CS Paper Radar

A New Backscattering Dual-Polarized Rectenna for Wireless Power Transfer and IoT Applications

Taki Eddine Djidjekh, Quentin Bernyer, Alexandru Takacs

cs.CR cs.NI ·submitted 2026-09-08 14:53 UTC · v1
published

Abstract

This paper proposes an innovative dual-polarized backscattering rectenna that operates in two distinct modesenergy harvesting and backscattering modulation-driven by two-bit digital control signals. By utilizing two orthogonal (co-and cross-) polarizations, the design represents a versatile candidate for IoT applications such as battery-free wireless sensing, identification, localization, and communication. The rectenna's dual functionality is validated through its integration into a proofof-concept battery-free wireless sensor, where it operates both as an energy harvester and as a dual-polarized backscattering modulator. As a proof of concept, a 16-byte AES-128 encrypted payload is backscattered over the wireless power transfer link to enhance the resilience of a battery-free Bluetooth Low Energy (BLE) wireless sensor against replay, relay, and eavesdropping attacks.

Journal ref
2026 IEEE MTT-S Radio Frequency Systems and Applications Symposium (IMS RFSA), Jun 2026, Boston, MA, United States. pp.272-275

Closest papers

Nearest neighbours by meaning across the whole index.

Secure Polarization-Shift Backscatter Identification Applied to Battery-Free BLE Sensors Powered by Wireless Power Transfer

cs.NI ·2026-09-24 ·Taki Eddine Djidjekh, Quentin Bernyer, Alexandru Takacs
published similarity 0.87
Abstract

This paper presents a lightweight and protocolindependent security mechanism for battery-free Bluetooth Low Energy (BLE) sensor nodes operating in Simultaneous Wireless Information and Power Transfer (SWIPT) architecture. The proposed approach exploits polarization-shift backscattering of the wireless power wave to transmit an encrypted device identification prior to data communication. A fail-safe RF switch and orthogonally polarized antennas are integrated as an external add-on module, enabling controlled backscatter without modifying the original energy-harvesting rectifier. The identification payload is encrypted using AES-128 and transmitted with minimal energy overhead. Experimental validation on a battery-free BLE sensor node demonstrates reliable extraction of the backscattered identification signal, seamless coexistence with BLE advertising, and improved RF-to-DC harvesting efficiency compared to rectifier-based backscatter solutions. The results confirm that polarization-shift backscatter identification provides an effective and practical security for battery-free BLE sensing systems.

0.26

From WPT to Encrypted Telemetry: A Battery-Free Backscattering-based Polarimetric Wireless Sensor

cs.NI ·2026-09-24 ·Taki Eddine Djidjekh, Loïc Thomas, Quentin Bernyer, Gaël Loubet, Daniela Dragomirescu +1 more
published similarity 0.76
Abstract

This work introduces an indoor Battery-Free Wireless Sensing Node powered through radiative Wireless Power Transfer (WPT). The proposed platform targets secure, energyefficient active sensing and overcomes key limitations of many prior battery-free approaches, which commonly provide neither on-node computation nor cryptographic protection. The node combines temperature, humidity, pressure and Volatile Organic Compound (VOC) measurements with a low-power microcontroller that executes sensor calibration, derives a VOC index, formats the payload, and applies AES-128 encryption before wireless transmission. Energy harvesting and communication are enabled by a 1-bit controlled Backscatter Rectenna (BR), which both scavenges incident RF power and produces an orthogonally polarized backscattered signal for robust polarimetric operation. Experimental results validate reliable multi-sensor readout and encrypted data transfer, while maintaining a very low energy budget for the complete sense-compute-encrypt-transmit cycle.

0.29

WiFi Backscatter for Green Internet of Things: Concepts, Research Trends, and Practical Challenges

cs.NI ·2026-09-28 ·Weiqi Wu, Shuo Wang, Zhaoyuan Xu
survey similarity 0.67
Abstract

WiFi backscatter has emerged as a promising technology for green Internet of Things (IoT) connectivity by enabling battery-free devices to communicate through widely available WiFi signals. Despite substantial progress in recent years, a considerable gap remains between research prototypes and practical deployment. This paper provides an overview of WiFi backscatter from the perspective of practical and green IoT systems. We first introduce the fundamentals and key enabling techniques, together with potential IoT applications. We then outline recent research trends toward higher throughput, concurrent communication, simplified deployment, commercial compatibility, and joint communication and sensing. Furthermore, we identify the key challenges that still hinder practical deployment, such as limited transmitter-to-tag operating range and packet loss in frequency-shifted backscatter. We believe that addressing these challenges will be critical to enabling WiFi backscatter to become a practical communication technology for future green IoT systems.

0.15

Mobile Backscatter Communication for the Battery-less Internet of Things

cs.NI ·2026-09-01 ·Weining Song, Thiemo Voigt, Stefanos Kaxiras, Yuan Yao, Luca Mottola
published similarity 0.59
Abstract · 11 pages, 20 figures. Extended version of the paper accepted at MSWiM 2026

We enable backscatter communication in the battery-less mobile Internet of Things (IoT). Backscatter communication is extensively studied in static settings. Existing designs are, however, fundamentally mismatched with mobility and time-varying energy patterns. Channel conditions rapidly fluctuate, impacting the achievable data rates and thus transmission costs. Energy availability varies unpredictably, possibly forcing devices to remain quiescent to recharge energy buffers. The two issues compound each other: while recharging, a battery-less mobile IoT device may miss more favorable channel conditions. We design a lightweight decision system that dynamically determines when to transmit by checking short-term trends in signal strength, while using Non-volatile Memory (NVM) to retain packets in unfavorable channel conditions and across energy failures. Using a prototype we built and real-world mobility and power traces, we compare our design against a rate-adaptive baseline that only considers the instantaneous channel conditions. Experimental results show that our system improves throughput by up to 5.16x while reducing transmission energy consumption by up to 47.3%, with only 0.23% - 7.3% additional energy overhead.

0.40

First-Principles Channel Model and Capacity-Achieving Transmission Scheme in Thermal Noise Backscatter Links

eess.SP ·2026-11-02 ·Geneva Ecola, Jida Zhang, Joseph M. Kahn, Zerina Kapetanovic
top venue similarity 0.57
Abstract

Thermal noise communication systems transmit information by modulating thermal radiation, eliminating the need for a dedicated signal power source and making them attractive solutions for low-power sensor networks. Their efficiency enables long-lived, unobtrusive operation, which is valuable in the Internet of Things, electromagnetic interference-sensitive environments, and RFID tag systems. However, a limited understanding of the wireless channel model and efficient transmission schemes has hindered their practical deployment. Here, we present a wireless channel model that elucidates how systems operating at ambient temperature can modulate thermal noise to convey information. Our results reveal a thermal noise backscatter mechanism that enables significantly higher data rates than previously achieved. We designed and built a thermal noise communication system leveraging this mechanism to achieve data rates in the kilobits-per-second range - over two orders of magnitude higher than prior demonstrations. We also derive the system capacity and show that using polar codes, we are able to achieve this expected capacity. Our channel model and transmission scheme pave the way for new strategies in thermal noise sensing and communication, advancing practical low-power networking for next-generation wireless applications.

0.50

Towards Energy-Neutral IoT Sensors: Low-Cost Chirp-Based Backscattering Node Using a COTS Microcontroller and Multi-Load Front-End

eess.SP ·2026-09-23 ·Tijl Schepens, Liesbet Van der Perre, Gilles Callebaut
similarity 0.57
Abstract

Backscatter communication has proven to be a key enabler for energy-neutral sensor nodes in the IoT. It allows ultra-low-power nodes to transmit sensor data by reflecting incident RF signals. Practical large-scale deployment requires hardware solutions that are both cost-efficient and widely available. This paper investigates the practical limits of implementing backscatter transmitters exclusively using COTS components. We compare a two-load and multi-load architecture in terms of hardware requirements, complexity and spectral efficiency highlighting the most important trade-offs. A multi-load backscatter architecture is developed using a resource constrained low-power microcontroller, levering DMA to achieve high switching speeds while minimizing processing overhead. Furthermore, we present a layout agnostic load design methodology based on scattering parameters, allowing precise control of the reflection coefficients. A prototype implementation demonstrates a successful backscatter transmission of a single-sideband chirp with reduced harmonic distortion. Measurement results show suppression of the backscattered carrier and the second sideband by 10 dBm. This demonstrates that low-cost sensor nodes can be built using COTS components enabling remote monitoring at extended lifetimes.

0.23

Polarforming-Enabled Power-Splitting SWIPT: A GNN-Based Optimization Approach

cs.IT ·2026-09-12 ·Hamed Aghaei-Karkaj, Kamran Ebrahimi, Zahra Mehrzad, Mohammad Robat Mili, Symeon Chatzinotas +1 more
similarity 0.56
Abstract · 5 pages, 5 figures

Simultaneous wireless information and power transfer (SWIPT) is a critical technology for the future of the Internet of Things (IoT). However, ensuring a stable power supply in such networks remains a significant challenge. This work introduces dynamic polarization control as an additional degree of freedom (DoF) in SWIPT systems. We propose a system where both the base station (BS) and the users can adjust their antenna polarization, a technique known as polarforming. In addition, each user device is capable of splitting the incident signal to perform simultaneous information decoding (ID) and energy harvesting (EH). The resulting non-convex optimization, with many coupled variables, is solved using a graph neural network (GNN) that learns the sub-optimal beamforming, polarization, and power-splitting variables. Simulation results demonstrate that the proposed GNN-based dynamic polarforming optimization significantly outperforms fixed-polarization schemes, particularly under imperfect channel state information (CSI). Moreover, joint polarforming and GNN-based optimization maintain robust SWIPT performance under both polarization mismatch and imperfect CSI.

0.31

Tags Helping Tags: Coordination-Free Power Boosting for Battery-less Backscatter Networks

eess.SY eess.SP ·2026-11-05 ·Mathew Salas, Xin Xiong, Sihua Shao, Atef Elsherbeni, Mostafa Hassanalian +1 more
similarity 0.55
Abstract

Battery-less backscatter sensor nodes powered by radio-frequency wireless power transfer are attractive for large or hard-to-reach deployments, but their range is typically limited by the forward power-transfer link rather than by communication sensitivity. We present a method for improving power delivery, and thus range, in dense tag deployments by having nearby tags act as helpers: each helper terminates its antenna in purely reactive impedances, reflecting the power beacon's signal toward a target tag so that it combines constructively with the direct line-of-sight path and increases the power the target harvests. On a hardware testbed, helpers using discrete impedance control are shown to increase the target tag's harvested power by over 50% above an all-absorbing baseline, while randomly set helper impedances give no reliable benefit, and are sometimes even detrimental. We further propose and implement a local algorithm that lets each helper tune its own impedance using only measurements of the target's packet rate, without channel estimation or coordination between helpers, and we show that it brings the target's packet rate close to that of an independently tuned configuration. These results suggest that independent, passive sensor nodes can cooperatively extend each other's power-transfer range with minimal added infrastructure.

0.31