CS Paper Radar

Polarforming-Enabled Power-Splitting SWIPT: A GNN-Based Optimization Approach

Hamed Aghaei-Karkaj, Kamran Ebrahimi, Zahra Mehrzad, Mohammad Robat Mili, Symeon Chatzinotas, Ioannis Krikidis

cs.IT ·submitted 2026-09-12 15:57 UTC · v1

Abstract

Simultaneous wireless information and power transfer (SWIPT) is a critical technology for the future of the Internet of Things (IoT). However, ensuring a stable power supply in such networks remains a significant challenge. This work introduces dynamic polarization control as an additional degree of freedom (DoF) in SWIPT systems. We propose a system where both the base station (BS) and the users can adjust their antenna polarization, a technique known as polarforming. In addition, each user device is capable of splitting the incident signal to perform simultaneous information decoding (ID) and energy harvesting (EH). The resulting non-convex optimization, with many coupled variables, is solved using a graph neural network (GNN) that learns the sub-optimal beamforming, polarization, and power-splitting variables. Simulation results demonstrate that the proposed GNN-based dynamic polarforming optimization significantly outperforms fixed-polarization schemes, particularly under imperfect channel state information (CSI). Moreover, joint polarforming and GNN-based optimization maintain robust SWIPT performance under both polarization mismatch and imperfect CSI.

Comment
5 pages, 5 figures

Closest papers

Nearest neighbours by meaning across the whole index.

GNN-Based Polarforming for Multi-User MISO Short-Packet URLLC under Imperfect CSI

cs.IT ·2026-09-12 ·Zahra Mehrzad, Hamed Aghaei-Karkaj, Rahman Saadat Yeganeh, Kamran Ebrahimi, Mohammad Robat Mili +2 more
similarity 0.70
Abstract · 5 pages, 5 figures

This paper investigates polarization-aware transmission for multi-user multiple-input single-output (MU-MISO) short-packet ultra-reliable low-latency communications (URLLC) under imperfect channel state information (CSI). We consider a system in which the base station (BS) and users are equipped with polarization-reconfigurable antennas that enable adaptive polarization states through controllable polarization coefficients. A multi-objective optimization problem is formulated to jointly maximize the finite-blocklength (FBL) achievable sum rate and minimize the maximum decoding error probability (DEP), subject to transmit-power, latency, reliability, and discrete polarization-control constraints. The resulting multi-objective problem is scalarized using a normalized weighted-sum utility. To enable low-complexity online decision-making, a heterogeneous graph neural network (GNN) is developed to learn the joint mapping from estimated polarized CSI to digital beamforming and transmit/receive polarforming vectors (PFVs) while accounting for the system constraints. Numerical results demonstrate that the proposed GNN-based polarforming (PF) framework substantially improves the FBL sum rate while reducing the maximum DEP compared with conventional fixed-polarization schemes, particularly under channel depolarization and imperfect CSI. This highlights the potential of adaptive polarization control for reliable low-latency transmission.

0.34

Hybrid STAR-RIS Architecture for Joint Localization, Communication, and Power Transfer

eess.SP ·2026-08-12 ·Haoran Ni, Mohammadali Mohammadi, Xidong Mu, Hien Quoc Ngo, Michail Matthaiou
top venue similarity 0.59
Abstract · Accepted for publication in IEEE Transactions on Wireless Communications, Aug. 2026

We propose a hybrid simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) architecture with dynamically switched active and passive elements to support joint localization, communication, and wireless power transfer (WPT). We first pursue a parallel factor analysis with the alternating least squares (PARAFAC-ALS)-based tensor decomposition approach that decouples the base station (BS)-reconfigurable intelligent surface (RIS) and RIS-user channels, thereby enabling low-overhead channel acquisition. Based on this, we formulate a system energy efficiency (EE) maximization problem, subject to the spectral efficiency (SE) requirements of communication users, sensing signal-to-interference-plus-noise ratio constraints, and the nonlinear energy harvesting requirements of energy-harvesting users. The optimization problem is nonconvex since the transmit power allocation, STAR-RIS coefficients, and active/passive mode assignments are tightly coupled in both the objective and constraints. We address this issue by alternating between two subproblems, and solving them via fractional programming, successive convex approximation and a multi-seed greedy strategy employed as an initialization step. Numerical results demonstrate that selectively activating a small, well-chosen subset of STAR-RIS elements achieves 1.5 to 3 times EE improvements compared with fully passive/active architectures, while satisfying communication, sensing, and power-transfer requirements.

0.63

Learning to Maximize Energy Efficiency in 6G in-X Subnetworks

eess.SP cs.NI ·2026-09-21 ·Ramoni Adeogun
published similarity 0.59
Abstract · Accepted in IEEE VTC Fall 2026

This paper investigates energy-efficient power control in 6G in-X subnetworks. We consider a graph neural network (GNN) framework that captures inter-subnetwork interference and the underlying wireless topology to optimize transmit powers. Three energy efficiency (EE) formulations are studied: (i) network-centric, which maximizes total network energy efficiency; (ii) subnetwork-centric, which maximizes the average energy efficiency per subnetwork; and (iii) a multi-objective approach, which balances energy efficiency and sum-rate performance. Extensive simulations in industrial factory settings with 3GPP channel models demonstrate that the GNN effectively learns interference-aware power allocation policies, significantly outperforming maximum power transmission and existing GNN based power control solution. Results showed network EE gains of up to 1341%, average per-device EE improvements of up to 1302%, and sum-rate enhancements up to 24.7% relative to a maximum transmit power policy, depending on the chosen optimization formulation and trade-off settings.

0.29

Leveraging Movable-Element STARS for RSMA-SWIPT Under Practical System Imperfections

eess.SP ·2026-09-24 ·Muhammad Asif, Asim Ihsan, Irfan Muhammad, Zhu Shoujin, Mikael Gidlund +1 more
benchmark similarity 0.59
Abstract · 14 pages, 9 figures

We study a robust multiuser framework for simultaneous wireless information and power transfer (SWIPT), where rate-splitting multiple access (RSMA) is integrated with a movable-element simultaneously transmitting and reflecting surface (ME-STARS). By allowing the STARS elements to change their positions in addition to controlling the reflection and transmission coefficients, the proposed architecture provides additional spatial flexibility for improving the cascaded channels toward users in both regions. Meanwhile, RSMA is employed to manage multiuser interference, while power-splitting receivers enable simultaneous information decoding and energy harvesting. The system design further accounts for channel state information (CSI) uncertainty, residual transceiver hardware impairments (HIs), and the nonlinear characteristics of practical energy-harvesting circuits. Accordingly, a robust sum-rate maximization problem is formulated by jointly designing the BS precoders, common-rate allocation, ME-STARS reflection/transmission coefficients, power-splitting (PS) ratios, and movable-element positions. The resulting formulation is highly non-convex because the movable-element positions affect the cascaded channels non-linearly and are tightly coupled with the remaining design variables. To obtain a tractable solution, the joint design is decomposed into active beamforming, passive beamforming, movable-element positioning, and PS-ratio optimization blocks, which are updated iteratively through suitable convex reformulations. Numerical results show that the proposed framework delivers higher sum rates than the considered benchmark schemes, exhibits robust behavior under CSI uncertainty and residual HIs, and achieves stable convergence across the considered system configurations.

0.16

Polarization-Aware Rotatable Antennas for RIS-Empowered Symbiotic Radios

eess.SP ·2026-09-03 ·Chao Zhang, Ruizhe Long, Boon-Hee Soong, Ying-Chang Liang
benchmark similarity 0.57
Abstract

This paper investigates a dual-polarized reconfigurable intelligent surface (DP-RIS)-empowered symbiotic radio (SR) system with rotatable antennas (RAs). By reconfiguring antenna orientations, RAs can steer their radiation patterns toward desired directions, thereby effectively mitigating the double-fading effect in RIS-assisted cascaded links. However, antenna rotation not only changes the radiation direction but also alters the local polarization bases, which may result in polarization mismatch and degrade the achievable gain. This motivates a joint spatial-polarization design that simultaneously exploits directional radiation gain and polarization matching. Specifically, we formulate a transmit power minimization problem that jointly optimizes digital beamforming, RA rotations, transceiver polarization states, and DP-RIS phase shifts, subject to the primary and secondary rate requirements as well as interference temperature constraints for non-SR users. To solve this non-convex problem, we develop an alternating optimization algorithm that integrates semidefinite programming, difference-of-convex programming, and Riemannian conjugate gradient methods. Moreover, to reduce hardware and computational complexity for practical deployment, we propose two low-complexity RA designs, namely a subarray-wise shared rotation design and a discrete rotation codebook design. Simulation results show that the proposed polarization-aware RA design significantly reduces the required transmit power compared with fixed-orientation and polarization-unaware benchmark schemes. Moreover, both the proposed low-complexity RA designs achieve comparable performance with reduced rotation complexity.

0.45

Max-Min Throughput in RSMA-Aided SWIPT for Sustainable Internet of Underground Things: A Deep Reinforcement Learning Approach

eess.SY cs.LGeess.SP ·2026-11-15 ·Kaiqiang Lin, Mohamed-Slim Alouini
similarity 0.57
Abstract · 15 pages, 7 figures, and 3 tables

Unmanned aerial vehicle (UAV)-enabled wireless-powered underground sensor networks (WPUSNs) allow underground devices (UDs) to harvest radio-frequency energy from a UAV via wireless energy transfer (WET) techniques, enabling sustainable Internet of underground things (IoUT) applications. This paper integrates rate-splitting multiple access (RSMA)-aided simultaneous wireless information and power transfer (SWIPT) into UAV-enabled WPUSNs to deliver information and energy to UDs. Within this framework, we investigate a max-min fairness problem that jointly optimizes the UAV transmit power, power allocation and message splitting, power-splitting ratios, and time allocation, aiming to maximize the minimum uplink throughput across UDs subject to per-UD downlink throughput requirements and a UAV energy-consumption constraint. To address this non-convex problem under dynamic underground environments, we develop an off-policy deep reinforcement learning approach based on the primal-dual truncated quantile critics (PD-TQC), where a TQC-based reward critic evaluates the fairness objective, cost critics estimate constraint costs, and an actor learns the resource-control policy with adaptive dual-variable updates. Simulations using in-situ soil volumetric water content measurements from a center-pivot irrigation farm demonstrate that PD-TQC achieves the highest annual average minimum uplink throughput compared with four benchmarks while satisfying the per-frame constraints in over 96% of the evaluated frames, and that this throughput advantage is preserved under different Rician factors, numbers of UDs, and downlink throughput thresholds.

0.30

A New Backscattering Dual-Polarized Rectenna for Wireless Power Transfer and IoT Applications

cs.CR cs.NI ·2026-09-08 ·Taki Eddine Djidjekh, Quentin Bernyer, Alexandru Takacs
published similarity 0.56
Abstract

This paper proposes an innovative dual-polarized backscattering rectenna that operates in two distinct modesenergy harvesting and backscattering modulation-driven by two-bit digital control signals. By utilizing two orthogonal (co-and cross-) polarizations, the design represents a versatile candidate for IoT applications such as battery-free wireless sensing, identification, localization, and communication. The rectenna's dual functionality is validated through its integration into a proofof-concept battery-free wireless sensor, where it operates both as an energy harvester and as a dual-polarized backscattering modulator. As a proof of concept, a 16-byte AES-128 encrypted payload is backscattered over the wireless power transfer link to enhance the resilience of a battery-free Bluetooth Low Energy (BLE) wireless sensor against replay, relay, and eavesdropping attacks.

0.45

Secure Polarization-Shift Backscatter Identification Applied to Battery-Free BLE Sensors Powered by Wireless Power Transfer

cs.NI ·2026-09-24 ·Taki Eddine Djidjekh, Quentin Bernyer, Alexandru Takacs
published similarity 0.55
Abstract

This paper presents a lightweight and protocolindependent security mechanism for battery-free Bluetooth Low Energy (BLE) sensor nodes operating in Simultaneous Wireless Information and Power Transfer (SWIPT) architecture. The proposed approach exploits polarization-shift backscattering of the wireless power wave to transmit an encrypted device identification prior to data communication. A fail-safe RF switch and orthogonally polarized antennas are integrated as an external add-on module, enabling controlled backscatter without modifying the original energy-harvesting rectifier. The identification payload is encrypted using AES-128 and transmitted with minimal energy overhead. Experimental validation on a battery-free BLE sensor node demonstrates reliable extraction of the backscattered identification signal, seamless coexistence with BLE advertising, and improved RF-to-DC harvesting efficiency compared to rectifier-based backscatter solutions. The results confirm that polarization-shift backscatter identification provides an effective and practical security for battery-free BLE sensing systems.

0.26