CS Paper Radar

Bistatic Delay-Doppler Sensing for 3D Target Localization in Distributed Wi-Fi Systems

Kyungmin Hong, Moein Ahmadi, Thomas Stifter, Mounim A. El Yacoubi, Bhavani Shankar Mysore R

eess.SP cs.IT ·submitted 2026-10-11 14:16 UTC · v1
published

Abstract

This paper investigates how bistatic delay information improves the observability and localization performance of 3D moving targets in distributed Wi-Fi sensing. Motivated by emerging IEEE 802.11bf WLAN sensing, we consider one transmitter, multiple distributed receivers, and a single target with unknown position and velocity. We compare Doppler-only sensing with delay-Doppler sensing, in which delay-capable receivers provide additional bistatic path-length information for target localization. We derive the Fisher information matrix (FIM) and the position equivalent FIM (EFIM) for both sensing formulations. The resulting observability analysis shows that Doppler-only localization generically requires six receivers, whereas delay-Doppler localization can become locally identifiable with three receivers under non-degenerate geometry. We further study mixed receiver architectures in which only a subset of receivers provides delay estimates. Simulations with Wi-Fi-like bandwidths confirm the transition and quantify the roles of bandwidth, Doppler noise, receiver geometry, and delay-capable receiver availability.

Comment
6 pages, 6 figures, 2 tables. Accepted for presentation at the 1st IEEE Conference on Integrated Sensing and Communications (ISAC), Lisbon, Portugal, November 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Cross-Room Passive WiFi Tracking: Joint Estimation of Target Trajectory and Virtual Transmitter Location

eess.SP ·2026-09-28 ·Heping Wang, Zhongqin Wang, Henk Wymeersch, J. Andrew Zhang
similarity 0.72
Abstract

Indoor bistatic WiFi sensing must often operate across rooms, where intervening walls block the direct line-of-sight (LOS) path between the transmitter (Tx) and receiver (Rx). Recovering a human trajectory from channel-state-information (CSI)-derived delay, angle-of-arrival (AoA), and Doppler estimates is difficult because the Tx position is often unknown and NLOS propagation is inconsistent with direct-path geometry. This paper presents CoTrack, a self-calibrating passive WiFi tracking scheme that does not require the Tx position. CoTrack extracts one dominant human-induced response and represents its transmitter-side propagation by a virtual Tx, which it estimates jointly with the human trajectory. Because similar measurements can be explained by different virtual-Tx--trajectory pairs, CoTrack uses multi-start nonlinear least squares and accepts an initialization only when the best-fitting candidates concentrate around a common virtual-Tx position. It then applies online alternating optimization for continuous tracking. We analyze the local identifiability of the joint estimation problem and derive the corresponding Cramér--Rao bound. Across six LOS and cross-room NLOS experiments, CoTrack achieves a median trajectory error of 1.14m(80th percentile: 1.42m) and a median virtual-Tx discrepancy of 0.47m(80th percentile: 0.54m).

0.50

Bistatic UAV-Based 3D SAR Imaging Using Integrated Sensing and Communications Transceivers

eess.SP ·2026-11-09 ·Akanksha Sneh, Krishna Ayyagari, Vivaswan Nawani, Shobha Sundar Ram
similarity 0.63
Abstract

Integrated sensing and communication (ISAC) frameworks enable autonomous systems to jointly perform radar sensing and wireless communication using common spectral and hardware resources. Prior art on ISAC-enabled UAV for SAR focused on monostatic configurations for two-dimensional target imaging. In this work, we propose a bistatic UAV tomographic SAR framework in which the IEEE~802.11ad waveform, RF hardware, and spectral resources are jointly utilized for communication and radar sensing for three-dimensional (3D) localization of complex targets. Specifically, we demonstrate how communication packets transmitted from a master ISAC transceiver UAV to a passive receiver UAV are exploited for timing and frequency synchronization, motion compensation, and 3D localization of targets, without requiring auxiliary infrastructure on the passive receiver for these tasks. We evaluate the proposed framework for localizing automotive targets over elevated terrain, with Monte Carlo simulations modeling synchronization and platform motion errors. The results demonstrate improved localization accuracy compared with conventional InSAR-based localization. The interplay between radar and communication performances are further evaluated using diverse modulation schemes.

0.14

Doppler-Only Extended Target Tracking in a Distributed Antenna System

eess.SP ·2026-10-01 ·Baptiste Sambon, Gilles Monnoyer, Luc Vandendorpe, Claude Oestges
similarity 0.61
Abstract · Submitted to IEEE 105th Vehicular Technology Conference: VTC Spring 2027

In modern radar and Integrated Sensing and Communication (ISAC) systems, the conventional point-scatterer assumption becomes increasingly inaccurate due to higher spatial resolution. In this context, Extended Target Tracking (ETT) has grown interest in recent years. However, most existing ETT works are designed for monostatic systems due to the fine time synchronisation or per-node antenna arrays required for ranging and angle estimation in multistatic scenarios. In contrast, this paper proposes a novel approach to extended target tracking in a distributed antenna system, where only bistatic Doppler frequency measurements are available. Doppler-only tracking is particularly attractive as it avoids the two aforementioned issues. To address this Doppler-only extended target tracking problem, we develop a modified Rao-Blackwellised Particle Filter (RBPF) that replaces the standard Kalman update with a particle-specific Extended Kalman Filter update followed by a relinearisation step, handling the non-linearities of both the rigid extended target dynamics and the observation model. Numerical simulations show the effectiveness of the proposed algorithm for accurate extended target tracking under this Doppler-only setting.

0.50

A High-Resolution TOA Estimation Algorithm Based on Compressed Sensing for Coherent Multi-Band Signals

eess.SP ·2026-11-16 ·Jialun Kou, Marc Bauduin, Achiel Colpaert, Zhuangzhuang Cui, Sofie Pollin
similarity 0.59
Abstract · Submitted to IEEE Transactions on Wireless Communications.(06-Feb-2026)

High-resolution time-of-arrival (ToA) estimation is crucial for accurate ranging and localization in future wireless networks. While multi-band operation can synthesize a large virtual bandwidth by probing several separated subbands, the resulting non-contiguous frequency layout induces pronounced sidelobes and dense local maxima in the delay response, making reliable ToA estimation challenging. This paper studies coherent multi-band ToA estimation from a single multi-band channel state information (CSI) snapshot. We derive a multiband least-squares formulation and analyze its point-spread function (PSF) and Cramer-Rao bound (CRB) to characterize the effects of the subband layout on delay accuracy and sidelobe ambiguity. Building on this analysis, we propose a low complexity two-stage particle swarm optimization estimator and incorporate it into orthogonal matching pursuit with a RELAX-type cyclic refinement procedure for multipath delay estimation, mitigating basis mismatch and improving robustness to the dense local maxima induced by non-contiguous multi-band layouts. Numerical results are consistent with the PSF and CRB analyses and show that the proposed framework approaches the CRB in the single-path setting and achieves accurate multipath delay estimation with low computational complexity. Real channel measurements further validate the predicted impact of different subband layouts on delay-estimation performance.

0.28

Joint RF-VLP Position and Velocity Tracking: Bayesian Estimation and Performance Analysis

eess.SP ·2026-11-14 ·Chaedam Son, Si-Hyeon Lee
theory similarity 0.59
Abstract · 13 page, 8 figures, this work has been submitted to the IEEE for possible publication

Visible light positioning (VLP) provides accurate indoor positioning through optical received signal strength (RSS) measurements, while radio-frequency (RF) delay and Doppler measurements offer complementary range and velocity information. Motivated by this complementarity, we investigate joint RF--VLP position and velocity tracking, addressing both recursive state estimation and its fundamental performance characteristics. We formulate a Bayesian maximum a posteriori (MAP) estimation problem that combines optical RSS, RF delay and Doppler measurements, and motion prediction, and develop a Gauss--Newton-based algorithm for recursive tracking. To characterize the estimation limits and the benefits of RF--VLP integration, we derive the Bayesian information matrix and the corresponding Bayesian Cramér--Rao lower bound (BCRLB). We further introduce a state-conditioned information matrix (SCIM), whose inverse coincides with the MAP estimator's mean-squared error matrix under a first-order observation model, enabling tractable analysis of RF-induced information gains. The analysis quantifies the distinct contributions of RF delay and Doppler measurements and reveals different asymptotic estimation-error behaviors with respect to RF and VLP signal-to-noise ratios. Numerical results demonstrate improved position and velocity tracking over the considered baselines, with substantial velocity gains from RF sensing. The results also validate the theoretical asymptotic predictions and show that the inverse of the SCIM closely captures the estimator's error trends.

0.32

Evolution Toward Sensing-Enabled RAN: Practical Bistatic Sensing via Uplink

eess.SP ·2026-10-14 ·Kenan Turbic, Khanh-Toan Pham, Slawomir Stanczak
publishedcode/data similarity 0.58
Abstract · Accepted for presentation at IEEE ISAC 2026

This paper considers uplink channel state information (CSI)-based sensing as an opportunistic approach to enabling sensing in cellular networks, with minimum required modifications to the infrastructure. A practical sensing signal processing procedure is presented, combining 5G positioning function with multi-antenna array processing for passive target localization. The approach is validated through simulation and practical experiments with a software-defined radio-based setup, utilizing open-source software frameworks and commercially available hardware components. Results demonstrate feasibility of the uplink CSI-based sensing for detection, localization and tracking of moving targets over local areas.

0.47

Path-Specific Geometric-Stochastic Channel Model for Scattering from ISAC Targets: A Unified Measurement-Based Characterization of Robots, Humans, and Automobiles at 28 GHz

cs.IT ·2026-10-25 ·Neeraj Varshney, Jelena Senic, Jack Chuang, Samuel Berweger, Steve Blandino +3 more
similarity 0.58
Abstract

This paper develops a channel model for scattering from a broad class of integrated sensing and communication (ISAC) targets-robots, humans, and automobiles-based on a unified measurement campaign at 28~GHz. Nine targets are characterized from numerous transmitter--receiver configurations per target, spanning full bistatic and aspect angles and thus covering backward to forward scattering. Repeated acquisitions are collected for each configuration to capture target motion and dynamics, yielding nearly 117\,000 acquisitions in total. Measurements are collected with a 2~GHz-wide channel sounder equipped with a 256-element phased-array antenna, followed by digital beamforming and super-resolution processing for reliable extraction of multiple paths in delay and 2D angle, with average estimation errors of 0.1~ns and 0.2$^\circ$ respectively. From these measurements, we reduce a \emph{path-specific} channel representation in which the scattering is modeled as a cluster of paths whose center is defined by the bistatic specular \emph{geometry}; the cluster shape is described \emph{stochastically}. To ensure physically grounded spatio--temporal consistency, extracted paths are mapped to incident points on the target, each with an associated radar cross section (RCS) that is compatible with the 3GPP TR~38.901 ISAC channel model, and are subsequently mapped back to path properties for channel synthesis. The resulting statistical distributions are well behaved, physically interpretable, and consistent across targets, geometries, and motion. Comparison between measured and synthesized channel realizations demonstrates close agreement in pathloss trends and fluctuation behavior. Together, these results yield a high-fidelity, measurement-derived channel representation suitable for ISAC simulation, target modeling, and system design.

0.28

Self-Supervised Passive WiFi CSI-Based Motion Tracking with Physics-Informed Deep SSM

eess.SP ·2026-10-25 ·Yifan Feng, Haiyao Yu, Geng Wang, Yunkai Hu, Shenghong Li +3 more
similarity 0.58
Abstract

Inferring target position from WiFi channel state information (CSI) is challenging due to the noisy and heterogeneous nature of CSI-derived observations. Measurements such as angle, delay, and Doppler provide only imperfect information about target position and velocity, particularly in dynamic multipath environments where observation reliability varies. Motivated by this challenge, this paper proposes a physics-informed Bayesian state space framework for passive CSI-based tracking. We introduce a context-conditioned deep state space model (DSSM) that captures temporal motion and environmental dynamics, while adaptively modeling time-varying observation uncertainties. By incorporating geometric constraints, this framework enables heterogeneous CSI measurement modalities to jointly regularize the consistency and confidence of the tracking process. Experimental results demonstrate that the proposed framework yields smoother trajectory estimates with reduced temporal fluctuations and outperforms existing methods in tracking accuracy.

0.18