CS Paper Radar

Online Material-Labeled Environment Reconstruction via Bayesian Multipath Attribution for Low-Altitude ISAC

Meihui Liu, Shu Sun, Ruifeng Gao, Qiuming Zhu

cs.IT ·submitted 2026-09-17 07:29 UTC · v1

Abstract

Environment reconstruction for low-altitude integrated sensing and communications (ISAC) has largely focused on geometry-centric maps, overlooking material-dependent propagation effects. Material-labeled reconstruction is therefore a key step toward propagation-aware mapping, enabling more physically grounded channel prediction and uncrewed aerial vehicle (UAV) networking. However, constructing such maps from wireless multipath observations is challenging in outdoor multi-building scenarios because multipath components (MPCs) from different facades are mixed, path-to-facade attribution is uncertain, and UAV measurements arrive sequentially under time-varying observation geometries. To address these challenges, we propose a unified online probabilistic framework that represents each reflecting facade as a virtual anchor (VA) and couples Bayesian VA localization, multipath attribution, and material inference. The Bayesian front end estimates facade-level geometry and computes soft MPC-to-VA attribution probabilities using a speculardiffuse likelihood model, thereby accounting for both dominant specular paths and diffuse surface-interacted components. These attribution probabilities are used to construct attribution-aware MPC representations, which are aggregated in a VA-centric manner and mapped by a material inference network to facadelevel material evidence. The resulting evidence is recursively fused through an online Bayesian update to produce stable material posteriors and material-labeled environment maps. Ray-tracing simulations in a representative urban street scenario show that the proposed method substantially outperforms a no-attribution baseline, achieves 93.75% final facade-level material accuracy on a held-out UAV trajectory, and maintains accurate VA-based facade localization.

Closest papers

Nearest neighbours by meaning across the whole index.

Scene Reconstruction Using Ubiquitous Wireless Signals via Diffusion Posterior Inference Over physics-Grounded Representations

cs.LG ·2026-10-15 ·Vahid Yazdnian, Yasaman Ghasempour
similarity 0.67
Abstract

Knowing the layout of the physical world matters for many applications, yet the sensors we rely on for it (e.g., cameras and LiDAR) can fail in darkness, in adverse weather, or behind walls. Wireless signals do not face these limitations: every link between a base station and a user is shaped by the buildings it passes, reflects from, or is blocked by, leaving information about the surrounding scene embedded in the wireless channel measured at the endpoints. However, mapping channel measurements to the environment is a severely ill-posed problem: a measurement records only the structures that interact with the transmitted electromagnetic waves along its propagation paths, and even these observations can often be explained by multiple plausible scenes. We therefore formulate wireless scene reconstruction as posterior inference and develop a hierarchical framework with two complementary stages to approach this problem. A wireless foundation model, pretrained to respect propagation physics, transforms each channel measurement into a representation of the scene structure that shaped the observation. A diffusion model then jointly integrates representations from multiple measurements to model and sample the posterior over building occupancy, with consensus over samples producing the final reconstruction. We demonstrate that the framework can accurately recover building footprints from wireless channel measurements alone and show that its performance depends critically on both design components: physics-grounded representations expose scene-relevant information, while joint posterior inference coherently integrates complementary observations.

0.17

RadioTraj3D: Height-Aware Adaptive Sampling for 3D Radio-Map Reconstruction from Ultra-Sparse Trajectories

eess.SP ·2026-10-30 ·Zixuan Guo, Xiucheng Wang, Wenshuo Chen, Conghao Zhou, Chuan Huang +2 more
similarity 0.62
Abstract

Aerial networks require radio propagation information at unvisited positions and heights to plan routes, select links, and allocate wireless resources. A three-dimensional radio map (3D RM) represents propagation conditions over the service area, enabling these decisions before flight. However, constructing such a map from autonomous aerial vehicle (AAV) measurements is challenging, since radio measurements are available only along the trajectory, whereas the target covers the 3D service volume. Existing methods use fixed AAV trajectories that ignore how building distributions and heights affect electromagnetic propagation, missing the heights most informative for RM reconstruction. To address these issues, we propose RadioTraj3D, which uses building-height information to coordinate measurement selection and layer-wise reconstruction. Building-height variations reveal propagation-sensitive layers that guide height-adaptive sampling. We therefore propose G-METS to select geometry-sensitive heights and allocate an exact budget across edge, corridor, and open regions before channel acquisition. A dual-view reconstructor then integrates local three-dimensional boundaries with full-height context through one bounded coefficient per layer. Simulated outdoor and indoor maps demonstrate state-of-the-art reconstruction across environments and vertical grids. On real-world AAV measurements from the LACN dataset, RadioTraj3D improves peak signal-to-noise ratio by 0.84 dB and reduces normalized mean squared error by 17.5% over Completion AE.

0.32

Site-specific Channel Modeling Based on Remote-Sensing Maps for 6G Space--Air--Ground Digital Twins

eess.SP ·2026-08-31 ·Peijie Liu, Pan Tang, Jianhua Zhang, Lei Tian, Bin Ao +2 more
similarity 0.59
Abstract · 17 pages, 23 figures, 4 tables

Site-specific channel models are essential for wireless digital twins of 6G space--air--ground communication systems. However, 3D maps are difficult to obtain over wide areas, which limits large-area site-specific channel modeling. To address this issue, this paper proposes a remote-sensing-based augmented ray-tracing channel modeling framework. The framework comprises a deterministic RT branch, a measurement-statistical branch, and an RT augmentation branch. To overcome the difficulty of acquiring large-area 3D maps, the deterministic RT branch reconstructs a 3D RT scene from satellite remote-sensing imagery and calibrates its electromagnetic material parameters using measured path loss. To provide the statistical parameters required for RT augmentation, the measurement-statistical branch establishes the marginal distributions and interparameter dependence models of the channel parameters. Specifically, a wideband UAV channel measurement campaign is conducted at 4.60 GHz, and a proposed multipath estimation method estimates the complex amplitudes, delays, and Doppler shifts of the measured multipath. To bridge the gap between RT predictions and measurements, the RT augmentation branch organizes the RT multipath into LoS, LoS-tail, and NLoS components, generates additional short-delay LoS-tail paths, and reallocates the component and path powers according to the measurement-derived statistics while preserving the total RT received power. The validation results show that the proposed framework reduces the path loss RMSE from 5.45 to 4.35 dB and, relative to calibrated RT, decreases the RMS delay spread and normalized Doppler spread RMSEs by 53.03 and 26.48, respectively. The proposed framework provides a site-specific channel modeling approach for 6G space--air--ground digital-twin studies.

0.26

Wireless Networks That See: Integrated Sensing and Communication in Complex Environments

cs.NI ·2026-11-01 ·Xingqin Lin
similarity 0.59
Abstract · 7 pages, 6 figures

The same radio interactions that complicate wireless communication can reveal what is happening around a network. Integrated sensing and communication (ISAC) turns these interactions into opportunities to observe unmanned aerial vehicles (UAVs), road vehicles, and industrial mobile robots. Yet a strong echo is not necessarily a reliable object observation: stationary background can conceal motion, reflections can create virtual objects, and one viewpoint can leave part of an object's motion unobserved. This tutorial explains how known cellular signals are used to estimate propagation, suppress stationary background, interpret reflected paths, and combine observations from different sites. UAV examples under a Third Generation Partnership Project (3GPP) stochastic channel model and ray tracing in a San Francisco urban scene illustrate the mechanisms through spatial layouts, channel profiles, and before/after range--Doppler maps. Local checks reduce false outputs, with some loss of detection. Cooperation improves position accuracy for UAVs detected by both a single site and cooperating sites. The examples show how signal resources, measurement reporting, and application needs shape sensing performance, providing practical guidance for sensing services in complex environments.

0.53

Enhancing 3GPP Urban Channel Models For Terrestrial-to-Non-Terrestrial Communication

eess.SP ·2026-08-28 ·Gerhard Schreiber, Chenrui Sun, Joerg Schaepperle, Le-Hang Nguyen, Thorsten Wild
code/data similarity 0.59
Abstract

We have developed enhanced models for large-scale channel parameters intended for terrestrial-to-non-terrestrial (NTN) communication in Urban environments for supporting devices above ground levels, such as drones. The models are formulated as functions of terminal height above ground and elevation angle, applicable to S-Band and Ka-Band frequencies. To ensure realistic models, an open-source 3D scene generator was utilized to create a diverse set of urban scenes across Europe. Sionna ray-tracing was employed to generate path-gain samples for outdoor terminals, covering a range of heights up to 300 meters and elevation angles up to 90°. Our proposed analytical functions show excellent agreement to ray-tracing data for line-of-sight (LOS) probability, shadow-fading (SF), and clutter-loss (CL). Furthermore, a comparative coupling gain analysis with existing 3GPP models reveals notable differences, particularly caused by smaller CL and higher LOS probabilities from proposed models. Designed for ease of use, these models can be seamlessly integrated into simulation tools, offering a practical solution for researchers and engineers.

0.35

AI-Enabled Wireless Propagation Modeling and Radio Environment Maps for 5G Aerial Wireless Networks

eess.SP ·2026-09-22 ·Gautham Reddy, Kürşat Tekbıyık, Bryton Petersen, Antoine Lesage-Landry, Gunes Karabulut Kurt +1 more
published similarity 0.58
Abstract · Submitted for possible publication in IEEE JSTEAP

With the gaining prominence of aerial mobility applications, their success depends on the seamless integration of terrestrial and non-terrestrial network connectivity. However, providing reliable connectivity from terrestrial telecommunication networks remains challenging due to multi-cell interference from base stations (BSs) under line-of-sight (LoS) conditions to unmanned aerial vehicles (UAVs), coverage holes caused by antenna sidelobe degradation, localized multipath fading effects, and the high-speed dynamics of aerial users. To model such complexities, often exacerbated by sparse real-world data, this work proposes a dual-stage radio environment map (REM) framework. Our approach physically decouples the channel modeling, where a spatial Transformer first anchors the deterministic, large-scale path loss geometry, while a gated recurrent unit (GRU) subsequently extrapolates the stochastic, localized fast- fading deviations. By reformulating 3D spatial interpolation as a 1D radial sequence prediction task, the framework inherently aligns with the physics of propagation. We evaluate the proposed framework against state-of-the-art baselines, including 3D Kriging, UNet, Mamba, and Inception, using empirical 5G datasets. The results demonstrate improved intra-site generalization across diverse altitudes, user dynamics, and reference signal received power (RSRP) datasets, achieving signal-strength predictions with errors near 3 dB and REM spatial-similarity indices exceeding 0.75. Finally, we examine the influence of REMs and channel rank conditions on UAV channel quality, underscoring the necessity of reliable channel modeling for robust aerial connectivity.

0.33

GLocFM: A Geometry-Aware Foundation Model for 3D Indoor Wireless Localization

eess.SP cs.AI ·2026-08-10 ·Chenghong Bian, Chaozheng Wen, Hongze Chen, Jun Zhang
similarity 0.58
Abstract · 13 pages, single column

Learning-based wireless localizers often fail to utilize geometric information about the propagation environment, limiting their ability to exploit non-line-of-sight (NLoS) propagation and generalize across scenes. To bridge this gap, we propose GLocFM, a Geometry-aware Localization Foundation Model, which jointly exploits WiFi measurements and scene geometry represented as a 3D point cloud. We formulate localization as a maximum-likelihood (ML) estimation problem, where the goal is to find a transmitter position that maximizes the likelihood of the wireless observations conditioned on the scene geometry. The likelihood of a candidate transmitter position is calculated by a learned scoring function that matches the observed delay--angle-of-arrival (AoA) spectrum against the spectrum predicted for that candidate. A hierarchical scene encoder extracts propagation-relevant features to produce geometric priors for LoS and one-bounce reflection paths. For scenarios with imperfect synchronization, we further introduce a time-of-flight (ToF)-robust GLocFM model to handle unknown ToF offsets. GLocFM is trained on a multi-modal synthetic indoor localization dataset comprising 221 diverse scenes whose associated wireless signals are generated using Sionna RT. On both synthetic and the NeRF$^{2}$ dataset based on real measurements, GLocFM reduces mean 3D localization error relative to one of the state-of-the-art localization baselines by 49.5\% and 48.8\%, respectively. Ablations across different number of receiver, bandwidths, and array sizes further demonstrate the effectiveness and robustness of the proposed framework.

0.40

Radio Map Construction with Post-Hoc Location Calibration under Quasi-Static Positioning Errors: Joint Estimation, Performance Bounds, and GNSS-Based Evaluation

eess.SP cs.NI ·2026-09-10 ·Koki Kanzaki, Katsuya Suto, Koya Sato
similarity 0.57
Abstract · 16 pages, 11 figures. This work has been submitted to the IEEE for possible publication

Radio maps enable environment-aware wireless and Internet-of-Things applications and can be constructed from location-tagged received signal strength (RSS) measurements collected by mobile devices. In urban environments, temporally correlated GNSS errors can shift an entire sensing trajectory, causing systematic spatial misregistration that is not mitigated by collecting more measurements. This paper presents a radio-map construction framework that uses the radio measurements themselves to calibrate erroneous location tags after data collection. The dominant positioning error is modeled as a sensor-specific quasi-static offset, which is jointly estimated with radio-propagation parameters in a Gaussian process regression (GPR) framework by exploiting complementary spatial information from distance-dependent path loss and spatially correlated shadowing. We establish lower and upper bounds on the conditional Bayes risk and show that, under a translation-invariant trajectory model, trajectory information alone cannot identify the quasi-static offset, thereby motivating the use of RSS-derived spatial information for calibration. Numerical evaluations across propagation conditions show that the proposed method reduces the mean squared error (MSE) gap from ideal GPR to approximately $3.26\mathrm{dB}^2$, compared with about $10\mathrm{dB}^2$ for position-error-agnostic and noisy-input GPR baselines. Evaluation using positioning-error models derived from smartphone GNSS measurements shows that the proposed method outperforms a KF--RTS trajectory-smoothing baseline despite unmodeled time-varying positioning errors, remaining within approximately $5\mathrm{dB}^2$ of ideal GPR at the median MSE. These results demonstrate that RSS measurements can serve not only as observations for radio-map reconstruction but also as spatial cues for post-hoc calibration of imperfectly geotagged sensing data.

0.38