CS Paper Radar

Utility-Driven Spatial Data Sampling for UAV-Assisted Scientific Smart Farming

Keiwan Soltani, Sajal K. Das

cs.GT ·submitted 2026-09-04 23:06 UTC · v1

Abstract

Large smart-farming deployments generate continuous scientific data from spatially distributed sensors, including soil, humidity, temperature, crop-health, and pest-related measurements. In vast agricultural fields, however, an energy-constrained unmanned aerial vehicle (UAV) often cannot collect data from every sensor during each mission. Existing UAV-assisted collection methods typically optimize coverage, route length, data volume, or freshness, but they do not always distinguish between data that is merely available and data that is scientifically valuable. This poster introduces a utility-driven spatial sampling framework for UAV-assisted smart farming. The field is partitioned into grid cells, each sized according to the UAV ground coverage range. After an initial exploration phase, each cell receives a scientific utility score based on freshness, redundancy, anomaly likelihood, and model uncertainty. The UAV then selects and visits a subset of high-utility cells under battery and return-to-base constraints. The proposed framework reframes UAV-based collection as adaptive scientific data management rather than exhaustive sensing.

Comment
2 pages, 1 figure. Accepted and presented as a poster at the 38th International Conference on Scalable Scientific Data Management (SSDBM 2026), San Diego, California, August 12-13, 2026

Closest papers

Nearest neighbours by meaning across the whole index.

FLoRa: Flight-Assisted Data Collection from Duty Cycling LoRa Nodes under Energy Constraints

cs.NI cs.LG ·2026-10-06 ·Naresh Babu Kakarla, V. Mahendran
similarity 0.62
Abstract · 20 pages

Data collection using Unmanned Aerial Vehicles (UAVs) is challenging when LoRa IoT Devices (IoTDs) duty-cycle to conserve battery. Under energy constraints, a UAV must decide which IoTDs to visit, in what order, where to hover, and how many times to probe each node, while time-based data freshness decays. Tractably solving this problem requires a multi-level optimization architecture: discrete combinatorial optimization for routing, continuous global optimization for spatial positioning, and sequential decision-making under uncertainty. We propose FLoRa, a Flight-assisted LoRa data collection architecture using Simulated Annealing (SA) for path planning, Covariance Matrix Adaptation Evolution Strategy (CMA-ES) for hover positioning, and Partially Observable Markov Decision Processes (POMDPs) for probing IoTDs. To quantify collection utility from duty-cycling nodes, we introduce the Value of Information for Pull-based systems (VIP), a metric that rewards fresh data and penalizes failed probes, imposing well-posedness and preventing indefinite probing when an IoTD is off. Tracking hard battery constraints on every POMDP sample path requires state augmentation, worsening the curse of dimensionality. For tractability, SA and CMA-ES work on the hard battery constraints, while at the POMDP layer we relax them into soft average constraints via Lagrangian relaxation. Since solving the network-wide POMDP is computationally complex, we decompose it into node-level POMDPs by approximating inter-node time dependency using a forward-decomposition technique. Evaluation shows FLoRa outperforms metaheuristic, greedy, and deep reinforcement learning baselines by 30.6%, 27.8%, and 15.2% in total expected VIP, while increasing node coverage by 24.5%, 29.2%, and 8.8%, and successful collections by 24.3%, 25.6%, and 15.2%, respectively.

0.22

Learning to Optimize UAV Path Planning for Data Sensing in Wireless Sensor Networks

cs.RO cs.NE ·2026-09-15 ·Sijie Ma, Zeyuan Ma, Weijia Cao, Yue-Jiao Gong, Lingling Ma +2 more
similarity 0.59
Abstract

UAVs have emerged as highly flexible platforms for data sensing in Wireless Sensor Networks (WSNs). Path planning for UAVs in such tasks plays a key role to assure remote sensing effectiveness and friendly energy consumption. However, existing approaches show two key limitations: i) they are primarily hand-crafted with certain design biases that harm adaptation on unseen tasks. ii) they predominantly assume idealized spatial complexities of actual environments through simplified simulation, causing them to underperform during real-world deployment. In this paper, we propose a novel learning-assisted planning framework, termed Landscape-Aware Meta Differential Evolution (LAMDE), to tackle the mentioned limitations. The major contributions come from the following aspects. We first re-formulate such UAV path planning problem to embrace challenging constraints. To efficiently navigate this highly constrained space, we propose a bi-level learning to optimize approach, where the meta-level is a trainable algorithm configuration policy that meta-learns an adaptable planning strategy for low-level planning algorithm. To address the potential training data scarcity and distribution shift in real-world environments, we introduce a landscape-aware automatic augmentation scheme that enriches training data. At the low-level, a Differential Evolution algorithm is deployed for solving the path planning tasks. To enhance the solving flexibility, we further design a variable-length encoding strategy that dynamically prunes redundant hover points and optimizes continuous flight parameters concurrently within a unified search space. Based on all proposed designs, we meta-train LAMDE and compare it with representative baselines. Comprehensive experiments demonstrate that LAMDE achieves state-of-the-art performance on the tested complex UAV path planning tasks in WSN data collection scenarios.

0.43

SparsePilot: Belief-Guided Network Planning under Sparse Wireless Measurements

cs.NI ·2026-08-10 ·Xuanhao Luo, Jiayuan Huang, Longyu Zhou, Mingzhe Chen, Yuchen Liu
similarity 0.57
Abstract

Unmanned aerial vehicles (UAVs) have emerged as a promising solution for on-demand wireless coverage planning in urban environments. Existing learning-based UAV control methods, however, typically rely on continuous access to dense user-level received signal strength (RSS) measurements. Such full-observation assumptions are difficult to satisfy in real-world deployments due to the high cost and limited availability of dense wireless feedback. Sparse-feedback decision making under severe observation constraints therefore represents a fundamental challenge. To fill this gap, we propose SparsePilot, a measurement-efficient sensing-control framework that couples active wireless probing with belief-guided network control. SparsePilot formulates spatial probing as a multi-armed bandit problem over grid cells, uses upper confidence bound probing to select informative regions, and aggregates sparse RSS measurements into a coverage belief map. A deep reinforcement learning controller then uses this belief state to generate continuous UAV mobility actions, while the full wireless state remains hidden from the policy. We further provide a theoretical analysis connecting sparse probing, belief estimation error, and the sparse-feedback performance gap. Experiments across seven urban digital twins show that SparsePilot achieves superior coverage restoration performance while using only about 3.1% of the full-observation measurement budget and demonstrates strong cross-scene generalization to unseen urban-scale wireless environments.

0.36

Terrain-Aware Thompson Sampling for Multi-Drone Search and Rescue

cs.RO ·2026-11-10 ·Riana Gagnon Souleiman, Giovanni Beltrame
published similarity 0.56
Abstract · Accepted to the 18th International Symposium on Distributed Autonomous Robotic Systems (DARS 2026)

In this work, we propose a decentralized terrain-aware multi-drone Thompson Sampling algorithm tailored for search and rescue (SAR) applications. A probability distribution of locating a lost person is informed by terrain data, using established SAR models (displacement ring, elevation, watershed, dispersion angle, and track offset) derived from historical SAR case data on lost person behavior. Exploration is conducted by a team of drones using Thompson Sampling, where candidate actions are selected by drawing samples from this probability distribution, represented by a per-cell Gaussian posterior whose mean and variance are updated through Bayesian inference. This approach balances exploration of uncertain regions with exploitation of high-probability areas to locate a lost person. Observation uncertainty is incorporated through fractional forest coverage, which measures the percentage of an observation occluded by tree coverage and accounts for reduced detection performance in densely vegetated areas. Simulations using real SAR case data (YOSAR) evaluate the proposed method against a coverage planner and a probabilistic active search method in search regions of 1.5 and 3.8 square kilometers, with 5, 10, 15, and 20 agents flying at 50 km/hr. We demonstrate that our method achieves a success rate of approximately 87% within 60 to 247 seconds in the 1.5 square kilometer region, and success rates of approximately 75% to 91% within 161 to 466 seconds in the 3.8 square kilometer region, across different agent configurations.

0.36

Real-Time Air Pollution Monitoring and Tracking via Adaptive Density-Driven Multi-UAV Coordination

cs.RO cs.MAeess.SY ·2026-11-15 ·Julian Martinez, Ruchika Singh, Mohammad Afrazi, Kooktae Lee
similarity 0.56
Abstract

Accurate and timely air pollution monitoring and tracking are critical for protecting public health and supporting effective environmental management. This paper presents an adaptive Density-Driven Control (D$^2$C) framework for coordinating multiple unmanned aerial vehicles (UAVs) to track and map dynamically evolving pollutant distributions. The proposed framework extends the D$^2$C strategy to guide UAV trajectories based on predictive pollutant propagation and dynamically updated reference densities. A sensor-driven surrogate plume update mechanism is employed, in which reference samples are propagated using locally sensed concentration gradients and wind estimates through gradient attraction, wind advection, inter-sample repulsion, and stochastic diffusion, enabling UAVs to maintain an accurate spatio-temporal representation of the pollution field. The framework utilizes a coordinated structure where individual UAVs share their local measurements with a central coordinator to maintain a unified set of reference samples, facilitating systematic target allocation and trajectory planning. Simulation results under both mild and strong wind conditions demonstrate that the proposed method significantly outperforms state-of-the-art baselines in terms of Sinkhorn distance. Specifically, in scenarios where the plume drifts beyond a fixed monitoring domain under high-velocity, time-varying wind fields, the tested baseline methods fail to maintain tracking, whereas the proposed D$^2$C framework successfully adapts to the evolving distribution. These findings highlight D$^2$C as an efficient and resilient solution for atmospheric monitoring in dynamic environments.

0.24

Reliability Analysis for Ground-Air Cooperative Wireless-Powered Internet-of-Things

cs.IT ·2026-11-07 ·Xingyu Huang, Zhican Zhong, Yulei Wang, Yalin Liu, Yongqiang Cui +1 more
similarity 0.55
Abstract · 7 pages, 6 figures

Battery-constrained Internet of Things (IoT) devices face significant challenges in maintaining long-term uplink data collection, especially in network-limited scenarios. This paper investigates a Ground-Air cooperative Wireless-Powered IoT network (GA-WPIoT), where ground power beacons (GPBs) provide radio-frequency energy supply and unmanned aerial vehicles (UAVs) serve as flexible aerial access points for IoT data collection. Unlike conventional UAV-enabled wireless-powered solutions, GA-WPIoT decouples energy transfer and data collection, reducing the hardware and energy burden of UAVs. To capture the device-level performance variations among IoT devices, we develop a stochastic geometry-based analytical framework, where UAVs are modeled by a Matérn hard-core point process, IoT devices by a Poisson point process, and GPBs by a finite annular binomial point process. The conditional success probabilities of the GPB-device link (for energy transfer) and the device-UAV link (for data collection) are characterized, and device-level reliability distributions are obtained through the Meta-Distribution based analysis. Numerical results under suburban and urban environments reveal the impacts of UAV altitude and annular GPB deployment on reliability distributions, providing useful guidelines for GA-WPIoT.

0.25

Sensing in Low-altitude Wireless Networks: Systems, Techniques, and Developments

cs.NI ·2026-08-11 ·Zihao Tao, Yiming Zhao, Hongtao Zhao, Zijun Gong, Ying Cui
published similarity 0.55
Abstract · 7 pages, 2 figures

The highly dynamic and safety-critical characteristics of low-altitude airspace render sensing an indispensable component of low-altitude wireless networks (LAWN). Although sensing techniques have been extensively studied under diverse paradigms, a prominent mismatch persists between state-of-the-art sensing schemes and the practical sensing demands of LAWN. To fill this research gap, this article systematically reviews LAWN-oriented sensing from the dimensions of system framework, core technologies, and research trends. Specifically, we first analyze the sensing system framework, covering concepts, services and tasks, nodes and targets, and scenarios for LAWN sensing. Next, we conduct a comparative analysis of existing sensing techniques from the perspectives of propagation medium, cooperation, methodology, and modality, analyzing their advantages and limitations. Then, we summarize promising future research directions for deployable LAWN sensing systems, covering non-cooperative and cooperative sensing, model-driven and data-driven sensing, and model-and-data-driven multi-modal sensing. Finally, we present a case study of a model-and-data-driven multi-modal method for real-time aerial target sensing. Compared with existing surveys on LAWN or sensing, this article delivers a more comprehensive, targeted review exclusively centered on LAWN sensing.

0.23

AGRICAM: A Track-Mounted Crop Pollination Monitoring Robot

cs.CV cs.AIcs.ROeess.SY+1 ·2026-08-29 ·Malika Nisal Ratnayake, Adel N. Toosi, James Cook, Romina Rader, Alan Dorin
similarity 0.55
Abstract · 20 pages, 8 figures

Insect pollination is critical for global food production, yet monitoring pollinators at commercial farm scale remains a challenge. Recent advances in computer vision and deep learning have enabled detailed analysis of pollinator behaviour, but monitoring must trade-off detail against spatial coverage and human or technological resources. This paper presents the Automated Guided Robot for Insect and Crop Activity Monitoring (AGRICAM), a purpose-built robotic system designed to meet the requirements of large-scale pollination monitoring in protected cropping systems. AGRICAM operates autonomously on low-cost, easily installed track for movement along crop rows, without disrupting farm operations or insect behaviour. The platform integrates two RGB cameras, microclimate sensors, GPS and RFID modules, motion sensors, and 4G cellular network connectivity for data transmission. A web interface enables remote device configuration and scheduling. The system autonomously captures video and image data of insects' locations and local environmental conditions. These are transferred to the cloud and analysed using computer vision models to quantify pollinator visitation and spatio-temporal activity variation. We deployed the system on a commercial blueberry farm to demonstrate and test its capability. It successfully mapped insect pollination patterns across 80 m long industrial polytunnels over 30 hours. This data enabled spatial analyses of insect activity we used to confirm a uniform pollinator distribution within polytunnels, as desired by the farm management team. The data also highlighted variation of insect activity associated with time of day and microclimate. AGRICAM therefore has been shown to be a scalable, automated crop pollination monitor that can support data-driven decisions to enhance pollination management, thereby improving crop productivity and food security.

0.61