CS Paper Radar

Reliability Analysis for Ground-Air Cooperative Wireless-Powered Internet-of-Things

Xingyu Huang, Zhican Zhong, Yulei Wang, Yalin Liu, Yongqiang Cui, Di Bai

cs.IT ·submitted 2026-11-07 03:17 UTC · v1

Abstract

Battery-constrained Internet of Things (IoT) devices face significant challenges in maintaining long-term uplink data collection, especially in network-limited scenarios. This paper investigates a Ground-Air cooperative Wireless-Powered IoT network (GA-WPIoT), where ground power beacons (GPBs) provide radio-frequency energy supply and unmanned aerial vehicles (UAVs) serve as flexible aerial access points for IoT data collection. Unlike conventional UAV-enabled wireless-powered solutions, GA-WPIoT decouples energy transfer and data collection, reducing the hardware and energy burden of UAVs. To capture the device-level performance variations among IoT devices, we develop a stochastic geometry-based analytical framework, where UAVs are modeled by a Matérn hard-core point process, IoT devices by a Poisson point process, and GPBs by a finite annular binomial point process. The conditional success probabilities of the GPB-device link (for energy transfer) and the device-UAV link (for data collection) are characterized, and device-level reliability distributions are obtained through the Meta-Distribution based analysis. Numerical results under suburban and urban environments reveal the impacts of UAV altitude and annular GPB deployment on reliability distributions, providing useful guidelines for GA-WPIoT.

Comment
7 pages, 6 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Joint Communication and Sensing in Aerial Corridors: A Novel Stochastic Geometry Framework

cs.IT ·2026-10-01 ·Harris K. Armeniakos, Petros S. Bithas, Athanasios G. Kanatas, Harpreet S. Dhillon
published similarity 0.60
Abstract · accepted for presentation in 2026 IEEE GLOBECOM

In unmanned aerial vehicle (UAVs) networks, joint communication and sensing (JCAS) is emerging as a key enabler to support extended and continuous communication and sensing capabilities for sixth-generation (6G) services among UAVs operating in swarms. Within this framework, aerial corridors provide a structured environment for supporting coordinated and reliable operations. In this paper, a comprehensive frame- work is presented to investigate the JCAS coverage probability (CP) of a UAV-base station (BS) in an aerial corridor populated by UAV-user equipments (UEs). The corridor is modeled as a finite cylinder, within which a fixed number of UAV-UEs are spatially distributed according to a three-dimensional (3D) binomial point process (BPP). The UAV-BS is assumed to be equipped with a realistic 3D third generation partnership project (3GPP) antenna pattern and exploits radar sensing capabilities to track a known UAV-UE. Subsequently, the tracked UAV-UE is assumed to perform uplink communication with the UAV-BS. Accordingly, the JCAS CP at the UAV-BS is analyzed under the presence of clutter and uplink communication interference, and exact-form analytical expressions are derived. To the best of our knowledge, this is the first work to develop a stochastic geometry framework for the rigorous analysis of JCAS performance in aerial corridors, with UAV-UE locations modeled as a 3D BPP. Among several insights, results show that increasing the directivity of the UAV-BS antenna beams leads to notable JCAS performance gains, particularly for shorter UAV corridors.

0.52

Secure Wireless Information Transfer and Energy Harvesting in HAPS-Based Network

cs.IT eess.SY ·2026-08-23 ·Khaled Humadi, Gunes Karabulut-Kurt, Wessam Ajib, Wei-Ping Zhu
published similarity 0.58
Abstract

High-altitude platform station (HAPS) serves as a promising enabler for wide-area connectivity of low-power wireless devices, particularly in remote and underserved regions. However, the strong line-of-sight characteristics of HAPS links increase the risk of eavesdropping, while the limited energy budget of ground devices remains a major operational constraint. In this work, we propose a secure wireless information and energy harvesting framework for HAPS-based networks in the presence of spatially distributed eavesdroppers. The proposed system integrates friendly jamming and power transfer nodes equipped with null-steering capability antennas, such that they not only degrade the reception quality at eavesdroppers but also act as additional radio-frequency energy sources for legitimate users. A time-switching wireless information and power transfer architecture is adopted at the user side. Under this framework, we derive tractable expressions for the joint rate-energy coverage and the average secrecy rate using stochastic geometry tools. Numerical and Monte Carlo results validate the developed analysis and reveal key design trade-offs among the time allocation factor, null-steering-zone radius around each user, and jammer transmit power. In particular, the results show that properly coordinated null-steering jamming can simultaneously support secure communication and adequate wireless power transfer, while an appropriate choice of system parameters, such as time allocation factor and jamming power, is required to balance harvested energy, communication reliability, and secrecy performance.

0.31

Toward Mission-Critical ISAC: Reliable Energy-Aware Coordination in UAV Swarms

cs.NI cs.ITcs.MAcs.RO+1 ·2026-09-14 ·Masoud Shokrnezhad, Tarik Taleb, Amir Javadpour
published similarity 0.57
Abstract · Accepted to IEEE ISAC 2026

Unmanned aerial vehicle (UAV) swarms deployed in mission-critical applications must simultaneously track a mobile aerial target and maintain reliable data links. However, active integrated sensing and communication (ISAC) operation imposes a dual energy burden on propulsion and transmission, threatening mission continuity through premature battery depletion. In this paper, we propose a two-tier UAV swarm architecture in which mission UAVs (MUAVs) execute cooperative ISAC for mobile aerial target tracking while dedicated charging UAVs (CUAVs), equipped with solar harvesting panels, replenish low-battery MUAVs via aerial UAV-to-UAV wireless power transfer (WPT). We formulate the joint minimization of the cooperative posterior Cramér-Rao bound (PCRB) over MUAV trajectories, per-slot sensing-communication time splits, WPT scheduling and admission, and CUAV rendezvous trajectories, subject to minimum uplink rate, dual-tier energy causality, WPT proximity, collision-avoidance, and speed constraints, yielding a non-convex mixed-integer program (MIP) that, to the best of our knowledge, is the first to jointly couple cooperative ISAC sensing quality with aerial WPT and dual-tier energy management. To solve it efficiently, we propose Receding-Horizon Alternating Optimization (RHAO), a four-block per-slot algorithm that decomposes the problem into: charging admission via the Hungarian algorithm, MUAV trajectory and time-split via successive convex approximation (SCA), CUAV rendezvous, and WPT power allocation, with monotone convergence guarantees. Simulation results demonstrate that RHAO reduces the mean PCRB by 16.8 times over a fixed-time-split baseline and 5.4 times over a static-trajectory scheme, while the aerial WPT subsystem sustains all MUAVs above the energy-critical threshold throughout the full mission horizon.

0.36

A Distributed Energy Relay Framework for Sustainable Drone Missions

cs.DC ·2026-10-13 ·I-Ling Yen, Farokh Bastani, Akeem Mohammed, Agastya Bose
similarity 0.57
Abstract

Limited battery endurance remains a major obstacle to persistent UAV missions. Existing energy-replenishment approaches typically rely on battery-swapping/charging infrastructure or on ground vehicles with accessible road networks - assumptions that may not hold in infrastructure-less regions (ILRs) such as remote wilderness, mountainous terrain, and disaster-stricken areas. We formulate energy resupply in ILRs as a distinct logistics problem, in which energy itself must be projected into a region with no pre-existing infrastructure, and proposes a Distributed Energy Relay Framework that enables cooperative energy delivery using porter drones. The framework introduces a Transportation-by-Relay-and-Cache (TRC) mechanism, in which drones relay battery resources toward a mission location. Additional models are developed to characterize battery transportation capacity, relay amplification, energy-delivery capability, operational cost, and reliability. Based on these models, stations independently evaluate their delivery capability and submit bids to a mission coordinator, which selects an energy-delivery coalition that satisfies mission requirements while minimizing cost. Analytical evaluation illustrates the impact of battery characteristics and drone capabilities on energy projection and demonstrates the effectiveness of the proposed framework for sustaining UAV missions in ILRs.

0.20

FLoRa: Flight-Assisted Data Collection from Duty Cycling LoRa Nodes under Energy Constraints

cs.NI cs.LG ·2026-10-06 ·Naresh Babu Kakarla, V. Mahendran
similarity 0.57
Abstract · 20 pages

Data collection using Unmanned Aerial Vehicles (UAVs) is challenging when LoRa IoT Devices (IoTDs) duty-cycle to conserve battery. Under energy constraints, a UAV must decide which IoTDs to visit, in what order, where to hover, and how many times to probe each node, while time-based data freshness decays. Tractably solving this problem requires a multi-level optimization architecture: discrete combinatorial optimization for routing, continuous global optimization for spatial positioning, and sequential decision-making under uncertainty. We propose FLoRa, a Flight-assisted LoRa data collection architecture using Simulated Annealing (SA) for path planning, Covariance Matrix Adaptation Evolution Strategy (CMA-ES) for hover positioning, and Partially Observable Markov Decision Processes (POMDPs) for probing IoTDs. To quantify collection utility from duty-cycling nodes, we introduce the Value of Information for Pull-based systems (VIP), a metric that rewards fresh data and penalizes failed probes, imposing well-posedness and preventing indefinite probing when an IoTD is off. Tracking hard battery constraints on every POMDP sample path requires state augmentation, worsening the curse of dimensionality. For tractability, SA and CMA-ES work on the hard battery constraints, while at the POMDP layer we relax them into soft average constraints via Lagrangian relaxation. Since solving the network-wide POMDP is computationally complex, we decompose it into node-level POMDPs by approximating inter-node time dependency using a forward-decomposition technique. Evaluation shows FLoRa outperforms metaheuristic, greedy, and deep reinforcement learning baselines by 30.6%, 27.8%, and 15.2% in total expected VIP, while increasing node coverage by 24.5%, 29.2%, and 8.8%, and successful collections by 24.3%, 25.6%, and 15.2%, respectively.

0.22

Mobility-Aware Task Offloading in Mobile Edge Computing-Empowered Space-Air-Ground Integrated Internet-of-Things Networks

cs.NI ·2026-11-10 ·Minghao Sun, Jinghuai Xiong, Xiaoli Chu, Zitian Zhang
benchmark similarity 0.56
Abstract

Mobile edge computing (MEC)-empowered spaceair-ground integrated Internet-of-Things (IoT) networks (SAGIINs) provide a promising solution for computation-intensive tasks generated by mobile IoT devices (IDs). However, task offloading in SAGIINs is challenging due to time-varying IDto-unmanned aerial vehicle (UAV) channels, intermittent LEO satellite service availability, and the coupling among UAV trajectory, communication, computation, and energy decisions. This paper investigates an energy-efficient task offloading and UAV trajectory planning problem in an MEC-empowered SAGIIN, where one UAV acts as both an aerial relay and an MEC server, and multiple LEO satellites provide supplementary computing resources. The UAV trajectory planning, task splitting, and computing resource allocation are jointly optimized to minimize the total system energy consumption under task completion, communication, computation, flight region, and satellite service window constraints. The resulting non-convex problem is decomposed into a UAV trajectory planning subproblem and a task splitting and computing resource allocation subproblem. To solve the former, a retrieval-augmented generation (RAG)-assisted large language model (LLM)-enhanced deep deterministic policy gradient (DDPG) algorithm, termed RLD, is proposed. The latter is shown to be convex and can be solved by using CVXPY for a given UAV trajectory. A weighted retrieval score is further designed to balance ID mobility-pattern similarity and historical UAV trajectory energy performance. Simulation results show that RLD completes all computational tasks in previously unseen test scenarios while consuming less total energy than the benchmark algorithms.

0.18

Performance Evaluation of HAPS-enabled Coverage Enhancement in Hard-to-Reach Areas

cs.NI ·2026-09-04 ·Hao Lin, Mustafa A. Kishk, Mohamed-Slim Alouini
top venue similarity 0.56
Abstract · 15 pages, 12 figures, published in IEEE Transactions on Wireless Communications

High altitude platform stations (HAPSs) are becoming a key component of future non-terrestrial networks (NTNs). HAPSs can serve a larger area than uncrewed aerial vehicles (UAVs) and offer lower propagation latency, maintenance expense, and energy costs than satellites. A major application of HAPSs is to serve the areas where terrestrial network (TN) deployment is infeasible, especially in hard-to-reach areas and post-disaster areas. For instance, in the Amazon rainforest, the Mediterranean region, and deserts, TN deployment is severely constrained by geographical and environmental conditions. Only areas close to transportation networks or coastlines can be covered, while large areas remain uncovered. Such coverage holes in hard-to-reach areas are typically overlooked in existing literature. Motivated by these realistic cases, in this paper, we use tools from stochastic geometry to mathematically model hard-to-reach areas where cellular terrestrial infrastructure only exists at their perimeter. We propose to deploy a HAPS constellation over this hard-to-reach area to enhance connectivity. For that setup, we derive the downlink (DL) and uplink (UL) coverage performance of the considered user equipment (UE) as a function of the location of the UE inside the coverage hole. Our results show how the number of HAPSs, beamwidth, and HAPS altitude affect the DL and UL coverage probabilities. Finally, we provide multiple useful guidelines for future HAPS deployment.

0.46

Utility-Driven Spatial Data Sampling for UAV-Assisted Scientific Smart Farming

cs.GT ·2026-09-04 ·Keiwan Soltani, Sajal K. Das
similarity 0.55
Abstract · 2 pages, 1 figure. Accepted and presented as a poster at the 38th International Conference on Scalable Scientific Data Management (SSDBM 202…

Large smart-farming deployments generate continuous scientific data from spatially distributed sensors, including soil, humidity, temperature, crop-health, and pest-related measurements. In vast agricultural fields, however, an energy-constrained unmanned aerial vehicle (UAV) often cannot collect data from every sensor during each mission. Existing UAV-assisted collection methods typically optimize coverage, route length, data volume, or freshness, but they do not always distinguish between data that is merely available and data that is scientifically valuable. This poster introduces a utility-driven spatial sampling framework for UAV-assisted smart farming. The field is partitioned into grid cells, each sized according to the UAV ground coverage range. After an initial exploration phase, each cell receives a scientific utility score based on freshness, redundancy, anomaly likelihood, and model uncertainty. The UAV then selects and visits a subset of high-utility cells under battery and return-to-base constraints. The proposed framework reframes UAV-based collection as adaptive scientific data management rather than exhaustive sensing.

0.30