CS Paper Radar

Sensing in Low-altitude Wireless Networks: Systems, Techniques, and Developments

Zihao Tao, Yiming Zhao, Hongtao Zhao, Zijun Gong, Ying Cui

cs.NI ·submitted 2026-08-11 06:44 UTC · v1
published

Abstract

The highly dynamic and safety-critical characteristics of low-altitude airspace render sensing an indispensable component of low-altitude wireless networks (LAWN). Although sensing techniques have been extensively studied under diverse paradigms, a prominent mismatch persists between state-of-the-art sensing schemes and the practical sensing demands of LAWN. To fill this research gap, this article systematically reviews LAWN-oriented sensing from the dimensions of system framework, core technologies, and research trends. Specifically, we first analyze the sensing system framework, covering concepts, services and tasks, nodes and targets, and scenarios for LAWN sensing. Next, we conduct a comparative analysis of existing sensing techniques from the perspectives of propagation medium, cooperation, methodology, and modality, analyzing their advantages and limitations. Then, we summarize promising future research directions for deployable LAWN sensing systems, covering non-cooperative and cooperative sensing, model-driven and data-driven sensing, and model-and-data-driven multi-modal sensing. Finally, we present a case study of a model-and-data-driven multi-modal method for real-time aerial target sensing. Compared with existing surveys on LAWN or sensing, this article delivers a more comprehensive, targeted review exclusively centered on LAWN sensing.

Comment
7 pages, 2 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Topology-Aware Integrated Sensing, Communication, Charging in Massive Low-Altitude Wireless Network

cs.IT ·2026-10-01 ·Han Yu, Jiajun He, Zhaofeng Liu, Hing Cheung So
published similarity 0.64
Abstract

Future low-altitude wireless networks (LAWNs) are expected to simultaneously support sensing, communication, and charging, resulting in tightly coupled multi-objective optimization problems with strong interdependencies among heterogeneous functions. However, existing multi-objective frameworks typically rely on complex problem-specific formulations and alternating optimization procedures, which suffer from high computational complexity and limited scalability in large-scale, highly dynamic deployments. In this paper, we propose a unified topology-aware (TA) framework that abstracts terrestrial and non-terrestrial devices as nodes, and models their interactions as edges, forming a bipartite graph representation of the LAWN. By leveraging this graph representation, we develop a low-complexity topology reconfiguration algorithm based on a unified resource-adjustment rule. Simulation results demonstrate that the proposed TA-based method consistently outperforms state-of-the-art approaches in multi-functional coordination efficiency, while maintaining robustness and scalability in scenarios involving massive terrestrial and airborne user equipments.

0.34

Utility-Driven Spatial Data Sampling for UAV-Assisted Scientific Smart Farming

cs.GT ·2026-09-04 ·Keiwan Soltani, Sajal K. Das
similarity 0.55
Abstract · 2 pages, 1 figure. Accepted and presented as a poster at the 38th International Conference on Scalable Scientific Data Management (SSDBM 202…

Large smart-farming deployments generate continuous scientific data from spatially distributed sensors, including soil, humidity, temperature, crop-health, and pest-related measurements. In vast agricultural fields, however, an energy-constrained unmanned aerial vehicle (UAV) often cannot collect data from every sensor during each mission. Existing UAV-assisted collection methods typically optimize coverage, route length, data volume, or freshness, but they do not always distinguish between data that is merely available and data that is scientifically valuable. This poster introduces a utility-driven spatial sampling framework for UAV-assisted smart farming. The field is partitioned into grid cells, each sized according to the UAV ground coverage range. After an initial exploration phase, each cell receives a scientific utility score based on freshness, redundancy, anomaly likelihood, and model uncertainty. The UAV then selects and visits a subset of high-utility cells under battery and return-to-base constraints. The proposed framework reframes UAV-based collection as adaptive scientific data management rather than exhaustive sensing.

0.30

Integrated sensing, communications, and identification for low-altitude economy

cs.IT ·2026-10-16 ·Shanxing Zeng, Jun Wang, Ying-Chang Liang
published similarity 0.55
Abstract · 37 pages, 5 figures, 4 tables. Accepted for publication in SCIENCE CHINA Information Sciences

With the rapid development of low-altitude economy (LAE), low-altitude information networks (LAINs) must provide reliable communication, environmental sensing, and target identification to support efficient and safe airspace operation. Although integrated sensing and communications (ISAC) provides a foundation for the joint design of communication and sensing, identification must also be incorporated to meet airspace safety and regulatory requirements. This paper reviews integrated sensing, communications, and identification (ISCAI) for LAE. We first review low-altitude communication, sensing, and identification approaches and explain how representative applications motivate their integration. We then summarize low-altitude ISAC fundamentals, including system architectures, channel modeling, unified signal models, and performance metrics, followed by communication-centric and sensing-centric designs, resource allocation, and aircraft trajectory optimization. Building on these, we introduce ISCAI, focusing on a backscatter communication (BackCom)-based identification mechanism in which backscatter devices serve as electronic license plates for aircraft. We present system and signal models for integrated sensing and identification (ISAI) and ISCAI, together with multifunctional receiver designs and mutual integration gains. Finally, we discuss open problems and future directions, including an information-theoretic framework, artificial intelligence-empowered system design, and reconfigurable intelligent surface-enhanced ISCAI. This review provides a structured perspective on the evolution of LAINs toward integrated communication, sensing, and identification.

0.46

MS-DOTT: A Multi-Modal Dataset for Off-Road Traversability Estimation

cs.RO ·2026-11-02 ·Shivani Subramanyan, Saksham Sharma, Samahith SA, Ahaan Kotian, Suresh Sundaram
published similarity 0.55
Abstract · Accepted to RAAI Conference 2026

Autonomous robots are gaining traction in off-road environments, driven by their rising demand in agriculture, defense, and search-and-rescue operations. However, these environments are inherently unpredictable and navigation remains a formidable challenge given the complex environmental conditions including challenging terrain and varying illumination. Off-road autonomy requires robust perception across multiple spatial scales and imaging modalities, yet most sensing setups struggle to capture both far-field environmental context and near-field terrain detail simultaneously across various illumination conditions. To facilitate development of robust off-road perception and traversability estimation systems, we propose MS-DOTT (Multi-Sensor Dataset for Off-road Terrain Traversability) a comprehensive multi-modal off-road dataset with long-range 3D sensing and short-range, fine-grained perception to facilitate high-fidelity terrain understanding by combining proprioceptive signals for tracking vehicle dynamics with exteroceptive imaging and pointcloud data. The dataset includes trajectories recorded across nominal lighting, low-light, and no-light conditions with diverse 2D and 3D sensing for both long-range large-scale and short-range high-resolution sensing, as well as 4D RADAR measurements that provide velocity estimates for detected pointclouds. We demonstrate the utility of the dataset by adapting a SOTA multi-sensor fusion method for the purpose of traversability estimation. This dataset will aid the robotics community in advancing research and development of methods for traversability estimation, off-road perception and multi-sensor fusion in unstructured environments.

0.21

UW-OCDM for Low-Altitude UAV Communication and Cooperative Sensing

eess.SP cs.IT ·2026-08-21 ·Yi Tao, Zhen Gao, Ziwei Wan, Yuezu Lv, Hua Wang +2 more
published similarity 0.55
Abstract · Manuscript with 22 figures

Integrated sensing and communications (ISAC) is a key enabler for uncrewed aerial vehicles (UAVs) in the low-altitude economy. This paper proposes an ISAC waveform that embeds a unique word (UW) into orthogonal chirp division multiplexing (OCDM), termed UW-OCDM, together with corresponding communication reception and cooperative sensing schemes for high-mobility UAV scenarios. For communication, the embedded UW enables timing synchronization and Doppler estimation and compensation without requiring a separate synchronization sequence. A sparse spatio-temporal channel estimation method exploits the common channel support across multiple receive antennas and consecutive UW observations to support reliable data demodulation. For sensing, the deterministic UW serves as a shared prior that allows distributed base stations to construct sensing dictionaries locally without exchanging random payload symbols in real time. A hierarchical multi-target detection and tracking algorithm integrates direct-path interference suppression, kinematic prediction, multi-candidate screening, off-grid refinement, residual verification, and successive interference cancellation for robust localization with reduced search complexity. Simulation results demonstrate reliable communication and localization in highly dynamic UAV scenarios, while the proposed framework retains low-complexity frequency-domain equalization and reduces transmit-reference sharing overhead and multi-static localization complexity.

0.25

User-Target Pairing for NOMA-Enabled ISAC in Low-Altitude Wireless Networks

eess.SP ·2026-10-06 ·Irfan Azam, Muddasir Rahim, Soumaya Cherkaoui
benchmark similarity 0.54
Abstract

This paper presents a non-orthogonal multiple access (NOMA)-enabled integrated sensing and communication (ISAC) framework for low-altitude wireless networks (LAWN), where an aerial access point simultaneously serves ground users and senses aerial targets. To improve both communication efficiency and sensing reliability, a matching-based user-target pairing (MUTP) scheme is proposed, in which strong and weak channel NOMA users are first paired into NOMA groups and then assigned to sensing targets according to a sensing-aware pairing criterion. Furthermore, an adaptive power allocation (APA) strategy is developed to balance communication quality-of-service requirements and target detection performance. The proposed MUTP-APA scheme is compared with fixed greedy pairing, exhaustive search pairing, and conventional ISAC benchmark schemes under both fixed power allocation and APA. Simulation results show that our proposed scheme achieves higher sum rate, improved worst-target detection probability, and lower communication and sensing outage probabilities compared with conventional ISAC and fixed pairing baselines in NOMA-ISAC LAWN. Moreover, the proposed method closely approaches the exhaustive search benchmark while avoiding the high computational complexity.

0.25

RadioTraj3D: Height-Aware Adaptive Sampling for 3D Radio-Map Reconstruction from Ultra-Sparse Trajectories

eess.SP ·2026-10-30 ·Zixuan Guo, Xiucheng Wang, Wenshuo Chen, Conghao Zhou, Chuan Huang +2 more
similarity 0.54
Abstract

Aerial networks require radio propagation information at unvisited positions and heights to plan routes, select links, and allocate wireless resources. A three-dimensional radio map (3D RM) represents propagation conditions over the service area, enabling these decisions before flight. However, constructing such a map from autonomous aerial vehicle (AAV) measurements is challenging, since radio measurements are available only along the trajectory, whereas the target covers the 3D service volume. Existing methods use fixed AAV trajectories that ignore how building distributions and heights affect electromagnetic propagation, missing the heights most informative for RM reconstruction. To address these issues, we propose RadioTraj3D, which uses building-height information to coordinate measurement selection and layer-wise reconstruction. Building-height variations reveal propagation-sensitive layers that guide height-adaptive sampling. We therefore propose G-METS to select geometry-sensitive heights and allocate an exact budget across edge, corridor, and open regions before channel acquisition. A dual-view reconstructor then integrates local three-dimensional boundaries with full-height context through one bounded coefficient per layer. Simulated outdoor and indoor maps demonstrate state-of-the-art reconstruction across environments and vertical grids. On real-world AAV measurements from the LACN dataset, RadioTraj3D improves peak signal-to-noise ratio by 0.84 dB and reduces normalized mean squared error by 17.5% over Completion AE.

0.32

MultiAltitudeSR: Multi-Altitude Agricultural UAV Image Super-Resolution via Physical Ground Sampling Distance Conditioning

cs.CV ·2026-10-18 ·Xintong Jiang, Yu Tian, Yixue Liu, Valerio Hoyos-Villegas, Viacheslav Adamchuk +1 more
similarity 0.53
Abstract · 27 pages, 12 figures

Unmanned aerial vehicles (UAVs) enable high-throughput platforms for crop monitoring but face a fundamental trade-off between flight altitude and image spatial resolution. Many existing super-resolution (SR) methods for UAV imagery rely on oversimplified synthetic degradation models and are restricted to fixed integer upsampling scales, limiting their ability to handle real-world degradations and varying flight altitudes. This study proposes MultiAltitudeSR, a framework that conditions feature modulation and reconstruction on source and target ground sampling distances (GSDs). MultiAltitudeSR trained jointly on real UAV images at altitudes of 10 to 70 m above ground level supports all 21 source-to-target altitude pairs without pair-specific fine-tuning, covering scale factors ranging from 1.18$\times$ to 6.03$\times$. The framework can be extended to additional source-target GSD combinations by incorporating corresponding image pairs into training. On the 20-to-10 m pair, the model achieved competitive perceptual performance compared with pair-specific baselines, with LPIPS of 0.2236, DISTS of 0.2431, and NIQE of 8.9020. Experiments using the same architecture demonstrated the value of acquiring real-world multi-altitude UAV image pairs for SR training, with real-pair training achieving better average reconstruction performance across the 21 altitude pairs than training with the tested synthetic degradation pipeline. Downstream zero-shot segmentation case studies illustrated task-dependent benefits of super-resolved imagery for crop monitoring, suggesting potential UAV flight-time savings through image acquisition at higher altitudes.

0.25