CS Paper Radar

Communication and Sensing Coverage of UAV Corridor under Beam Misalignment Error

Harris K. Armeniakos, Petros S. Bithas, Konstantinos Maliatsos, Christos Masouros, Athanasios G. Kanatas

cs.IT ·submitted 2026-10-01 09:38 UTC · v1
published

Abstract

In this paper, a unmanned aerial vehicle (UAV) corridor-assisted network is proposed to study the joint sensing and communication (JCAS) coverage probability (CP) of a terrestrial (BS) equipped with a realistic three-dimensional (3D) 3GPP antenna pattern. By employing the 3D binomial point process (BPP) to model the spatial locations of the UAV-UEs, a fixed number of UAV-UEs are deployed in an aerial corridor modeled as a finite cylinder. The BS exploits radar sensing capabilities to track a known UAV-UE under a 3D beam misalignment error, which follows a multivariate normal distribution. Subsequently, under clutter and uplink communication interference, exact- form analytical expressions for JCAS CP are derived and used to analyze the performance at the terrestrial BS. The results highlight corridor-length saturation at high UAV heights and the beamwidth trade-off between interference suppression and misalignment sensitivity.

Comment
Accepted for presentation in IEEE ISAC 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Joint Communication and Sensing in Aerial Corridors: A Novel Stochastic Geometry Framework

cs.IT ·2026-10-01 ·Harris K. Armeniakos, Petros S. Bithas, Athanasios G. Kanatas, Harpreet S. Dhillon
published similarity 0.80
Abstract · accepted for presentation in 2026 IEEE GLOBECOM

In unmanned aerial vehicle (UAVs) networks, joint communication and sensing (JCAS) is emerging as a key enabler to support extended and continuous communication and sensing capabilities for sixth-generation (6G) services among UAVs operating in swarms. Within this framework, aerial corridors provide a structured environment for supporting coordinated and reliable operations. In this paper, a comprehensive frame- work is presented to investigate the JCAS coverage probability (CP) of a UAV-base station (BS) in an aerial corridor populated by UAV-user equipments (UEs). The corridor is modeled as a finite cylinder, within which a fixed number of UAV-UEs are spatially distributed according to a three-dimensional (3D) binomial point process (BPP). The UAV-BS is assumed to be equipped with a realistic 3D third generation partnership project (3GPP) antenna pattern and exploits radar sensing capabilities to track a known UAV-UE. Subsequently, the tracked UAV-UE is assumed to perform uplink communication with the UAV-BS. Accordingly, the JCAS CP at the UAV-BS is analyzed under the presence of clutter and uplink communication interference, and exact-form analytical expressions are derived. To the best of our knowledge, this is the first work to develop a stochastic geometry framework for the rigorous analysis of JCAS performance in aerial corridors, with UAV-UE locations modeled as a 3D BPP. Among several insights, results show that increasing the directivity of the UAV-BS antenna beams leads to notable JCAS performance gains, particularly for shorter UAV corridors.

0.53

Analysis of Integrated Communication and Sensing in Cylindrical Aerial Corridors

eess.SP ·2026-10-12 ·Harris K. Armeniakos, Petros S. Bithas, Athanasios G. Kanatas, Harpreet S. Dhillon
similarity 0.76
Abstract

In unmanned aerial vehicle (UAV) networks, integrated communication and sensing (ISAC) is emerging as a key enabler to support extended and continuous communication and sensing capabilities for sixth-generation (6G) services among UAVs operating in swarms. In this paper, a comprehensive framework is presented to investigate the ISAC coverage probability of a reference UAV-base station (BS) in a UAV network. A fixed number of UAV user equipment (UAVUEs) and UAV-BSs are deployed in an aerial corridor modeled as a finite cylinder. The three-dimensional (3D) binomial point process (BPP) is used to model both the 3D spatial locations of the UAV-UEs and the UAV-BSs. By adopting realistic 3D third generation partnership project (3GPP) antenna patterns for both the UAV-UEs and UAV-BSs, the UAVs' boresight direction of the maximum antenna gain is modeled as a random unit vector. All UAV-BSs have sensing capabilities, so an arbitrary yet fixed reference UAV-BS acts as a monostatic radar to acquire sensing measurements associated with a target UAV-UE at a given time snapshot while the target UAVUE communicates with the reference UAV-BS. Consequently, considering both clutter and communication interference, exact analytical expressions for ISAC coverage probability are derived. Low complexity baseline analytical expressions are also derived by ignoring clutter interference and directional characteristics of the UAV-UEs. Finally, motivated by the vision for intelligent UAV networks, a DeepSets-based model is developed and trained to estimate the optimal location of the reference UAV-BS that maximizes ISAC performance given a spatial deployment of the UAVs. To the best of our knowledge, this is the first work to rigorously investigate ISAC performance in UAV networks while incorporating the directionality characteristics of the UAV antennas.

0.05

Beyond RSRP Coverage: UAV Serviceability in Interference-Limited Urban 5G NR Networks

eess.SY ·2026-09-18 ·Md Sharif Hossen, Vijay K. Shah, Ismail Guvenc
similarity 0.62
Abstract · 6 pages, 4 figures

Reference signal received power (RSRP) is commonly used to assess 5G cellular coverage, but it may substantially overestimate the connectivity available to cellular-connected unmanned aerial vehicles (UAVs) under strong inter-cell interference (ICI). As a UAV ascends, reduced blockage can strengthen the serving signal, while increased line-of-sight visibility to neighboring sectors can intensify ICI. This paper develops a trajectory-aware, 3GPP-based system-level framework for evaluating UAV radio serviceability during a three-dimensional flight in an urban 5G New Radio network. The framework jointly evaluates RSRP, reference signal received quality (RSRQ), and signal-to-interference-plus-noise ratio (SINR) in a 19-site, 57-sector deployment. We introduce the concept of coverage-serviceability gap to quantify the difference between RSRP availability and joint service availability. Under RSRP, RSRQ, and SINR thresholds of -100 dBm, -18 dB, and 0 dB, respectively, an inter-site distance (ISD) of 500 m provides 99.9% RSRP availability but only 13.6% joint service availability, yielding a coverage-serviceability gap of 86.3 percentage points. With RSRQ and SINR thresholds of -22 dB and -6 dB, respectively, joint availability increases to 55.0% and 63.1% for ISDs of 500 m and 1000 m, respectively. These results demonstrate that RSRP-based coverage substantially overestimates joint UAV serviceability under both evaluation configurations, with SINR remaining the limiting metric.

0.45

Statistical Channel Model for FSO Systems Assisted by a UAV-Mounted IRS

eess.SP ·2026-08-11 ·Ferdaous Tarhouni, Vasilis K. Papanikolaou, Laura Cottatellucci, Mohammad-Ali Khalighi, Robert Schober
similarity 0.62
Abstract · 13 pages, 3 figures, conference

Integrating optical intelligent reflecting surfaces (IRSs) into aerial platforms, such as unmanned aerial vehicles (UAVs), has been proposed to relax the line-of-sight (LoS) constraint, extend coverage, and enhance deployment flexibility of free space optical (FSO) systems. However, misalignment errors induced by the UAV hovering, in both position and orientation, may degrade connectivity and impair the end-to-end channel quality. In this paper, we develop novel expressions for the electric fields incident on and reflected by an optical IRS, based on the Huygens-Fresnel principle. The resulting expressions are applicable for any combination of incident and reflected propagation directions. Building on this framework, we derive a closed-form statistical channel model that captures the geometric and misalignment losses of an FSO link assisted by a UAV-mounted IRS in the presence of random UAV fluctuations. In particular, we develop a statistical model for the beam misalignment at the receiver lens, assuming Gaussian fluctuations in both the UAV position and orientation. The proposed analytical model is validated through Monte Carlo (MC) simulations and is further used to provide practical design guidelines regarding the optimal placement of the UAV-mounted IRS for the minimization of the outage probability.

0.10

Geometry-Aware Multi-UAV Full-Duplex Communication: System Design and Experiment

cs.IT ·2026-09-27 ·Tao Yu, Kiyomichi Araki, Tomohiro Mogi, Yasushi Hada, Kei Sakaguchi
published similarity 0.61
Abstract · accepted by IEEE Transactions on Vehicular Technology

The deployment of unmanned aerial vehicle (UAV) systems relies on high-performance yet lightweight wireless links between UAVs and ground stations (GSs). This paper presents a geometry-aware multi-UAV in-band full-duplex (MU-IBFD) communication system that uses high-gain directional antennas and separated uplink/downlink channels to convert self-interference into controllable co-channel interference (CCI) between UAVs, thereby avoiding energy-intensive self-interference cancelers on UAVs. We also derive a geometry-aware CCI model and define a reliable operating region (ROR) in the 3D airspace, within which the SINR requirement is satisfied. A prototype consisting of two UAVs and a GS is developed, and field trials are conducted. The measured CCI as a function of UAV positions agrees well with the theoretically predicted non-ROR region, and the downlink capacity significantly exceeds that of a conventional time-division duplex (TDD) with omni-directional scheme and higher transmit power and approaches that of ideal IBFD in most of the airspace. A proof-of-concept 4K/60p video transmission further demonstrates the practical potential of the proposed MU-IBFD system.

0.34

Cost of Decibel-Domain Averaging of Line-of-Sight States in Aerial Coverage Analysis

eess.SP ·2026-11-12 ·Ismail Guvenc
similarity 0.60
Abstract · 5 pages, 2 figures, 2 tables

Uncrewed aerial vehicle (UAV) coverage studies routinely average the line-of-sight (LoS) and non-line-of-sight (NLoS) path loss in the decibel domain, weighted by their probabilities. Since the conditional path-loss distribution is bimodal, the resulting mean path loss describes no physical link. We give the error of this mean path loss, relative to the path loss that corresponds to the mean received power, in closed form. We quantify it by ray tracing an ITU-R P.1410 city, supplying the averaged model with the exact LoS probability so that no parameter error contributes. Our numerical results show that the averaged path loss is 6.6 dB higher than the path loss of the mean received power and lies within 2 dB of only 6.2% of the links. It moves the coverage-optimal altitude from 1764 m to 778 m and understates the outage probability by up to 0.198.

0.31

Enhancing 3GPP Urban Channel Models For Terrestrial-to-Non-Terrestrial Communication

eess.SP ·2026-08-28 ·Gerhard Schreiber, Chenrui Sun, Joerg Schaepperle, Le-Hang Nguyen, Thorsten Wild
code/data similarity 0.58
Abstract

We have developed enhanced models for large-scale channel parameters intended for terrestrial-to-non-terrestrial (NTN) communication in Urban environments for supporting devices above ground levels, such as drones. The models are formulated as functions of terminal height above ground and elevation angle, applicable to S-Band and Ka-Band frequencies. To ensure realistic models, an open-source 3D scene generator was utilized to create a diverse set of urban scenes across Europe. Sionna ray-tracing was employed to generate path-gain samples for outdoor terminals, covering a range of heights up to 300 meters and elevation angles up to 90°. Our proposed analytical functions show excellent agreement to ray-tracing data for line-of-sight (LOS) probability, shadow-fading (SF), and clutter-loss (CL). Furthermore, a comparative coupling gain analysis with existing 3GPP models reveals notable differences, particularly caused by smaller CL and higher LOS probabilities from proposed models. Designed for ease of use, these models can be seamlessly integrated into simulation tools, offering a practical solution for researchers and engineers.

0.35

Vehicle and UAV Detection and Tracking with LTE Downlink Reference Signals: A Ray-Traced Evaluation on a Mapped Suburban Site with Licensed Base-Station Records

cs.NI ·2026-11-01 ·Arun K. Gurung, Satha K. Sathananthan
similarity 0.58
Abstract · 18 pages, 7 figures, 14 tables. Revised version

Passive sensing on the cellular downlink places the receiver at the user equipment and changes nothing in the network. We report simulation results for an LTE band-3 cell-specific reference signal arm on a ray-traced channel. On a synthetic street canyon the arm is compared with an uplink sounding reference signal arm on the same band, target and scorer: missed-detection probabilities of 0.667 and 0.772. On a surveyed site built from OpenStreetMap footprints and the licensed site record, nine receiver positions along the street track the vehicle at coverage between 29.9 % and 61.7 %; a 283 m lap separates target height from trajectory at 1.6 to 30 m; a 137 m lap on the built-up street tracks a vehicle and a 15 m airborne target on every cell, and 8 receivers at 135 m spacing carry one illuminator's coverage over 1140 m of the street. Potential future work includes extending the analysis to multiple illuminators and varying receiver configurations, and confirmation through over-the-air measurements.

0.34