CS Paper Radar

Centralized Multi-UAV Exploration and 3D Reconstruction Using Single-UAV Planners

João Félix Mendes, Meysam Basiri, Rodrigo Ventura

cs.RO ·submitted 2026-09-30 17:19 UTC · v1
published

Abstract

Extending single Unmanned Aerial Vehicles (UAVs) exploration methods to multi-UAV teams can improve coverage speed and robustness, but introduces challenges such as consistent mapping, safe navigation, and deployment strategy. In this work, we present a centralized multi-UAV exploration framework that enables the use of existing single-UAV sampling-based planners in a multi-UAV setting. The proposed architecture allows multiple UAVs to collaboratively explore unknown environments using a shared global Truncated Signed Distance Field (TSDF) map and centralized planning. Building on the voxblox library, we adapt its mapping pipeline to support real-time fusion of depth measurements from multiple UAVs into a common TSDF representation. In addition, inter-UAV collision avoidance and robot self-filtering mechanisms are integrated into the system to ensure safe navigation and prevent reconstruction of other UAVs as static obstacles. The framework is evaluated in simulation using four sampling-based exploration planners - RH-NBVP, KRH-NBVP, AEP, and KAEP - whose core sampling logic is preserved, with only system-level adaptations for multi-UAV operation. Experiments are conducted across multiple environments and under two deployment configurations: Joint Start (JS), where UAVs are initialized in close proximity, and Separated Start (SS), where UAVs are initialized in distinct locations. Results show that SS deployments consistently achieve faster exploration and improved coverage across all planners, highlighting the importance of the deployment strategy in multi-UAV exploration performance.

Comment
Presented at the IEEE International Conference on Advanced Robotics and Mechatronics (ICARM 2026). To appear in IEEE Xplore

Closest papers

Nearest neighbours by meaning across the whole index.

Return-to-Home Feasible Micro-Aerial Vehicle Exploration for 3D Gaussian Splatting Reconstruction

cs.RO ·2026-10-02 ·Prajit Krisshnakumar, Fan Yang, Koichiro Niinuma
similarity 0.72
Abstract · IEEE/RSJ International Conference on INTELLIGENT ROBOTS & SYSTEMS 2026

Micro aerial vehicles (MAVs) enable rapid indoor 3D reconstruction for inspection and time-critical situational awareness, but must operate under strict flight-time budgets and safety constraints that require explicit return-to-home (RTH) feasibility with a conservative margin. We present a topology-first active reconstruction framework that decouples high-fidelity rendering from navigation. A dense 3D Gaussian Splatting (3DGS) map is optimized as the reconstruction target, while a lightweight Truncated Signed Distance Field (TSDF)/occupancy scaffold supports conservative collision checking and online construction of a sparse 3D Voronoi skeleton roadmap. Since directly extracting roadmaps from TSDF geometry can be unstable under noisy and incomplete online fusion, we validate nodes and edges using carved free-space consistency and dense visibility checks, which suppress behind-wall phantom structure and stabilize planning. Viewpoints are selected on the roadmap using a flight-time-budget-aware objective and a lightweight receding-horizon lookahead to improve non-myopic exploration behavior. We evaluate on photorealistic indoor simulation benchmarks (ReplicaCAD, Gibson, and HM3D), reporting reconstruction coverage/error, RTH success, and computational cost. Results demonstrate improved or competitive performance relative to recent GS-based baselines under identical flight-time budgets.

0.19

Local Path Planning and Obstacle Avoidance for an Omnicopter Platform

cs.RO ·2026-09-03 ·Mikolaj Helinski, Spilios Theodoulis, Mahmoud Hamandi, Abdullah Mohamed Ali, Anthony Tzes +1 more
published similarity 0.71
Abstract · 8 pages, accepted paper at ICUAS 2026

Autonomous unmanned aerial vehicles (UAVs) increasingly operate in cluttered environments where global planners such as RRT* are not directly deployable at control rates. This paper presents a real-time local planning and obstacle avoidance module for an omnidirectional multirotor (omnicopter) by extending the Dynamic Window Approach to six degrees of freedom (6D-DWA). Our method achieves real-time feasibility through (i) local-map voxelisation, (ii) a compact sphere-based approximation of the vehicle geometry, and (iii) adaptive velocity sampling in the 6D search space. To improve reactivity to unknown obstacles, we introduce a context-aware "Agile Mode" that adjusts scoring weights online to trade-off between goal progress, clearance, and heading/facing constraints during evasive manoeuvres. We evaluate our approach in simulation across computational stress tests, dense-waypoint path tracking, and static/unknown obstacle scenarios. Our planner runs consistently within a 0.2s control loop, tracks waypoint-dense global paths with < 0.1m average cross-track error and 13deg average heading error, and avoids collisions in static environments. For unknown obstacle avoidance, Agile Mode achieves 79.3% success for an off-centre obstacle and 41.4% for a centred obstacle, highlighting both the effectiveness of adaptive weighting and remaining limitations in highly constrained geometries.

0.26

Lightweight Path-Aware Frontier Re-ranking for LiDAR-Based UAV Exploration

cs.RO ·2026-11-06 ·Duc Manh Do, Thanh Nguyen Canh, Ngoc Minh Do, Mai Thanh Thai, Xiem HoangVan
published similarity 0.68
Abstract · Accepted for presentation at RIVF 2026 (20th International Conference on Computing and Communication Technologies)

Autonomous 3D exploration with UAVs requires efficient target selection under limited flight time and onboard computation. In conventional Euclidean-distance-based frontier pipelines, geometric distance may poorly represent the actual collision-free travel cost in cluttered environments, leading to inefficient frontier choices. This paper presents a lightweight path-aware frontier re-ranking method for LiDAR-based UAV exploration. The method first retains a small top-N set of promising frontier candidates using a lightweight utility function and then applies time-bounded RRT* planning to estimate their feasible path costs for re-ranking. The path generated for the selected frontier is further reused for navigation to reduce redundant global planning. Experiments in three warehouse-like environments show that the proposed method consistently produces shorter exploration trajectories than conventional frontier baselines, with traveled-distance reductions of up to 14.1%, while reducing exploration time by up to 9.5% in two environments and remaining competitive in the third. The method maintains map detail comparable to the conventional OctoMap-based baseline, demonstrating an effective trade-off between exploration efficiency and mapping quality.

0.22

AGE-Capture: Autonomous, General, and Efficient UAV Capture for High-Fidelity Scene Reconstruction

cs.RO ·2026-11-19 ·Xiaofeng Jin, Ningbo Bu, Matteo Frosi, Yiran Guo, Weilun Ren +1 more
similarity 0.66
Abstract · 18 pages, 20 figures, 11 tables

High-fidelity scene reconstruction with an unmanned aerial vehicle (UAV) requires more than identifying valuable viewpoints: the system must autonomously acquire informative observations and determine task completion under different sensing configurations and limited flight resources. We present AGE-Capture, an autonomous, sensor-adaptive, and efficient active-capture framework for real UAVs. Building on renderability, the framework uses a lightweight online state to evaluate the utility of candidate views, assess task progress, and guide flight execution. By decoupling geometric exploration from reconstruction observations and establishing a unified camera-ray interface, the framework allows different range sensors and RGB camera models to share a reconstruction-driven acquisition pipeline. Reconstruction-frontier viewpoints characterize residual acquisition value for region screening and autonomous termination; dynamics-aware hierarchical planning combined with asynchronous event-driven capture reduces unnecessary inter-region motion, time spent waiting for plans, and repeated observations. Across ten indoor and outdoor simulation scenes, AGE-Capture achieves a mean peak signal-to-noise ratio (PSNR) $3.30$--$3.53\,\mathrm{dB}$ higher than that of the online baselines while using $58.2\%$ of the common mission-time budget on average. Its mean peak GPU memory usage is $91.0\%$--$93.3\%$ lower than that of the same baselines. Experiments with different sensor configurations validate the adaptability of the shared acquisition pipeline, while flights in nine real-world scenes further demonstrate onboard closed-loop operation under practical computational and motion constraints.

0.31

SwarmNxt: Open-source Software-Hardware Platform for Fast and Agile Aerial Swarms

cs.RO ·2026-09-10 ·Charbel Toumieh, Niel Mistry, Benjamin Jarvis, Simon Jeger, Peize Liu +2 more
code/data similarity 0.65
Abstract

Aerial robot swarms have the potential to transform time-critical safety, security, and search-and-rescue operations. By coordinating multiple robots, they can rapidly survey disaster sites, map collapsed or GPS-denied environments, and search cluttered areas faster than a single robot, reducing response times and minimizing risks to first responders. Realizing this potential, however, requires robust autonomous swarm navigation, which remains an active research challenge. Progress is further constrained by existing platforms, as commercial drones are often closed-source or lack the onboard computational resources needed for agile, vision-based collective flight. Moreover, developing, deploying, and maintaining software across multiple aerial robots requires significant engineering effort. To address these challenges, we present SwarmNxt, an open-source software platform built on the open-source OmniNxt drone hardware. SwarmNxt provides an end-to-end toolkit, including detailed hardware assembly instructions with a video tutorial, automation tools for parallel software deployment and swarm-wide updates, and a ROS 2-based framework for autonomous navigation. The platform integrates state-of-the-art control, planning, and depth estimation into a single ROS 2 multi-agent system, providing an open research infrastructure for physical swarm experimentation. We validate SwarmNxt through two real-world experiments: a six-drone swarm performing decentralized planning with high-speed inter-drone collision avoidance, and a four-drone swarm executing collective flight with onboard depth estimation in an obstacle-filled environment. Both experiments were run indoors with global position from external motion capture; perception, planning, and control run onboard.

0.33

DroneDiffusion: Uncertainty-Guided Diffusion Path Planner for UAV Navigation

cs.RO ·2026-11-11 ·Ivan Valuev, Iana Zhura, Valerii Serpiva, Miguel Altamirano Cabrera, Dzmitry Tsetserukou
similarity 0.64
Abstract

We present DroneDiffusion, a perception-aware diffusion planner for local 3-D UAV trajectory generation that explicitly models and avoids failure zones caused by lens flare, overexposure, and reflective surfaces. A vision-language perceptual safety estimator produces a pixel-aligned reliability map that highlights regions of degraded sensing. A denoising diffusion probabilistic model (DDPM) is conditioned on this map together with the onboard RGB image, goal point, and initial velocity to generate egocentric 3-D trajectories. To enforce obstacle avoidance at inference time without retraining, we apply training-free CHOMP guidance over a 3-D Euclidean signed distance field. The model is trained entirely in simulation and deployed zero-shot on a real drone. Reliability conditioning raises the mean perceptual reliability along generated trajectories to 0.71, compared with 0.63 for a geometric baseline, while guidance halves the collision rate of the learned prior from 14.7% to 7.8%. Perceptual safety conditioning and geometric guidance are therefore complementary: treating sensor reliability as a first-class signal reduces incursions into unreliable regions while maintaining competitive navigation performance.

0.42

AirSplan: Risk-Aware Motion Planning for Quadrotors in Cluttered 3D Gaussian Splats

cs.RO ·2026-09-18 ·Seth Isaacson, William Hong, Katherine A. Skinner, Ram Vasudevan
publishedcode/data similarity 0.64
Abstract · To appear in the proceedings of IROS 2026

Quadrotors are increasingly deployed in applications such as agriculture, infrastructure inspection, and maintenance. In each of these applications, the robot must navigate complex scene geometry while remaining strictly collision-free. Unlike in ground domains, even minor collisions for aerial vehicles can result in the loss of the robot. This safety requirement induces a pair of technical challenges. First, the environment must be represented with sufficient fidelity to encode complex structure, even when no ground-truth obstacle data is available. Second, a motion planner must leverage this representation to determine a collision-free path to the goal. This paper proposes a system that addresses these complementary challenges. The proposed method, AirSplan, adopts a normalized variant of 3D Gaussian Splatting that encodes high-fidelity scene geometry. It then applies a novel reachability-based motion planner that leverages the differential flatness of quadrotors to compute continuous-time collision constraints that tightly overapproximate the robot's occupancy. Experiments demonstrate that AirSplan successfully finds a path in 81.2% of challenging test cases, a significant improvement over the nearest baseline method's 51.2%.

0.54

Extended LASMP: Language Aided Subset Sampling Based Motion Planner for Drone Navigation

cs.RO cs.AI ·2026-10-25 ·Saswati Bhattacharjee, Anirban Sinha, Mukulika Ghosh, Chinwe Ekenna
similarity 0.64
Abstract

This paper proposes a command-aligned sampling distribution that incorporates navigation commands directly into the exploration process to improve the efficiency of sampling-based motion planning for quadcopters in three-dimensional environments. Inspired by the Language-Aided Subset Sampling Motion Planner, this paper extends command-aware subset sampling to aerial systems. Subset sampling is generalized to command-aligned regions, enabling structured 3D exploration while preserving probabilistic completeness. Natural language instructions are grounded into yaw-conditioned and altitude-aware geometric constraints using a prompt-based large language model for entity extraction and instruction validation. Extensive simulations in complex environments demonstrate that the proposed method generates collision-free, consistent trajectories while significantly reducing sampling effort compared to uniform RRT-based planners.

0.26