CS Paper Radar

Bistatic UAV-Based 3D SAR Imaging Using Integrated Sensing and Communications Transceivers

Akanksha Sneh, Krishna Ayyagari, Vivaswan Nawani, Shobha Sundar Ram

eess.SP ·submitted 2026-11-09 06:19 UTC · v1

Abstract

Integrated sensing and communication (ISAC) frameworks enable autonomous systems to jointly perform radar sensing and wireless communication using common spectral and hardware resources. Prior art on ISAC-enabled UAV for SAR focused on monostatic configurations for two-dimensional target imaging. In this work, we propose a bistatic UAV tomographic SAR framework in which the IEEE~802.11ad waveform, RF hardware, and spectral resources are jointly utilized for communication and radar sensing for three-dimensional (3D) localization of complex targets. Specifically, we demonstrate how communication packets transmitted from a master ISAC transceiver UAV to a passive receiver UAV are exploited for timing and frequency synchronization, motion compensation, and 3D localization of targets, without requiring auxiliary infrastructure on the passive receiver for these tasks. We evaluate the proposed framework for localizing automotive targets over elevated terrain, with Monte Carlo simulations modeling synchronization and platform motion errors. The results demonstrate improved localization accuracy compared with conventional InSAR-based localization. The interplay between radar and communication performances are further evaluated using diverse modulation schemes.

Closest papers

Nearest neighbours by meaning across the whole index.

UAV SAR Imaging via Diffusion Posterior Sampling under Non-Ideal Motion in ISAC Systems

eess.SP cs.IT ·2026-10-10 ·Keying Zhu, Le Liang, Jie Yang, Fan Liu, Shi Jin
similarity 0.69
Abstract

Unmanned aerial vehicle-enabled synthetic aperture radar (SAR) offers significant potential for providing communication services to ground users while sensing the surrounding environment in low-altitude integrated sensing and communication (ISAC) systems. However, its practical deployment is challenged by known non-ULM trajectories and unknown position errors, which violate conventional SAR assumptions and cause severe image defocusing. We address these non-ideal impacts by formulating the ISAC SAR imaging as an exact linear inverse problem to accurately model arbitrary trajectories with multiple-input multiple-output orthogonal frequency division multiplexing waveforms. Based on this formulation, we develop a diffusion posterior sampling (DPS)-based super-resolution SAR framework, where a pre-trained diffusion model provides a data-driven image prior and the exact physical model enforces measurement consistency during posterior inference. The inference process is further accelerated for practical implementation. For unknown position errors, we develop a joint iterative DPS and motion compensation (MoCo) optimization algorithm with discrete cosine transform reparameterization and coarse-to-fine spectral scheduling. Simulations demonstrate that our framework achieves high-accuracy reconstruction across diverse trajectories and remarkable super-resolution, maintaining greater than 21.3 dB peak signal-to-noise ratio (PSNR) even under half physical resolution truncation. Under unknown motion errors, the joint DPS and MoCo algorithm achieves 23.65 dB PSNR with a residual position-error estimation error of 0.19 cm.

0.25

3D Radar Imaging from the UAV Nadir

eess.SP ·2026-09-04 ·S. Hamed Javadi, Hichem Sahli, André Bourdoux
top venue similarity 0.67
Abstract · Accepted for publication in IEEE Transactions on Radar Systems

Radars improve the sensing robustness of UAVs by operating under poor lighting and weather conditions and seeing through occlusions such as vegetation. However, they suffer from poor angular resolution, which can be addressed using synthetic aperture radar (SAR) algorithms. State-of-the-art UAV SAR methods operate at a depression angle and are not suitable for sensor fusion applications where the data are collected from areas directly below the UAV (i.e., the UAV nadir). In this paper, we present an interferometric SAR (InSAR) framework for reconstructing 3D images from the UAV nadir using a low-cost multi-input-multi-output (MIMO) mm-wave radar. Additionally, an effective method based on the phase gradient autofocus (PGA) is presented for compensating the phase error across the virtual receive antennas. We demonstrate the effectiveness of our 3D imaging algorithm in both simulation and experimental scenarios.

0.35

Joint Target-Tag Estimation in Ambient Backscatter-Based ISAC

eess.SP ·2026-10-04 ·Awadhesh Gupta, Kumar Vijay Mishra, Naveen K. D. Venkategowda, Aditya K. Jagannatham
top venuetheory similarity 0.65
Abstract

Integrated sensing and communication (ISAC) has emerged as a key paradigm for unifying radar sensing and wireless communications within a shared hardware and spectral framework. In parallel, ambient backscatter communication (AmBC) has gained attention as a low-power solution for enabling passive connectivity by modulating and reflecting existing radio-frequency signals. Motivated by these developments, this paper investigates an integrated sensing and ambient backscatter communication (ISABC) framework in which a dual-functional radar-communication (DFRC) transceiver jointly performs high-resolution target sensing and low-power tag detection in cluttered environments. Within this ISAC and AmBC setting, we develop a comprehensive system model that jointly captures the estimation of target and clutter parameters, including delay, Doppler shift, and complex reflectivity, together with the recovery of embedded AmBC tag symbols. The resulting DFRC signal model reveals strong coupling among direct-path reflections, clutter echoes, and passive backscatter signals, leading to a highly entangled estimation problem. To address this challenge, we propose a robust three-stage signal processing framework that sequentially estimates target and clutter parameters before detecting the AmBC tag message. This structured approach effectively disentangles the superimposed components, improving both sensing accuracy and communication reliability in ISAC systems. Extensive simulations, benchmarked against the Cramer-Rao lower bound (CRLB), demonstrate the superior estimation performance of the proposed DFRC-based solution. The results further highlight the fundamental trade-offs between sensing accuracy and backscatter communication efficiency in ISABC systems.

0.42

Bistatic Delay-Doppler Sensing for 3D Target Localization in Distributed Wi-Fi Systems

eess.SP cs.IT ·2026-10-11 ·Kyungmin Hong, Moein Ahmadi, Thomas Stifter, Mounim A. El Yacoubi, Bhavani Shankar Mysore R
published similarity 0.63
Abstract · 6 pages, 6 figures, 2 tables. Accepted for presentation at the 1st IEEE Conference on Integrated Sensing and Communications (ISAC), Lisbon, …

This paper investigates how bistatic delay information improves the observability and localization performance of 3D moving targets in distributed Wi-Fi sensing. Motivated by emerging IEEE 802.11bf WLAN sensing, we consider one transmitter, multiple distributed receivers, and a single target with unknown position and velocity. We compare Doppler-only sensing with delay-Doppler sensing, in which delay-capable receivers provide additional bistatic path-length information for target localization. We derive the Fisher information matrix (FIM) and the position equivalent FIM (EFIM) for both sensing formulations. The resulting observability analysis shows that Doppler-only localization generically requires six receivers, whereas delay-Doppler localization can become locally identifiable with three receivers under non-degenerate geometry. We further study mixed receiver architectures in which only a subset of receivers provides delay estimates. Simulations with Wi-Fi-like bandwidths confirm the transition and quantify the roles of bandwidth, Doppler noise, receiver geometry, and delay-capable receiver availability.

0.32

Multi-UAV Tracking Evaluation Using 5G Uplink Signals on an O-RAN ISAC Simulation Testbed

cs.NI eess.SP ·2026-08-11 ·Arun K. Gurung, Satha K. Sathananthan
similarity 0.63
Abstract · 25 pages, 3 figures, 12 tables

We evaluate multi-target detection, association and tracking end to end on an O-RAN simulation testbed built from OpenAirInterface, FlexRIC and Sionna RT that repurposes the 5G NR uplink sounding reference signal as a passive radar waveform, and against what a counter-UAS command-and- control (C2) consumer requires rather than by detection alone. Three UAVs differing in altitude, velocity and radar cross section (-8 to -20 dBsm) fly one bistatic pair with an 8-element planar receive array. Once every target is detected the binding limit is contention, not sensitivity - two targets share one nearest detection in about 74% of coherent processing intervals, and targets are detected far more often than they are tracked. Elevation from that array cannot separate targets sharing a range-Doppler cell, but it decides association in 58% of intervals. Concurrent tracks are exported from the RAN Intelligent Controller (RIC) xApp to a C2 fusion node over a SAPIENT interface carrying a calibrated detection confidence, validated at schema level against a mock fusion node. The evaluation is emulation-only on one geometry with 10 noise seeds, the mechanisms are characterized and analyzed to identify the key factors influencing multi-target tracking performance.

0.42

Path-Specific Geometric-Stochastic Channel Model for Scattering from ISAC Targets: A Unified Measurement-Based Characterization of Robots, Humans, and Automobiles at 28 GHz

cs.IT ·2026-10-25 ·Neeraj Varshney, Jelena Senic, Jack Chuang, Samuel Berweger, Steve Blandino +3 more
similarity 0.62
Abstract

This paper develops a channel model for scattering from a broad class of integrated sensing and communication (ISAC) targets-robots, humans, and automobiles-based on a unified measurement campaign at 28~GHz. Nine targets are characterized from numerous transmitter--receiver configurations per target, spanning full bistatic and aspect angles and thus covering backward to forward scattering. Repeated acquisitions are collected for each configuration to capture target motion and dynamics, yielding nearly 117\,000 acquisitions in total. Measurements are collected with a 2~GHz-wide channel sounder equipped with a 256-element phased-array antenna, followed by digital beamforming and super-resolution processing for reliable extraction of multiple paths in delay and 2D angle, with average estimation errors of 0.1~ns and 0.2$^\circ$ respectively. From these measurements, we reduce a \emph{path-specific} channel representation in which the scattering is modeled as a cluster of paths whose center is defined by the bistatic specular \emph{geometry}; the cluster shape is described \emph{stochastically}. To ensure physically grounded spatio--temporal consistency, extracted paths are mapped to incident points on the target, each with an associated radar cross section (RCS) that is compatible with the 3GPP TR~38.901 ISAC channel model, and are subsequently mapped back to path properties for channel synthesis. The resulting statistical distributions are well behaved, physically interpretable, and consistent across targets, geometries, and motion. Comparison between measured and synthesized channel realizations demonstrates close agreement in pathloss trends and fluctuation behavior. Together, these results yield a high-fidelity, measurement-derived channel representation suitable for ISAC simulation, target modeling, and system design.

0.28

Cooperative Target Localization in RIS-Enabled ISAC Systems

eess.SP ·2026-09-30 ·Rouhollah Amiri, Abdollah Ajorloo, Mohammad Mahdi Mojahedian, Ahmad Reza Hassanshahi, Fabiola Colone
similarity 0.62
Abstract

This paper develops a cooperative integrated sensing and communication (ISAC) framework in which a multi-antenna base station (BS) simultaneously localizes a target and serves multiple communication users, a subset of which is equipped with reconfigurable intelligent surfaces (RISs). The Fisher information matrix (FIM) for target positioning is derived, explicitly characterizing its dependence on the BS beamforming coefficients, RIS phase profiles, and bistatic sensing geometry. Under the stated scaling assumptions, coherent RIS phase alignment yields a Fisher-information gain that scales quadratically with the number of RIS elements, whereas independent random phases provide a linear gain in expectation. We formulate a sensing-centric joint active and passive beamforming problem that minimizes the position error bound (PEB) subject to per-user signal-to-interference-plus-noise ratio (SINR) and transmit-power constraints. The resulting non-convex problem is addressed through an iterative successive convex approximation (SCA) procedure that solves a sequence of convex subproblems. We further develop a target localization estimator that fuses one direct time-of-arrival (ToA) measurement, one angle-of-arrival (AoA) measurement, and multiple RIS-assisted indirect ToA measurements. Under small measurement errors and asymptotically efficient first-stage ToA/AoA estimation, the estimator covariance approaches the Cramér--Rao bound (CRB) to first order. Numerical results validate the analytical scaling laws and demonstrate the localization gains enabled by cooperative RIS-equipped users.

0.13

6G ISAC Drone Detection: Signal Processing and Experimental Validation at FR1

eess.SP ·2026-11-03 ·Enrique T. R. Pinto, Marcus Henninger, Lucas Giroto, Markku Juntti, Silvio Mandelli
similarity 0.62
Abstract

Integrated sensing and communications (ISAC) enables mobile networks to detect passive targets such as drones at minimal additional cost. However, in ISAC, a small drone must be detected against strong ground clutter with the limited radio resources left by communications. In this paper, we propose two ISAC target detectors: a coherent detector, which combines all frames and beam dwells of a revisit, and a non-coherent detector, robust to inter-frame clock phase drift. The algorithms leverage per-dwell clutter whitening and the adaptive coherence estimator (ACE) detection statistic to improve performance. Both detectors estimate the range, radial velocity, and azimuth of targets in real time on a laptop graphics processing unit (GPU). Measurements with an FR1 ISAC proof-of-concept system based on a commercial base station show that the coherent detector outperforms the non-coherent one and recovers the full track.

0.32