CS Paper Radar

AGE-Capture: Autonomous, General, and Efficient UAV Capture for High-Fidelity Scene Reconstruction

Xiaofeng Jin, Ningbo Bu, Matteo Frosi, Yiran Guo, Weilun Ren, Matteo Matteucci

cs.RO ·submitted 2026-11-19 12:55 UTC · v1

Abstract

High-fidelity scene reconstruction with an unmanned aerial vehicle (UAV) requires more than identifying valuable viewpoints: the system must autonomously acquire informative observations and determine task completion under different sensing configurations and limited flight resources. We present AGE-Capture, an autonomous, sensor-adaptive, and efficient active-capture framework for real UAVs. Building on renderability, the framework uses a lightweight online state to evaluate the utility of candidate views, assess task progress, and guide flight execution. By decoupling geometric exploration from reconstruction observations and establishing a unified camera-ray interface, the framework allows different range sensors and RGB camera models to share a reconstruction-driven acquisition pipeline. Reconstruction-frontier viewpoints characterize residual acquisition value for region screening and autonomous termination; dynamics-aware hierarchical planning combined with asynchronous event-driven capture reduces unnecessary inter-region motion, time spent waiting for plans, and repeated observations. Across ten indoor and outdoor simulation scenes, AGE-Capture achieves a mean peak signal-to-noise ratio (PSNR) $3.30$--$3.53\,\mathrm{dB}$ higher than that of the online baselines while using $58.2\%$ of the common mission-time budget on average. Its mean peak GPU memory usage is $91.0\%$--$93.3\%$ lower than that of the same baselines. Experiments with different sensor configurations validate the adaptability of the shared acquisition pipeline, while flights in nine real-world scenes further demonstrate onboard closed-loop operation under practical computational and motion constraints.

Comment
18 pages, 20 figures, 11 tables

Closest papers

Nearest neighbours by meaning across the whole index.

AirPlayground: Benchmarking Aerial Navigation across Diverse Reconstructed Environments

cs.RO ·2026-10-21 ·Rangya Zhang, Yujing Shang, Zhuoyuan Yu, Mingsheng Li, Qingsong Yan +3 more
benchmark similarity 0.69
Abstract

Large-scale aerial resources provide a foundation for learning navigation across diverse environments. However, existing resources remain limited in providing (1) densely sampled flight demonstrations for learning different policy formulations and (2) broad environment coverage for standardized closed-loop evaluation. To address these limitations, we introduce AirPlayground, a unified benchmark for training and evaluating aerial navigation policies across diverse environments. We first construct 94 photorealistic 3D Gaussian Splatting (3DGS) environments spanning indoor, urban outdoor, and vegetation settings, with aligned collision geometry. Building on these environments, we develop a scene-adaptive pipeline for automated expert flight collection, yielding 94K demonstrations and 46.5M synchronized observation-state-action samples at 50 Hz. We further provide an extensible API that supports training different policy formulations on this shared corpus and evaluating them under unified protocols in the corresponding environments. We benchmark seven baselines spanning four policy paradigms across three navigation settings in seen and unseen environments, and further examine scaling behavior with ACT. Scaling ACT's training corpus from 5 to 70 scenes raises median success rates on seen and unseen environments from 30.6% and 16.8% to 41.2% and 29.4%, respectively. Through this shared training and evaluation framework, AirPlayground supports analysis of how offline prediction errors relate to closed-loop outcomes. Our analyses highlight the roles of prediction errors, execution protocols, and scene interactions in closed-loop performance.

0.20

GeoFF3D: Coordinate-Anchored Feed-Forward Reconstruction for Large-Scale UAV Mapping

cs.CV ·2026-08-28 ·Xiang Yang, Yongli Wang, Yunsheng Zhang, Jun Li, Hao Chen +1 more
code/data similarity 0.69
Abstract

Existing feed-forward 3D reconstruction methods typically process a bounded number of images and recover cameras and geometry in local or internally normalized frames. Extending them to large-scale UAV mapping requires scalable multi-chunk processing and reliable aggregation, while full Sim(3) alignment can become unstable for near collinear trajectories. We present GeoFF3D, which combines a coordinate-anchored model with a spatial large-scale reconstruction framework (SLRF). The model uses georeferenced camera translations and optional geometric priors to predict camera poses and dense point maps directly in a gravity-aligned Z-up metric frame. SLRF partitions images into spatially overlapping chunks, propagates shared-view priors, and aggregates local reconstructions hierarchically, while remaining applicable to different bounded-view models. Across nine aerial mapping blocks, GeoFF3D achieves the best average reconstruction quality, improving F@5 from 0.829 for Pi3X + SLRF to 0.877. On long UAVScenes sequences, it reaches 0.848, compared with 0.687 for Pi3X + SLRF and 0.451 for the strongest evaluated SLAM/streaming baseline. GeoFF3D reconstructs 2,000 images in approximately five minutes, demonstrating scalable and robust large-scale UAV reconstruction.The code is available at https://github.com/yanxian-ll/GeoFF3D.

0.40

A Hierarchical Onboard Vision-Language-Navigation Framework for Aerial Robots in Complex Environments

cs.RO cs.AI ·2026-11-18 ·Yuze Wu, Mo Zhu, Xingxing Li, Yuheng Du, Zhaoqi Wang +6 more
top venue similarity 0.68
Abstract · 20 pages, 14 figures

Unmanned Aerial Vehicles (UAVs) are expected to achieve semantic reasoning, intelligent decision-making, and long-horizon navigation under strict onboard constraints. While recent foundation-model-driven approaches have shown promising progress toward this goal, existing methods remain limited by challenges in 3D data availability, trajectory feasibility, long-horizon reasoning, and computational efficiency in complex environments. To bridge these gaps, we propose VLN-AR, a hierarchical vision-language-navigation (VLN) framework for aerial robots. VLN-AR decouples multimodal reasoning and low-level control, enabling structured prediction of 3D pose commands and navigation intentions that are translated into dynamically feasible actions. To mitigate data scarcity and domain gaps, we introduce a fully automated 3D Gaussian Splatting (3DGS)-based pipeline to generate scalable photorealistic UAV navigation data. A progressive three-stage training strategy further enhances grounding, scene reasoning, and complex navigation. In addition, a lightweight cognitive agent improves long-horizon reasoning via memory-aware task decomposition. Finally, we design onboard optimization techniques, including token sparsification and model lightweighting, achieving 7.1x-9.4x speedup while maintaining high navigation performance on resource-limited UAV platforms. Experiments show great improvements over existing methods in both simulation and real-world UAV navigation. Project website: https://wyz000.github.io/VLN-AR/

0.47

Sensor-Layout-Agnostic Navigation via Geometric Observation Canonicalization

cs.RO ·2026-10-06 ·Welf Rehberg, Kostas Alexis
similarity 0.68
Abstract

Existing visual navigation policies are inherently bound to fixed camera configurations, creating a fundamental barrier to zero-shot deployment across heterogeneous robot sensor layouts. To overcome this limitation, we present an embodiment-informed navigation policy capable of generalizing across diverse depth sensor configurations on a specific aerial platform. Instead of implicitly learning spatial alignments, our approach explicitly unprojects depth measurements from arbitrary depth sensor payloads, varying in sensor count, mounting extrinsics, and intrinsics, into a shared robot-centric frame, stitching them into a unified spherical range image and a binary validity mask. This mask allows the downstream policy to explicitly distinguish covered space from unobserved blind spots. Trained via reinforcement learning with aggressive camera randomization, our policy generalizes zero-shot to unseen layouts featuring up to seven cameras, scaling success rates from 78% to 95% as total spatial sensing coverage increases. Finally, real-world flight trials on a physical quadrotor, conducted in an obstacle-filled corridor and an outdoor forest, validate the policy's zero-shot transfer across camera configurations and its resilience to sudden online sensor dropouts.

0.19

Return-to-Home Feasible Micro-Aerial Vehicle Exploration for 3D Gaussian Splatting Reconstruction

cs.RO ·2026-10-02 ·Prajit Krisshnakumar, Fan Yang, Koichiro Niinuma
similarity 0.68
Abstract · IEEE/RSJ International Conference on INTELLIGENT ROBOTS & SYSTEMS 2026

Micro aerial vehicles (MAVs) enable rapid indoor 3D reconstruction for inspection and time-critical situational awareness, but must operate under strict flight-time budgets and safety constraints that require explicit return-to-home (RTH) feasibility with a conservative margin. We present a topology-first active reconstruction framework that decouples high-fidelity rendering from navigation. A dense 3D Gaussian Splatting (3DGS) map is optimized as the reconstruction target, while a lightweight Truncated Signed Distance Field (TSDF)/occupancy scaffold supports conservative collision checking and online construction of a sparse 3D Voronoi skeleton roadmap. Since directly extracting roadmaps from TSDF geometry can be unstable under noisy and incomplete online fusion, we validate nodes and edges using carved free-space consistency and dense visibility checks, which suppress behind-wall phantom structure and stabilize planning. Viewpoints are selected on the roadmap using a flight-time-budget-aware objective and a lightweight receding-horizon lookahead to improve non-myopic exploration behavior. We evaluate on photorealistic indoor simulation benchmarks (ReplicaCAD, Gibson, and HM3D), reporting reconstruction coverage/error, RTH success, and computational cost. Results demonstrate improved or competitive performance relative to recent GS-based baselines under identical flight-time budgets.

0.19

EpiTransfer: Sparse, Training-Free Long-Range Depth Estimation from Temporal Monocular Aerial Frames

cs.RO cs.CV ·2026-09-27 ·Diksha Aggarwal, Rutvik Dagadkhair, Sanjana Srivastava, Bradley Denby, Kevin Kochersberger
similarity 0.67
Abstract

Reliable 3D spatial understanding is essential for autonomous navigation, obstacle avoidance, and scene reconstruction. While state-of-the-art learned depth estimation techniques achieve high accuracy in-distribution, they often generalize poorly to novel viewpoints and altitudes. This paper presents a geometrically derived, training-free depth estimation method using epipolar transfer with only two monocular images and camera pose estimates. By leveraging camera motion to synthesize a virtual stereo pair with a freely chosen baseline, our approach transforms temporal correspondence into a stereo triangulation task while mitigating geometric degeneracies inherent to direct two-view triangulation. Validated across outdoor drone flights (to a maximum range of approximately 90\,m) and indoor OptiTrack environments against LiDAR ground truth, the method achieves an indoor AbsRel of 0.092 and $δ< 1.25$ of 0.940, comparable to direct triangulation (AbsRel 0.073) while retaining valid depth over a larger fraction of challenging scenes, and substantially outperforms off-the-shelf learning-based baselines such as ZoeDepth (AbsRel 0.225) and Depth Anything V2 (AbsRel 0.570), which are not trained or fine-tuned for this domain, with no training data required.

0.16

GRID-UAV: Geometry and Ray-depth Integrated Decision-making for Unmanned Aerial Vehicles

cs.CV ·2026-11-17 ·Anas Anwarul Haq Khan, Amrin Kareem, Muhammad Umer Sheikh, Biplab Banerjee, Muhammad Haris Khan
similarity 0.67
Abstract

Vision-language-action models (VLAs) encode images with 2D encoders that capture little 3D structure. A common approach is to feed the policy estimated depth, but a UAV chooses its own altitude, must judge distances tens of meters away, where monocular depth is less reliable, and must relate its forward and downward views. On long aerial routes, adding depth features directly brings no significant gain (42.5% vs. 42.6% success), so we study how 3D information should be given to the policy. Analyzing flight failures, we find that two forms of 3D grounding fail in opposite ways: explicit 3D lifting of depth collides less on the way but more often fails to finish at the target, while implicit alignment with a 3D geometry model finishes more often but collides more. We propose GRID, which combines both: (1) it lifts monocular depth into ray-corrected 3D positions in the UAV's frame for both cameras, and (2) during training only, it aligns its visual features with a frozen multi-view geometry model, at no inference cost. GRID adding explicit lifting to implicit alignment significantly increases how often the policy reaches the target ($61.5\% \rightarrow 69.5\%$, $p<0.001$), and adding implicit alignment to explicit lifting significantly increases how often it completes the task once there ($57.7\% \rightarrow 61.4\%$, $p<0.05$). On TravelUAV (3,005 test episodes), GRID achieves the best success rate on every split, with relative gains over the state of the art of 9.5% (seen), 17.1% (unseen objects) and 25.4% (unseen map).

0.24

Beyond Memory Limits: A Hierarchical Spatio-Temporal Map Representation for Large-Scale 3D Autonomous Exploration

cs.RO ·2026-11-08 ·Yizhe Zhang, Jianping Li, Yilun Gao, Liangliang Yin, Pengfei Wan +1 more
similarity 0.67
Abstract · 16 pages, 12 figures, preprint submitted to Elsevier

Autonomous UAV exploration is increasingly used for large-scale surveying and inspection in inaccessible or disaster-affected environments, where onboard memory and computational resources are often severely constrained. Most existing UAV exploration systems maintain globally queryable geometric map representations for motion planning and exploration decision-making, causing memory consumption and spatial-query costs to increase with the explored area. Robot-centric local mapping bounds dense-map memory and computation but discards global task context needed for long-horizon exploration.We present FLAVOR, a hierarchical spatio-temporal framework that confines dense metric geometry to a robot-centric local map while retaining compact global observation and task context. At the observation level, lightweight LiDAR-keyframe visibility records preserve ray-wise evidence for frontier reasoning. At the task level, unresolved frontiers beyond the local-map extent are retained as compact pending tasks associated with odometry anchors. A sparse topological graph connects these anchors through retained routes for future revisits.Upon returning to a task region, FLAVOR reconstructs the frontier and exploration viewpoint from observations, while the topological route is instantiated and validated against the current local map before execution. Dense-map capacity remains fixed as exploration expands, with exploration-dependent memory growth confined to compact observation and task context.FLAVOR achieves 31.98--41.88% shorter exploration time and a 94--99% smaller map memory footprint than the best baseline that completes all three simulated scenes. In real-world deployments, it reduces this footprint by 92.67% in the forest and 62.42% at the construction site relative to an explicit point-cloud ikd-tree while preserving long-term task continuity under constrained onboard resources.

0.17