CS Paper Radar

Secure Polarization-Shift Backscatter Identification Applied to Battery-Free BLE Sensors Powered by Wireless Power Transfer

Taki Eddine Djidjekh, Quentin Bernyer, Alexandru Takacs

cs.NI ·submitted 2026-09-24 08:19 UTC · v1
published

Abstract

This paper presents a lightweight and protocolindependent security mechanism for battery-free Bluetooth Low Energy (BLE) sensor nodes operating in Simultaneous Wireless Information and Power Transfer (SWIPT) architecture. The proposed approach exploits polarization-shift backscattering of the wireless power wave to transmit an encrypted device identification prior to data communication. A fail-safe RF switch and orthogonally polarized antennas are integrated as an external add-on module, enabling controlled backscatter without modifying the original energy-harvesting rectifier. The identification payload is encrypted using AES-128 and transmitted with minimal energy overhead. Experimental validation on a battery-free BLE sensor node demonstrates reliable extraction of the backscattered identification signal, seamless coexistence with BLE advertising, and improved RF-to-DC harvesting efficiency compared to rectifier-based backscatter solutions. The results confirm that polarization-shift backscatter identification provides an effective and practical security for battery-free BLE sensing systems.

Journal ref
2026 IEEE Wireless Power Technology Conference and Expo (WPTCE), Jul 2026, Halifax, Canada. pp.1-5

Closest papers

Nearest neighbours by meaning across the whole index.

A New Backscattering Dual-Polarized Rectenna for Wireless Power Transfer and IoT Applications

cs.CR cs.NI ·2026-09-08 ·Taki Eddine Djidjekh, Quentin Bernyer, Alexandru Takacs
published similarity 0.87
Abstract

This paper proposes an innovative dual-polarized backscattering rectenna that operates in two distinct modesenergy harvesting and backscattering modulation-driven by two-bit digital control signals. By utilizing two orthogonal (co-and cross-) polarizations, the design represents a versatile candidate for IoT applications such as battery-free wireless sensing, identification, localization, and communication. The rectenna's dual functionality is validated through its integration into a proofof-concept battery-free wireless sensor, where it operates both as an energy harvester and as a dual-polarized backscattering modulator. As a proof of concept, a 16-byte AES-128 encrypted payload is backscattered over the wireless power transfer link to enhance the resilience of a battery-free Bluetooth Low Energy (BLE) wireless sensor against replay, relay, and eavesdropping attacks.

0.45

From WPT to Encrypted Telemetry: A Battery-Free Backscattering-based Polarimetric Wireless Sensor

cs.NI ·2026-09-24 ·Taki Eddine Djidjekh, Loïc Thomas, Quentin Bernyer, Gaël Loubet, Daniela Dragomirescu +1 more
published similarity 0.75
Abstract

This work introduces an indoor Battery-Free Wireless Sensing Node powered through radiative Wireless Power Transfer (WPT). The proposed platform targets secure, energyefficient active sensing and overcomes key limitations of many prior battery-free approaches, which commonly provide neither on-node computation nor cryptographic protection. The node combines temperature, humidity, pressure and Volatile Organic Compound (VOC) measurements with a low-power microcontroller that executes sensor calibration, derives a VOC index, formats the payload, and applies AES-128 encryption before wireless transmission. Energy harvesting and communication are enabled by a 1-bit controlled Backscatter Rectenna (BR), which both scavenges incident RF power and produces an orthogonally polarized backscattered signal for robust polarimetric operation. Experimental results validate reliable multi-sensor readout and encrypted data transfer, while maintaining a very low energy budget for the complete sense-compute-encrypt-transmit cycle.

0.29

WiFi Backscatter for Green Internet of Things: Concepts, Research Trends, and Practical Challenges

cs.NI ·2026-09-28 ·Weiqi Wu, Shuo Wang, Zhaoyuan Xu
survey similarity 0.62
Abstract

WiFi backscatter has emerged as a promising technology for green Internet of Things (IoT) connectivity by enabling battery-free devices to communicate through widely available WiFi signals. Despite substantial progress in recent years, a considerable gap remains between research prototypes and practical deployment. This paper provides an overview of WiFi backscatter from the perspective of practical and green IoT systems. We first introduce the fundamentals and key enabling techniques, together with potential IoT applications. We then outline recent research trends toward higher throughput, concurrent communication, simplified deployment, commercial compatibility, and joint communication and sensing. Furthermore, we identify the key challenges that still hinder practical deployment, such as limited transmitter-to-tag operating range and packet loss in frequency-shifted backscatter. We believe that addressing these challenges will be critical to enabling WiFi backscatter to become a practical communication technology for future green IoT systems.

0.15

Plug-and-Play Quantum-Resistant BLE Pairing for Medical Implants via NFC Out-of-Band

cs.CR ·2026-10-06 ·Muhammad Asim Javaid, Muhammad Shafay Tanveer Hassan, Faaiz Umer, Sotirios Panagiotou, Christos Strydis +3 more
published similarity 0.59
Abstract · Accepted for presentation at the 2026 IEEE International Conference on E-health Networking, Application & Services (IEEE HealthCom 2026), Oc…

Bluetooth Low Energy (BLE) pairing establishes the cryptographic foundation for secure device communication. However, mainstream man-in-the-middle (MITM)-resistant pairing methods, such as Numeric Comparison and Passkey Entry, require user interfaces that implantable medical devices (IMDs) inherently lack, making Near-Field Communication (NFC)-assisted Out-of-Band (OOB) pairing an attractive alternative. Existing NFC-assisted OOB schemes authenticate a classical BLE key exchange that remains vulnerable to quantum attacks, while the NFC channel itself is susceptible to eavesdropping and active injection under stronger threat models. To address these limitations, we propose a lightweight, plug-and-play NFC-based OOB pairing protocol that performs a post-quantum key encapsulation mechanism (KEM) entirely over the NFC channel, ensuring that no shared secret is transmitted over NFC while reducing long-range radio-frequency (RF) exposure during pairing. The proposed protocol requires no modifications to the BLE stack and inherently resists RF battery-depletion attacks. Evaluation on an IMD-class proof-of-concept testbed demonstrates that post-quantum OOB pairing is practical on resource-constrained devices, reducing projected battery life by less than 0.57\% for Kyber-1024 and 0.56\% for FireSABER under an operational usage model relative to the MITM-vulnerable Just Works method.

0.33

Tags Helping Tags: Coordination-Free Power Boosting for Battery-less Backscatter Networks

eess.SY eess.SP ·2026-11-05 ·Mathew Salas, Xin Xiong, Sihua Shao, Atef Elsherbeni, Mostafa Hassanalian +1 more
similarity 0.56
Abstract

Battery-less backscatter sensor nodes powered by radio-frequency wireless power transfer are attractive for large or hard-to-reach deployments, but their range is typically limited by the forward power-transfer link rather than by communication sensitivity. We present a method for improving power delivery, and thus range, in dense tag deployments by having nearby tags act as helpers: each helper terminates its antenna in purely reactive impedances, reflecting the power beacon's signal toward a target tag so that it combines constructively with the direct line-of-sight path and increases the power the target harvests. On a hardware testbed, helpers using discrete impedance control are shown to increase the target tag's harvested power by over 50% above an all-absorbing baseline, while randomly set helper impedances give no reliable benefit, and are sometimes even detrimental. We further propose and implement a local algorithm that lets each helper tune its own impedance using only measurements of the target's packet rate, without channel estimation or coordination between helpers, and we show that it brings the target's packet rate close to that of an independently tuned configuration. These results suggest that independent, passive sensor nodes can cooperatively extend each other's power-transfer range with minimal added infrastructure.

0.31

Mobile Backscatter Communication for the Battery-less Internet of Things

cs.NI ·2026-09-01 ·Weining Song, Thiemo Voigt, Stefanos Kaxiras, Yuan Yao, Luca Mottola
published similarity 0.56
Abstract · 11 pages, 20 figures. Extended version of the paper accepted at MSWiM 2026

We enable backscatter communication in the battery-less mobile Internet of Things (IoT). Backscatter communication is extensively studied in static settings. Existing designs are, however, fundamentally mismatched with mobility and time-varying energy patterns. Channel conditions rapidly fluctuate, impacting the achievable data rates and thus transmission costs. Energy availability varies unpredictably, possibly forcing devices to remain quiescent to recharge energy buffers. The two issues compound each other: while recharging, a battery-less mobile IoT device may miss more favorable channel conditions. We design a lightweight decision system that dynamically determines when to transmit by checking short-term trends in signal strength, while using Non-volatile Memory (NVM) to retain packets in unfavorable channel conditions and across energy failures. Using a prototype we built and real-world mobility and power traces, we compare our design against a rate-adaptive baseline that only considers the instantaneous channel conditions. Experimental results show that our system improves throughput by up to 5.16x while reducing transmission energy consumption by up to 47.3%, with only 0.23% - 7.3% additional energy overhead.

0.40

Polarforming-Enabled Power-Splitting SWIPT: A GNN-Based Optimization Approach

cs.IT ·2026-09-12 ·Hamed Aghaei-Karkaj, Kamran Ebrahimi, Zahra Mehrzad, Mohammad Robat Mili, Symeon Chatzinotas +1 more
similarity 0.55
Abstract · 5 pages, 5 figures

Simultaneous wireless information and power transfer (SWIPT) is a critical technology for the future of the Internet of Things (IoT). However, ensuring a stable power supply in such networks remains a significant challenge. This work introduces dynamic polarization control as an additional degree of freedom (DoF) in SWIPT systems. We propose a system where both the base station (BS) and the users can adjust their antenna polarization, a technique known as polarforming. In addition, each user device is capable of splitting the incident signal to perform simultaneous information decoding (ID) and energy harvesting (EH). The resulting non-convex optimization, with many coupled variables, is solved using a graph neural network (GNN) that learns the sub-optimal beamforming, polarization, and power-splitting variables. Simulation results demonstrate that the proposed GNN-based dynamic polarforming optimization significantly outperforms fixed-polarization schemes, particularly under imperfect channel state information (CSI). Moreover, joint polarforming and GNN-based optimization maintain robust SWIPT performance under both polarization mismatch and imperfect CSI.

0.31

Secure Wireless Information Transfer and Energy Harvesting in HAPS-Based Network

cs.IT eess.SY ·2026-08-23 ·Khaled Humadi, Gunes Karabulut-Kurt, Wessam Ajib, Wei-Ping Zhu
published similarity 0.55
Abstract

High-altitude platform station (HAPS) serves as a promising enabler for wide-area connectivity of low-power wireless devices, particularly in remote and underserved regions. However, the strong line-of-sight characteristics of HAPS links increase the risk of eavesdropping, while the limited energy budget of ground devices remains a major operational constraint. In this work, we propose a secure wireless information and energy harvesting framework for HAPS-based networks in the presence of spatially distributed eavesdroppers. The proposed system integrates friendly jamming and power transfer nodes equipped with null-steering capability antennas, such that they not only degrade the reception quality at eavesdroppers but also act as additional radio-frequency energy sources for legitimate users. A time-switching wireless information and power transfer architecture is adopted at the user side. Under this framework, we derive tractable expressions for the joint rate-energy coverage and the average secrecy rate using stochastic geometry tools. Numerical and Monte Carlo results validate the developed analysis and reveal key design trade-offs among the time allocation factor, null-steering-zone radius around each user, and jammer transmit power. In particular, the results show that properly coordinated null-steering jamming can simultaneously support secure communication and adequate wireless power transfer, while an appropriate choice of system parameters, such as time allocation factor and jamming power, is required to balance harvested energy, communication reliability, and secrecy performance.

0.31