CS Paper Radar

Joint Target-Tag Estimation in Ambient Backscatter-Based ISAC

Awadhesh Gupta, Kumar Vijay Mishra, Naveen K. D. Venkategowda, Aditya K. Jagannatham

eess.SP ·submitted 2026-10-04 07:30 UTC · v1
top venuetheory

Abstract

Integrated sensing and communication (ISAC) has emerged as a key paradigm for unifying radar sensing and wireless communications within a shared hardware and spectral framework. In parallel, ambient backscatter communication (AmBC) has gained attention as a low-power solution for enabling passive connectivity by modulating and reflecting existing radio-frequency signals. Motivated by these developments, this paper investigates an integrated sensing and ambient backscatter communication (ISABC) framework in which a dual-functional radar-communication (DFRC) transceiver jointly performs high-resolution target sensing and low-power tag detection in cluttered environments. Within this ISAC and AmBC setting, we develop a comprehensive system model that jointly captures the estimation of target and clutter parameters, including delay, Doppler shift, and complex reflectivity, together with the recovery of embedded AmBC tag symbols. The resulting DFRC signal model reveals strong coupling among direct-path reflections, clutter echoes, and passive backscatter signals, leading to a highly entangled estimation problem. To address this challenge, we propose a robust three-stage signal processing framework that sequentially estimates target and clutter parameters before detecting the AmBC tag message. This structured approach effectively disentangles the superimposed components, improving both sensing accuracy and communication reliability in ISAC systems. Extensive simulations, benchmarked against the Cramer-Rao lower bound (CRLB), demonstrate the superior estimation performance of the proposed DFRC-based solution. The results further highlight the fundamental trade-offs between sensing accuracy and backscatter communication efficiency in ISABC systems.

Closest papers

Nearest neighbours by meaning across the whole index.

Bistatic UAV-Based 3D SAR Imaging Using Integrated Sensing and Communications Transceivers

eess.SP ·2026-11-09 ·Akanksha Sneh, Krishna Ayyagari, Vivaswan Nawani, Shobha Sundar Ram
similarity 0.65
Abstract

Integrated sensing and communication (ISAC) frameworks enable autonomous systems to jointly perform radar sensing and wireless communication using common spectral and hardware resources. Prior art on ISAC-enabled UAV for SAR focused on monostatic configurations for two-dimensional target imaging. In this work, we propose a bistatic UAV tomographic SAR framework in which the IEEE~802.11ad waveform, RF hardware, and spectral resources are jointly utilized for communication and radar sensing for three-dimensional (3D) localization of complex targets. Specifically, we demonstrate how communication packets transmitted from a master ISAC transceiver UAV to a passive receiver UAV are exploited for timing and frequency synchronization, motion compensation, and 3D localization of targets, without requiring auxiliary infrastructure on the passive receiver for these tasks. We evaluate the proposed framework for localizing automotive targets over elevated terrain, with Monte Carlo simulations modeling synchronization and platform motion errors. The results demonstrate improved localization accuracy compared with conventional InSAR-based localization. The interplay between radar and communication performances are further evaluated using diverse modulation schemes.

0.14

Over-the-Scene Computation: Illumination-Programmed Functional Sensing of Unresolvable Populations

cs.IT cs.ET ·2026-11-05 ·Seyed Mohammad Azimi-Abarghouyi, Christopher G. Brinton
similarity 0.64
Abstract

Decisions about dense populations depend on how much will cross a boundary by a deadline and when the first member arrives. Conventional radar forms a range-Doppler map, whose cells add noise and whose detections merge unresolved members. We introduce over-the-scene computation, where illumination makes the scene compute such functionals without resolving members. With random echo phases, a correlator's mean output energy sums member reflectivities weighted by a kernel set by the waveform and template. The waveform's ambiguity function is this computation's transfer function, determining computable functionals and their noise cost. One readout aggregates members over a small delay-Doppler area but along a line segment growing with duration, longest for the chirp of matching slope among constant-envelope waveforms. Members predicted to share a range lie on such a line, so a chirp's mean beat spectrum is the predicted range profile at a look-ahead horizon set by its rate. For unbiased estimation, a Cramer-Rao bound over all equal-energy waveforms favors resolving members above unit signal-to-noise ratio (SNR) and grouping weaker ones into unit-SNR sets. At 0.65 members per cell, -10 dB member SNR, and one sweep, the chirp's bin sum inside the boundary comes within 16% of this bound in root-mean-square error and, with 77 times fewer samples per horizon, outperforms every unbiased estimator from a coherent processing interval of equal dwell, bandwidth, and energy. No finite set of waveform-template probes determines an unconstrained Rayleigh-fluctuating population's first arrival, but bisection localizes it if first arrivals outweigh later arrivals' sidelobes.

0.34

Multistatic ISAC with Deep Learning-Based Clutter Suppression for 5G and Beyond

cs.NI cs.AIcs.LGeess.SP ·2026-10-29 ·Yalin E. Sagduyu, Tugba Erpek, Sastry Kompella
similarity 0.62
Abstract

Integrated sensing and communications (ISAC) systems using 5G and beyond signals of opportunity enable joint wireless sensing and communication using shared infrastructure and spectrum resources. While multistatic ISAC can increase sensing coverage with spatially distributed receivers, dense and dynamic clutter can significantly degrade bistatic range and Doppler estimation, leading to errors in target localization and velocity estimation. This paper presents a multistatic ISAC framework with clutter suppression for high-fidelity estimation of target position and velocity. Distributed clutter is modeled with randomly located scatterers with varying Doppler spreads and radar cross sections to capture dense and dynamic clutter effects. A broad range of conventional signal processing baselines are evaluated for clutter suppression, showing limited robustness under strong clutter conditions. To address this limitation, deep learning-based clutter suppression methods are introduced to improve robustness against dense and dynamic clutter by employing residual and attention-enhanced deep neural network architectures that directly enhance target responses from clutter-contaminated observations. These methods substantially outperform conventional approaches in target position and velocity estimation across diverse clutter conditions in multistatic ISAC.

0.22

Practical Hardware-Efficient ISAC: Enabling Multi-Target Sensing With Few RF Chains

eess.SP ·2026-10-12 ·Zhenkun Zhang, Cunhua Pan, Hong Ren, Jun Tang, Dongming Wang +1 more
theory similarity 0.62
Abstract

Hybrid analog--digital arrays reduce hardware cost in integrated sensing and communications (ISAC), but spatial compression and beam-dependent scan responses complicate multi-target estimation with few radio-frequency (RF) chains. To address these challenges, this paper proposes a burst beam-scanning multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) framework that reuses downlink reference signals for joint range, radial-velocity, elevation, and azimuth estimation. Specifically, a structured global--local dual-tensor estimator separates targets by using scanning observations and refines their parameters from selected-beam RF-chain responses, with delay--Doppler signatures maintaining cross-stage target correspondence. The recovered subarray responses yield closed-form elevation and azimuth estimates through exact sum--difference relations, avoiding small-angle approximations and fine angular grid searches. To further improve Doppler accuracy, spatial-mask-aided weighted least squares exploits the longer inter-burst temporal aperture while resolving phase ambiguity using intra-burst estimates. The joint multi-target Cramér--Rao lower bound (CRLB) and corresponding three-dimensional (3D) positioning bound are also derived to characterize estimation performance. Simulation results show that the proposed scheme achieves near-CRLB estimation accuracy at high transmit powers and centimeter- to millimeter-level 3D positioning with only four RF chains, while maintaining low computational cost.

0.12

A Novel Pulse Radar Framework for ISAC-FD-enabled URLLC Systems

eess.SP ·2026-09-13 ·Atefeh Rezaei, Ata Khalili, Falko Dressler, and Robert Schober
similarity 0.62
Abstract

We propose a novel pulse radar framework for integrated sensing and communication (ISAC) systems supporting full-duplex (FD) ultra-reliable low-latency communication (URLLC). Motivated by the stringent delay and reliability requirements of sixth-generation (6G) URLLC services, our framework integrates pulse-based radar sensing with sporadic packet transmissions for URLLC users while accounting for residual self-interference (SI) inherent in FD systems. We adopt a time-structured approach in which the silent intervals of the radar pulse are opportunistically exploited for communication. A key focus is minimizing the total energy consumption of the base station, which is critical for sustainable radar-assisted wireless networks. To this end, we jointly optimize the sensing pulse width, beamforming vectors, and URLLC scheduling while ensuring communication and sensing quality-of-service (QoS) constraints. We formulate a non-convex mixed-integer optimization problem addressing sensing and communication requirements jointly. Sensing performance, quantified via the Cramer-Rao bound (CRB), is reformulated using the Schur complement. Finite blocklength capacity approximations capture the URLLC constraint, while probabilistic constraints are modeled using cumulative distribution functions. The original non-convex problem is decomposed into two sub-problems via an alternating optimization algorithm. Simulation results reveal important trade-offs between sensing time, energy consumption, and residual SI. Our proposed method improves system performance while explicitly accounting for SI, and demonstrates improved URLLC reliability with reduced energy consumption. The results show that proper design of the sensing duration and FD scheduling yields a flexible ISAC framework capable of robust operation even under strong interference.

0.13

Delay-Doppler Sensing Performance Analysis for MIMO-OFDM ISAC Systems

eess.SP ·2026-09-01 ·Peishi Li, Rang Liu, Qian Liu, Ming Li
published similarity 0.62
Abstract · Accepted by IEEE Globecom 2026

In communication-centric integrated sensing and communication (ISAC), delay-Doppler sensing reuses data-bearing orthogonal frequency division multiplexing (OFDM) signals rather than dedicated radar probing waveforms. Consequently, the resulting range-Doppler map (RDM) is shaped not only by target parameters, but also by communication-symbol randomness and, in multi-antenna transmissions, by spatial beamforming. While existing analyses have largely focused on single-antenna OFDM-ISAC, the delay-Doppler sensing behavior of multi-antenna OFDM-ISAC remains insufficiently understood. This paper analyzes a multi-input multi-output (MIMO)-OFDM-ISAC system in which multiple data streams jointly illuminate a sensing target. We derive second-order moment expressions for the RDM under matched filtering (MF) and reciprocal filtering (RF), and use them to characterize the dynamic range (DR). The analysis reveals two key multi-stream effects. First, under MF, the random superposition of multiple beamformed streams creates an additional RDM floor beyond the modulation-dependent and receiver-noise terms; therefore, constant-modulus signaling no longer eliminates the data-induced pedestal as in single-antenna OFDM-ISAC. Second, under RF, the matched-angle data-induced floor is removed, but the noise floor is amplified according to the reciprocal-power statistics of the beamformed target illumination. These results show that the user-target angular geometry directly governs the MF/RF tradeoff: MF is more robust under weak illumination, whereas RF can achieve a higher DR when reciprocal-noise amplification is mild. Numerical results validate the analysis and demonstrate the distinct geometry-dependent behaviors of MF and RF.

0.14

OFDM-ISAC over Data Payloads: MSE Analysis, Constellation Design, and Experimentation

eess.SP ·2026-08-16 ·Kawon Han, Kaitao Meng, Alexandra Chatzicharistou, Christos Masouros
similarity 0.62
Abstract · 13 pages, 12 figures

Orthogonal frequency division multiplexing (OFDM) is a key waveform for integrated sensing and communication (ISAC) systems due to its high spectral efficiency and inherent compatibility with modern wireless standards. However, its fundamental estimation-theoretic sensing performance under random data modulation remains largely unexplored. This paper presents a unified and explicit performance analysis of OFDM-based ISAC systems for multi-target range estimation, focusing on the distinct impacts of the modulation constellation on the sensing performance. We develop a comprehensive estimation-theoretic framework to characterize the range estimation mean-square error (MSE) for both matched filtering (MF) and reciprocal filtering (RF) sensing receiver architectures. Our theoretical analysis reveals that in multi-target and clutter-rich environments, the sensing performance of the MF receiver is fundamentally limited by the fourth-order moment (kurtosis) of the constellation, which determines the data-dependent sidelobe interference level. In contrast, the RF receiver eliminates such interference at the cost of noise enhancement, with its performance governed by the inverse second-order moment of the constellation. Building on these closed-form MSE derivations, we propose a sensing-receiver specific geometric constellation shaping (GCS) framework. By jointly optimizing the constellation geometry based on the minimum Euclidean distance (MED) and receiver-dependent sensing metrics, we enable a flexible trade-off between communication reliability and sensing precision. Our results demonstrate that the proposed constellation shaping provides significant performance gains and facilitates a tailored sensing and communication trade-off across different receiver architectures in practical over-the-air implementations.

0.46

Ghost Target Elimination in 5G Reference Signals ISAC via Multi-static Multilateration

eess.SP ·2026-11-04 ·Ali Al Khansa, Sami Mekki
benchmark similarity 0.61
Abstract

Integrated Sensing and Communication (ISAC) systems can reuse 5G New Radio (NR) reference signals to enable joint communication and environmental sensing. Among these signals, the Positioning Reference Signal (PRS) is particularly suitable for range and Doppler estimation. However, its comb structure introduces periodic ambiguities that generate ghost targets. Existing solutions resolve these ambiguities by combining PRS with additional signals such as the DeModulation Reference Signal (DMRS), which increases sensing overhead. This paper proposes a PRS-only sensing framework that resolves ambiguities using multi-static observations. Instead of removing ghosts locally at each receiver, the proposed method exploits spatial diversity and performs ambiguity resolution at a fusion anchor. The anchor jointly estimates target locations and ambiguity indices via multilateration across multiple sensing nodes. This approach eliminates the need for additional reference signals while maintaining low receiver complexity. Simulation results show that the proposed method reliably resolves ghost targets and achieves superior detection performance compared to benchmark methods across various scenarios, while significantly enhancing resource efficiency by enabling sensing using PRS-only transmissions.

0.34