CS Paper Radar

Statistical Channel Model for FSO Systems Assisted by a UAV-Mounted IRS

Ferdaous Tarhouni, Vasilis K. Papanikolaou, Laura Cottatellucci, Mohammad-Ali Khalighi, Robert Schober

eess.SP ·submitted 2026-08-11 07:45 UTC · v1

Abstract

Integrating optical intelligent reflecting surfaces (IRSs) into aerial platforms, such as unmanned aerial vehicles (UAVs), has been proposed to relax the line-of-sight (LoS) constraint, extend coverage, and enhance deployment flexibility of free space optical (FSO) systems. However, misalignment errors induced by the UAV hovering, in both position and orientation, may degrade connectivity and impair the end-to-end channel quality. In this paper, we develop novel expressions for the electric fields incident on and reflected by an optical IRS, based on the Huygens-Fresnel principle. The resulting expressions are applicable for any combination of incident and reflected propagation directions. Building on this framework, we derive a closed-form statistical channel model that captures the geometric and misalignment losses of an FSO link assisted by a UAV-mounted IRS in the presence of random UAV fluctuations. In particular, we develop a statistical model for the beam misalignment at the receiver lens, assuming Gaussian fluctuations in both the UAV position and orientation. The proposed analytical model is validated through Monte Carlo (MC) simulations and is further used to provide practical design guidelines regarding the optimal placement of the UAV-mounted IRS for the minimization of the outage probability.

Comment
13 pages, 3 figures, conference

Closest papers

Nearest neighbours by meaning across the whole index.

Communication and Sensing Coverage of UAV Corridor under Beam Misalignment Error

cs.IT ·2026-10-01 ·Harris K. Armeniakos, Petros S. Bithas, Konstantinos Maliatsos, Christos Masouros, Athanasios G. Kanatas
published similarity 0.62
Abstract · Accepted for presentation in IEEE ISAC 2026

In this paper, a unmanned aerial vehicle (UAV) corridor-assisted network is proposed to study the joint sensing and communication (JCAS) coverage probability (CP) of a terrestrial (BS) equipped with a realistic three-dimensional (3D) 3GPP antenna pattern. By employing the 3D binomial point process (BPP) to model the spatial locations of the UAV-UEs, a fixed number of UAV-UEs are deployed in an aerial corridor modeled as a finite cylinder. The BS exploits radar sensing capabilities to track a known UAV-UE under a 3D beam misalignment error, which follows a multivariate normal distribution. Subsequently, under clutter and uplink communication interference, exact- form analytical expressions for JCAS CP are derived and used to analyze the performance at the terrestrial BS. The results highlight corridor-length saturation at high UAV heights and the beamwidth trade-off between interference suppression and misalignment sensitivity.

0.34

Analytical Channel Modeling and Stability Aware Optimization of Optical Inter Satellite Links

cs.IT physics.optics ·2026-09-15 ·Hossein Safi, Ziheng Wang, Stijn Mast, Harald Haas, Iman Tavakkolnia
top venue similarity 0.59
Abstract

Optical inter-satellite links (OISLs) are key enablers for high-capacity space networks and next-generation satellite constellations. However, their extreme directionality makes link reliability highly sensitive to platform-induced pointing jitter, which causes random misalignment between the transmitter and receiver beams. In this paper, we develop a tractable closed-form statistical channel model for point-to-point OISLs subject to independent pointing errors at both terminals. Accurate Gaussian main-lobe approximations are applied to the transmitter far-field pattern and receiver coupling efficiency. This transforms the diffraction-based channel response into closed-form expressions for the channel-gain distribution, outage probability, and ergodic capacity. The analytical results are validated through Monte Carlo simulations and used to study the impact of terminal stability, beam divergence, and link margin on OISL performance. The results show that outage probability is governed by the weaker terminal in terms of pointing stability, while improving only the stronger terminal provides minimal additional benefit. In contrast, the ergodic-capacity penalty depends on the combined stability of both terminals, revealing a fundamental distinction between reliability and throughput metrics. The proposed framework provides practical design guidelines for selecting beam parameters and specifying pointing and tracking requirements under varying levels of platform instability.

0.30

LIVE-RIS: A Comprehensive In-Flight Dataset for UAV-Mounted RIS Channel Measurements

eess.SP eess.SY ·2026-09-28 ·David Müller, Kevin Weinberger, Aydin Sezgin, Martin Mönnigmann
similarity 0.58
Abstract · 6 pages, 5 figures, Submitted to ICC2027

The dynamic control of the wireless propagation environment enabled by reconfigurable intelligent surfaces (RISs) makes them a promising technology for sixth-generation (6G) wireless networks. Beyond conventional fixed-position deployments, integrating a RIS with an unmanned aerial vehicle (UAV) provides additional spatial flexibility, facilitating favorable Line-of-Sight (LoS) conditions and broadening the range of potential applications. Although UAV-mounted RIS systems have attracted significant research interest, existing studies rely predominantly on numerical simulations and often overlook the impact of practical constraints and real-world disturbances. To address this gap, the authors recently presented the first UAV-mounted RIS prototype and experimentally validated its feasibility through real-world experiments. By using the UAV's extended Kalman Filter (EKF) for real-time RIS reconfiguration, the proposed system effectively mitigates disturbance effects and preserves the performance gains of the RIS-enabled link. To further advance UAV-mounted RIS research and facilitate broader access to real-world experimental insights, this work provides a comprehensive dataset collected from multiple flight experiments. The dataset includes EKF state estimates, ground-truth measurements, corresponding RIS configurations, and S21 channel data.

0.15

Modeling and Performance Analysis for Fluid Antenna System Enabled UAV Near-Field Communications

cs.IT ·2026-08-10 ·Hao Jiang, Wangqi Shi, Zhentian Zhang, Xusheng Zhu, Kai-Kit Wong +1 more
similarity 0.58
Abstract

Fluid antenna systems (FASs) offer a promising solution for unmanned aerial vehicle (UAV) air-to-ground (A2G) communications by enabling reconfigurable radiation characteristics. Addressing the limitations of traditional models in capturing the dynamic port configuration of FAS and the near-field nature of UAV communications, this paper proposes a dynamic port-reconfigurable near-field channel model for FAS-assisted UAV-to-mobile user (MU) links. Furthermore, we develop a FAS-adaptive subarray partition scheme utilizing a greedy strategy. By decomposing line-of-sight (LoS) and non-line-of-sight (NLoS) components and integrating UAV motion dynamics with FAS port activation states, the proposed model accurately characterizes the non-uniform spatial distribution of near-field channels. The subarray partition scheme dynamically groups active ports to satisfy near-field conditions while significantly reducing computational complexity, supported by a dynamic update algorithm that efficiently handles subarray adjustments during port switching. To avoid low effective gain and deep-fading ports in dense FAS configurations, a channel gain-based selection strategy is employed to prioritize high-gain ports. We derive and analyze the modeling accuracy and channel capacity, investigating the impact of FAS dimensions, port spacing, active port count, and UAV dynamics on system performance. Finally, the computational complexity of the subarray partition scheme is evaluated, verifying its advantages for real-time applications and providing a theoretical foundation for the design and analysis of FAS in dynamic scenarios.

0.32

Intelligent Reflecting Surface Deployment for Low-Altitude Coverage: Illumination Geometry, Directional Characteristics, and Optimization

cs.IT ·2026-08-31 ·Guoying Zhang, Qingqing Wu, Ailing Zheng, Xingxiang Peng, Wen Chen +1 more
theory similarity 0.57
Abstract · Submitted to an IEEE journal for possible publication

Terrestrial base stations (BSs) are typically configured with fixed downtilt to serve ground users, resulting in weak illumination of low-altitude airspace even under line-of-sight (LoS) propagation. In this paper, we establish a channel model that incorporates BS and intelligent reflecting surface (IRS) radiation patterns for three-dimensional (3D) low-altitude coverage while preserving the existing BS configuration. We formulate a budget-constrained IRS deployment problem that jointly determines candidate-site selection, IRS orientations, and phase shifts to maximize the worst-case signal-to-noise ratio (SNR) over the 3D low-altitude airspace. The selected sites and optimized IRS parameters remain fixed after deployment, yielding a quasi-static IRS configuration. We characterize the illumination geometry between the fixed-downtilt BS and rooftop candidates by deriving the nonnegative installation-height range satisfying the BS main-lobe condition. The separation between the mapped main-lobe height boundaries grows linearly with horizontal BS-to-site distance and decreases inversely with the number of BS antennas. We further derive an analytical lower bound on the regional worst-case normalized array gain achievable through IRS phase design over served directions with different direction spans. The resulting sufficient direction span decreases inversely with the square root of the number of IRS elements when the same worst-case normalized gain guarantee is maintained. We develop a mixed-integer alternating optimization (AO) algorithm to solve the resulting problem. Simulation results validate the analytical characterizations and show that the proposed scheme achieves higher worst-case SNR than benchmarks across different deployment budgets.

0.19

Bringing Environmental Enhancement Back to Its Physical Essence via Specular Reflecting Surfaces

cs.IT ·2026-08-15 ·Qingxiao Huang, Qianyao Ren, Yiqin Deng, Jun Huang, Yang Kun +1 more
similarity 0.56
Abstract

Intelligent control of wireless propagation environments is crucial for future network capacity and reliability. Unlike circuit-controlled reconfigurable intelligent surfaces (RIS), mechanically actuated specular reflecting surfaces (SRS) offer a simpler and potentially more cost-effective alternative. In this paper, based on the tractable ray-based cascaded channel model with power-projection correction, we investigate the fundamental operational behaviors of an ideal SRS in free space. Specifically, in the angle-aligned near field, edge reflections cause non-constructive combining, resulting in a damped oscillatory convergence of the gain to an aperture-independent constant. We further obtain the far-field behavior, unbounded-aperture asymptotics, an optimal aperture size and reflection angle, and a gain-based near/far-field boundary. For misalignment, we provide accurate approximations for small and large apertures via center-point and stationary-point analyses. We also define the SRS beam pattern, derive analytical 3-dB beamwidths, and quantify the effective region where a main lobe exists. Finally, we derive a closed-form achievable-rate for an SRS-aided communication system. Numerical results validate the proposed expressions, reveal distinct near-/far-field behaviors of specular reflection, and show that SRS can outperform RIS in the far field due to continuous aperture and angular-resolution control and stronger power projection.

0.04

Modulating Retroreflector-Aided UAV-Based FSO/QKD Systems

cs.NI quant-ph ·2026-09-22 ·Duy N. Luong, Duy-Tuan Dao, Cuong T. Nguyen, Hoang D. Le, Anh T. Pham
published similarity 0.55
Abstract

Unmanned aerial vehicles (UAVs)-based free-space optics (FSO)/quantum key distribution (QKD) systems require high-precision pointing mechanisms. This increases system complexity and limits rapid deployment for lightweight and energy-constrained UAVs. This paper proposes a modulating retroreflector (MRR)-equipped UAV architecture for BB84-QKD systems that enables simplified yet accurate tracking while relaxing pointing requirements. A realistic quantum channel model is developed, for which we newly derive the channel probability distribution of transmittance (PDT). Capitalizing on the derived channel PDT, several QKD performance metrics are analytically obtained. Numerical results verify the feasibility of the proposed MRR-aided UAV for practical QKD deployment, highlight its effectiveness over conventional UAV-ground systems, and validate the accuracy of the developed analytical framework.

0.41

Secrecy Rate Maximization for UAV-Mounted Six-Dimensional Movable IRS-Assisted ISAC Systems

eess.SP ·2026-08-20 ·Chengye Hong, Botang Shi, Rongkun Zhu, Yuhan Wang, Chenyiming Jiang +1 more
published similarity 0.55
Abstract

Integrated sensing and communication (ISAC) is a key enabling technology for 6G wireless networks, but its broadcast nature raises a physical-layer security concern when the sensing target can act as a potential eavesdropper. Although intelligent reflecting surfaces (IRSs) can enhance wireless propagation and improve secrecy, existing secure IRS-assisted ISAC designs are mostly limited to fixed deployments and passive phase control, which offer limited spatial adaptability in line-of-sight-dominated low-altitude scenarios. To address this limitation, we investigate an unmanned aerial vehicle (UAV)-mounted six-dimensional movable IRS-assisted secure ISAC system, where the IRS location, orientation, and reflection coefficients are jointly optimized with the BS beamformer to maximize the secrecy rate under communication quality-of-service (QoS), power, unit-modulus, and visibility constraints. The resulting problem is highly non-convex due to the coupled active/passive beamforming variables and the location-and-orientation-dependent (pose-dependent) channel responses. To solve it efficiently, we develop a three-block alternating optimization (AO) framework, in which the active beamformer, IRS pose, and passive reflection vector are updated via linearized ADMM, warm-started particle swarm optimization, and Riemannian gradient descent, respectively. Simulation results show that the proposed design significantly outperforms fixed-location and orientation-only baselines, highlighting the importance of joint translation, rotation, and phase control for secure ISAC.

0.20