CS Paper Radar

Secure Wireless Information Transfer and Energy Harvesting in HAPS-Based Network

Khaled Humadi, Gunes Karabulut-Kurt, Wessam Ajib, Wei-Ping Zhu

cs.IT eess.SY ·submitted 2026-08-23 16:28 UTC · v1
published

Abstract

High-altitude platform station (HAPS) serves as a promising enabler for wide-area connectivity of low-power wireless devices, particularly in remote and underserved regions. However, the strong line-of-sight characteristics of HAPS links increase the risk of eavesdropping, while the limited energy budget of ground devices remains a major operational constraint. In this work, we propose a secure wireless information and energy harvesting framework for HAPS-based networks in the presence of spatially distributed eavesdroppers. The proposed system integrates friendly jamming and power transfer nodes equipped with null-steering capability antennas, such that they not only degrade the reception quality at eavesdroppers but also act as additional radio-frequency energy sources for legitimate users. A time-switching wireless information and power transfer architecture is adopted at the user side. Under this framework, we derive tractable expressions for the joint rate-energy coverage and the average secrecy rate using stochastic geometry tools. Numerical and Monte Carlo results validate the developed analysis and reveal key design trade-offs among the time allocation factor, null-steering-zone radius around each user, and jammer transmit power. In particular, the results show that properly coordinated null-steering jamming can simultaneously support secure communication and adequate wireless power transfer, while an appropriate choice of system parameters, such as time allocation factor and jamming power, is required to balance harvested energy, communication reliability, and secrecy performance.

Closest papers

Nearest neighbours by meaning across the whole index.

Interference-Aware Downlink Power Control for High-Altitude Platform Stations with QoS and Max-Min Fairness

eess.SP ·2026-10-08 ·Rajan Shrestha, Hayder Al-Hraishawi
published similarity 0.63
Abstract · Accepted for presentation at IEEE Consumer Communications & Networking Conference (CCNC 2027)

High-altitude platform stations (HAPS) are a promising component of non-terrestrial networks (NTNs) for wide-area connectivity. However, serving multiple users over large user footprints requires efficient power-control mechanisms that account for the unique propagation characteristics and strict power constraints of HAPS. This paper develops a tractable analytical and optimization framework for downlink power allocation in HAPS systems under statistical channel state information, 3GPP NTN path loss, and Rician fading. A closed-form expression for the signal-to-interference-plus-noise ratio (SINR) with mean-channel maximal-ratio transmission (MRT) precoding is derived, capturing geometry-dependent inter-user interference coupling. Based on this, two power-control schemes are proposed: quality-of-service (QoS)-constrained power minimization and max-min SINR fairness. The QoS solution is obtained in closed form or through a low-complexity fixed-point iteration, while the max-min solution is obtained through bisection. Numerical results demonstrate up to 6 dB reduction in required transmit power at moderate-to-high target rates and improved worst-user SINR compared to the uniform power, inverse path-loss, and geometry-aware heuristic allocations. The proposed QoS-optimal scheme also achieves a QoS feasibility probability of approximately 0.95 at R_req = 2.5 bits/s/Hz and P_max = 35 dBm, while the uniform power, inverse path-loss, and geometry-aware heuristic allocations achieve less than 0.4. Moreover, the proposed schemes achieve performance comparable to the linear programming (LP)-based benchmarks at a fraction of the computational cost, reducing the average computation time by approximately 99.97% when K = 20.

0.25

Group Physical-Layer Authentication and Confidential Beamforming in Non-Terrestrial Networks

eess.SP cs.CR ·2026-10-30 ·Parsa Rajabi, Mohammad Reza Abedi, Paeiz Azmi, Nader Mokari
theory similarity 0.61
Abstract

Coordinated high-altitude platform station (HAPS) networks need to authenticate group responses and protect private data under shared power constraints. This paper studies joint group physical-layer authentication (PLA) and confidential beamforming using a fresh secret tag superimposed on private data. For received attacks independent of the current tag, we derive exact finite-block expressions for false acceptance and legitimate rejection. These expressions translate authentication error targets into a required tag signal-to-interference-plus-noise ratio (SINR). We establish a nonzero asymptotic tag-energy floor and analyze residual frequency offset and peak-power restrictions. The legitimate receiver removes the tag by orthogonal projection, which discards one temporal dimension. For colluding eavesdroppers, we identify the spatial coverage condition under which artificial noise (AN) keeps their SINR bounded as data and AN powers increase together. We jointly optimize the private beams, tag beam, and AN covariance to minimize transmit power under authentication, secrecy, and per-HAPS power constraints. The method combines semidefinite relaxation (SDR), exact private-beam rank reduction, and feasible successive convex approximation. A corrected dual lower bound measures the remaining optimality gap. Numerical results show that increasing the tag length from 16 to 64 symbols reduces the required tag SINR by 7.16 dB. Joint beam design reduces mean transmit power by 27.4% relative to an optimized fixed-tag-direction baseline. The authentication guarantee requires fresh secret tags and excludes relays of the current response.

0.27

Secrecy Performance of an Artificial Noise Aided Dual-Hop SWIPT MIMO-NOMA Network in Presence of Practical Impairments

eess.SP ·2026-10-02 ·Büşra Demirkol, Oğuz Kucur, Güneş Karabulut Kurt
similarity 0.60
Abstract

This paper investigates the secrecy performance of a cooperative non-orthogonal multiple access (NOMA) network under practical impairments. In the considered system, the source employs orthogonal space-time block coding (OSTBC) transmission, legitimate users adopt receive antenna selection (RAS), and the eavesdropper utilizes maximal-ratio combining (MRC) scheme. Moreover, an energy-constrained amplify-and-forward relay harvests energy from the received signal and allocates the harvested energy to information forwarding and artificial noise (AN) generation. To capture the realistic performance of a more practical transmission scenario, channel estimation errors (CEE), feedback delay (FBD), imperfect successive interference cancellation (SIC), and imperfect AN cancellation are taken into account. For this system, closed-form expressions for the legitimate-user signal-to-interference+noise ratios (SINR) cumulative distribution function (CDF) and the eavesdropper SINR probability density function (PDF) are derived, and a tractable analytical secrecy outage probability (SOP) expressions are obtained. In addition, the high-SNR secrecy behavior is characterized under ideal channel state information (CSI) conditions and practical impairments, revealing the achievable secrecy diversity order and the secrecy outage floor, respectively. Moreover, secrecy throughput and energy efficiency are analyzed based on the obtained SOP results. The numerical findings are in close agreement with the analytical results and further illustrate how the secrecy behavior of the proposed system is affected by key design parameters and practical impairments. The obtained results indicate that transmit and receive diversity and proper AN power allocation significantly improve the secrecy performance, whereas practical impairments lead to non-zero SOP floors in the high signal-to-noise ratio region.

0.17

Joint Beamforming and Duplex-Mode Segment Selection for Secure Uplink Transmission in Pinching Antenna Systems

eess.SP ·2026-11-10 ·Zar Chi Phyo, Mohamed Elhattab, Chadi Assi, Sanaa Sharafeddine
benchmark similarity 0.59
Abstract · 13 pages, 8 figures, Journal submission

Pinching antenna systems (PASS) have recently emerged as a promising architecture for reconfigurable, flexible and proximity-driven signal delivery. In this paper, we propose a segmented waveguide-based PASS architecture for enabling secure uplink communications, where each segment activates at most one pinching antenna (PA), which inherently eliminates the inter-antenna re-radiation effect and yields a tractable uplink signal model. To protect the uplink transmission against eavesdropping, the base station (BS) injects artificial noise (AN) toward the eavesdroppers via selected downlink segments using a duplex-mode segment selection mechanism, which dynamically configures each segment for either uplink reception or downlink AN transmission through switch-controlled fiber connections. We formulate the secrecy energy efficiency (SEE) maximization problem as a mixed-integer nonlinear program (MINLP) that jointly optimizes the receive beamforming vector, AN covariance, user transmit power, pinching antenna positions, and duplex-mode segment assignment. Given the non-convex and combinatorial nature of the problem, we develop an efficient alternating optimization (AO) framework, where the resulting subproblems are solved using the Dinkelbach method combined with successive convex approximation (SCA) and penalty-based relaxation. Simulation results demonstrate that the proposed framework significantly outperforms benchmark schemes in terms of SEE and robustness against waveguide attenuation. Moreover, AN effectively suppresses information leakage, while PA mobility, duplex-mode segment allocation, and waveguide segmentation further improve secrecy performance through flexible positioning and reduced in-waveguide propagation loss.

0.19

Harvesting-Aware Routing for Low-Latency Reliable Transmission in Interference-Powered Networks

cs.NI ·2026-10-09 ·Azadeh Sheikholeslami, Allan Nguyen
similarity 0.59
Abstract

We consider a multi-hop wireless network where energy-harvesting nodes rely solely on ambient radio-frequency interference as their power source. The goal is to deliver a packet from source to destination with minimum latency while guaranteeing a target end-to-end outage probability under Rayleigh fading. This gives rise to a joint routing and power allocation problem in which interference plays a dual role: it provides harvestable energy, but also impairs link reliability. We first transform the intricate, multiplicative end-to-end outage constraint into an additive form. Then, we propose two optimal algorithms. The first, HOPE, minimizes the bottleneck harvesting latency, i.e., the longest energy-accumulation time along the path, by reducing the problem to a least-cost path computation on a graph with interference-aware link weights. The second, THOPE, extends the objective to total end-to-end latency, adding the cumulative transmission delay, and likewise admits a closed-form least-cost path solution. Both algorithms are solved in polynomial time via Dijkstra's algorithm and yield explicit expressions for the optimal transmit powers. Extensive simulations reveal that HOPE and THOPE reduce the average total latency by up to an order of magnitude compared with shortest-path and minimum-energy benchmarks, while exhibiting sharply concentrated delay distributions that are largely insensitive to interferer density.

0.23

Performance Analysis of HAPS-Assisted Downlink RSMA under Orthogonal and Full Frequency Reuse

eess.SP ·2026-09-15 ·Farjam Karim, Prathapasinghe Dharmawansa, Nurul Huda Mahmood, Matti Latva-aho
similarity 0.59
Abstract

This paper analyzes the outage performance of a high-altitude platform station (HAPS)-assisted downlink employing rate-splitting multiple access (RSMA). A realistic link budget accounting for free-space path loss, rain attenuation, and atmospheric absorption is combined with elevation-angle-dependent shadowed Rician fading. Closed-form outage probability and throughput expressions are derived for orthogonal frequency allocation and full frequency reuse, where the aggregate inter-beam interference is approximated by a moment-matched Gamma random variable, yielding a tractable finite-sum expression via its Laplace transform. The analytical expressions are validated through Monte Carlo simulations, showing close agreement. Numerical results show that the optimal common stream power allocation depends on the transmit power, while inter-beam interference under frequency reuse introduces an outage floor absent under orthogonal allocation, providing practical design insights for HAPS-RSMA systems

0.22

Reliability Analysis for Ground-Air Cooperative Wireless-Powered Internet-of-Things

cs.IT ·2026-11-07 ·Xingyu Huang, Zhican Zhong, Yulei Wang, Yalin Liu, Yongqiang Cui +1 more
similarity 0.58
Abstract · 7 pages, 6 figures

Battery-constrained Internet of Things (IoT) devices face significant challenges in maintaining long-term uplink data collection, especially in network-limited scenarios. This paper investigates a Ground-Air cooperative Wireless-Powered IoT network (GA-WPIoT), where ground power beacons (GPBs) provide radio-frequency energy supply and unmanned aerial vehicles (UAVs) serve as flexible aerial access points for IoT data collection. Unlike conventional UAV-enabled wireless-powered solutions, GA-WPIoT decouples energy transfer and data collection, reducing the hardware and energy burden of UAVs. To capture the device-level performance variations among IoT devices, we develop a stochastic geometry-based analytical framework, where UAVs are modeled by a Matérn hard-core point process, IoT devices by a Poisson point process, and GPBs by a finite annular binomial point process. The conditional success probabilities of the GPB-device link (for energy transfer) and the device-UAV link (for data collection) are characterized, and device-level reliability distributions are obtained through the Meta-Distribution based analysis. Numerical results under suburban and urban environments reveal the impacts of UAV altitude and annular GPB deployment on reliability distributions, providing useful guidelines for GA-WPIoT.

0.25

Fundamentals of Energy-Efficient Hardware Configurations for Wireless Links with Sleep Modes

cs.IT ·2026-09-10 ·Anders Enqvist, Özlem Tuğfe Demir, Cicek Cavdar, Emil Björnson
published similarity 0.57
Abstract · 13 pages, 8 figures. A preliminary version was presented at IEEE VTC2024-Spring

In this paper, we examine the energy efficiency (EE) of a base station (BS) with multiple antennas. We use a state-of-the-art power consumption (PC) model that captures the passive and active parts of the transceiver circuitry, including the effects of radiated power, signal processing, and passive consumption. The paper treats the transmit power, bandwidth, and number of antennas as the optimization variables. We provide novel closed-form solutions for the optimal ratios of power per unit bandwidth and power per transmit antenna, and discover a new relationship in which the radiated power equals the total transceiver power at the EE-optimal operating point. A central finding is that the EE-optimal signal-to-noise ratio (SNR) collapses to a universal numerical constant of approximately 5.93 dB, independent of channel and hardware parameters. We present an algorithm that jointly optimizes the three design variables to achieve maximum EE under practical constraints, and provide analytical insight into whether maximum power or maximum bandwidth is optimal and how many antennas a BS should utilize. We further extend the optimization framework to incorporate quality-of-service (QoS) requirements and three advanced sleep modes of varying depth: absolute sleep, deep sleep, and idle mode. We characterize the optimal hardware configuration for each mode and determine when the rush-to-sleep strategy, which transmits briefly at the EE-optimal active configuration and sleeps the rest of the time, is optimal. Incorporating wake-up transition delays, we reveal how latency constraints and sleep-mode-specific transition times jointly dictate the optimal sleep mode for data packets with absolute deadlines. Together, these results indicate that energy-efficient operation requires treating transmission and sleep as a single coupled optimization.

0.58