CS Paper Radar

Towards Energy-Neutral IoT Sensors: Low-Cost Chirp-Based Backscattering Node Using a COTS Microcontroller and Multi-Load Front-End

Tijl Schepens, Liesbet Van der Perre, Gilles Callebaut

eess.SP ·submitted 2026-09-23 13:07 UTC · v1

Abstract

Backscatter communication has proven to be a key enabler for energy-neutral sensor nodes in the IoT. It allows ultra-low-power nodes to transmit sensor data by reflecting incident RF signals. Practical large-scale deployment requires hardware solutions that are both cost-efficient and widely available. This paper investigates the practical limits of implementing backscatter transmitters exclusively using COTS components. We compare a two-load and multi-load architecture in terms of hardware requirements, complexity and spectral efficiency highlighting the most important trade-offs. A multi-load backscatter architecture is developed using a resource constrained low-power microcontroller, levering DMA to achieve high switching speeds while minimizing processing overhead. Furthermore, we present a layout agnostic load design methodology based on scattering parameters, allowing precise control of the reflection coefficients. A prototype implementation demonstrates a successful backscatter transmission of a single-sideband chirp with reduced harmonic distortion. Measurement results show suppression of the backscattered carrier and the second sideband by 10 dBm. This demonstrates that low-cost sensor nodes can be built using COTS components enabling remote monitoring at extended lifetimes.

Closest papers

Nearest neighbours by meaning across the whole index.

WiFi Backscatter for Green Internet of Things: Concepts, Research Trends, and Practical Challenges

cs.NI ·2026-09-28 ·Weiqi Wu, Shuo Wang, Zhaoyuan Xu
survey similarity 0.62
Abstract

WiFi backscatter has emerged as a promising technology for green Internet of Things (IoT) connectivity by enabling battery-free devices to communicate through widely available WiFi signals. Despite substantial progress in recent years, a considerable gap remains between research prototypes and practical deployment. This paper provides an overview of WiFi backscatter from the perspective of practical and green IoT systems. We first introduce the fundamentals and key enabling techniques, together with potential IoT applications. We then outline recent research trends toward higher throughput, concurrent communication, simplified deployment, commercial compatibility, and joint communication and sensing. Furthermore, we identify the key challenges that still hinder practical deployment, such as limited transmitter-to-tag operating range and packet loss in frequency-shifted backscatter. We believe that addressing these challenges will be critical to enabling WiFi backscatter to become a practical communication technology for future green IoT systems.

0.15

A New Backscattering Dual-Polarized Rectenna for Wireless Power Transfer and IoT Applications

cs.CR cs.NI ·2026-09-08 ·Taki Eddine Djidjekh, Quentin Bernyer, Alexandru Takacs
published similarity 0.57
Abstract

This paper proposes an innovative dual-polarized backscattering rectenna that operates in two distinct modesenergy harvesting and backscattering modulation-driven by two-bit digital control signals. By utilizing two orthogonal (co-and cross-) polarizations, the design represents a versatile candidate for IoT applications such as battery-free wireless sensing, identification, localization, and communication. The rectenna's dual functionality is validated through its integration into a proofof-concept battery-free wireless sensor, where it operates both as an energy harvester and as a dual-polarized backscattering modulator. As a proof of concept, a 16-byte AES-128 encrypted payload is backscattered over the wireless power transfer link to enhance the resilience of a battery-free Bluetooth Low Energy (BLE) wireless sensor against replay, relay, and eavesdropping attacks.

0.45

Tags Helping Tags: Coordination-Free Power Boosting for Battery-less Backscatter Networks

eess.SY eess.SP ·2026-11-05 ·Mathew Salas, Xin Xiong, Sihua Shao, Atef Elsherbeni, Mostafa Hassanalian +1 more
similarity 0.56
Abstract

Battery-less backscatter sensor nodes powered by radio-frequency wireless power transfer are attractive for large or hard-to-reach deployments, but their range is typically limited by the forward power-transfer link rather than by communication sensitivity. We present a method for improving power delivery, and thus range, in dense tag deployments by having nearby tags act as helpers: each helper terminates its antenna in purely reactive impedances, reflecting the power beacon's signal toward a target tag so that it combines constructively with the direct line-of-sight path and increases the power the target harvests. On a hardware testbed, helpers using discrete impedance control are shown to increase the target tag's harvested power by over 50% above an all-absorbing baseline, while randomly set helper impedances give no reliable benefit, and are sometimes even detrimental. We further propose and implement a local algorithm that lets each helper tune its own impedance using only measurements of the target's packet rate, without channel estimation or coordination between helpers, and we show that it brings the target's packet rate close to that of an independently tuned configuration. These results suggest that independent, passive sensor nodes can cooperatively extend each other's power-transfer range with minimal added infrastructure.

0.31

Mobile Backscatter Communication for the Battery-less Internet of Things

cs.NI ·2026-09-01 ·Weining Song, Thiemo Voigt, Stefanos Kaxiras, Yuan Yao, Luca Mottola
published similarity 0.55
Abstract · 11 pages, 20 figures. Extended version of the paper accepted at MSWiM 2026

We enable backscatter communication in the battery-less mobile Internet of Things (IoT). Backscatter communication is extensively studied in static settings. Existing designs are, however, fundamentally mismatched with mobility and time-varying energy patterns. Channel conditions rapidly fluctuate, impacting the achievable data rates and thus transmission costs. Energy availability varies unpredictably, possibly forcing devices to remain quiescent to recharge energy buffers. The two issues compound each other: while recharging, a battery-less mobile IoT device may miss more favorable channel conditions. We design a lightweight decision system that dynamically determines when to transmit by checking short-term trends in signal strength, while using Non-volatile Memory (NVM) to retain packets in unfavorable channel conditions and across energy failures. Using a prototype we built and real-world mobility and power traces, we compare our design against a rate-adaptive baseline that only considers the instantaneous channel conditions. Experimental results show that our system improves throughput by up to 5.16x while reducing transmission energy consumption by up to 47.3%, with only 0.23% - 7.3% additional energy overhead.

0.40

First-Principles Channel Model and Capacity-Achieving Transmission Scheme in Thermal Noise Backscatter Links

eess.SP ·2026-11-02 ·Geneva Ecola, Jida Zhang, Joseph M. Kahn, Zerina Kapetanovic
top venue similarity 0.55
Abstract

Thermal noise communication systems transmit information by modulating thermal radiation, eliminating the need for a dedicated signal power source and making them attractive solutions for low-power sensor networks. Their efficiency enables long-lived, unobtrusive operation, which is valuable in the Internet of Things, electromagnetic interference-sensitive environments, and RFID tag systems. However, a limited understanding of the wireless channel model and efficient transmission schemes has hindered their practical deployment. Here, we present a wireless channel model that elucidates how systems operating at ambient temperature can modulate thermal noise to convey information. Our results reveal a thermal noise backscatter mechanism that enables significantly higher data rates than previously achieved. We designed and built a thermal noise communication system leveraging this mechanism to achieve data rates in the kilobits-per-second range - over two orders of magnitude higher than prior demonstrations. We also derive the system capacity and show that using polar codes, we are able to achieve this expected capacity. Our channel model and transmission scheme pave the way for new strategies in thermal noise sensing and communication, advancing practical low-power networking for next-generation wireless applications.

0.50

Joint Target-Tag Estimation in Ambient Backscatter-Based ISAC

eess.SP ·2026-10-04 ·Awadhesh Gupta, Kumar Vijay Mishra, Naveen K. D. Venkategowda, Aditya K. Jagannatham
top venuetheory similarity 0.52
Abstract

Integrated sensing and communication (ISAC) has emerged as a key paradigm for unifying radar sensing and wireless communications within a shared hardware and spectral framework. In parallel, ambient backscatter communication (AmBC) has gained attention as a low-power solution for enabling passive connectivity by modulating and reflecting existing radio-frequency signals. Motivated by these developments, this paper investigates an integrated sensing and ambient backscatter communication (ISABC) framework in which a dual-functional radar-communication (DFRC) transceiver jointly performs high-resolution target sensing and low-power tag detection in cluttered environments. Within this ISAC and AmBC setting, we develop a comprehensive system model that jointly captures the estimation of target and clutter parameters, including delay, Doppler shift, and complex reflectivity, together with the recovery of embedded AmBC tag symbols. The resulting DFRC signal model reveals strong coupling among direct-path reflections, clutter echoes, and passive backscatter signals, leading to a highly entangled estimation problem. To address this challenge, we propose a robust three-stage signal processing framework that sequentially estimates target and clutter parameters before detecting the AmBC tag message. This structured approach effectively disentangles the superimposed components, improving both sensing accuracy and communication reliability in ISAC systems. Extensive simulations, benchmarked against the Cramer-Rao lower bound (CRLB), demonstrate the superior estimation performance of the proposed DFRC-based solution. The results further highlight the fundamental trade-offs between sensing accuracy and backscatter communication efficiency in ISABC systems.

0.42

Joint Transmit Power and Reflection Coefficient Optimization for Underlay Cognitive Radio Ambient Backscatter Communication

eess.SP ·2026-10-31 ·Chabalala S. Chabalala, Peter Odero Akuon, Zhen Gao
theory similarity 0.52
Abstract · Ambient backscatter communication (AmBC), cognitive radio networks (CRNs), interference management, outage performance, power reflection coe…

The integration of cognitive radio (CR) technology with backscatter communication offers a promising solution for developing spectrum-efficient and low-power wireless networks. In this paper, we investigate the performance of an underlay cognitive radio ambient backscatter communication (CR-AmBC) system operating under primary network (PN) interference constraints. The objective is to maximize the performance of the CR-AmBC system while protecting the PN from interference. Differing from prior work, our formulation jointly accounts for: (i) interference from the PN on the CR receivers, (ii) interference from the backscatter device (BD) on the PN receiver, and (iii) imperfect successive interference cancellation (i-SIC) at the secondary destination. We propose a joint transmit power and reflection coefficient optimization framework that incorporates the minimum data rate requirements, the PN interference constraint, and i-SIC for decoding the BD signal. The nonconvex problem is decomposed into two subproblems solved via alternating optimization: (a) a closed-form expression for the feasible transmit power given a fixed reflection coefficient, and (b) an efficient one-dimensional search for the reflection coefficient. We prove that the power update is optimal, reducing the joint problem to a one-dimensional search, with monotone convergence and $\mathcal{O}(KN_β)$ complexity for $K$ iterations and $N_β$ search points. We present a comprehensive simulation-based performance evaluation and the results demonstrate that the proposed joint transmission power and reflection coefficient optimization provides an effective strategy to maximize the performance of the CR-AmBC system without violating the PN protection constraints.

0.07

From WPT to Encrypted Telemetry: A Battery-Free Backscattering-based Polarimetric Wireless Sensor

cs.NI ·2026-09-24 ·Taki Eddine Djidjekh, Loïc Thomas, Quentin Bernyer, Gaël Loubet, Daniela Dragomirescu +1 more
published similarity 0.51
Abstract

This work introduces an indoor Battery-Free Wireless Sensing Node powered through radiative Wireless Power Transfer (WPT). The proposed platform targets secure, energyefficient active sensing and overcomes key limitations of many prior battery-free approaches, which commonly provide neither on-node computation nor cryptographic protection. The node combines temperature, humidity, pressure and Volatile Organic Compound (VOC) measurements with a low-power microcontroller that executes sensor calibration, derives a VOC index, formats the payload, and applies AES-128 encryption before wireless transmission. Energy harvesting and communication are enabled by a 1-bit controlled Backscatter Rectenna (BR), which both scavenges incident RF power and produces an orthogonally polarized backscattered signal for robust polarimetric operation. Experimental results validate reliable multi-sensor readout and encrypted data transfer, while maintaining a very low energy budget for the complete sense-compute-encrypt-transmit cycle.

0.29