CS Paper Radar

Harvesting-Aware Routing for Low-Latency Reliable Transmission in Interference-Powered Networks

Azadeh Sheikholeslami, Allan Nguyen

cs.NI ·submitted 2026-10-09 19:13 UTC · v1

Abstract

We consider a multi-hop wireless network where energy-harvesting nodes rely solely on ambient radio-frequency interference as their power source. The goal is to deliver a packet from source to destination with minimum latency while guaranteeing a target end-to-end outage probability under Rayleigh fading. This gives rise to a joint routing and power allocation problem in which interference plays a dual role: it provides harvestable energy, but also impairs link reliability. We first transform the intricate, multiplicative end-to-end outage constraint into an additive form. Then, we propose two optimal algorithms. The first, HOPE, minimizes the bottleneck harvesting latency, i.e., the longest energy-accumulation time along the path, by reducing the problem to a least-cost path computation on a graph with interference-aware link weights. The second, THOPE, extends the objective to total end-to-end latency, adding the cumulative transmission delay, and likewise admits a closed-form least-cost path solution. Both algorithms are solved in polynomial time via Dijkstra's algorithm and yield explicit expressions for the optimal transmit powers. Extensive simulations reveal that HOPE and THOPE reduce the average total latency by up to an order of magnitude compared with shortest-path and minimum-energy benchmarks, while exhibiting sharply concentrated delay distributions that are largely insensitive to interferer density.

Closest papers

Nearest neighbours by meaning across the whole index.

Latency-Aware Uplink NOMA-MEC with PASS: A Feasibility-First Resource Allocation Framework

cs.IT ·2026-10-13 ·Sepehr Abolhasani, Saba Asaad, S. Mohammad Razavizadeh, Jiguang He
published similarity 0.61
Abstract · 6 pages, Accepted at IEEE GLOBECOM 2026 Workshops (PASS for NGWC)

Meeting hard task-completion deadlines for many simultaneously offloading users is the binding challenge in mobile-edge computing (MEC). As the user count grows, the transmit power required to satisfy every deadline within per-user budgets rises until no feasible allocation exists. We take a \emph{feasibility-first} view of this $K$-user problem in an uplink non-orthogonal multiple access (NOMA) MEC system served by a pinching-antenna system (PASS), whose radiating points establish strong line-of-sight (LoS) links that lower the received-power requirement. We formulate a latency-constrained joint optimization of transmit powers, CPU frequencies, and antenna configuration. We then derive a \emph{closed-form least-power feasibility test}: the componentwise-least allocation meeting every deadline. It certifies feasibility with the largest attainable margin to the power budgets and defines a practical \emph{quality-of-service (QoS)-feasibility outage} metric, the probability that no allocation meets all deadlines within budget. We solve the problem with a three-block alternating-optimization algorithm that is provably monotone-convergent and has polynomial complexity. Numerical results show that the proposed scheme sustains deadline feasibility at user loads where equal-power, orthogonal multiple access (OMA), and single-antenna baselines fail or degrade sharply, each by a mechanism predicted directly from the system model, whereas the proposed design degrades gracefully. Stress tests further show that feasibility is sustained under order-of-magnitude budget reductions, and that the pinching-antenna array itself enables constrained-budget operation. The result is a scalable, closed-form-initialized design for deadline-feasible offloading.

0.40

Distributed Cross-Layer Optimization for Covert Multi-Hop, Multi-Modal Networks: Exponentially Fast Convergence and Robust Tracking

cs.IT eess.SP ·2026-08-28 ·Sirin Chakraborty, Andrea Panebianco, Yuchen Tian, Kevin S Chan, Fikadu Dagefu +2 more
publishedtheory similarity 0.60
Abstract · 18 pages, 6 figures. Full technical report corresponding to the paper accepted to IEEE MILCOM 2026

This paper develops the first distributed cross-layer algorithm for joint congestion control, routing, scheduling, and power control in covert multi-hop, multi-modal wireless networks, where adversarial wardens (Willies) monitor radio modalities via energy detection. The Detection Error Probability (DEP), the probability that a Willie fails to reliably detect ongoing transmissions, is generally non-concave in the transmit powers, making DEP-based covert network optimization challenging. We resolve this by constructing the tightest concave lower bound on the log-DEP, yielding a conservative convex problem that guarantees satisfaction of the original DEP constraints and unifies hard covertness constraints and covertness-utility maximization in a single problem. We develop a Parallel Proximal Alternating Direction Method of Multipliers (PP-ADMM) algorithm for the resulting cross-layer problem and prove global Q-linear convergence, i.e., exponentially fast convergence, to the set of optimal solutions under standard regularity conditions. Numerical results confirm linear convergence and demonstrate robust tracking performance under channel fading and Willie mobility.

0.32

Tags Helping Tags: Coordination-Free Power Boosting for Battery-less Backscatter Networks

eess.SY eess.SP ·2026-11-05 ·Mathew Salas, Xin Xiong, Sihua Shao, Atef Elsherbeni, Mostafa Hassanalian +1 more
similarity 0.59
Abstract

Battery-less backscatter sensor nodes powered by radio-frequency wireless power transfer are attractive for large or hard-to-reach deployments, but their range is typically limited by the forward power-transfer link rather than by communication sensitivity. We present a method for improving power delivery, and thus range, in dense tag deployments by having nearby tags act as helpers: each helper terminates its antenna in purely reactive impedances, reflecting the power beacon's signal toward a target tag so that it combines constructively with the direct line-of-sight path and increases the power the target harvests. On a hardware testbed, helpers using discrete impedance control are shown to increase the target tag's harvested power by over 50% above an all-absorbing baseline, while randomly set helper impedances give no reliable benefit, and are sometimes even detrimental. We further propose and implement a local algorithm that lets each helper tune its own impedance using only measurements of the target's packet rate, without channel estimation or coordination between helpers, and we show that it brings the target's packet rate close to that of an independently tuned configuration. These results suggest that independent, passive sensor nodes can cooperatively extend each other's power-transfer range with minimal added infrastructure.

0.31

Secure Wireless Information Transfer and Energy Harvesting in HAPS-Based Network

cs.IT eess.SY ·2026-08-23 ·Khaled Humadi, Gunes Karabulut-Kurt, Wessam Ajib, Wei-Ping Zhu
published similarity 0.59
Abstract

High-altitude platform station (HAPS) serves as a promising enabler for wide-area connectivity of low-power wireless devices, particularly in remote and underserved regions. However, the strong line-of-sight characteristics of HAPS links increase the risk of eavesdropping, while the limited energy budget of ground devices remains a major operational constraint. In this work, we propose a secure wireless information and energy harvesting framework for HAPS-based networks in the presence of spatially distributed eavesdroppers. The proposed system integrates friendly jamming and power transfer nodes equipped with null-steering capability antennas, such that they not only degrade the reception quality at eavesdroppers but also act as additional radio-frequency energy sources for legitimate users. A time-switching wireless information and power transfer architecture is adopted at the user side. Under this framework, we derive tractable expressions for the joint rate-energy coverage and the average secrecy rate using stochastic geometry tools. Numerical and Monte Carlo results validate the developed analysis and reveal key design trade-offs among the time allocation factor, null-steering-zone radius around each user, and jammer transmit power. In particular, the results show that properly coordinated null-steering jamming can simultaneously support secure communication and adequate wireless power transfer, while an appropriate choice of system parameters, such as time allocation factor and jamming power, is required to balance harvested energy, communication reliability, and secrecy performance.

0.31

Minimizing Energy Consumption based on Waste Factor in Multi-user Multi-relay Systems

eess.SP ·2026-10-03 ·Nurullah Sevim, Mostafa Ibrahim, Sabit Ekin, Theodore S. Rappaport
similarity 0.58
Abstract · Submitted to IEEE Transactions on Green Communications and Networking for review

The escalating energy demands of modern wireless networks make energy-efficient system design a central challenge for future 6G deployments. Relay-assisted communication has long been recognized as a powerful tool for improving coverage and throughput, tracing its roots to early repeater communication systems and the foundational relay channel models in information theory. Meanwhile, modern relay selection and routing strategies are primarily driven by rate-based or transmit-power-centric metrics, which often neglect hardware-level losses that is independent of the transmitted signal. As networks grow denser and more heterogeneous, signal-independent hardware inefficiencies and circuit power consumption increasingly dominate the total energy consumption and fundamentally alter the optimality of relay assignment decisions. To address the challenge of modeling signal-independent power consumption in relay-assisted systems, the Waste Factor (WF) framework is adopted: a hardware-aware, unifying metric that explicitly captures signal-independent power losses across cascaded transceivers and wireless channels. Using WF, the energy consumption of multi-user, multi-relay wireless systems is quantified and minimized under practical hardware and network constraints. The formulation jointly accounts for component inefficiencies, propagation losses, and relay-selection constraints. The proposed framework demonstrates that the WF formulation provides a fundamentally new way to model relay-assisted communication, enabling hardware-aware energy-per-bit minimization and a structured representation that enables computationally efficient analysis. Simulation results confirm that WF-based relay assignment reduces total energy per bit while improving the ability of users to satisfy minimum received-power requirements, outperforming conventional formulations across both metrics.

0.26

Throughput Maximization for MapReduce-Based Collaborative Computing over Energy-Harvesting Wireless Devices

eess.SY cs.DC ·2026-08-26 ·Yuhang Li, Siqi Sun, Hongen Zheng, Xiaojing Chen, Shunqing Zhang +1 more
published similarity 0.57
Abstract

This paper studies resource allocation for MapReduce-based collaborative computing over heterogeneous wireless devices powered by renewable energy harvesting. We formulate a long-run average throughput maximization problem that jointly optimizes computing load, phase time allocations, transmit power, and per-device energy consumption, subject to battery evolution, CPU frequency, and latency constraints. To solve this problem online without prior knowledge of channel states or energy arrivals, we propose a DDPG-CVX algorithm that couples Deep Deterministic Policy Gradient (DDPG) with convex programming. DDPG determines the per-slot energy budget for each device from observed battery and channel states; the remaining resource allocation variables are then resolved to global optimality by an embedded convex solver. This two-phase decomposition reduces the action-space dimensionality of DDPG while preserving per-slot solution quality. Simulations show that DDPG-CVX achieves 1.25$\times$$\sim$32.36$\times$ the throughput of representative benchmarks.

0.24

Joint Transmit Power and Reflection Coefficient Optimization for Underlay Cognitive Radio Ambient Backscatter Communication

eess.SP ·2026-10-31 ·Chabalala S. Chabalala, Peter Odero Akuon, Zhen Gao
theory similarity 0.57
Abstract · Ambient backscatter communication (AmBC), cognitive radio networks (CRNs), interference management, outage performance, power reflection coe…

The integration of cognitive radio (CR) technology with backscatter communication offers a promising solution for developing spectrum-efficient and low-power wireless networks. In this paper, we investigate the performance of an underlay cognitive radio ambient backscatter communication (CR-AmBC) system operating under primary network (PN) interference constraints. The objective is to maximize the performance of the CR-AmBC system while protecting the PN from interference. Differing from prior work, our formulation jointly accounts for: (i) interference from the PN on the CR receivers, (ii) interference from the backscatter device (BD) on the PN receiver, and (iii) imperfect successive interference cancellation (i-SIC) at the secondary destination. We propose a joint transmit power and reflection coefficient optimization framework that incorporates the minimum data rate requirements, the PN interference constraint, and i-SIC for decoding the BD signal. The nonconvex problem is decomposed into two subproblems solved via alternating optimization: (a) a closed-form expression for the feasible transmit power given a fixed reflection coefficient, and (b) an efficient one-dimensional search for the reflection coefficient. We prove that the power update is optimal, reducing the joint problem to a one-dimensional search, with monotone convergence and $\mathcal{O}(KN_β)$ complexity for $K$ iterations and $N_β$ search points. We present a comprehensive simulation-based performance evaluation and the results demonstrate that the proposed joint transmission power and reflection coefficient optimization provides an effective strategy to maximize the performance of the CR-AmBC system without violating the PN protection constraints.

0.07

Energy Efficiency Maximization for Integrated Sensing and Communication in IoT C-RAN

eess.SP ·2026-10-14 ·Le Tung Giang, Nguyen Xuan Tung, Trinh Van Chien, Chau Yuen, Won-Joo Hwang
publishedtheory similarity 0.57
Abstract · 16 pages, 5 figures, and 7 tables. Published in IEEE IOTJ

Integrated sensing and communication (ISAC) with cloud radio access networks (C-RAN) unifies two foundational technologies for the Internet of Things (IoT), enabling both high-data-rate transmission and accurate environmental awareness. This paper investigates an uplink C-RAN system where multiple remote radio units (RRUs) jointly serve user equipment devices (UEs) and sense a target. We demonstrate that only a subset of RRUs is typically needed to meet sensing requirements, while energy is potentially conserved by deactivating redundant sensing RRUs. Motivated by this, we aim to improve the system's energy efficiency (EE) by jointly optimizing RRU activation, user association, and power allocation, while ensuring localization accuracy through the Cramér-Rao lower bound (CRLB). To address this problem, we propose a model-based iterative algorithm that integrates optimal user association, decision tree-based selection of sensing RRUs, and fixed-point power allocation. This algorithm is further used to train a graph neural network (GNN) framework, ISAC-GNN, to overcome scalability and computational complexity limitations. Our theoretical analysis ensures performance guarantees, while a semi-supervised training strategy enhances stability and generalization. Simulation results demonstrate that ISAC-GNN reduces inference time by 67% relative to the model-based approach, enabling real-time implementation for ISAC system resource management. In addition, ISAC-GNN allows scalable deployment across various system scenarios without retraining the model.

0.53