deployment for communication optimization typically assume that UAVs follow ideal point-mass motion (IM), neglecting flight-control constraints and finite-horizon position errors in real flight execution. Consequently, IM-trained deployment policies may degrade severely or become difficult to execute in practice. Motivated by this, we model each UAV as a six-degree-of-freedom quadrotor rigid body with a cascaded flight controller to capture the impact of flight-control-constrained motion (FM) on communication optimization. Based on this model, we formulate a joint UAV 3D deployment and power allocation problem under FM to maximize the downlink average SE in CF-mMIMO networks. To address this problem, we propose LERE, a large language model (LLM)-enhanced multi-agent reinforcement learning (MARL) framework. In LERE, the LLM evolves hybrid rewards with both global and local components via multi-level feedback. The evolved hybrid rewards guide MARL policy optimization and promote multi-UAV cooperation. Experimental results demonstrate that LERE achieves higher SE than reward-design baselines while substantially reducing UAV position errors. Notably, when tested under FM execution, the FM-trained LERE policy achieves a 60.49\% SE gain over its IM-trained counterpart, confirming the necessity of incorporating flight-control constraints into UAV-enabled CF-mMIMO optimization.

0.18

Optimal Receive Design on the Observation Axis for RSMA Satellite-UAV Downlinks

cs.IT ·2026-10-10 ·Xianwei Meng
theory similarity 0.57
Abstract

A receiver can change its observation state while the physical signal remains the same. In rate-splitting multiple access (RSMA) downlinks, this distinction separates receive-beam design and phase-reference transport from the motion of the satellite--UAV line of sight. We formulate receive optimization within the physical--observation dual-axis (PODA) structure and obtain three complementary results. For a known line-of-sight response and positive-definite receiver-noise covariance, a noise-weighted matched combiner simultaneously maximizes every decoding SINR and the minimum user rate. Under directional uncertainty, the principal eigenvector of the conditional response covariance globally maximizes mean array gain; for a Gaussian directional model, an equal-amplitude receiver is optimized by steering towards the conditional mean. Mean rate requires a different objective. We prove that the RSMA common-rate water level is jointly concave in the users' receive gains and derive a semidefinite relaxation with a computable global upper bound. A feasible rank-one beam can therefore be compared directly with the optimum of the finite-scenario problem. We also derive a precision-weighted linear predictor that suppresses uncertain physical-velocity estimates after observation-frame transport. Paired dynamic simulations reduce direction-cosine RMSE by 51.29\% relative to unrestricted nine-point extrapolation. In a separate uncertainty experiment, direct rate optimization increases mean minimum spectral efficiency from 0.32425 to 0.41712 bit/s/Hz, an improvement of 28.64\%; the corresponding design objective is within $2.28\times10^{-4}$ bit/s/Hz of a global upper bound. The phase-transport equation fixes a coherent representative of each optimal beam without changing its gain.

0.34

UAV-Mounted Hybrid RIS-Assisted ISAC-RSMA: Performance Analysis with Imperfect CSI and SIC

eess.SP cs.ETcs.PFeess.SY ·2026-10-10 ·Chandan Kumar Singh, Arthur Sousa de Sena, Smriti Uniyal, Deepak Kumar, Prabhat K. Upadhyay +1 more
publishedtheory similarity 0.56
Abstract

In integrated sensing and communication (ISAC) systems, strict sensing requirements can substantially constrain the transmit power available for communication. A hybrid reconfigurable intelligent surface (HRIS) with passive reflection and active amplification capabilities mounted on an unmanned aerial vehicle (UAV) can enhance coverage and strengthen communication links in such power-limited regimes. Meanwhile, rate-splitting multiple access (RSMA) provides an effective transmission strategy for managing inter-user interference, particularly in dense multiuser wireless scenarios. Motivated by this, we analyze the performance of a UAV-mounted HRIS-assisted monostatic ISAC system employing RSMA scheme. We consider the imperfections in the channel state information and successive interference cancellation in the RSMA, which are inevitable in practical system implementations. We then derive highly accurate expressions for outage probability, ergodic rate, and throughput to evaluate communication performance over Nakagami-$m$ fading channels. These expressions reveal key insights into the diversity order and coding gain of the system in the high signal-to-noise ratio regime. To characterize the sensing performance, we derive expressions for the probability of detection, the probability of false alarm, and the Cramér-Rao lower bound. Numerical results validate the theoretical findings and highlight the performance gains of the proposed system over conventional multiple-access schemes and RIS-based systems.

0.39

UAV Rotatable Antenna under Rotation Delay

cs.IT eess.SP ·2026-10-16 ·Yinmei Xie, Chiya Zhang, Chunlong He, Weizheng Zhang, Wei Wang
similarity 0.56
Abstract · 13 pages, 10 figures, 1 table

Rotatable antennas (RAs) can improve wireless link performance by adjusting their boresight directions. However, existing RA studies generally assume instantaneous antenna reconfiguration, whereas mechanical rotation incurs non-negligible delay in practical deployment. To address this issue, we develop a rotation-delay-aware communication model for finite communication slots, where mechanical rotation directly reduces the time available for data transmission. This model reveals a fundamental tradeoff between the communication gain achieved through RA reorientation and the associated transmission-time loss. Accordingly, we formulate a rotation-delay-aware joint design of RA orientations and transmit beamforming to maximize the minimum effective transmission rate. For the single-user system, under a sufficient condition for strict concavity, the global optimum falls into one of three regimes: no rotation, partial rotation, and full rotation. A closed-form approximation is derived using a second-order expansion. For the multi-user system, we separate rotation-budget selection from fixed-budget max-min signal-to-interference-plus-noise ratio (SINR) optimization. An analytic-gradient zero-forcing (AG-ZF) algorithm is then developed for low-complexity joint RA orientation and rotation-budget optimization. The results show that explicitly accounting for mechanical rotation delay is essential for finite-slot RA-enabled UAV communications, and that the proposed designs effectively balance reconfiguration gain and transmission-time loss while achieving favorable effective-rate performance with low computational complexity.

0.50