CS Paper Radar

RadioTraj3D: Height-Aware Adaptive Sampling for 3D Radio-Map Reconstruction from Ultra-Sparse Trajectories

Zixuan Guo, Xiucheng Wang, Wenshuo Chen, Conghao Zhou, Chuan Huang, Ruijin Sun, Nan Cheng

eess.SP ·submitted 2026-10-30 14:20 UTC · v1

Abstract

Aerial networks require radio propagation information at unvisited positions and heights to plan routes, select links, and allocate wireless resources. A three-dimensional radio map (3D RM) represents propagation conditions over the service area, enabling these decisions before flight. However, constructing such a map from autonomous aerial vehicle (AAV) measurements is challenging, since radio measurements are available only along the trajectory, whereas the target covers the 3D service volume. Existing methods use fixed AAV trajectories that ignore how building distributions and heights affect electromagnetic propagation, missing the heights most informative for RM reconstruction. To address these issues, we propose RadioTraj3D, which uses building-height information to coordinate measurement selection and layer-wise reconstruction. Building-height variations reveal propagation-sensitive layers that guide height-adaptive sampling. We therefore propose G-METS to select geometry-sensitive heights and allocate an exact budget across edge, corridor, and open regions before channel acquisition. A dual-view reconstructor then integrates local three-dimensional boundaries with full-height context through one bounded coefficient per layer. Simulated outdoor and indoor maps demonstrate state-of-the-art reconstruction across environments and vertical grids. On real-world AAV measurements from the LACN dataset, RadioTraj3D improves peak signal-to-noise ratio by 0.84 dB and reduces normalized mean squared error by 17.5% over Completion AE.

Closest papers

Nearest neighbours by meaning across the whole index.

AI-Enabled Wireless Propagation Modeling and Radio Environment Maps for 5G Aerial Wireless Networks

eess.SP ·2026-09-22 ·Gautham Reddy, Kürşat Tekbıyık, Bryton Petersen, Antoine Lesage-Landry, Gunes Karabulut Kurt +1 more
similarity 0.64
Abstract · Submitted for possible publication in IEEE JSTEAP

With the gaining prominence of aerial mobility applications, their success depends on the seamless integration of terrestrial and non-terrestrial network connectivity. However, providing reliable connectivity from terrestrial telecommunication networks remains challenging due to multi-cell interference from base stations (BSs) under line-of-sight (LoS) conditions to unmanned aerial vehicles (UAVs), coverage holes caused by antenna sidelobe degradation, localized multipath fading effects, and the high-speed dynamics of aerial users. To model such complexities, often exacerbated by sparse real-world data, this work proposes a dual-stage radio environment map (REM) framework. Our approach physically decouples the channel modeling, where a spatial Transformer first anchors the deterministic, large-scale path loss geometry, while a gated recurrent unit (GRU) subsequently extrapolates the stochastic, localized fast- fading deviations. By reformulating 3D spatial interpolation as a 1D radial sequence prediction task, the framework inherently aligns with the physics of propagation. We evaluate the proposed framework against state-of-the-art baselines, including 3D Kriging, UNet, Mamba, and Inception, using empirical 5G datasets. The results demonstrate improved intra-site generalization across diverse altitudes, user dynamics, and reference signal received power (RSRP) datasets, achieving signal-strength predictions with errors near 3 dB and REM spatial-similarity indices exceeding 0.75. Finally, we examine the influence of REMs and channel rank conditions on UAV channel quality, underscoring the necessity of reliable channel modeling for robust aerial connectivity.

0.23

Return-to-Home Feasible Micro-Aerial Vehicle Exploration for 3D Gaussian Splatting Reconstruction

cs.RO ·2026-10-02 ·Prajit Krisshnakumar, Fan Yang, Koichiro Niinuma
similarity 0.63
Abstract · IEEE/RSJ International Conference on INTELLIGENT ROBOTS & SYSTEMS 2026

Micro aerial vehicles (MAVs) enable rapid indoor 3D reconstruction for inspection and time-critical situational awareness, but must operate under strict flight-time budgets and safety constraints that require explicit return-to-home (RTH) feasibility with a conservative margin. We present a topology-first active reconstruction framework that decouples high-fidelity rendering from navigation. A dense 3D Gaussian Splatting (3DGS) map is optimized as the reconstruction target, while a lightweight Truncated Signed Distance Field (TSDF)/occupancy scaffold supports conservative collision checking and online construction of a sparse 3D Voronoi skeleton roadmap. Since directly extracting roadmaps from TSDF geometry can be unstable under noisy and incomplete online fusion, we validate nodes and edges using carved free-space consistency and dense visibility checks, which suppress behind-wall phantom structure and stabilize planning. Viewpoints are selected on the roadmap using a flight-time-budget-aware objective and a lightweight receding-horizon lookahead to improve non-myopic exploration behavior. We evaluate on photorealistic indoor simulation benchmarks (ReplicaCAD, Gibson, and HM3D), reporting reconstruction coverage/error, RTH success, and computational cost. Results demonstrate improved or competitive performance relative to recent GS-based baselines under identical flight-time budgets.

0.19

Adaptive Calibration of RF Digital Twins via Budget-Constrained Radio Measurement Selection

cs.NI eess.SP ·2026-10-26 ·Yalin E. Sagduyu, Tugba Erpek, Hossein Jafari
similarity 0.63
Abstract

Radio-frequency (RF) digital twins (DTs) enable site-specific wireless propagation prediction by explicitly reconstructing the physical environment and modeling electromagnetic interactions. Although physics-based DTs reduce reliance on exhaustive measurements, systematic bias relative to real radio data arises from environmental uncertainty, material inaccuracies, and geometric abstractions. Calibration using field measurements is therefore necessary but costly under limited sampling budgets. This paper studies active RF DT calibration, in which measurement locations are selected sequentially and in an online manner to estimate a calibration offset under strict measurement budget constraints. A physics-based RF DT pipeline is developed, integrating semantic geospatial data from OpenStreetMap, 3D modeling in Blender, and deterministic ray tracing in Sionna to capture dominant building and foliage effects. This RF DT is calibrated using path-loss measurements collected with software-defined radios. Multiple online calibration strategies that select radio measurement locations are compared, including random sampling, rank-structured sampling with balanced coverage, quasi-Monte Carlo ranked selection, progressive structure-aware allocation, and fully adaptive uncertainty-driven sampling with estimator stabilization. Results demonstrate that adaptive and structure-aware schemes significantly improve both mean and worst-case calibration accuracy, particularly in the low-budget regime for radio measurements.

0.21

Site-specific Channel Modeling Based on Remote-Sensing Maps for 6G Space--Air--Ground Digital Twins

eess.SP ·2026-08-31 ·Peijie Liu, Pan Tang, Jianhua Zhang, Lei Tian, Bin Ao +2 more
similarity 0.63
Abstract · 17 pages, 23 figures, 4 tables

Site-specific channel models are essential for wireless digital twins of 6G space--air--ground communication systems. However, 3D maps are difficult to obtain over wide areas, which limits large-area site-specific channel modeling. To address this issue, this paper proposes a remote-sensing-based augmented ray-tracing channel modeling framework. The framework comprises a deterministic RT branch, a measurement-statistical branch, and an RT augmentation branch. To overcome the difficulty of acquiring large-area 3D maps, the deterministic RT branch reconstructs a 3D RT scene from satellite remote-sensing imagery and calibrates its electromagnetic material parameters using measured path loss. To provide the statistical parameters required for RT augmentation, the measurement-statistical branch establishes the marginal distributions and interparameter dependence models of the channel parameters. Specifically, a wideband UAV channel measurement campaign is conducted at 4.60 GHz, and a proposed multipath estimation method estimates the complex amplitudes, delays, and Doppler shifts of the measured multipath. To bridge the gap between RT predictions and measurements, the RT augmentation branch organizes the RT multipath into LoS, LoS-tail, and NLoS components, generates additional short-delay LoS-tail paths, and reallocates the component and path powers according to the measurement-derived statistics while preserving the total RT received power. The validation results show that the proposed framework reduces the path loss RMSE from 5.45 to 4.35 dB and, relative to calibrated RT, decreases the RMS delay spread and normalized Doppler spread RMSEs by 53.03 and 26.48, respectively. The proposed framework provides a site-specific channel modeling approach for 6G space--air--ground digital-twin studies.

0.26

Online Material-Labeled Environment Reconstruction via Bayesian Multipath Attribution for Low-Altitude ISAC

cs.IT ·2026-09-17 ·Meihui Liu, Shu Sun, Ruifeng Gao, Qiuming Zhu
similarity 0.62
Abstract

Environment reconstruction for low-altitude integrated sensing and communications (ISAC) has largely focused on geometry-centric maps, overlooking material-dependent propagation effects. Material-labeled reconstruction is therefore a key step toward propagation-aware mapping, enabling more physically grounded channel prediction and uncrewed aerial vehicle (UAV) networking. However, constructing such maps from wireless multipath observations is challenging in outdoor multi-building scenarios because multipath components (MPCs) from different facades are mixed, path-to-facade attribution is uncertain, and UAV measurements arrive sequentially under time-varying observation geometries. To address these challenges, we propose a unified online probabilistic framework that represents each reflecting facade as a virtual anchor (VA) and couples Bayesian VA localization, multipath attribution, and material inference. The Bayesian front end estimates facade-level geometry and computes soft MPC-to-VA attribution probabilities using a speculardiffuse likelihood model, thereby accounting for both dominant specular paths and diffuse surface-interacted components. These attribution probabilities are used to construct attribution-aware MPC representations, which are aggregated in a VA-centric manner and mapped by a material inference network to facadelevel material evidence. The resulting evidence is recursively fused through an online Bayesian update to produce stable material posteriors and material-labeled environment maps. Ray-tracing simulations in a representative urban street scenario show that the proposed method substantially outperforms a no-attribution baseline, achieves 93.75% final facade-level material accuracy on a held-out UAV trajectory, and maintains accurate VA-based facade localization.

0.21

MAPLE-RF: Efficient Probabilistic RF Source Localization in Partially Explored Environments

cs.RO eess.SP ·2026-09-17 ·Haozhe Lei, Sundeep Rangan
similarity 0.62
Abstract

Localizing a radio-frequency (RF) transmitter from received signals often requires a model of the environment to predict how obstacles block and reflect the signal. In many robotic applications, however, only a partial map is available, particularly when a robot localizes the source while exploring with simultaneous localization and mapping (SLAM). We study single-snapshot transmitter localization on such partially explored maps and compare two approaches that output a posterior over transmitter locations. The first extends a digital-twin method, which ray-traces every candidate location, to partial maps by treating unexplored space as free and training on mixed map coverage. The second, MAPLE-RF, encodes estimated path angles of arrival and signal-to-noise ratios as grid channels aligned with map knownness, occupancy, and line-of-sight visibility, and a U-Net scores all candidate positions in one pass without simulating propagation at inference. Ray-tracing simulations of indoor environments indicate that training on mixed map coverage is essential for both approaches. The digital-twin approach is more accurate on most single-snapshot metrics, while MAPLE-RF comes close at a query cost that does not depend on the propagation model and is more than two orders of magnitude below a fresh full-grid query with general-purpose ray tracing. Both outperform Gaussian and Gaussian-mixture baselines, and on exploration routes guided by its own estimates, fused MAPLE-RF posteriors place more probability near the source than the compared methods. Code and data will be released.

0.29

UrbanEMF: City-Scale EMF Mapping over a Continuous Urban Area with Real-World Base-Station Deployment

eess.SP ·2026-10-01 ·Shuangning Li, Chenxin Luo, Shanshan Wang, Yarui Zhang, Paul Lagouanelle +1 more
benchmarkdatasetcode/data similarity 0.62
Abstract

Electromagnetic Fields (EMF) mapping is essential for wireless propagation modeling and are fundamental to a wide range of applications, including spectrum awareness, network planning, and integrated sensing and communication (ISAC). However, existing datasets are often limited to spatially separated 2D scenes without real base station (BS) information. To address this gap, we present UrbanEMF, a city-scale EMF mapping dataset constructed from real world urban geometry and physical BS deployments using ray tracing. Unlike conventional single scene-based datasets, UrbanEMF preserves continuous city-scale urban coverage and realistic transmitter location information. It further extends traditional 2D maps by incorporating multiple receiver heights. In addition, both aggregated received signal strength (RSS) maps and path loss maps are provided to characterize complementary aspects of the radio environment. This work provides a realistic and flexible benchmark for developing and evaluating learning-based methods in large-scale urban wireless environments. The code for this work is available at: https://github.com/lemonstudy/UrbanEMF

0.32

KODAMA: Multimodal Digital Twin Reconstruction for Urban RF Propagation Modelling

cs.CV ·2026-09-07 ·Maximiliano Wardle, A. Ryo Koblitz
similarity 0.62
Abstract

3D reconstruction typically strives for geometric fidelity or visual plausibility. Radio frequency digital twins (RFDT) are instead judged by whether communication channels behave in them as they do in the real world. RFDTs promise site-specific channel prediction but current practice forces a choice between coarse automated scenes and hand-built, measurement-calibrated models that take weeks to construct per-site. We present KODAMA, an automated pipeline that reconstructs ray tracing-ready RFDTs at city scale from off-the-shelf geospatial data alone: aerial imagery, LiDAR, and photogrammetry yield terrain and watertight building meshes, while exposure-weighted multi-view fusion of street-level imagery recovers façade relief, electromagnetic materials, and clutter---all without site visits or calibration. Across three sites spanning 3.6 to 28 GHz, KODAMA's uncalibrated predictions achieve single-digit RMSE, reducing point-to-point error by up to 5.35 dB over automated baselines and coming within 0.22 dB of a measurement-calibrated, hand-built RFDT.

0.10