CS Paper Radar

Mobile Backscatter Communication for the Battery-less Internet of Things

Weining Song, Thiemo Voigt, Stefanos Kaxiras, Yuan Yao, Luca Mottola

cs.NI ·submitted 2026-09-01 16:03 UTC · v3
published

Abstract

We enable backscatter communication in the battery-less mobile Internet of Things (IoT). Backscatter communication is extensively studied in static settings. Existing designs are, however, fundamentally mismatched with mobility and time-varying energy patterns. Channel conditions rapidly fluctuate, impacting the achievable data rates and thus transmission costs. Energy availability varies unpredictably, possibly forcing devices to remain quiescent to recharge energy buffers. The two issues compound each other: while recharging, a battery-less mobile IoT device may miss more favorable channel conditions. We design a lightweight decision system that dynamically determines when to transmit by checking short-term trends in signal strength, while using Non-volatile Memory (NVM) to retain packets in unfavorable channel conditions and across energy failures. Using a prototype we built and real-world mobility and power traces, we compare our design against a rate-adaptive baseline that only considers the instantaneous channel conditions. Experimental results show that our system improves throughput by up to 5.16x while reducing transmission energy consumption by up to 47.3%, with only 0.23% - 7.3% additional energy overhead.

Comment
11 pages, 20 figures. Extended version of the paper accepted at MSWiM 2026

Closest papers

Nearest neighbours by meaning across the whole index.

WiFi Backscatter for Green Internet of Things: Concepts, Research Trends, and Practical Challenges

cs.NI ·2026-09-28 ·Weiqi Wu, Shuo Wang, Zhaoyuan Xu
survey similarity 0.68
Abstract

WiFi backscatter has emerged as a promising technology for green Internet of Things (IoT) connectivity by enabling battery-free devices to communicate through widely available WiFi signals. Despite substantial progress in recent years, a considerable gap remains between research prototypes and practical deployment. This paper provides an overview of WiFi backscatter from the perspective of practical and green IoT systems. We first introduce the fundamentals and key enabling techniques, together with potential IoT applications. We then outline recent research trends toward higher throughput, concurrent communication, simplified deployment, commercial compatibility, and joint communication and sensing. Furthermore, we identify the key challenges that still hinder practical deployment, such as limited transmitter-to-tag operating range and packet loss in frequency-shifted backscatter. We believe that addressing these challenges will be critical to enabling WiFi backscatter to become a practical communication technology for future green IoT systems.

0.15

Energy-Accumulate-Then-Act Backscatter Communications With Retransmission Under Imperfect Feedback Detection

cs.IT ·2026-11-04 ·Rui Xu, Yinghui Ye, Guangyue Lu, Liqin Shi, Gan Zheng
similarity 0.67
Abstract

In this paper, we propose a threshold-triggered energy-accumulate-then-act backscatter communication system with retransmission under imperfect feedback detection. Under this system, harvested energy is accumulated across transmission blocks, and the backscatter device switches among different operation modes, including energy harvesting, initial transmission, and retransmission, according to its stored energy and decoded feedback. To characterize the resulting dynamics, the joint evolution of the packet-buffer and stored-energy states is modeled, based on which an embedded Markov chain is constructed to derive the steady-state energy distribution at the beginning of each update cycle. Subsequently, the average age of information (AAoI) is derived from the statistics of the inter-update interval and its correlation with the preceding packet system time, while the packet loss rate (PLR) caused by imperfect feedback detection is also obtained. Simulation results validate the analytical results and reveal that retransmission reduces PLR but may either improve or degrade AAoI, depending on packet-generation energy, data transmission rate, and feedback power. Moreover, lower feedback power shrinks the AAoI-favorable region of retransmission at low transmission rate, whereas the opposite trend emerges at higher rate.

0.17

Energy-Efficient Timely Relevant IoT Data Retrieval with Wireless Memory Approximation

cs.NI ·2026-10-21 ·Junya Shiraishi, Zihang Song, Morten Andersen, Petar Popovski
similarity 0.63
Abstract · Submitted for possible publication

Collecting relevant data from Internet of Things devices under freshness and energy constraints is a key challenge in 6G edge networks. A lightweight neural network on the device filters irrelevant observations, but storing it in dynamic random access memory consumes refresh energy during standby. This letter proposes a pull-based framework where an edge server remotely activates and approximates memory and jointly selects the activation timing, refresh period, model size, and transmission threshold. We derive the expected freshness and energy over erasure channels in closed form and show that the scheme consumes less energy than an always-on baseline under the same freshness constraint.

0.27

Age of Information for Power-Saving Devices with DRX Mechanism

cs.NI cs.PF ·2026-11-06 ·Hung-Chun Lin, Kuang-Hsun Lin, Hung-Yu Wei
publishedtheoryhighly cited similarity 0.60
Abstract · 6 pages, 4 figures, 1 table. Published in IEEE ICC 2023

Reducing the power consumption of User Equipment (UE) has always been a crucial issue in communication systems. As a result, Discontinuous reception (DRX) is introduced in today's New Radio (NR) networks as a power-saving strategy. In addition, the variety of low latency applications in 6G makes the issue of maintaining data freshness increasingly important. This paper aims to study the relationship between freshness and power-saving. To capture the information freshness, we use Age of Information (AoI) as the performance metric. To our best knowledge, unlike previous studies focusing on power saving and delay trade-offs, this is the first study considering the impact of DRX on AoI. We solve the closed-form solution of the peak average AoI with the DRX mechanism. Moreover, we propose a parameters adjustment strategy. Based on the simulation validation, our proposed strategy can enable the UE to keep the AoI close to the theoretical lower bound AoI while achieving high power-saving efficiency.

0.64

A New Backscattering Dual-Polarized Rectenna for Wireless Power Transfer and IoT Applications

cs.CR cs.NI ·2026-09-08 ·Taki Eddine Djidjekh, Quentin Bernyer, Alexandru Takacs
published similarity 0.59
Abstract

This paper proposes an innovative dual-polarized backscattering rectenna that operates in two distinct modesenergy harvesting and backscattering modulation-driven by two-bit digital control signals. By utilizing two orthogonal (co-and cross-) polarizations, the design represents a versatile candidate for IoT applications such as battery-free wireless sensing, identification, localization, and communication. The rectenna's dual functionality is validated through its integration into a proofof-concept battery-free wireless sensor, where it operates both as an energy harvester and as a dual-polarized backscattering modulator. As a proof of concept, a 16-byte AES-128 encrypted payload is backscattered over the wireless power transfer link to enhance the resilience of a battery-free Bluetooth Low Energy (BLE) wireless sensor against replay, relay, and eavesdropping attacks.

0.45

Tags Helping Tags: Coordination-Free Power Boosting for Battery-less Backscatter Networks

eess.SY eess.SP ·2026-11-05 ·Mathew Salas, Xin Xiong, Sihua Shao, Atef Elsherbeni, Mostafa Hassanalian +1 more
similarity 0.59
Abstract

Battery-less backscatter sensor nodes powered by radio-frequency wireless power transfer are attractive for large or hard-to-reach deployments, but their range is typically limited by the forward power-transfer link rather than by communication sensitivity. We present a method for improving power delivery, and thus range, in dense tag deployments by having nearby tags act as helpers: each helper terminates its antenna in purely reactive impedances, reflecting the power beacon's signal toward a target tag so that it combines constructively with the direct line-of-sight path and increases the power the target harvests. On a hardware testbed, helpers using discrete impedance control are shown to increase the target tag's harvested power by over 50% above an all-absorbing baseline, while randomly set helper impedances give no reliable benefit, and are sometimes even detrimental. We further propose and implement a local algorithm that lets each helper tune its own impedance using only measurements of the target's packet rate, without channel estimation or coordination between helpers, and we show that it brings the target's packet rate close to that of an independently tuned configuration. These results suggest that independent, passive sensor nodes can cooperatively extend each other's power-transfer range with minimal added infrastructure.

0.31

Throughput Maximization for MapReduce-Based Collaborative Computing over Energy-Harvesting Wireless Devices

eess.SY cs.DC ·2026-08-26 ·Yuhang Li, Siqi Sun, Hongen Zheng, Xiaojing Chen, Shunqing Zhang +1 more
published similarity 0.59
Abstract

This paper studies resource allocation for MapReduce-based collaborative computing over heterogeneous wireless devices powered by renewable energy harvesting. We formulate a long-run average throughput maximization problem that jointly optimizes computing load, phase time allocations, transmit power, and per-device energy consumption, subject to battery evolution, CPU frequency, and latency constraints. To solve this problem online without prior knowledge of channel states or energy arrivals, we propose a DDPG-CVX algorithm that couples Deep Deterministic Policy Gradient (DDPG) with convex programming. DDPG determines the per-slot energy budget for each device from observed battery and channel states; the remaining resource allocation variables are then resolved to global optimality by an embedded convex solver. This two-phase decomposition reduces the action-space dimensionality of DDPG while preserving per-slot solution quality. Simulations show that DDPG-CVX achieves 1.25$\times$$\sim$32.36$\times$ the throughput of representative benchmarks.

0.24

Minimizing Energy Consumption based on Waste Factor in Multi-user Multi-relay Systems

eess.SP ·2026-10-03 ·Nurullah Sevim, Mostafa Ibrahim, Sabit Ekin, Theodore S. Rappaport
similarity 0.57
Abstract · Submitted to IEEE Transactions on Green Communications and Networking for review

The escalating energy demands of modern wireless networks make energy-efficient system design a central challenge for future 6G deployments. Relay-assisted communication has long been recognized as a powerful tool for improving coverage and throughput, tracing its roots to early repeater communication systems and the foundational relay channel models in information theory. Meanwhile, modern relay selection and routing strategies are primarily driven by rate-based or transmit-power-centric metrics, which often neglect hardware-level losses that is independent of the transmitted signal. As networks grow denser and more heterogeneous, signal-independent hardware inefficiencies and circuit power consumption increasingly dominate the total energy consumption and fundamentally alter the optimality of relay assignment decisions. To address the challenge of modeling signal-independent power consumption in relay-assisted systems, the Waste Factor (WF) framework is adopted: a hardware-aware, unifying metric that explicitly captures signal-independent power losses across cascaded transceivers and wireless channels. Using WF, the energy consumption of multi-user, multi-relay wireless systems is quantified and minimized under practical hardware and network constraints. The formulation jointly accounts for component inefficiencies, propagation losses, and relay-selection constraints. The proposed framework demonstrates that the WF formulation provides a fundamentally new way to model relay-assisted communication, enabling hardware-aware energy-per-bit minimization and a structured representation that enables computationally efficient analysis. Simulation results confirm that WF-based relay assignment reduces total energy per bit while improving the ability of users to satisfy minimum received-power requirements, outperforming conventional formulations across both metrics.

0.26