CS Paper Radar

Minimizing Energy Consumption based on Waste Factor in Multi-user Multi-relay Systems

Nurullah Sevim, Mostafa Ibrahim, Sabit Ekin, Theodore S. Rappaport

eess.SP ·submitted 2026-10-03 16:14 UTC · v1

Abstract

The escalating energy demands of modern wireless networks make energy-efficient system design a central challenge for future 6G deployments. Relay-assisted communication has long been recognized as a powerful tool for improving coverage and throughput, tracing its roots to early repeater communication systems and the foundational relay channel models in information theory. Meanwhile, modern relay selection and routing strategies are primarily driven by rate-based or transmit-power-centric metrics, which often neglect hardware-level losses that is independent of the transmitted signal. As networks grow denser and more heterogeneous, signal-independent hardware inefficiencies and circuit power consumption increasingly dominate the total energy consumption and fundamentally alter the optimality of relay assignment decisions. To address the challenge of modeling signal-independent power consumption in relay-assisted systems, the Waste Factor (WF) framework is adopted: a hardware-aware, unifying metric that explicitly captures signal-independent power losses across cascaded transceivers and wireless channels. Using WF, the energy consumption of multi-user, multi-relay wireless systems is quantified and minimized under practical hardware and network constraints. The formulation jointly accounts for component inefficiencies, propagation losses, and relay-selection constraints. The proposed framework demonstrates that the WF formulation provides a fundamentally new way to model relay-assisted communication, enabling hardware-aware energy-per-bit minimization and a structured representation that enables computationally efficient analysis. Simulation results confirm that WF-based relay assignment reduces total energy per bit while improving the ability of users to satisfy minimum received-power requirements, outperforming conventional formulations across both metrics.

Comment
Submitted to IEEE Transactions on Green Communications and Networking for review

Closest papers

Nearest neighbours by meaning across the whole index.

Energy Efficiency Optimization for 5G NR PDSCH: A Cross-Layer Link Abstraction Framework

eess.SP ·2026-10-04 ·Jaebum Park, Chan-Byoung Chae, Robert W. Heath
similarity 0.62
Abstract · 6 pages, 4 figures

Energy efficiency (EE) optimization for cellular links often assumes Shannon-capacity transmission. The 3GPP New Radio (NR) physical downlink shared channel (PDSCH), however, delivers a transport block whose size is fixed by the modulation and coding scheme (MCS), the rank, and the resource allocation chosen by the scheduler. The transport block must also meet a target block error rate (BLER). In this paper, we optimize EE for the NR PDSCH with the standard transport block size as the throughput and the target BLER as the constraint. Exponential effective signal-to-noise ratio (SNR) mapping (EESM) turns the BLER constraint into a convex per-subcarrier power constraint. We derive a closed-form waterfilling-like power allocation and an EE-maximizing MCS selection rule. With a single calibration parameter per MCS, fitted offline over 3GPP tapped delay line C (TDL-C) channels, EESM predicts the BLER without per-realization link-level simulation. Numerical results show that a Shannon-capacity baseline overestimates the EE of equal-power transmission by 1.5 to 1.7 times at high SNR within the transmit power budget.

0.26

Learning to Maximize Energy Efficiency in 6G in-X Subnetworks

eess.SP cs.NI ·2026-09-21 ·Ramoni Adeogun
published similarity 0.59
Abstract · Accepted in IEEE VTC Fall 2026

This paper investigates energy-efficient power control in 6G in-X subnetworks. We consider a graph neural network (GNN) framework that captures inter-subnetwork interference and the underlying wireless topology to optimize transmit powers. Three energy efficiency (EE) formulations are studied: (i) network-centric, which maximizes total network energy efficiency; (ii) subnetwork-centric, which maximizes the average energy efficiency per subnetwork; and (iii) a multi-objective approach, which balances energy efficiency and sum-rate performance. Extensive simulations in industrial factory settings with 3GPP channel models demonstrate that the GNN effectively learns interference-aware power allocation policies, significantly outperforming maximum power transmission and existing GNN based power control solution. Results showed network EE gains of up to 1341%, average per-device EE improvements of up to 1302%, and sum-rate enhancements up to 24.7% relative to a maximum transmit power policy, depending on the chosen optimization formulation and trade-off settings.

0.29

Fundamentals of Energy-Efficient Hardware Configurations for Wireless Links with Sleep Modes

cs.IT ·2026-09-10 ·Anders Enqvist, Özlem Tuğfe Demir, Cicek Cavdar, Emil Björnson
published similarity 0.59
Abstract · 13 pages, 8 figures. A preliminary version was presented at IEEE VTC2024-Spring

In this paper, we examine the energy efficiency (EE) of a base station (BS) with multiple antennas. We use a state-of-the-art power consumption (PC) model that captures the passive and active parts of the transceiver circuitry, including the effects of radiated power, signal processing, and passive consumption. The paper treats the transmit power, bandwidth, and number of antennas as the optimization variables. We provide novel closed-form solutions for the optimal ratios of power per unit bandwidth and power per transmit antenna, and discover a new relationship in which the radiated power equals the total transceiver power at the EE-optimal operating point. A central finding is that the EE-optimal signal-to-noise ratio (SNR) collapses to a universal numerical constant of approximately 5.93 dB, independent of channel and hardware parameters. We present an algorithm that jointly optimizes the three design variables to achieve maximum EE under practical constraints, and provide analytical insight into whether maximum power or maximum bandwidth is optimal and how many antennas a BS should utilize. We further extend the optimization framework to incorporate quality-of-service (QoS) requirements and three advanced sleep modes of varying depth: absolute sleep, deep sleep, and idle mode. We characterize the optimal hardware configuration for each mode and determine when the rush-to-sleep strategy, which transmits briefly at the EE-optimal active configuration and sleeps the rest of the time, is optimal. Incorporating wake-up transition delays, we reveal how latency constraints and sleep-mode-specific transition times jointly dictate the optimal sleep mode for data packets with absolute deadlines. Together, these results indicate that energy-efficient operation requires treating transmission and sleep as a single coupled optimization.

0.58

Energy-Aware Compression-Computation Co-Adaptation for Latency Minimization in Multi-User Semantic Communication

cs.IT cs.ETcs.NI ·2026-08-13 ·Loc X. Nguyen, Yumin Park, Avi Deb Raha, Huy Q. Le, Zhu Han +2 more
similarity 0.58
Abstract · 13 pages, 7 figures, 5 tables

Deep joint source-channel coding-enabled (DeepJSCC) semantic communication (SemCom) has excelled at delivering high perceptual quality at low channel-bandwidth ratios, which positions it as a pillar for next-generation wireless networks. However, the existing works have difficulty accommodating user heterogeneity in terms of communication channel quality, expected quality-of-service (QoS) targets, and the available local energy. Therefore, in this paper, we explicitly reflect the heterogeneity of user devices in terms of the differences in expected QoS, channel condition, and local energy, and then mathematically formulate the problem. Next, we propose an energy-aware compression-computation co-adaptation (CoCo) framework, in which the base station can meet the expected user QoS by transmitting a longer signal or offloading the task to a local device. The user has to dedicate energy to denoising the signal to recover higher-fidelity latent features before feeding it to the semantic decoder. To solve the formulated problem, we first decompose it into two sub-problems: parameter optimization and resource allocation problems. Specifically, we propose a robust codec that effectively works under a diversity of compression rates and channel noise without re-training, while the greedy sub-carrier allocation lowers the communication time. Finally, we present simulation results on standard image datasets over additive white Gaussian noise to demonstrate the effectiveness of CoCo, which reduces total latency relative to rate-only adaptive DeepJSCC or denoising-only, thereby ensuring the demands of each individual user are met.

0.10

Throughput Maximization for MapReduce-Based Collaborative Computing over Energy-Harvesting Wireless Devices

eess.SY cs.DC ·2026-08-26 ·Yuhang Li, Siqi Sun, Hongen Zheng, Xiaojing Chen, Shunqing Zhang +1 more
published similarity 0.58
Abstract

This paper studies resource allocation for MapReduce-based collaborative computing over heterogeneous wireless devices powered by renewable energy harvesting. We formulate a long-run average throughput maximization problem that jointly optimizes computing load, phase time allocations, transmit power, and per-device energy consumption, subject to battery evolution, CPU frequency, and latency constraints. To solve this problem online without prior knowledge of channel states or energy arrivals, we propose a DDPG-CVX algorithm that couples Deep Deterministic Policy Gradient (DDPG) with convex programming. DDPG determines the per-slot energy budget for each device from observed battery and channel states; the remaining resource allocation variables are then resolved to global optimality by an embedded convex solver. This two-phase decomposition reduces the action-space dimensionality of DDPG while preserving per-slot solution quality. Simulations show that DDPG-CVX achieves 1.25$\times$$\sim$32.36$\times$ the throughput of representative benchmarks.

0.24

Harvesting-Aware Routing for Low-Latency Reliable Transmission in Interference-Powered Networks

cs.NI ·2026-10-09 ·Azadeh Sheikholeslami, Allan Nguyen
similarity 0.58
Abstract

We consider a multi-hop wireless network where energy-harvesting nodes rely solely on ambient radio-frequency interference as their power source. The goal is to deliver a packet from source to destination with minimum latency while guaranteeing a target end-to-end outage probability under Rayleigh fading. This gives rise to a joint routing and power allocation problem in which interference plays a dual role: it provides harvestable energy, but also impairs link reliability. We first transform the intricate, multiplicative end-to-end outage constraint into an additive form. Then, we propose two optimal algorithms. The first, HOPE, minimizes the bottleneck harvesting latency, i.e., the longest energy-accumulation time along the path, by reducing the problem to a least-cost path computation on a graph with interference-aware link weights. The second, THOPE, extends the objective to total end-to-end latency, adding the cumulative transmission delay, and likewise admits a closed-form least-cost path solution. Both algorithms are solved in polynomial time via Dijkstra's algorithm and yield explicit expressions for the optimal transmit powers. Extensive simulations reveal that HOPE and THOPE reduce the average total latency by up to an order of magnitude compared with shortest-path and minimum-energy benchmarks, while exhibiting sharply concentrated delay distributions that are largely insensitive to interferer density.

0.23

Mobile Backscatter Communication for the Battery-less Internet of Things

cs.NI ·2026-09-01 ·Weining Song, Thiemo Voigt, Stefanos Kaxiras, Yuan Yao, Luca Mottola
published similarity 0.57
Abstract · 11 pages, 20 figures. Extended version of the paper accepted at MSWiM 2026

We enable backscatter communication in the battery-less mobile Internet of Things (IoT). Backscatter communication is extensively studied in static settings. Existing designs are, however, fundamentally mismatched with mobility and time-varying energy patterns. Channel conditions rapidly fluctuate, impacting the achievable data rates and thus transmission costs. Energy availability varies unpredictably, possibly forcing devices to remain quiescent to recharge energy buffers. The two issues compound each other: while recharging, a battery-less mobile IoT device may miss more favorable channel conditions. We design a lightweight decision system that dynamically determines when to transmit by checking short-term trends in signal strength, while using Non-volatile Memory (NVM) to retain packets in unfavorable channel conditions and across energy failures. Using a prototype we built and real-world mobility and power traces, we compare our design against a rate-adaptive baseline that only considers the instantaneous channel conditions. Experimental results show that our system improves throughput by up to 5.16x while reducing transmission energy consumption by up to 47.3%, with only 0.23% - 7.3% additional energy overhead.

0.40

Hybrid STAR-RIS Architecture for Joint Localization, Communication, and Power Transfer

eess.SP ·2026-08-12 ·Haoran Ni, Mohammadali Mohammadi, Xidong Mu, Hien Quoc Ngo, Michail Matthaiou
top venue similarity 0.57
Abstract · Accepted for publication in IEEE Transactions on Wireless Communications, Aug. 2026

We propose a hybrid simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) architecture with dynamically switched active and passive elements to support joint localization, communication, and wireless power transfer (WPT). We first pursue a parallel factor analysis with the alternating least squares (PARAFAC-ALS)-based tensor decomposition approach that decouples the base station (BS)-reconfigurable intelligent surface (RIS) and RIS-user channels, thereby enabling low-overhead channel acquisition. Based on this, we formulate a system energy efficiency (EE) maximization problem, subject to the spectral efficiency (SE) requirements of communication users, sensing signal-to-interference-plus-noise ratio constraints, and the nonlinear energy harvesting requirements of energy-harvesting users. The optimization problem is nonconvex since the transmit power allocation, STAR-RIS coefficients, and active/passive mode assignments are tightly coupled in both the objective and constraints. We address this issue by alternating between two subproblems, and solving them via fractional programming, successive convex approximation and a multi-seed greedy strategy employed as an initialization step. Numerical results demonstrate that selectively activating a small, well-chosen subset of STAR-RIS elements achieves 1.5 to 3 times EE improvements compared with fully passive/active architectures, while satisfying communication, sensing, and power-transfer requirements.

0.63