CS Paper Radar

Path-Specific Geometric-Stochastic Channel Model for Scattering from ISAC Targets: A Unified Measurement-Based Characterization of Robots, Humans, and Automobiles at 28 GHz

Neeraj Varshney, Jelena Senic, Jack Chuang, Samuel Berweger, Steve Blandino, Jian Wang, Camillo Gentile, Nada Golmie

cs.IT ·submitted 2026-10-25 16:06 UTC · v1

Abstract

This paper develops a channel model for scattering from a broad class of integrated sensing and communication (ISAC) targets-robots, humans, and automobiles-based on a unified measurement campaign at 28~GHz. Nine targets are characterized from numerous transmitter--receiver configurations per target, spanning full bistatic and aspect angles and thus covering backward to forward scattering. Repeated acquisitions are collected for each configuration to capture target motion and dynamics, yielding nearly 117\,000 acquisitions in total. Measurements are collected with a 2~GHz-wide channel sounder equipped with a 256-element phased-array antenna, followed by digital beamforming and super-resolution processing for reliable extraction of multiple paths in delay and 2D angle, with average estimation errors of 0.1~ns and 0.2$^\circ$ respectively. From these measurements, we reduce a \emph{path-specific} channel representation in which the scattering is modeled as a cluster of paths whose center is defined by the bistatic specular \emph{geometry}; the cluster shape is described \emph{stochastically}. To ensure physically grounded spatio--temporal consistency, extracted paths are mapped to incident points on the target, each with an associated radar cross section (RCS) that is compatible with the 3GPP TR~38.901 ISAC channel model, and are subsequently mapped back to path properties for channel synthesis. The resulting statistical distributions are well behaved, physically interpretable, and consistent across targets, geometries, and motion. Comparison between measured and synthesized channel realizations demonstrates close agreement in pathloss trends and fluctuation behavior. Together, these results yield a high-fidelity, measurement-derived channel representation suitable for ISAC simulation, target modeling, and system design.

Closest papers

Nearest neighbours by meaning across the whole index.

Electromagnetic Channel Model and Sensing Performance for ISAC: The Case of a Single Cylindrical Scatterer

eess.SP cs.IT ·2026-11-17 ·Gabriele Gradoni, Ahmed Elzanaty, Yadong Yang, Mohsen Khalily, Mahmoud Shahabadi +4 more
top venuetheory similarity 0.63
Abstract · 16 pages; published in IEEE Transactions on Wireless Communications

We propose an electromagnetic wireless channel model for accurate target localization in radar-like sensing scenarios. The model employs a self-consistent method grounded in wave scattering theory and imposing boundary conditions, providing the (impedance) channel transfer matrix for a propagation channel with a single target modeled as a cylindrical scatterer. The model is: 1) physics-based, as it includes electromagnetic interactions between objects; 2) unified, as it is valid in both near- and far-field regions. Within the canonical two-dimensional and 2.5-dimensional configurations with line-source and dipole-source excitations, respectively, the model supports dielectric cylinders with frequency-dependent permittivity. Localization accuracy is assessed via the Cramer-Rao lower bound for a dielectric cylinder with variable position, radius, and dielectric constant. Provisions for future extensions to extended targets are discussed in the context of 3GPP channel modeling.

0.47

Performance Evaluation of Mobile Target Sensing and Tracking Across Multiple Sensing Modes

eess.SP ·2026-10-10 ·Necati Kagan Erkek, Marco Di Renzo, Arman Shojaeifard, Kunjan Shah, Mohammad Heggo +1 more
similarity 0.63
Abstract

Moving extended-target sensing and tracking are studied in a beamformed PRS/OFDM ISAC framework. The target is modeled as a rigid cluster of scatterers whose Tx--target--Rx echoes coherently combine in a MIMO scattering channel. Delay, azimuth/elevation, and Doppler are estimated using PRS matched filtering with delay centroiding, single-cluster 2D-MUSIC, and FFT-based Doppler estimation, then used for independent localization and EKF-based tracking. The framework is evaluated in monostatic and bistatic modes under target-directed, receiver-directed, and omnidirectional beamforming. Simulation results show that EKF tracking reduces the aggregate 3D RMSE from 1.61 m to 1.38 m relative to independent localization. Target-directed beamforming substantially improves tracking accuracy, achieving 1.38 m RMSE compared with 5.91 m and 8.38 m for omnidirectional and receiver-directed beamforming, respectively. The results highlight the importance of target-aware beam management, delay-angle-Doppler fusion, and sensing geometry for mobile-target tracking in ISAC networks.

0.35

Bistatic UAV-Based 3D SAR Imaging Using Integrated Sensing and Communications Transceivers

eess.SP ·2026-11-09 ·Akanksha Sneh, Krishna Ayyagari, Vivaswan Nawani, Shobha Sundar Ram
similarity 0.62
Abstract

Integrated sensing and communication (ISAC) frameworks enable autonomous systems to jointly perform radar sensing and wireless communication using common spectral and hardware resources. Prior art on ISAC-enabled UAV for SAR focused on monostatic configurations for two-dimensional target imaging. In this work, we propose a bistatic UAV tomographic SAR framework in which the IEEE~802.11ad waveform, RF hardware, and spectral resources are jointly utilized for communication and radar sensing for three-dimensional (3D) localization of complex targets. Specifically, we demonstrate how communication packets transmitted from a master ISAC transceiver UAV to a passive receiver UAV are exploited for timing and frequency synchronization, motion compensation, and 3D localization of targets, without requiring auxiliary infrastructure on the passive receiver for these tasks. We evaluate the proposed framework for localizing automotive targets over elevated terrain, with Monte Carlo simulations modeling synchronization and platform motion errors. The results demonstrate improved localization accuracy compared with conventional InSAR-based localization. The interplay between radar and communication performances are further evaluated using diverse modulation schemes.

0.14

Wireless Networks That See: Integrated Sensing and Communication in Complex Environments

cs.NI ·2026-11-01 ·Xingqin Lin
similarity 0.60
Abstract · 7 pages, 6 figures

The same radio interactions that complicate wireless communication can reveal what is happening around a network. Integrated sensing and communication (ISAC) turns these interactions into opportunities to observe unmanned aerial vehicles (UAVs), road vehicles, and industrial mobile robots. Yet a strong echo is not necessarily a reliable object observation: stationary background can conceal motion, reflections can create virtual objects, and one viewpoint can leave part of an object's motion unobserved. This tutorial explains how known cellular signals are used to estimate propagation, suppress stationary background, interpret reflected paths, and combine observations from different sites. UAV examples under a Third Generation Partnership Project (3GPP) stochastic channel model and ray tracing in a San Francisco urban scene illustrate the mechanisms through spatial layouts, channel profiles, and before/after range--Doppler maps. Local checks reduce false outputs, with some loss of detection. Cooperation improves position accuracy for UAVs detected by both a single site and cooperating sites. The examples show how signal resources, measurement reporting, and application needs shape sensing performance, providing practical guidance for sensing services in complex environments.

0.54

What Limits mmWave Human-State Sensing for Robot Perception?

cs.RO cs.HC ·2026-11-06 ·Shuntian Zheng, Guangming Wang, Hongyang He, Shuai He, Yu Guan
similarity 0.59
Abstract

Assistive robots and search-and-rescue platforms require reliable human state sensing in smoke, darkness, and privacy-sensitive environments, where cameras and LiDAR may be unreliable Millimeter-wave radar offers an alternative that works without ambient light, penetrates smoke, and does not capture visual appearance. However, the compact arrays that fit robot size, power, and cost budgets have limited apertures, producing joint-localization errors on the order of decimeters at a few meters, large enough to compromise the safety margins and tracking accuracy a robot depends on. Existing pipelines reduce pose error through frame fusion, multiple viewpoints, return selection, or stronger estimators, but examine one technique at a time, without relating its effect to a shared measurement limit or separating gains from added information from gains from estimator completion. We address this gap with a framework that models the human and environment as one time-varying scattering field and states a Cramer-Rao type error floor for joint localization as a function of bandwidth, aperture, signal-to-noise ratio, fused frame count, phase coherence, and visibility of retained returns. We then use existing frame fusion, multi viewpoint, return selection, and pose estimation methods as matched probes of this floor rather than as competing pipelines. Under the evaluated conditions, experiments on three datasets and a live deployment show these strategies move joint localization error in the predicted directions, for example lowering mean per-joint position error from about 97 to 65 mm with a second viewpoint, while a stronger estimator mainly lowers overall error by completing joints the measurement cannot resolve. These results give the robotics community a principled basis for deciding whether to prioritize observation design or estimator capacity when deploying reliable mmWave human sensing.

0.28

Bistatic Delay-Doppler Sensing for 3D Target Localization in Distributed Wi-Fi Systems

eess.SP cs.IT ·2026-10-11 ·Kyungmin Hong, Moein Ahmadi, Thomas Stifter, Mounim A. El Yacoubi, Bhavani Shankar Mysore R
published similarity 0.58
Abstract · 6 pages, 6 figures, 2 tables. Accepted for presentation at the 1st IEEE Conference on Integrated Sensing and Communications (ISAC), Lisbon, …

This paper investigates how bistatic delay information improves the observability and localization performance of 3D moving targets in distributed Wi-Fi sensing. Motivated by emerging IEEE 802.11bf WLAN sensing, we consider one transmitter, multiple distributed receivers, and a single target with unknown position and velocity. We compare Doppler-only sensing with delay-Doppler sensing, in which delay-capable receivers provide additional bistatic path-length information for target localization. We derive the Fisher information matrix (FIM) and the position equivalent FIM (EFIM) for both sensing formulations. The resulting observability analysis shows that Doppler-only localization generically requires six receivers, whereas delay-Doppler localization can become locally identifiable with three receivers under non-degenerate geometry. We further study mixed receiver architectures in which only a subset of receivers provides delay estimates. Simulations with Wi-Fi-like bandwidths confirm the transition and quantify the roles of bandwidth, Doppler noise, receiver geometry, and delay-capable receiver availability.

0.32

Reliable Doppler Estimation in Asynchronous Moving ISAC Devices via IMU Integration

eess.SP ·2026-09-30 ·Zaman Bhalli, Jacopo Pegoraro, Gianmaria Ventura, Paolo Casari, Michele Rossi
similarity 0.58
Abstract · 6 pages, 5 figures. Submitted to IEEE VTC2027-Spring

We present an Integrated Sensing And Communication (ISAC) framework for the joint estimation of the Doppler frequency of a passive mobile target in a bistatic scenario with clock-asynchronous nodes and where the Receiver (RX) is static but the Transmitter (TX) is mobile. In such a setup, previous geometric solutions are integrated with an Inertial Measurement Unit (IMU) device at the TX, coming up with a truly joint data fusion and estimation algorithm based on extended Kalman filtering. The approach jointly estimates the target Doppler frequency, along with the speed and direction of motion of the TX and it is robust to the unavailability of static paths between the TX and RX pair, a condition that makes previous solutions ineffective. The developed extended Kalman filter strikes a balance between the accuracy of ISAC and the IMU reliability. The proposed solution is validated via numerical simulations, obtaining a median Doppler error of 1.2% with a smartphone-grade IMU under realistic operating conditions.

0.36

Array Rotation in Near-Field ISAC: Communication, Detection, and Estimation Under Low-Complexity Transmit Architectures

eess.SP cs.IT ·2026-10-22 ·Marziyeh Soltani, Mark F. Flanagan
similarity 0.58
Abstract

This paper studies near-field integrated sensing and communication (ISAC) with a rotatable base-station array under an exact spherical-wave propagation model. For a general transmit covariance, we derive a Cramér--Rao bound (CRB) decomposition that separates target-side geometry from transmit-covariance-dependent terms. We then specialize the framework to two representative low-complexity architectures: a single-stream superposition architecture, and a dual-waveform split architecture design. We characterize the communication-, detection-, and estimation-optimal rotations for each architecture using the exact finite-array model. In addition, we show how a second-order approximation yields compact approximate expressions for the optimal rotation angles. We also study uncertainty in the target state used for beamforming design through a correlated Gaussian perturbation model, and derive approximations of the optimal robust rotation angles for target sensing and detection. The analysis shows that the two architectures behave differently under rotation: the single-stream design can align communication and detection tasks, whereas the dual-waveform design exhibits a direct communication--detection tradeoff and can incur a larger communication loss when sensing is prioritized. Numerical results show clear gains over a fixed array orientation, especially for range estimation, and close agreement between the approximate and exact rotation choices. Detection is less affected by target-state errors than estimation in the considered cases.

0.11