CS Paper Radar

Multistatic ISAC with Deep Learning-Based Clutter Suppression for 5G and Beyond

Yalin E. Sagduyu, Tugba Erpek, Sastry Kompella

cs.NI cs.AIcs.LGeess.SP ·submitted 2026-10-29 17:47 UTC · v1

Abstract

Integrated sensing and communications (ISAC) systems using 5G and beyond signals of opportunity enable joint wireless sensing and communication using shared infrastructure and spectrum resources. While multistatic ISAC can increase sensing coverage with spatially distributed receivers, dense and dynamic clutter can significantly degrade bistatic range and Doppler estimation, leading to errors in target localization and velocity estimation. This paper presents a multistatic ISAC framework with clutter suppression for high-fidelity estimation of target position and velocity. Distributed clutter is modeled with randomly located scatterers with varying Doppler spreads and radar cross sections to capture dense and dynamic clutter effects. A broad range of conventional signal processing baselines are evaluated for clutter suppression, showing limited robustness under strong clutter conditions. To address this limitation, deep learning-based clutter suppression methods are introduced to improve robustness against dense and dynamic clutter by employing residual and attention-enhanced deep neural network architectures that directly enhance target responses from clutter-contaminated observations. These methods substantially outperform conventional approaches in target position and velocity estimation across diverse clutter conditions in multistatic ISAC.

Closest papers

Nearest neighbours by meaning across the whole index.

Fourth-Order Co-Channel Interference-Aware OFDM-ISAC Sensing in Cluttered Environments

eess.SP ·2026-09-12 ·Tri Nhu Do, Yosefine Triwidyastuti, Gunes Karabulut Kurt
similarity 0.63
Abstract

In this paper, we develop a sensing-centric receiver for monostatic orthogonal frequency-division multiplexing integrated sensing and communication (OFDM-ISAC) in the simultaneous presence of passive clutter and a non-cooperative co-channel OFDM transmitter. We show that removing the known ISAC symbols maps target and clutter echoes to deterministic delay-Doppler components, while the non-cooperative waveform remains a random, non-Gaussian, generically full-rank residual. Guided by this distinction, we combine moving-target indication for zero-Doppler clutter with a centered diagonal fourth-order statistic for interference identification. To obtain an unbiased fourth-order estimate from phase-aligned proper snapshots, we derive additive and multiplicative finite-sample bias corrections and pair the corrected statistic with a second-order moment to separate interference from Gaussian noise. Fourth order provides identification and presence testing, whereas second order provides the diagonal disturbance-power proxy used for weighting. We further introduce diagonally loaded weights that enforce a range-Doppler aperture-efficiency floor. Simulations show that the interference estimate approaches its theoretical profile as coherent support grows and remains insensitive to deterministic echoes, that the presence test resolves interference well below the level at which weighting matters, and that loaded processing improves target detection while controlling point-spread-function degradation.

0.08

Joint Target-Tag Estimation in Ambient Backscatter-Based ISAC

eess.SP ·2026-10-04 ·Awadhesh Gupta, Kumar Vijay Mishra, Naveen K. D. Venkategowda, Aditya K. Jagannatham
top venuetheory similarity 0.62
Abstract

Integrated sensing and communication (ISAC) has emerged as a key paradigm for unifying radar sensing and wireless communications within a shared hardware and spectral framework. In parallel, ambient backscatter communication (AmBC) has gained attention as a low-power solution for enabling passive connectivity by modulating and reflecting existing radio-frequency signals. Motivated by these developments, this paper investigates an integrated sensing and ambient backscatter communication (ISABC) framework in which a dual-functional radar-communication (DFRC) transceiver jointly performs high-resolution target sensing and low-power tag detection in cluttered environments. Within this ISAC and AmBC setting, we develop a comprehensive system model that jointly captures the estimation of target and clutter parameters, including delay, Doppler shift, and complex reflectivity, together with the recovery of embedded AmBC tag symbols. The resulting DFRC signal model reveals strong coupling among direct-path reflections, clutter echoes, and passive backscatter signals, leading to a highly entangled estimation problem. To address this challenge, we propose a robust three-stage signal processing framework that sequentially estimates target and clutter parameters before detecting the AmBC tag message. This structured approach effectively disentangles the superimposed components, improving both sensing accuracy and communication reliability in ISAC systems. Extensive simulations, benchmarked against the Cramer-Rao lower bound (CRLB), demonstrate the superior estimation performance of the proposed DFRC-based solution. The results further highlight the fundamental trade-offs between sensing accuracy and backscatter communication efficiency in ISABC systems.

0.42

6G ISAC Drone Detection: Signal Processing and Experimental Validation at FR1

eess.SP ·2026-11-03 ·Enrique T. R. Pinto, Marcus Henninger, Lucas Giroto, Markku Juntti, Silvio Mandelli
similarity 0.59
Abstract

Integrated sensing and communications (ISAC) enables mobile networks to detect passive targets such as drones at minimal additional cost. However, in ISAC, a small drone must be detected against strong ground clutter with the limited radio resources left by communications. In this paper, we propose two ISAC target detectors: a coherent detector, which combines all frames and beam dwells of a revisit, and a non-coherent detector, robust to inter-frame clock phase drift. The algorithms leverage per-dwell clutter whitening and the adaptive coherence estimator (ACE) detection statistic to improve performance. Both detectors estimate the range, radial velocity, and azimuth of targets in real time on a laptop graphics processing unit (GPU). Measurements with an FR1 ISAC proof-of-concept system based on a commercial base station show that the coherent detector outperforms the non-coherent one and recovers the full track.

0.32

Vision--RF Cooperative ISAC for Dynamic V2I Networks: Adaptive Beam Management and Semantic Clutter Suppression

eess.SP ·2026-10-19 ·Wenqi~Fan, Ning~Wei, Xiangyu Dong, Ahmad~Bazzi, Guan Gui +3 more
similarity 0.58
Abstract

We develop a vision--radio-frequency (RF) cooperative integrated sensing and communication (ISAC) framework that jointly uses visual priors and RF observations for transmit-side beam control and receiver-side clutter suppression. Within a narrowband snapshot model, visual target priors and historical RF detections guide control in dynamic vehicle-to-infrastructure networks with roadside clutter. In this framework, posterior angular uncertainty determines beam control and the selection between communication-for-sensing and sensing-for-sensing modes. To reduce sensing overhead while accommodating unreliable visual information, we develop a reliability-adaptive beam scanning scheme that allocates a bounded scan budget according to visual target probabilities and RF history, while reserving an adaptive fraction for exploration. At the receiver, visual geometry identifies clutter support, and RF observations estimate the corresponding complex reflection coefficients. Motion-aware residual filtering is then applied before angle--Doppler detection to suppress clutter while preserving slow-moving targets. Furthermore, communication and sensing power allocation is formulated as a per-direction linear program, subject to signal-to-interference-plus-noise ratio constraints evaluated at angles sampled from the posterior distribution and a total-power budget. Simulation results show that the proposed framework improves tracking over static and vision-only beam control and reduces sensing overhead relative to full scanning. The proposed scanning scheme also provides greater robustness to visual blockage than fixed-weight scanning, while the receiver better preserves slow-moving targets than temporal cancellation when visual target information is available.

0.22

Improper Signaling for Clutter-Limited Angle Estimation in ISAC

eess.SP ·2026-11-04 ·Victor Augusto Del Monego, Poliana Basso, Murilo Capponi, Bruno S. Chang, Yahia Medjahdi +2 more
hot direction similarity 0.58
Abstract · 6 pages, 4 figures, submitted to the IEEE International Conference on Communications (ICC), 2027

Integrated sensing and communication (ISAC) transmit designs typically optimize the transmit covariance under proper signaling, leaving the potential sensing benefits of pseudo-covariance unexplored. This paper investigates the conditions under which transmit pseudo-covariance can influence the angle Cramer-Rao bound (CRB) of a deterministic target in the presence of clutter. For a prescribed transmit covariance and a single clutter patch, we establish that CRB sensitivity occurs if and only if the clutter is illuminated, exhibits nonzero non-circularity, and overlaps the angle-informative component of the target response. This characterization demonstrates that angular separation alone does not determine whether transmit impropriety can improve sensing performance. We derive a closed-form optimal incident-field pseudo-variance that minimizes the angle CRB over the set of feasible transmit pseudo-covariances. Under fully non-circular clutter scattering, the optimal design eliminates the clutter-induced CRB penalty. Numerical results for a 32-antenna ISAC system show CRB reductions of up to 99% relative to proper sensing under complete overlap and 30% under partial overlap, as well as up to approximately 7 dB lower clutter-induced CRB penalty across target-clutter separations. These findings identify transmit pseudo-covariance as a conditional sensing design resource whose effectiveness depends on clutter statistics and projected target-clutter geometry.

0.30

Robust Resource Allocation for STAR-RIS-Assisted ISAC Networks Using Deep Learning

cs.PF ·2026-10-19 ·Yuwen Cao, Jiajun Wu, Howard H. Yang, Tomoaki Ohtsuki, Tony Q. S. Quek
theory similarity 0.58
Abstract

In this paper, we focus on investigating the resource allocation in an integrated sensing and communication (ISAC) system assisted by a simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS). Due to the coupled non-convex nature of the optimization problem, solving the above joint resource optimization problem while guaranteeing superior sensing performance is challenging, especially in dynamic environment. To conquer such challenge, prior iterative optimization algorithms have been presented. However, practical implementations of these prior algorithms face notable computational challenges, e.g., the reliance on accurate global channel information and the assumption of ideal phase shifts. In this context, we propose a model-driven deep learning framework for jointly optimizing the transmit beamforming and waveform in ISAC networks with low-overhead. In addition, we adopt the Cramer-Rao lower bound (CRLB) as the sensing performance metric, and the multi-user interference (MUI) energy as the communication performance metric for performance evaluation. Besides, our framework jointly optimizes the transmit beamforming, waveform and the STAR-RIS reflection/transmission coefficient matrices by minimizing the weighted sum of MUI energy and CRLB. Our study also considers the impact of imperfect channel information, making the research scenario more aligned with real-world applications. Simulation results validate that the proposed framework not only achieves higher sum-rate performance comparable to traditional iterative algorithms but also significantly reduces computational complexity in terms of algorithm execution time, as well as exhibits inherent robustness.

0.11

Learning-Based Beam Adaptation for Active/Passive-Aware Monopulse ISAC with Leakage Suppression

eess.SP ·2026-10-02 ·Jafar Norolahi, Alireza Vahid
published similarity 0.58
Abstract · To appear in IEEE CCNC 2027

This paper proposes a learning-based beam adaptation framework for active/passive-aware monopulse integrated sensing and communication (ISAC) with spatial leakage suppression. A single gNB uses a shared array and orthogonal frequency division multiplexing dual-functional radar-communication signaling to jointly support downlink transmission and monopulse sensing. Radar detections and uplink spatial evidence are fused to distinguish cooperative active directions from passive directions, while a protected angular zone limits unintended illumination. Soft Actor-Critic deep reinforcement learning adapts the transmit beam using communication, sensing, leakage, and previous-action feedback. Numerical results show accurate active/passive spatial classification and robust leakage control as the number of passive targets increases from one to twelve. The proposed SAC controller maintains aggregate passive leakage below the prescribed budget across the full sweep and, from two passive targets onward, achieves the highest leakage-compliant sum rate among the considered baselines.

0.39

Integrated Sensing and Communications over Hierarchical Cellular and Cell-Free MIMO Systems

cs.IT eess.SP ·2026-08-19 ·Wei Jiang, Hans D. Schotten
similarity 0.58
Abstract · IEEE Globecom 2026

This paper studies integrated sensing and communications (ISAC) over a hybrid system that seamlessly combines legacy cellular base stations with distributed cell-free (CF) access points (APs). We propose a hierarchical ISAC architecture where a central base station (CBS) serves its near users and simultaneously operates as a monostatic radar for aerial target detection, while distributed APs---many idle under user-centric clustering---act as cost-free bistatic receivers. The CBS jointly handles communication processing and multi-static sensing fusion, reducing fronthaul overhead compared to conventional cell-free ISAC. To achieve this, a five-phase time-division duplexing workflow with precise ISAC role assignment is specified. Closed-form expressions for spectral efficiency and multi-static sensing signal-to-noise ratio analytically characterize the communications--sensing Pareto frontier. Numerical results confirm that the proposed hierarchical design simultaneously achieves higher sum throughput and superior sensing accuracy than conventional cell-free ISAC.

0.29