CS Paper Radar

OpenFlyScan: A Quality-Guided Aerial Reconstruction System for Consumer Drones

Zhongrui You, Zhen Li, Junli Liu, Zhigang Wang, Bin Zhao

cs.RO cs.CV ·submitted 2026-09-21 08:17 UTC · v1
code/data

Abstract

3D Gaussian Splatting (3DGS) provides high-fidelity scenes for large-scale embodied simulation, but constructing large-scale urban assets remains constrained by expensive equipment and delayed quality feedback. Preset surveys can leave complex surfaces insufficiently observed, with defects discovered only after reconstruction, requiring return visits and repeated processing. We present OpenFlyScan, a quality-guided aerial reconstruction system for consumer drones that integrates a GS quality model, a reacquisition planner, and a custom-designed mobile app. The model learns from GS rendering errors to predict regional reconstruction quality. Based on these predictions, the planner then generates complementary reacquisition strips to be executed through the app, which also supports automated oblique surveys and data transfer without additional hardware on board. Across real aerial scenes, the model effectively identifies regions that are likely to be poorly reconstructed. In the Expo West field experiment, targeted reacquisition improves PSNR at additional views by 10.95 dB. With consumer drones, OpenFlyScan integrates capture, targeted reacquisition, and reconstruction to support rapid, low-cost urban asset creation. Code and models will be made publicly available at https://openflyscan.github.io/.

Closest papers

Nearest neighbours by meaning across the whole index.

Return-to-Home Feasible Micro-Aerial Vehicle Exploration for 3D Gaussian Splatting Reconstruction

cs.RO ·2026-10-02 ·Prajit Krisshnakumar, Fan Yang, Koichiro Niinuma
similarity 0.67
Abstract · IEEE/RSJ International Conference on INTELLIGENT ROBOTS & SYSTEMS 2026

Micro aerial vehicles (MAVs) enable rapid indoor 3D reconstruction for inspection and time-critical situational awareness, but must operate under strict flight-time budgets and safety constraints that require explicit return-to-home (RTH) feasibility with a conservative margin. We present a topology-first active reconstruction framework that decouples high-fidelity rendering from navigation. A dense 3D Gaussian Splatting (3DGS) map is optimized as the reconstruction target, while a lightweight Truncated Signed Distance Field (TSDF)/occupancy scaffold supports conservative collision checking and online construction of a sparse 3D Voronoi skeleton roadmap. Since directly extracting roadmaps from TSDF geometry can be unstable under noisy and incomplete online fusion, we validate nodes and edges using carved free-space consistency and dense visibility checks, which suppress behind-wall phantom structure and stabilize planning. Viewpoints are selected on the roadmap using a flight-time-budget-aware objective and a lightweight receding-horizon lookahead to improve non-myopic exploration behavior. We evaluate on photorealistic indoor simulation benchmarks (ReplicaCAD, Gibson, and HM3D), reporting reconstruction coverage/error, RTH success, and computational cost. Results demonstrate improved or competitive performance relative to recent GS-based baselines under identical flight-time budgets.

0.19

CityCode: Building Agent-Operable 3D Cities from Sparse Aerial Observations

cs.CV ·2026-10-13 ·Jiahui Sun, Ran Bi, Yifei Liu, Xiaolong Zhou, Yishuo Xu +6 more
similarity 0.67
Abstract · 13 pages, 4 figures;

Urban spatial intelligence calls for 3D cities that agents can measure, interpret, and modify across successive tasks. Maintaining such cities as persistent, code-based states requires lightweight acquisition and support for consistent state updates without repeated dense reconstruction. We therefore formulate a new setting for grounded urban world construction: generating large-scale, instance-level parameterized 3D cities from one low-altitude aerial RGB image per region and known camera parameters, while recovering metrically scaled buildings and explicit road geometry and connectivity. We introduce CityCode, an agent-operable representation that unifies metric geometry, urban topology, visual semantics, and 3D assets through persistent entity identities, with dependency-aware versioned execution for validated updates and historical restoration. We further develop Air2Code to construct this representation by combining visual structure extraction with adapted metric depth estimation. To address occlusion and incomplete coverage, recovered structure and observed appearance guide generative completion and subsequent structure-aware 3D generation for buildings and backgrounds. Experiments on CitySample-Aerial and UrbanScene3D demonstrate substantially more accurate metric structure recovery and superior visual fidelity to the target cities compared with the evaluated baselines. Across 50 task chains of 50 steps each, CityCode supports continued querying, editing, planning, and historical restoration over evolving city states. Together, CityCode and Air2Code turn sparse aerial observations into persistent, agent-operable urban worlds for long-horizon urban spatial intelligence.

0.18

Pixel-wise Geo-registration of Drone and Satellite Images

cs.CV ·2026-08-28 ·Qingyang Liu, David G Shatwell, Parth Parag Kulkarni, Mubarak Shah
benchmarkdataset similarity 0.65
Abstract

Pixel-level cross-view geo-registration aims to align a query image (e.g., drone) to a geo-referenced satellite map so that every query pixel can be mapped to real-world GPS coordinates. Despite strong progress in cross-view geo-localization, existing benchmarks largely provide only GPS labels, limiting evaluation to a single coordinate per image and leaving dense geodetic alignment underexplored. We introduce SkyReg, a dataset and standardized benchmark for pixel-level drone-to-satellite geo-registration, providing dense per-pixel geo-location supervision across diverse settings (orthographic and perspective), scene types (urban, landmark-centric, suburban/rural), and camera configurations. Using SkyReg, we evaluate a broad set of baselines spanning retrieval, feature matching, homography-based alignment, and feed-forward 3D reconstruction. Finally, cross-view pairs from SkyReg, we train a geometry-aware reconstruction pipeline that achieves state-of-the-art results,improving performance by a significant margin.

0.09

SemLite-GS: Semantic-Selective Parallel Gaussian Splatting for Lightweight Building Reconstruction from UAV Oblique Imagery

cs.CV ·2026-11-15 ·Tengfei Wang, Xin Wang, Zihan Li, Quanjian Ji, Yifei Yu +2 more
code/data similarity 0.64
Abstract

Lightweight 3D building models support urban spatial analysis, but their production often requires dense scene reconstruction, building extraction, and mesh simplification. Although 3D Gaussian Splatting (3DGS) is more efficient than conventional multi-view stereo, existing large-scale methods lack semantic selection and parallel instance-level training. We present SemLite-GS, a building-centric framework that reconstructs lightweight building meshes from large-scale UAV oblique imagery. First, an orthographic reference map establishes globally consistent building identities, which are propagated to oblique views to form camera-instance pairs and regions of interest. Second, semantic-selective parallel PGSR training jointly processes multiple pairs within relevant image regions while updating only target Gaussians; contextual Gaussians remain fixed to preserve visibility. Third, architectural planes extracted from rendered depth, opacity, and normal maps guide signed distance field optimization, producing meshes with adaptive polygon allocation and well-defined structural boundaries. Experiments on multiple large-scale UAV datasets demonstrate that our SemLite-GS substantially reduces building reconstruction time compared with representative full-scene 3DGS methods. With comparable polygon budgets, SemLite-GS achieves superior preservation of dominant planar structures and sharp architectural transitions compared with conventional dense reconstruction followed by mesh decimation. The source code is available at https://github.com/IRIS-LAB-whu/SemLite-GS.

0.17

STARS-GS: Structure-Aware Regularized Gaussian Splatting for Large-Scale Aerial Surface Reconstruction

cs.CV ·2026-09-03 ·Bocheng Li, Wenjuan Zhang, Jie Pan. Dongxu Han, Xuesong Ma, Yiling Yao +1 more
similarity 0.64
Abstract

Large-scale 3D surface reconstruction from aerial imagery is fundamental to geospatial mapping and urban modeling. Recent advances in 3D Gaussian Splatting (3DGS) have demonstrated considerable potential for this task. However, existing methods still face three major challenges in large and complex scenes: scene partitioning may split continuous scene elements across independently optimized sub-regions; geometric constraints mainly focus on the attributes of individual Gaussians while overlooking their local organization; and uniform regularization struggles to accommodate heterogeneous geometric structures. To address these issues, we propose STARS-GS, a structure-aware 3DGS framework for large-scale surface reconstruction. First, we introduce a structure-aware scene partitioning strategy that better preserves continuous scene structures during partitioning and reduces cross-region geometric inconsistencies and stitching artifacts through boundary refinement. Second, we develop neighborhood-aware Gaussian organization that extends geometric constraints from individual primitives to their neighborhood organization, encouraging Gaussians to better conform to local surface geometry. Third, we introduce adaptive surface regularization that adjusts the regularization strength according to local geometric characteristics, promoting geometric consistency in structured regions while preserving plausible variations in unstructured regions. Extensive experiments on large-scale aerial photogrammetry benchmarks demonstrate that STARS-GS consistently outperforms the evaluated Gaussian-based methods in surface reconstruction. It increases the average F1-score from 0.640 for the second-best method to 0.698, corresponding to a relative improvement of approximately 9.1\%, demonstrating effective improvements in geometric accuracy and surface completeness.

0.18

PlanarCityLoc: Breaking Silhouette Ambiguity in LoD Aerial Localization via 3D Planes

cs.CV ·2026-10-19 ·Oussema Dhaouadi, Shao Jie Hu-Chen, Jakob Gollreiter, Samir Jusufi, Nikolas Rieger +8 more
publishedcode/data similarity 0.64
Abstract · WACV 2027 - Project page: https://tum-vision.github.io/PlanarCityLoc/

Aerial visual localization is crucial for autonomous drone navigation in urban environments where GNSS signals are often degraded. Lightweight textureless Level-of-Detail (LoD) city models provide a geometric map alternative to textured assets. Existing silhouette-based methods rely on image-space alignment, which can leave different camera poses indistinguishable and favor incorrect poses when segmentation errors distort the building outlines. We present PlanarCityLoc, which moves beyond silhouette overlap by leveraging the planar geometry of building facades and roofs. Following geometry-aware initialization, we match image-side planar patches to LoD model planes and use the resulting 3D-to-2D correspondences to refine pose with Perspective-n-Point (PnP). The framework uses off-the-shelf geometry and segmentation models without dataset-specific training or fine-tuning. Experiments on UAVD4L-LoDv2 and Swiss-EPFLv2 achieve state-of-the-art localization recall among the evaluated off-the-shelf LoD-based methods. By grounding image-space alignment in 3D planes, PlanarCityLoc enables more accurate aerial localization with lightweight, textureless city maps.

0.62

GeoFF3D: Coordinate-Anchored Feed-Forward Reconstruction for Large-Scale UAV Mapping

cs.CV ·2026-08-28 ·Xiang Yang, Yongli Wang, Yunsheng Zhang, Jun Li, Hao Chen +1 more
code/data similarity 0.64
Abstract

Existing feed-forward 3D reconstruction methods typically process a bounded number of images and recover cameras and geometry in local or internally normalized frames. Extending them to large-scale UAV mapping requires scalable multi-chunk processing and reliable aggregation, while full Sim(3) alignment can become unstable for near collinear trajectories. We present GeoFF3D, which combines a coordinate-anchored model with a spatial large-scale reconstruction framework (SLRF). The model uses georeferenced camera translations and optional geometric priors to predict camera poses and dense point maps directly in a gravity-aligned Z-up metric frame. SLRF partitions images into spatially overlapping chunks, propagates shared-view priors, and aggregates local reconstructions hierarchically, while remaining applicable to different bounded-view models. Across nine aerial mapping blocks, GeoFF3D achieves the best average reconstruction quality, improving F@5 from 0.829 for Pi3X + SLRF to 0.877. On long UAVScenes sequences, it reaches 0.848, compared with 0.687 for Pi3X + SLRF and 0.451 for the strongest evaluated SLAM/streaming baseline. GeoFF3D reconstructs 2,000 images in approximately five minutes, demonstrating scalable and robust large-scale UAV reconstruction.The code is available at https://github.com/yanxian-ll/GeoFF3D.

0.40

VDGS: Visibility-Driven Large-Scale 3D Gaussian Splatting for Aerial Scene Reconstruction

cs.CV ·2026-09-19 ·Haolin Yu, Jiadong Tang, YiXian Wang, Yu Gao, Shi He +3 more
similarity 0.64
Abstract · 8 pages, 6 figures

Large-scale scene reconstruction is a critical foundational technology in robotic autonomous systems such as 3D mapping and autonomous driving. In recent years, 3D Gaussian Splatting (3DGS) has demonstrated remarkable advantages in both visual quality and computational efficiency, making it a promising representation for large-scale scene reconstruction. However, it still faces challenges in large-scale scenes, including excessive memory consumption and uneven viewpoint coverage caused by UAV acquisition, limiting its real-world applications. To address this, we propose VDGS, a novel 3DGS framework that incorporates camera distribution into scene modeling. VDGS introduces visibility-driven statistics for scene anchors to quantify supervision strength. These statistics are further leveraged for scene partitioning and for gradient compensation in under-optimized regions, thereby promoting balanced optimization across different regions. Extensive experiments on multiple large-scale aerial scene datasets demonstrate that, under imbalanced viewpoint distributions, VDGS consistently outperforms existing methods, while maintaining competitive performance in scenarios with more uniform view distributions.

0.26