CS Paper Radar

Joint Communication and Sensing in Aerial Corridors: A Novel Stochastic Geometry Framework

Harris K. Armeniakos, Petros S. Bithas, Athanasios G. Kanatas, Harpreet S. Dhillon

cs.IT ·submitted 2026-10-01 09:29 UTC · v1
published

Abstract

In unmanned aerial vehicle (UAVs) networks, joint communication and sensing (JCAS) is emerging as a key enabler to support extended and continuous communication and sensing capabilities for sixth-generation (6G) services among UAVs operating in swarms. Within this framework, aerial corridors provide a structured environment for supporting coordinated and reliable operations. In this paper, a comprehensive frame- work is presented to investigate the JCAS coverage probability (CP) of a UAV-base station (BS) in an aerial corridor populated by UAV-user equipments (UEs). The corridor is modeled as a finite cylinder, within which a fixed number of UAV-UEs are spatially distributed according to a three-dimensional (3D) binomial point process (BPP). The UAV-BS is assumed to be equipped with a realistic 3D third generation partnership project (3GPP) antenna pattern and exploits radar sensing capabilities to track a known UAV-UE. Subsequently, the tracked UAV-UE is assumed to perform uplink communication with the UAV-BS. Accordingly, the JCAS CP at the UAV-BS is analyzed under the presence of clutter and uplink communication interference, and exact-form analytical expressions are derived. To the best of our knowledge, this is the first work to develop a stochastic geometry framework for the rigorous analysis of JCAS performance in aerial corridors, with UAV-UE locations modeled as a 3D BPP. Among several insights, results show that increasing the directivity of the UAV-BS antenna beams leads to notable JCAS performance gains, particularly for shorter UAV corridors.

Comment
accepted for presentation in 2026 IEEE GLOBECOM

Closest papers

Nearest neighbours by meaning across the whole index.

Analysis of Integrated Communication and Sensing in Cylindrical Aerial Corridors

eess.SP ·2026-10-12 ·Harris K. Armeniakos, Petros S. Bithas, Athanasios G. Kanatas, Harpreet S. Dhillon
similarity 0.88
Abstract

In unmanned aerial vehicle (UAV) networks, integrated communication and sensing (ISAC) is emerging as a key enabler to support extended and continuous communication and sensing capabilities for sixth-generation (6G) services among UAVs operating in swarms. In this paper, a comprehensive framework is presented to investigate the ISAC coverage probability of a reference UAV-base station (BS) in a UAV network. A fixed number of UAV user equipment (UAVUEs) and UAV-BSs are deployed in an aerial corridor modeled as a finite cylinder. The three-dimensional (3D) binomial point process (BPP) is used to model both the 3D spatial locations of the UAV-UEs and the UAV-BSs. By adopting realistic 3D third generation partnership project (3GPP) antenna patterns for both the UAV-UEs and UAV-BSs, the UAVs' boresight direction of the maximum antenna gain is modeled as a random unit vector. All UAV-BSs have sensing capabilities, so an arbitrary yet fixed reference UAV-BS acts as a monostatic radar to acquire sensing measurements associated with a target UAV-UE at a given time snapshot while the target UAVUE communicates with the reference UAV-BS. Consequently, considering both clutter and communication interference, exact analytical expressions for ISAC coverage probability are derived. Low complexity baseline analytical expressions are also derived by ignoring clutter interference and directional characteristics of the UAV-UEs. Finally, motivated by the vision for intelligent UAV networks, a DeepSets-based model is developed and trained to estimate the optimal location of the reference UAV-BS that maximizes ISAC performance given a spatial deployment of the UAVs. To the best of our knowledge, this is the first work to rigorously investigate ISAC performance in UAV networks while incorporating the directionality characteristics of the UAV antennas.

0.05

Communication and Sensing Coverage of UAV Corridor under Beam Misalignment Error

cs.IT ·2026-10-01 ·Harris K. Armeniakos, Petros S. Bithas, Konstantinos Maliatsos, Christos Masouros, Athanasios G. Kanatas
published similarity 0.80
Abstract · Accepted for presentation in IEEE ISAC 2026

In this paper, a unmanned aerial vehicle (UAV) corridor-assisted network is proposed to study the joint sensing and communication (JCAS) coverage probability (CP) of a terrestrial (BS) equipped with a realistic three-dimensional (3D) 3GPP antenna pattern. By employing the 3D binomial point process (BPP) to model the spatial locations of the UAV-UEs, a fixed number of UAV-UEs are deployed in an aerial corridor modeled as a finite cylinder. The BS exploits radar sensing capabilities to track a known UAV-UE under a 3D beam misalignment error, which follows a multivariate normal distribution. Subsequently, under clutter and uplink communication interference, exact- form analytical expressions for JCAS CP are derived and used to analyze the performance at the terrestrial BS. The results highlight corridor-length saturation at high UAV heights and the beamwidth trade-off between interference suppression and misalignment sensitivity.

0.34

Beyond RSRP Coverage: UAV Serviceability in Interference-Limited Urban 5G NR Networks

eess.SY ·2026-09-18 ·Md Sharif Hossen, Vijay K. Shah, Ismail Guvenc
similarity 0.62
Abstract · 6 pages, 4 figures

Reference signal received power (RSRP) is commonly used to assess 5G cellular coverage, but it may substantially overestimate the connectivity available to cellular-connected unmanned aerial vehicles (UAVs) under strong inter-cell interference (ICI). As a UAV ascends, reduced blockage can strengthen the serving signal, while increased line-of-sight visibility to neighboring sectors can intensify ICI. This paper develops a trajectory-aware, 3GPP-based system-level framework for evaluating UAV radio serviceability during a three-dimensional flight in an urban 5G New Radio network. The framework jointly evaluates RSRP, reference signal received quality (RSRQ), and signal-to-interference-plus-noise ratio (SINR) in a 19-site, 57-sector deployment. We introduce the concept of coverage-serviceability gap to quantify the difference between RSRP availability and joint service availability. Under RSRP, RSRQ, and SINR thresholds of -100 dBm, -18 dB, and 0 dB, respectively, an inter-site distance (ISD) of 500 m provides 99.9% RSRP availability but only 13.6% joint service availability, yielding a coverage-serviceability gap of 86.3 percentage points. With RSRQ and SINR thresholds of -22 dB and -6 dB, respectively, joint availability increases to 55.0% and 63.1% for ISDs of 500 m and 1000 m, respectively. These results demonstrate that RSRP-based coverage substantially overestimates joint UAV serviceability under both evaluation configurations, with SINR remaining the limiting metric.

0.45

Capacity of Multi-Layer Manhattan-Grid UAV Corridors Served by Terrestrial 5G NR Networks

eess.SP cs.PF ·2026-11-06 ·Saad Masrur, M M Sadman Shafi, Md Sharif Hossen, Ismail Guvenc
similarity 0.61
Abstract · Under Review

Advanced air mobility (AAM) is expected to organize unmanned aerial vehicle (UAV) traffic into corridors at multiple altitudes. In this paper, we study the downlink (DL) and uplink (UL) capacity of a multi-layer Manhattan-grid corridor mesh served by a terrestrial fifth-generation (5G) new radio (NR) macro network. The corridor spacing and the numbers of layers, UAVs, and base stations are configurable. We combine the 3GPP aerial channel and antenna models, correlated UAV mobility, and frequency-selective fading with an NR physical-layer abstraction that includes channel aging and link adaptation. Results show that UAVs above 90 m experience a DL signal-to-interference-plus-noise ratio (SINR) about 17 dB below that of ground users, and that a dense macro network with $10^\circ$ downtilt leaves 17-29% of corridor positions without DL service under full-buffer load, regardless of corridor spacing. On a common layout, the carrier frequency (700 MHz, 3.5 GHz, or 7.2 GHz) changes the UAV SINR by less than 0.5 dB, since the corridor links are strongly interference-limited. The UL is the bottleneck: at 85% satisfaction, a 20 MHz carrier supports only about 3.4-4.1 UAVs/km$^2$ with 4 Mb/s of UL video per UAV.

0.25

Geometry-Aware Multi-UAV Full-Duplex Communication: System Design and Experiment

cs.IT ·2026-09-27 ·Tao Yu, Kiyomichi Araki, Tomohiro Mogi, Yasushi Hada, Kei Sakaguchi
published similarity 0.61
Abstract · accepted by IEEE Transactions on Vehicular Technology

The deployment of unmanned aerial vehicle (UAV) systems relies on high-performance yet lightweight wireless links between UAVs and ground stations (GSs). This paper presents a geometry-aware multi-UAV in-band full-duplex (MU-IBFD) communication system that uses high-gain directional antennas and separated uplink/downlink channels to convert self-interference into controllable co-channel interference (CCI) between UAVs, thereby avoiding energy-intensive self-interference cancelers on UAVs. We also derive a geometry-aware CCI model and define a reliable operating region (ROR) in the 3D airspace, within which the SINR requirement is satisfied. A prototype consisting of two UAVs and a GS is developed, and field trials are conducted. The measured CCI as a function of UAV positions agrees well with the theoretically predicted non-ROR region, and the downlink capacity significantly exceeds that of a conventional time-division duplex (TDD) with omni-directional scheme and higher transmit power and approaches that of ideal IBFD in most of the airspace. A proof-of-concept 4K/60p video transmission further demonstrates the practical potential of the proposed MU-IBFD system.

0.34

From Ideal Motion to Flight-Executable Communications: LLM-Evolved Multi-UAV Deployment for Cell-Free Massive MIMO

eess.SP ·2026-09-21 ·Yuyao Wang, Gaoze Mu, Yongan Zheng, Yanzhao Hou, Qingqing Wu +3 more
similarity 0.60
Abstract · 13 pages. 12 figures

Cell-free massive multiple-input multiple-output (CF-mMIMO) is a promising paradigm for future wireless networks, providing user-centric services and cooperative coverage. By using unmanned aerial vehicles (UAVs) as aerial access points, CF-mMIMO networks can exploit UAV mobility to enhance three-dimensional (3D) coverage and spectral efficiency (SE). However, most existing studies on UAV deployment for communication optimization typically assume that UAVs follow ideal point-mass motion (IM), neglecting flight-control constraints and finite-horizon position errors in real flight execution. Consequently, IM-trained deployment policies may degrade severely or become difficult to execute in practice. Motivated by this, we model each UAV as a six-degree-of-freedom quadrotor rigid body with a cascaded flight controller to capture the impact of flight-control-constrained motion (FM) on communication optimization. Based on this model, we formulate a joint UAV 3D deployment and power allocation problem under FM to maximize the downlink average SE in CF-mMIMO networks. To address this problem, we propose LERE, a large language model (LLM)-enhanced multi-agent reinforcement learning (MARL) framework. In LERE, the LLM evolves hybrid rewards with both global and local components via multi-level feedback. The evolved hybrid rewards guide MARL policy optimization and promote multi-UAV cooperation. Experimental results demonstrate that LERE achieves higher SE than reward-design baselines while substantially reducing UAV position errors. Notably, when tested under FM execution, the FM-trained LERE policy achieves a 60.49\% SE gain over its IM-trained counterpart, confirming the necessity of incorporating flight-control constraints into UAV-enabled CF-mMIMO optimization.

0.18

Reliability Analysis for Ground-Air Cooperative Wireless-Powered Internet-of-Things

cs.IT ·2026-11-07 ·Xingyu Huang, Zhican Zhong, Yulei Wang, Yalin Liu, Yongqiang Cui +1 more
similarity 0.60
Abstract · 7 pages, 6 figures

Battery-constrained Internet of Things (IoT) devices face significant challenges in maintaining long-term uplink data collection, especially in network-limited scenarios. This paper investigates a Ground-Air cooperative Wireless-Powered IoT network (GA-WPIoT), where ground power beacons (GPBs) provide radio-frequency energy supply and unmanned aerial vehicles (UAVs) serve as flexible aerial access points for IoT data collection. Unlike conventional UAV-enabled wireless-powered solutions, GA-WPIoT decouples energy transfer and data collection, reducing the hardware and energy burden of UAVs. To capture the device-level performance variations among IoT devices, we develop a stochastic geometry-based analytical framework, where UAVs are modeled by a Matérn hard-core point process, IoT devices by a Poisson point process, and GPBs by a finite annular binomial point process. The conditional success probabilities of the GPB-device link (for energy transfer) and the device-UAV link (for data collection) are characterized, and device-level reliability distributions are obtained through the Meta-Distribution based analysis. Numerical results under suburban and urban environments reveal the impacts of UAV altitude and annular GPB deployment on reliability distributions, providing useful guidelines for GA-WPIoT.

0.25

Joint Air Corridor and BS Coverage Planning for Large-Scale High-Density Low-Altitude Aerial Networks via Channel Knowledge Maps

eess.SP ·2026-11-10 ·Jiaxuan Li, Yilong Chen, Yuan Guo, Fan Liu, Jie Xu
similarity 0.59
Abstract

This paper studies the joint air corridor and base station (BS) coverage planning problem for high-density low-altitude aerial networks supported by terrestrial cellular infrastructures. In the considered system, unmanned aerial vehicles (UAVs) operate within a structured air corridor planned over a grid-based airspace, and each BS serves selected corridor grid cells by sharing its communication resources among all UAVs therein. Each BS's traffic load depends on both the number of covered corridor cells and the UAV density, thereby affecting the communication rate available to each UAV. We exploit the channel knowledge map (CKM) to characterize the channel gains between BSs and candidate airspace cells and evaluate desired signals and inter-cell interference for environment-aware offline planning. Based on CKM, we jointly optimize the corridor layout and BS coverage to minimize a weighted objective balancing corridor length and the supportable average UAV density along the entire corridor, subject to minimum communication rate requirements for all UAVs along the air corridor. The joint design is formulated as a mixed-integer linear program (MILP), which can be optimally solved using off-the-shelf solvers. For large maps, we develop a scalable suboptimal algorithm based on Lagrangian relaxation and A* search. Specifically, we incorporate BS resource constraints into A* corridor search via Lagrangian relaxation, and then jointly optimize BS coverage and UAV density along the generated corridors under the original rate constraints. Numerical results demonstrate the benefits of the proposed joint design in supporting high-density UAV operations and show that the proposed algorithm obtains high-quality solutions with substantially reduced computation time.

0.15