CS Paper Radar

Return-to-Home Feasible Micro-Aerial Vehicle Exploration for 3D Gaussian Splatting Reconstruction

Prajit Krisshnakumar, Fan Yang, Koichiro Niinuma

cs.RO ·submitted 2026-10-02 20:19 UTC · v1

Abstract

Micro aerial vehicles (MAVs) enable rapid indoor 3D reconstruction for inspection and time-critical situational awareness, but must operate under strict flight-time budgets and safety constraints that require explicit return-to-home (RTH) feasibility with a conservative margin. We present a topology-first active reconstruction framework that decouples high-fidelity rendering from navigation. A dense 3D Gaussian Splatting (3DGS) map is optimized as the reconstruction target, while a lightweight Truncated Signed Distance Field (TSDF)/occupancy scaffold supports conservative collision checking and online construction of a sparse 3D Voronoi skeleton roadmap. Since directly extracting roadmaps from TSDF geometry can be unstable under noisy and incomplete online fusion, we validate nodes and edges using carved free-space consistency and dense visibility checks, which suppress behind-wall phantom structure and stabilize planning. Viewpoints are selected on the roadmap using a flight-time-budget-aware objective and a lightweight receding-horizon lookahead to improve non-myopic exploration behavior. We evaluate on photorealistic indoor simulation benchmarks (ReplicaCAD, Gibson, and HM3D), reporting reconstruction coverage/error, RTH success, and computational cost. Results demonstrate improved or competitive performance relative to recent GS-based baselines under identical flight-time budgets.

Comment
IEEE/RSJ International Conference on INTELLIGENT ROBOTS & SYSTEMS 2026

Closest papers

Nearest neighbours by meaning across the whole index.

AirSplan: Risk-Aware Motion Planning for Quadrotors in Cluttered 3D Gaussian Splats

cs.RO ·2026-09-18 ·Seth Isaacson, William Hong, Katherine A. Skinner, Ram Vasudevan
publishedcode/data similarity 0.72
Abstract · To appear in the proceedings of IROS 2026

Quadrotors are increasingly deployed in applications such as agriculture, infrastructure inspection, and maintenance. In each of these applications, the robot must navigate complex scene geometry while remaining strictly collision-free. Unlike in ground domains, even minor collisions for aerial vehicles can result in the loss of the robot. This safety requirement induces a pair of technical challenges. First, the environment must be represented with sufficient fidelity to encode complex structure, even when no ground-truth obstacle data is available. Second, a motion planner must leverage this representation to determine a collision-free path to the goal. This paper proposes a system that addresses these complementary challenges. The proposed method, AirSplan, adopts a normalized variant of 3D Gaussian Splatting that encodes high-fidelity scene geometry. It then applies a novel reachability-based motion planner that leverages the differential flatness of quadrotors to compute continuous-time collision constraints that tightly overapproximate the robot's occupancy. Experiments demonstrate that AirSplan successfully finds a path in 81.2% of challenging test cases, a significant improvement over the nearest baseline method's 51.2%.

0.54

Centralized Multi-UAV Exploration and 3D Reconstruction Using Single-UAV Planners

cs.RO ·2026-09-30 ·João Félix Mendes, Meysam Basiri, Rodrigo Ventura
published similarity 0.72
Abstract · Presented at the IEEE International Conference on Advanced Robotics and Mechatronics (ICARM 2026). To appear in IEEE Xplore

Extending single Unmanned Aerial Vehicles (UAVs) exploration methods to multi-UAV teams can improve coverage speed and robustness, but introduces challenges such as consistent mapping, safe navigation, and deployment strategy. In this work, we present a centralized multi-UAV exploration framework that enables the use of existing single-UAV sampling-based planners in a multi-UAV setting. The proposed architecture allows multiple UAVs to collaboratively explore unknown environments using a shared global Truncated Signed Distance Field (TSDF) map and centralized planning. Building on the voxblox library, we adapt its mapping pipeline to support real-time fusion of depth measurements from multiple UAVs into a common TSDF representation. In addition, inter-UAV collision avoidance and robot self-filtering mechanisms are integrated into the system to ensure safe navigation and prevent reconstruction of other UAVs as static obstacles. The framework is evaluated in simulation using four sampling-based exploration planners - RH-NBVP, KRH-NBVP, AEP, and KAEP - whose core sampling logic is preserved, with only system-level adaptations for multi-UAV operation. Experiments are conducted across multiple environments and under two deployment configurations: Joint Start (JS), where UAVs are initialized in close proximity, and Separated Start (SS), where UAVs are initialized in distinct locations. Results show that SS deployments consistently achieve faster exploration and improved coverage across all planners, highlighting the importance of the deployment strategy in multi-UAV exploration performance.

0.33

Geometry-Aware Online Mapping for 3D Gaussian Splatting SLAM

cs.RO ·2026-08-14 ·Thai Luu, Quan Tran, Hieu Phan, Tuan Dang
top venuecode/data similarity 0.70
Abstract

Recent 3D Gaussian Splatting (3DGS) has enabled efficient photorealistic view synthesis and is rapidly being adopted in simultaneous localization and mapping (SLAM) systems for online mapping. In these systems, a Gaussian map must be expanded and refined incrementally while tracking runs in real time, so initialization and density control directly determine where limited computation and iterations are spent. This contrasts with offline 3DGS reconstruction, where such heuristics can be amortized over long optimization schedules. However, most 3DGS-SLAM pipelines inherit initialization and density-control heuristics from offline reconstruction, which can become brittle under the strict per-keyframe optimization budgets and incremental map growth of online SLAM. In this work, we revisit these heuristics in a decoupled 3DGS-SLAM setting and propose three geometry-aware methods that operate in the mapping thread: transmittance-preserving densification, camera-aware scale initialization from depth and intrinsics, and error-guided densification that focuses new primitives on high-residual regions. Our results show consistent improvements in rendering quality with negligible overhead, highlighting the coupling between photometric residuals and pose uncertainty in online SLAM. We will open-source our code to the community to foster growth and validate reproducibility.

0.52

GS-PRM: Gaussian Visual Roadmap for Image-Goal Navigation

cs.RO ·2026-10-14 ·Ashraf Siddique, Kyung Min Han, Young J. Kim
similarity 0.70
Abstract

Image-goal navigation requires a global planner that connects visually specified endpoints while providing observations that a local policy can follow. Three-dimensional Gaussian Splatting (3DGS) provides map-registered RGB, opacity, and depth renderings, but does not explicitly encode navigable topology. We introduce GS-PRM, a Gaussian visual roadmap whose milestones, local connections, and visual references are constructed directly through 3DGS rendering without deriving an occupancy grid or signed distance field. We define render-based collision-free (RC-free) configurations and paths. Panoramic depth supplies conservative clearance for milestone validation and adaptive coverage, while edge-aligned orthographic rendering tests the robot's swept volume. We establish conditional soundness and sufficient conditions for deterministic query completeness and probabilistic construction completeness of GS-PRM. To validate the performance of GS-PRM, we conduct experiments in both simulated and real-world environments, demonstrating long-horizon navigation using goal-conditioned policies guided by GS-PRM. Compared with a state-of-the-art 3DGS-based navigation system, our GS-PRM-based navigation system achieves up to a twice higher average success rate and reduces travel time by up to 57.2% when both systems complete the navigation task.

0.07

OpenFlyScan: A Quality-Guided Aerial Reconstruction System for Consumer Drones

cs.RO cs.CV ·2026-09-21 ·Zhongrui You, Zhen Li, Junli Liu, Zhigang Wang, Bin Zhao
code/data similarity 0.67
Abstract

3D Gaussian Splatting (3DGS) provides high-fidelity scenes for large-scale embodied simulation, but constructing large-scale urban assets remains constrained by expensive equipment and delayed quality feedback. Preset surveys can leave complex surfaces insufficiently observed, with defects discovered only after reconstruction, requiring return visits and repeated processing. We present OpenFlyScan, a quality-guided aerial reconstruction system for consumer drones that integrates a GS quality model, a reacquisition planner, and a custom-designed mobile app. The model learns from GS rendering errors to predict regional reconstruction quality. Based on these predictions, the planner then generates complementary reacquisition strips to be executed through the app, which also supports automated oblique surveys and data transfer without additional hardware on board. Across real aerial scenes, the model effectively identifies regions that are likely to be poorly reconstructed. In the Expo West field experiment, targeted reacquisition improves PSNR at additional views by 10.95 dB. With consumer drones, OpenFlyScan integrates capture, targeted reacquisition, and reconstruction to support rapid, low-cost urban asset creation. Code and models will be made publicly available at https://openflyscan.github.io/.

0.33

PanoGS-SLAM: Panoramic 3D Gaussian Splatting SLAM

cs.CV ·2026-09-15 ·Yongqi Mao, Hao Shi, Yufan Zhang, Zhonghua Yi, Xiangfei Guo +1 more
code/data similarity 0.67
Abstract

Real-time dense SLAM is a core capability for robotics applications that require robust localization and high- quality mapping in dynamic or fast-changing environments. Recent 3D Gaussian Splatting (3DGS)-based SLAM methods have shown promising performance, but most are designed for narrow-FoV pinhole cameras, where limited angular coverage weakens pose observability and often leads to unstable photo- metric optimization under rapid motion and large viewpoint changes. We present PanoGS-SLAM, the first panoramic dense SLAM system built on 3D Gaussian Splatting. Our method per- forms differentiable rendering and pose optimization directly in the spherical domain, enabling omnidirectional photometric constraints for more stable tracking. To improve geometric consistency and robustness, we introduce (1) a sphere-consistent photometric loss that compensates for the area distortion of equirectangular projection, and (2) a depth-guided Gaussian initialization strategy that stabilizes incremental mapping in newly observed regions. Extensive experiments on both real and synthetic panoramic benchmarks (PALVIO and SynPano) show that PanoGS-SLAM consistently outperforms geometric and GS-based baselines in tracking accuracy and rendering quality, while achieving fast front-end convergence and real-time perfor- mance. In addition, controlled field-of-view experiments reveal a clear monotonic improvement in optimization conditioning and convergence stability as angular coverage increases, high- lighting the fundamental role of sensing geometry in shaping the optimization landscape of differentiable Gaussian-based SLAM. The source code will be made publicly available.

0.32

NavArena: Automated Construction of Goal-Oriented Navigation Benchmarks from 3D Gaussian Splatting Reconstructions

cs.RO ·2026-09-04 ·Junhui Wang, Wei Yang, Xinyao Li, Ningjing Fan, Yuehao Yin +2 more
benchmark similarity 0.67
Abstract

Fixed 3D Gaussian Splatting (3DGS) reconstructions provide realistic novel views but lack the traversability constraints, valid goals, and closed-loop protocols required for navigation evaluation. We introduce NavArena, an automated framework that transforms fixed 3DGS reconstructions into benchmarks for goal-oriented visual navigation. NavArena integrates a frozen 3DGS model for egocentric RGB-D rendering, an occupancy costmap derived from Gaussian density and height statistics for reachability and collision queries, and semantic goal candidates lifted from multi-view open-vocabulary masks. These components support the automatic generation and unified closed-loop evaluation of goal-oriented navigation episodes. Across more than 2{,}000 scenes, NavArena generates 22.2 million expert trajectories. Spatial and semantic evaluations assess the derived navigation representations, while policy rollouts demonstrate the diagnostic value of the unified evaluation protocol. NavArena enables scalable and reproducible navigation evaluation on large-scale 3DGS reconstructions, and all benchmark-generation tools, evaluation protocols, and derived assets will be released publicly.

0.25

2DGS-Planner: Rasterization-based Path Planning in 2D Gaussian Splatting Map

cs.RO ·2026-10-08 ·Jiwon Park, Dong-Uk Seo, Hyun Myung
code/data similarity 0.66
Abstract

Gaussian splatting provides an explicit and efficiently rasterizable scene representation for robot navigation. However, individual Gaussian primitives may not reliably represent obstacles as they are jointly optimized through alpha-composited rendering from a finite set of reconstruction views. We propose 2DGS-Planner, a path planner for ground robots that reads planning-relevant geometry from a 2D Gaussian splatting (2DGS) map through rasterization, rather than treating individual Gaussian primitives as obstacles. During offline roadmap construction, multi-view attribution converts rendered normal dispersion into structural scores for non-ground disks supported by the reconstruction views. These scores guide adaptive node sampling on the ground. Path-aligned orthographic queries validate candidate edges, while cylindrical queries estimate local clearance fields that are cached on the edges. During online planning, graph search initializes a route, and path refinement reuses the cached fields while accounting for the robot's dimensions and ground constraints. Experiments demonstrate improved roadmap connectivity, more accurate clearance estimation, and higher planning success compared with the tested baselines. These results support rasterization as an effective geometric query interface for planning directly on Gaussian maps. Code and data are available at https://2dgs-planner.github.io/

0.28